Link Source reports in BIXI3.0 to Target report

Hello Friends Please help me resolve this i will be grateful to all sdn friends if you can help me with this
I have two reports 1. Trial Balance 2. Trial based on OLAP BI Infocube universes. I want to Jump from Trial Balance to "Trial" Report by clicking on the GL Account from Source report "Trial Balance" to Target report = "Trial"
I right clicked and in New Hyperlink I put this code
Spath is for the Folder since reports are in my favorites . if this is not required please sugget
aLL Reports in webi has this kind of link so please me how to make the correct hyperlink
http://nbc-tst-bibo-01:8080/InfoViewApp/listing/main.do?appKind=InfoView&service=%2FInfoViewApp%2Fcommon%2FappService.do&loc=&initialFolderId=null
Please send me the link to BO XI 3.0 Open document url which I have for xi2.0 but i think its not working
URL Incorrect format
u201C<a \u201Chref=http://nbc-tst-bibo-01:8080/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp&sType=wid&sPath=My Favorites,Trial,&sDocName=Trial&sRefresh=Y&lsSG/L Account Key=u201D[G/L Account Key] \u201D>[G/L Account Key]u201D
Also I tried the below which does not work
='<a href=http://nbc-tst-bibo-01:8080/businessobjects/enterprise115/desktoplaunch/jsp/aa-open-inlist.jsp?url=http://nbc-tst-bibo-01:8080/businessobjects/enterprise115/desktoplaunch/jsp/openAnalytic.jsp?DocumentExt=wid&DocumentId=Trial&mode=full&sWindow=New&nbPrompts=1&lsSG/L Account Key='[G/L Account Key]' target=hiddenFrame>''Click Here''</a>'
Edited by: soniya kapoor on Nov 10, 2008 12:59 AM

Hi Soniya,
These are the steps:
1. Log in into infoview
2. Change the preferences (Click in the Preference button in the main tool bar), in the WebIntelligence section change the Select a default view format: to Interactive.
3. Click OK
4. Open the report where you want to add the hyperlink
5. Right click in the column or cell to add the hyperlink
6. Click Hypelink > New
7. You will see the Create Hypelink window, click Browse the select which report do you want to link
8. Fill in the parameter, prompts, etc.
and that's it, hope it's clear now. If you have any question let me know.

Similar Messages

How to show a variable screen when clicking on direct link of report in ,when that report is used as target in RRI alsoRRI

Hi All,
I have created RRI between two reports and the type is web template/WAD.
My requirement is to show the variable screen of target report when clicked on direct link and it should not show the var. screen if it goes from jump/go to.
while currently I can not see var. screen on both the places and when switching the var. scree. display on in web template , it shows the screen at both the places.
Please suggest.
Thanks,
Anu

Hi Anu,
"And when I am using another var. in assignment details which is ready for input (in both the queries), its not helping."
Did you try using such a variable? What kind of a problem do you face? I am sorry I am still trying to understand your problem. I am just saying that which variable you use is not important for the first query. Only in the second query, add a variable with ready for input (I am not sure why the other doesn't work, I just tried and it gave an error, that's why I suggest this) and in RRI connection make the assignment with this variable. Please try this and let me know the result.

Link between Base and Target report

Hi All,
We have a scenario. We have a base report based on a Custom Object from which we are passing a field value (which uses a joined field value from Product Object) to another target report based on another Custom object which matches the values passed from the base report(link field).
Also in the Base Report we have specified the Navigation report and prompted the link fields accordingly in both the reports
But when we click on the hyperlink in the base report, the matching values are not displayed
Both these reports are REAL TIME reports. We tried the same kind of link between these two Objects using Account Name and it is fetching the matching records.
What can be the reason behind this? Is it because we are passing the Joined field value as the reference to the target report the matching records are not shown?
Kindly share your ideas.
Thanks and Regards,
Sabarish

it could be that the formula for that filed in both the custom objects is different 'coz of which its not working

