Changes made in SO needs to be sent back to customer in ORDRSP

Dear Experts,
           As per the client req, we configured the IDOC message type "ORDRSP" for customer purchase order confirmation. Also when ever any changes made in the sales order then, automatically another ORDRSP will get populated and sent to customer.
       But issue is, now customer wants to know which data got modified. Meaning, Quantity, price, schdule date got modified then, accourdingly customer wants to know the status that which fields got modified.
         Example if Quantity got modified then, customer wants the status as (e.g. ACTION) like "Item accepted-Qty modified". 
            if Schedule Date got modified then, customer wants the status as (e.g. ACTION) like "Item accepted-Date modified"
But we were not able to sure how to achieve this requirement by capturing the changes made in the sales order since its very difficult to capture the changes happened in sales order.
Please give your valuable feedback on this issue.
Warm Regards,
     Nag

Hi,
first, standard IDoc does not support what your customer requires. The report RVSCD100  gives you log of changes for SO. You can try to use it for your requirement. At time of change you would check log and figure out what was changed. You can define a new custom message or extend standard IDoc with additional info.
Cheers

Similar Messages

  • Xtrmly urgent : In Case of PO change, the whole IDoc needs to be sent

    Hi All,
       I'm sending PO change IDoc using Message Control ( Process code ME11, function-module IDOC_OUTPUT_ORDCHG, message type ORDCHG).
      In case of mutiple line items PO, if i'm changing a few line items ( but not all ), PO Change IDoc is sent with only those items which are changed.
      But I need to send IDoc with the whole PO with all line items, even if there is change in a single line item.
    Pls suggest me. It's xtrmly urgent. Thnkx in advance,
    Rudresh
    Mumbai

    No..I'm not using change pointers concept. I did modification in partner profile and now I'm not using ME11 for sending PO change IDoc. Instead , I'm using ME10 only with 'Change Des' checkbox ticked.
      This has solved my problem to a great extent. But if I delete, a line item in case of Multiple line item PO, IDoc is not being created. In case of ME11, it was being created in case of deletion of a line item also.
    Please suggest me...
    Thanks,
    Rudresh
    Mumbai

  • Time Capsule needs to be sent back to the design shop!!!!

    Clearly this product has serious compatibility issues and needs a lot more work to be part of the Apple family of high quality products.
    Mine is going in the bin!

    Hard to really address anything or try and help since you haven't posted a question, or provided any specifics.
    Personally I'm pretty happy with the design. Looks nice and runs well, we're pretty happy with our unit. I've got one older external drive that isn't recognized when I plug it into the back of Time Capsule, but considering the age of the 3rd party drive I'm not complaining. Besides, there's a reasonable chance that with the next firmware upgrade, that drive may wind up being supported.
    Sorry to hear you're having trouble with yours.
    Trilo

  • Changes made to iTunes Library.xml keep reverting back

    I'm helping a friend with his computer.  He uses an external harddrive for all his iTunes music.  Lets call this drive "iTunes HD".
    He wants to move his collection to a newer bigger drive.  So he mirrors the content to a new harddrive.  Let's call this drive "New HD".
    We remove the old drive called "iTunes HD" and launch iTunes whiles holding down the option key and select the iTunes folder on "New HD".
    It finds the library and lists the songs, but can not find any of the songs.   It's looking for each file in "/Volumes/iTunes HD" and not the new drive.
    We exit iTunes.
    I vi the "iTunes Library.xml" and globally replace "iTunes HD" with "New HD" and save the file.
    We relaunch iTunes and again it can not find any of the files and when I get information on them it's still looking in "/Volumes/iTunes HD".
    We exit iTunes and reopen the "iTunes Library.xml" file and all the changes have been undone and reverted back.
    So I reapply all my edits and this time move the ""iTunes Library.itl" to /tmp to get it out of that directory.  And relaunch iTunes.
    Now it comes up with no Library of music at all.  So I go to "File > Library > Import Playlist" and select the xml file I just finished fixing.  I says Importing Playlist and then nothing happens.  Cursor comes back and there's still nothing in the Library.
    I have to move the "iTunes Library.itl" from /tmp back into the directory and relaunch iTunes for it to see the Playlist again.  It still can't play them because it's still referencing the old "iTunes HD" which we removed.
    How do I fix this?

    In iTunes go to Edit > Preferences > Store and turn off
    Show iTunes in the Cloud purchases
    Share details about your library with Apple
    On any iOS device go to Settings > Music and turn off
    Show All Music
    Close and reopen iTunes and/or reset the device and you should see your version of the metadata for each track rather than the original store data.
    tt2

  • I need to work on documents in both my iMac and air book. But I have to download document and them upload it, and when I upload it I can't open it unless I open it on my phone first. Yet changes made on phone appear straight away. Does this make sense????

    I need to work on documents in both my iMac and air book. But I have to download document and them upload it, and when I upload it I can't open it unless I open it on my phone first. Yet changes made on phone appear straight away. Does this make sense????

    On your Macs open System Preferences > iCloud
    Deselect the box next to Documents & Data, then reselect that box then restart your Macs.
    On the iPhone tap Settings > iCloud. Switch Documents & Data off then back on then reset the iPhone.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
    See if you can open the files now without opening on the iPhone first.

  • Changes made to .css file in adf application, Does need to run the page again

    Hi Gurus,
    Please explain me, Changes made to .css file in running adf application, Does need to run the page or just refreshing page from browser will pickup the changes for oracle ADF 11g R2.
    Warm Regards,
    Md Jahangir Pasha

    Hi,
    you have to set CHECK_FILE_MODIFICATION parameter value to "true" on web.xml file.
    <context-param>
        <param-name>org.apache.myfaces.trinidad.CHECK_FILE_MODIFICATION</param-name>
        <param-value>true</param-value>
      </context-param>

  • Report for abserving changes made to the customer master and moniter

    Report for abserving changes made to the customer master and moniter and detail
    Please send with t. code.

    Hi Dhari,
    Well the requirement seems very simple but its not as simple as it looks.
    i have an idea not sure whether it gonna work or not. you need to build a history cube as if i understand your requirement then for any selected period you wanna see the change in wage type or pay rate for each employee if any.
    1. pick up an cube that builds on emp transaction data.
    2. add the 0empoyee Md, wage type and pay rate from MD to the cube and fill the cube
    3.so now every day or in scheduled time interval the MD will load and the corresponding the TD will be loaded to the cube.
    4. create a info object say indicator and add it to the cube
    5.while loading the data to the cube everyday in tranformation check if for same employee there is a change or not in the wage type and pay rate. If so set the indicator to 1.
    4.now build one more cube for holding the changed records from this cube and call it say zhrchange
    5. now pull the date, year and related emplyee information for the emplyee to the zhrchange for those with indicator 1.
    6. before the next load happen, rememrbe to set the indicator to 0 before checking the conditoin in the transformation routine , so that only if the conditoin satisfy then only it will be 1 else it will be 0.
    now the cube zhrchange has all the changed records with time stamp and you can base your query on that to get the changed values in specific time period
    hope this helps.