Naviagting to a target report

I have a master report that has action links that navigate to target reports. Is it possible to pass a value other than the column that is clicked on by the user? Currently they can click on the "Region" field and the target report adds the region to the filter criteria. Can I somehow pass more than one filter to the target report?
I am basically trying to minimize the number of reports that we need to create and maintain.
Would it be possible to have the report with a few filter options then pass the selection criteria to the target report?
Message was edited by:
DavidG

David,
This is defiantly something you can do. Current i use one report as the information report and several others to filter information off this for Example additional addresses.
All you need to do is create the Primary report and then on the field that is unique "Customer ID" click on the filter advanced and then results based on another report select the same field and you are done.
Hopefully this answers your question.

Is there is a way to have a link from purchase order to cost center report.

Is there is a way to have a link from purchase order to cost center report.
I am meaning kind of:
Standard way to customized this link?
or
User exit to have this link in place
or
Any other solution
Thanks

For me it does not make any sense from going from PO to cost center report.
However, if you want to see the purchase order cost incurred with a cost center, execute KSB1 report. Within the layout, bring "Purchasing Document" field, where you can see the purchase order number in cost center line item report.

Actual vs target report for sd module

if any having actual vs target report for sd module pls forward me..
my requirement is i would like to find the monthwise core and monthwise actual sales totals and rebate for the particular product ..

How are you doing the data entry for target (or budget) ? Is it thru CO module ? Have you activated CO-PA ?

Is it possible to put a link (hyperlink) on a row in a report!!

I need to know if it is possible to put a link (hyperlink) on a row in a report via a form or other method. The link will be different for each row.
I know you can add a column link but this will be the same link for each row.
I also know its possible using websheets.
However i am using an interactive report and form in a database. APEX 4.1.
The best method would be through a form. When the user creates a new entry for a row he can also add a link.
Edited by: user12629904 on Aug 21, 2012 8:23 AM

How do you propose to built the link? Is it embedded in a table? Built by a function? Yes, you can have a link in a report, just as a column like a date and an image..
If you offer more information, maybe SOMEONE can offer up more help..
Version of APEX?
More details on the links?
Thank you,
Tony Miller
Dallas, TX

Dynamic Sources for a field in Oracle Reports

Hi there,
I am sure someone might have encountered this problem.
I have six Queries in Data Model. Based on certain parameter value, I need to change the source field setting for each field in the report
output.
e.g in Report LayOut Model, I have a field F_1. The source for this field in
the Property pallette is COL1 which is coming from Query1.
I need to assign a new source based on parameter value for field F_1 to
COL2 from Query2 or COL3 from Query3 or COL4 from Query4, COL5 from Query5, COL6 from Query6 in the Before Report Trigger. Is there any way to achieve this using srw or any other PL/SQL code?
This way I can save a lot of devlopment time and use a single physical layout for six different reports and avoid the hassles of creating frames,
repeating frame and formatting.
Any help greatly appreciated.
Let me know if something is not clear in the email. I will provide
additional information

Ashok,
Looks like you've landed in the wrong Forum - this one is for Oracle HTML DB.
Thanks,
- Scott -

Drilldown Report-Drill on month filter target report from Jan-drilled month

Hi All,
As in requirement is to have a chart on parent record which has Month(Close Date Month of oppty) and based on click to navigate to target report showing opptys till the selected month.eg. if user clicked on March then Opptys from Jan - March should show up accod to Close Date.
I am stuck as I make the Month(Close Date) column as prompted in target report it is getting filtered on the only one Month.If i Click on March target report is showing only for March records which is by design ofcourse.
Another Drilldown has to be from a Chart where in Bar chart shows revenue per month.
Any prompts will be really helpful.

Got it to work!!!
Using filtering on another analysis.

Link a Column on a Report to another column on report on another page Drill

I would like the user to click on a column value on a report which then should open another page and filter the report to show the related value which was clicked. Basically I would like to create a hyperlink between two reports as in Drill Down Report.
Edited by: RahulnDeepti on Feb 17, 2010 3:24 PM

Hi your question is about APEX (other forum)
but you have to read this turtorial http://download.oracle.com/docs/cd/E14373_01/appdev.32/e13363/rprt_drill.htm#CIHGBADI

Ssrs report web service to save report as pdf throws error Soap exception unhandeled by user code

I am creating a C# web application to save an SSRS report as a pdf file on my local machine.
I added the ReportService web reference as RS2005 and ReportExecution2005 web reference as RE2005.
http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx?WSDL
http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx?WSDL
I created the following function SaveReport that is called on button click. My report can be accessed on the report server with the following url:
http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter
On the Report Manager home page the report link appears as "SAMPLE LETTER".
It is deployed in the DataMgmt folder on the Report Manager.
It uses a data source called "DS Letter" with option "Credentials stored securely in the report server"
My application gets compiled, but I get the following run time error:
Error: Soap exception unhandeled by user code. The item '/DataMgmt/Sample Letter' cannot be found. ---> Microsoft.ReportingService
s.Diagnostics.Utilities.ItemNotFoundException: The item '/DataMgmt/Sample Letter' cannot be found.
Please check my code and let me know what I can do to run this successfully. Once this is done, I would like to get help with passing a parameter (memberID) to the generate report for that member, through this application.
Thank You in advance for your help.
public static void SaveReport()
RS2005.ReportingService2005 rs;
RE2005.ReportExecutionService rsExec;
// Create a new proxy to the web service
rs = new RS2005.ReportingService2005();
rsExec = new RE2005.ReportExecutionService();
// Authenticate to the Web service using Windows credentials
rs.Credentials = System.Net.CredentialCache.DefaultCredentials;
rsExec.Credentials = System.Net.CredentialCache.DefaultCredentials;
rs.Url = "http://myServer/ReportServer_DEVPROJECT/ReportService2005.asmx";
rsExec.Url = "http://myServer/ReportServer_DEVPROJECT/ReportExecution2005.asmx";
string historyID = null;
string deviceInfo = null;
string format = "pdf";
Byte[] results;
string encoding = String.Empty;
string mimeType = String.Empty;
string extension = String.Empty;
RE2005.Warning[] warnings = null;
string[] streamIDs = null;
string fileName = @"c:\temp\samplerHAPeport.pdf";
string _reportName = @"/DataMgmt/Sample HAP Letter";
string _historyID = null;
bool _forRendering = false;
RS2005.ParameterValue[] _values = null;
RS2005.DataSourceCredentials[] _credentials = null;
RS2005.ReportParameter[] _parameters = null;
try
_parameters = rs.GetReportParameters(_reportName, _historyID, _forRendering, _values, _credentials);
RE2005.ExecutionInfo ei = rsExec.LoadReport(_reportName, historyID);
RE2005.ParameterValue[] parameters = new RE2005.ParameterValue[1];
if (_parameters.Length > 0)
//parameters[0] = new RE2005.ParameterValue();
//parameters[0].Label = "";
//parameters[0].Name = "";
//parameters[0].Value = "";
rsExec.SetExecutionParameters(parameters, "en-us");
results = rsExec.Render(format, deviceInfo,
out extension, out encoding,
out mimeType, out warnings, out streamIDs);
using (FileStream stream = File.OpenWrite(fileName))
stream.Write(results, 0, results.Length);
catch (Exception ex)
throw ex;
protected void BtnGenReport_Click(object sender, EventArgs e)
SaveReport();

Hello Devster,
Thank you to post your question on TechNet forum.
After reviewing the whole post, I have a question to you. You can access the report via the link, http://myServer/Reports_DEVPROJECT/Pages/Report.aspx?ItemPath=%2fData+Mgmt%2fSample+Letter.
From the URL, I can see that the report is located at: /Data Mgmt/Sample Letter, instead of /DataMgmt/Sample Letter. In addition, I found that the target report is "/DataMgmt/Sample HAP Letter" instead of "/DataMgmt/Sample Letter" as the error described. I
am not sure whether you post out the correct code segment.
Please check the above things on your side, and hope it is helpful to you.
Regards,
Edward
Edward Zhu
TechNet Community Support

Updaing SQL 2005 Report Builder Reports (based on Report Models) to SQL 2012 Report Builder Reports?