  • My account was accessed and unauthorized changes made by We R Wireless

    I recently became a ware of a very serious issue and have been getting little assistance from Verizon.  My account was password protected and had only 3 people identified as having the ability to make changes on my account.  I received a notice from Verizon regarding a change made on one of my lines.  Upon review it was an unauthorized change to add "Total Mobile Protection" to one of my lines for $9.00 a month.  Also in this notice was a credit which I was entitled to for a $10.00 Active Promotion.  I believe this credit was placed on the account so that the change might slip by unnoticed.   When I looked into the change it was made by a Representative from We R Wireless in Ship Bottom NJ.  I have never been to this store nor have I spoken with anyone ever at this store.
    After calling the store and confirming my account was accessed and unauthorized changes made, I was told by the manager that an employee had in fact accessed my account and made those changes.  I still could not understand how it was possible for the changes to have been made without my password.  The activity certainly looked very suspicious and I figured it had to do with commission to the representative for adding the insurance plan.  This was denied multiple times by the manager of the store as well as the District Manager.  In the meantime I had received multiple emails from We R Wireless in their attempts to "Make this go away"
    What came next was the most disturbing and upsetting part of this situation.  I was told by the District Manager of WE R Wireless that my information they had collected years ago during a purchase of a phone and activation INCLUDING MY PASSWORD and that they had kept it in their system!!
    WE R Wireless had shared my personally identifiable information and Password to my account with Sales representatives at the Ship Bottom WE R Wireless store  and that was how they accessed my account!!
    As you can imagine I have now been receiving multiple calls from The Director of Retail Operations, Musafa as well as the Director of Operations, Jimmy.  They are attempting to sweep this under the carpet and it is inexcusable and unacceptable.  The reason for this post is to WARN others who may have made purchases at anytime at a We R Wireless store that they KEEP YOUR PASSWORD and employees are given the Passwords and have made changes to accounts.  I cannot believe that I am the only one that this has happened to and I am concerned this is a widespread breech and more importantly is ILLEGAL.
    I will keep this Board updated with developments but can tell you so far Verizon has not been very responsive to my concerns but this is unacceptable and I am thinking of contacting the FCC as well as an Attorney.  In this day and age of Identity Theft this situation must be addressed by Verizon whether or not this was one rogue employee or not our PASSWORDS and other Information should never be shared nor kept without our knowledge.
    >> Edited to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    I can only tell you that the Verizon rep from the Fraud department as well as Verizon's legal department contacted me and said under no circumstances are these companies to retain Customer Passwords.  As you can see look at the potential for issues as evident in this situation.
    As far as the FCC and their responsibilities this is directly from the website
    The Federal Communications Commission regulates interstate and international communications by radio, television, wire, satellite and cable in all 50 states, the District of Columbia and U.S. territories. An independent U.S. government agency overseen by Congress, the commission is the United States' primary authority for communications law, regulation and technological innovation. In its work facing economic opportunities and challenges associated with rapidly evolving advances in global communications
    The agency investigates consumer issues such as Cramming which has occurred here if you go to the site you will see some of the recent fines for cramming levied by the FCC and it is a huge issue.  A consumer does not get involved in legal fees the FCC is responsible to investigate consumer claims of fraud and regulates the industry.  The Attorney General also takes this very seriously as well.
    Cramming - Unauthorized Charges on Your Phone Bill
    Cramming Settlement for Consumers Announced
    Dec. 19, 2014: The FCC, along with the FTC and state attorneys general, announced a $90 million settlement with T-Mobile regarding unauthorized charges - commonly known as "cramming" - on phone bills.
    Current and former T-Mobile wireless customers should review their bills and apply for refunds if they suspect third party charges were wrongly added to their bills at www.t-mobilerefund.com/
    Sent from my iPad

  • How to track changes made in the ERD in oracle designer

    I want to track all changes made in my ERD in oracle 10g designer. Please suggest how to achieve it.
    use case: An ERD was approved in design phase. Few changes were made by development team and now in Implementation phase I need to track what all changes were made from say 3-Jan-12 to 3-Mar-2012
    Edited by: 909570 on Mar 5, 2012 1:14 PM
    To add here:
    Designer Version is 10.1.2.0.2.
    1. In my project versioning of ER is not being used so ER Version diff is not an option for me.
    2. In Reports, there are options for getting all entities, attributes which are created/modified in a period. But it seems it is not giving me correct results.
    Edited by: 909570 on Mar 5, 2012 1:14 PM

    Since versioning if off, there is no way to track changes.
    You can get a rough overview of possible changes by looking at the audit attributes (date created, date modified) in the properties palette, but that is already mentioned in your point 2.
    Basically, developers should comment what they added/modified.

  • How to find out the changes made to a photo in numbers rather than in graphs..

    How to find out the changes made to a photo in numbers rather than in graphs..

    We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • How to find out the changes made to the customized table entries

    Hi Team
    i want to know the changes made to the customized table. i have a 'Z' table in my production system, in that table i would like to know whether any table entry is deleted or not. if at all there is any deletion happened, i want to know who had done it.
    So i request you to please let me know the procedure for the same.
    Thanks
    Raj

    Hi Nagaraju,
                       Go to Table Maintenance (SM30)- Display mode-- Utilities-- change Logs. Give the Date range. before giving the date range click on display status , this will show you If the display is active or not. Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • How to track changes made to the standard objects by SAP during upgrade ?

    Hi All,
    Can any one of you please let me know if there is any straight forward method to find any change made to the standard objects by SAP in different versions ?
    Like for eg, during upgrade from 4.6c to ECC 6.0.
    Thanks in advance.