We are upgrading from SQL 2005 to SQL 2012 directly (no SQL 2008 to be installed). We have many SSRS Reports written in Report Builder 1.0 against Report Models generated from an OLAP datasource. In SQL 2012, Report Models can no longer
be created or edited. I have found many posts on this topic, including this:
http://social.msdn.microsoft.com/Forums/en-US/896522da-45c3-46c0-848a-16f8f02ab051/how-to-upgrade-report-models-from-report-builder-1020-to-30. which the 'answered' response states:
SQL Server 2012 Reporting Services does not include tools for creating or updating report models. Although you can continue
to use existing report models as data sources in SQL Server 2012 Reporting Services reports you should consider updating your reports to remove their dependency on report models.
But I cannot locate any instructions/documentation, etc. on how to go about "updating your reports to remove
their dependency on report models.". How do I take existing Report Builder 1.0 reports that point to Report Models and upgrade them to the new SQL 2012 without Report Models? Is there a way to convert them? Or, do they need to be rewritten
from scratch? If there is a link to these instructions, please post as I cannot locate it any where. Thank you.

Katherine thank you for helping with this. Here is what I have tried:
On the Report Manager (2012) site, I created a new OLAP data source. And when I test the connection, I get the pop up "Connection created successfully."
I then pointed my Report Builder (v1.0) report to this new Data Source (from Report Manager site, selected 'Manage' for the report, from Data Sources, selected Browse and drilled down to the new Data Source I created and selected Apply).
Now when I try to View the report, I receive the following error:
An error has occurred during report processing. (rsProcessingAborted) Query execution failed for dataset 'paramDataSet'. (rsErrorExecutingCommand) The SemanticQuery element at line 7, column 279 (namespace http://schemas.microsoft.com/sqlserver/2004/10/semanticmodeling)
cannot appear under Envelope/Body/Execute/Command.
I then exited IE and reopened the Report Manager site. I opened Report Builder 3.0,, selected Open and opened this same report. Idrilled donw to Data Sources and right clicked on dataSource1 (the only one listed) and selected Data
Source Properties. I kept the same name, but selected the new shared datasource I created (New DataSource), and selected OK.
Next, I drilled down to Datasets. There are two listed, dataSet and paramDataSet (yes, this report has parameters). I right clicked on the dataSet and selected dataSet properties, and see that it points to dataSource1 (which is the dataSource
I just pointed to my New DataSource). I cancelled and checked the Data Source for paramDataSet, and it also points to dataSource1. Selected cancel and went back to the main dataSet.
So both datasets point to the new DataSource I created.
If I select Run, I get the following error:
I select OK and right click on dataSet and select Refresh Fields and get this error:
Can you (anyone) please explain what I am doing incorrectly? Thank you.

Creation of report with the help of report painter

Dear Experts,
I need report painter material, if any body have pls farward to me.
my intension to create controlling report with the help of report painter.
I am ready to award full points.
Thanks in advance
Regards
avudaiappan
Moderator - Please read this:
/thread/931177 [original link is broken]
Thread locked