    > For eg , if SAP has made any change in the standard  transaction IE02,  in ECC 6.0 how will we come to know those changes?
    There are two sources for that:
    The "Solution Browser" (http://solutionbrowser.erp.sap.fmpmedia.com/) which lists the differences between source and destination release and the release notes (http://service.sap.com/releasenotes). You'd need to read here all those from 4.6 to ERP 6.0 (so 4.7, ECC 5.0 and ERP 6.0) to find out the behaviour changes.
    Markus

  • Tracking changes made to the finance quotation(CRMD_ORDER) line item

    Hi All,
    I want to track or identify changes made to the line item of a Finance quotation in Transaction CRMD_ORDER. User may change any where(any tab) at line item level.
    I found that CRM_ORDER_READ function module has one import parameter IV_ONLY_CHANGED_OBJ. I tried to make use of this, but could not identify the changes.
    Appreciate if anyone can provide me a better solution.
    Thanks in advance.
    Regards,
    Prasad

    Hi Anirban,
    I'm developing some program, i need some FM or sample code to findout the changes made to the line item. Not in the GUI.
    Thanks and Regards,
    Prasad

  • How to see the changes made in tx code MN05

    Hi all,
    Do you know how can I see the changes made in tx code MN05?
    I need to know when was The output condition updated? Do you have a change record on this change?
    Thanks and regards

    Hi,
    There is a Transaction code SCU3 to display the change logs
    Goto the Transaction code and enter the  Table for MN05 and execute, it will display all the logs for MN05.
    If you didnt find any change logs here, then you have to activate the Change logs for this table.
    To activate the change logs , goto SE11 and give the table and clcik on the technical settings and you will find the Check box with CHANGE LOGS.
    Check whether it was activated or not, if not activate it.
    Thanks,
    santosh

  • Locking PDF but only allow further signatures & get the list of of changes made after signing

    Hi,
    I have looked at Adobe Acrobat 9.0 and found the Signing > locking feature which blocks any changes after the document is signed. I need to know whether using Acrobat SDK, one could implement a similar locking option via plugin in a way that it ONLY allows further blank signature fields to be created or sign existing ones and locks all other changes. If possible, any pointers to API functions would be appreciated.
    If the above is not possible using Acrobat SDK 9.0 then can the SDK provides a list of all the set of changes made after the signing is performed (at the time of verification) in the form of some codes which can guide the plugin author about what change after signing was done e.g.
    a blank signature field was signed
    a blank signature field is created
    watermark has been applied
    form is filled
    sticky notes/stamps/other annotations are added
    Regards,
    mwak

    Thanks for your response. I have just performed this:
    I signed a PDF ( having no prior signature or blank signature fields ) using Adobe Acrobat 9.0 and locked it. I am now not able to create more signatures on this PDF. I believe I can't add more signatures even using the Acrobat SDK and Lock means complete lock-down of the document. This is different to what you said " it restricts modifications EXCEPT for other signings" or may be I am not understanding it clearly.
    I created two blank signature fields. When I clicked on the first, there is no Lock settings at the time of signing. I believe because If it is locked then the next signature can't be signed. With only a single signature field present, the lock feature is there.
    So I believe I have to resort to the option of identifying the changes in a revision and then if it the change is related to say adding stamps, sticky notes prompts the user at the time of verification.
    Can some one point me to the API functions set which identify list the objects which have changed after signing.
    Regards,
    mwak

Maybe you are looking for

  • How can I use the button in one panel to control the other panel's appearing and disappearing?

    How can I use the button in one panel to control the other panel's appearing and disappearing? What I want is when I push the button on one button . another panel appears to display something and when I push it again, that the second panel disappears

  • Supress authentication check from within ABAP code

    Hi, we want all users to update their email-address in their own sap profile. (a self service) By default, in the screen "System"->"User Profile"->"Own Data", he can update all except his email-id. For this, we have written an abap report. DATA: p_sm

  • Link Source reports in BIXI3.0 to Target report

    Hello Friends Please help me resolve this i will be grateful to all sdn friends if you can help me with this I have two reports 1. Trial Balance 2. Trial  based on OLAP BI Infocube universes. I want to Jump from Trial Balance to "Trial" Report by cli

  • Lost songs from playlist / can't drag songs in playlist

    Hey I created a playlist of about 7 hours and seem to have lost a whole bunch of songs without deleting them and now can't move anything around in that playlist. My other playlists appear to be working fine. Any ideas? Thanks! Kirsty

  • How can I uninstall Skype for modern UI from windo...

    Hi, I am running the tech preview of windows 10.  I exclusively use desktop mode and have Skype for Windows desktop installed.   I have never installed Skype for Modern UI.   However when I receive an incoming call I get two call answer dialogs, one