Hello Chinasammy,
Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
Advantages of Report Painter include:
Flexible and simple report definition
Report definition without using sets
Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
=============================================
Below mentioned is the process for creating reports using Report Painter as a tool.
Selecting and maintaining a library for your report: As the transfer structure to Report Painter you use a report table, which is defaulted by SAP and can not be maintained. This table contains characteristics, key figures and predefined columns. In a library, you collect the characteristics, key figures, and predefined columns from the report table, which you need for your Report Painter reports.
When you define a Report Painter report, you assign it to a library. Reports assigned to one library can only use the characteristics, key figures, and predefined columns selected for that library.
When you create or maintain a library, the Position field determines the sequence in which the characteristics, key figures or (predefined) key figures appear in the Report Painter selection lists when you define a report. This allows you to position the objects that you use regularly in your reports at the beginning of the selection lists. If you do not make an entry in the Position field, you will not be able to use this object in Report Painter reports.
You can use either the standard SAP libraries for your reports or define your own.
(ii) Selecting or maintaining a standard layout for your report: Standard layouts determine report layout features and the format of your report data.If the SAP standard layouts do not meet your reporting requirements, you can create a new standard layout or change an existing one.
(iii) Defining row and column models: A model is a one-dimensional, predefined reporting structure that you can insert in either the rows or columns of your report.If you often use the same or similar row or column definitions in your reports, it is recommended that you create row or column models.
You must define the row and/or column models that you want to include in your report definition before you define the report.
You can also use the standard column models supplied by SAP.
(iv) Defining the report: Defining a Report Painter report involves the following steps.
(a) Define the report columns: You define the report columns using the characteristics, key figures, and predefined columns selected for the library that the report uses. Alternatively, you can use a column model for column definition. Column models are predefined column structures which you insert into your entire column definition, instead of defining each individual column.
(b) Define the report rows: You define the report rows using the characteristics selected for the library selected for the report.
Alternatively, you can use a row model for your row definition. Row models serve the same purpose as column models, but are used to define a report row.
Edit and format the report rows and columns in line with your requirements. (For example, you can hide rows or columns, define the column width or define colors for your report rows).
(iii)Define general data selection criteria for the selection of your report data: Selection criteria are the characteristics used to select data for the entire report. You cannot enter characteristics as data selection criteria if they are already being used in the report rows or columns.
(iv) Assigning the report to a report group: Once you have defined a report, you must assign it to a report group. A report group can contain one or more reports from the same library. However, reports that share the same data will select data more quickly and improve processing time.
Hopw this helps you. Please let me know if you need anything more and assign points.
Rgds
Manish

Crystal report 2008 for B1 Join report of open PO, good receipt, good retur

Hi All,
I am new to crystal report for B1. I am developing a report for showing all open purchase order, good receipt, good return, A/P Invoice and A/P credited memo rows for selected project.
This is similar to open item report, but I need to show detail rows (items) for each of those Document. I can easy do a select token with project code for only one type of those document e.g. open purchase order (link OPOR with POR1 and select records by project code).
My question is how to do a report with those 5 types document together. I did try to include all those tables, but I canu2019t find a link between them. Or Can I do something link sub reports to include all those report by using one selection token? How can I do it?
Any comment, ANTHING will be very much appreciated!!

Hi Julian......
yes you are correct use OLE DB connection and when it shows your PC Connection then just put the necessary information related to SQL server and DB for which you want to create this query.
Once you put all these info then click on next and then finish.
It will show you the Command option and one more option in expand and collapse format where all the tables and views of database are present.
Just double click on command and paste your query report and add it......
Now its set to design CR for your query as per requirement.....
Regards,
Rahul

SAP BO Report Scheduling and Save as report using Java SDK

Hi All,
We have a java product which is integrated with SAP BO using Java SDK and we have certain java screen through which we select report prompt values and webi report gets run.
Now we want to give a functionality to save report to BO repository.
When user select certain check box from java screen a separate copy of the webi report should get saved under default folder on BO repository.
Also, we want user to choose the scheduling option from java screen only (and not the one which we use from BI Launchpad) due to certain access restriction. User does not have access to BI Launchpad. Only he can run report by selecting values through Java screen.
If i need to create a separate screen for scheduling as well as saving webi report then also i am ok with it.
P.S. i guess we need to work on Java SDK level. But could somebody please help me with the right direction?
Let me know in case requirement is not clear.

Hi Ketan,
As you are on version BI 4.0 SP5 and would be migrating to BI 4.1, the best SDKs to use would be the Restful Webservices SDKs.
You have the options to schedule a webi report with prompts as well as the save feature which you require.
Please refer to the webi restful guides avialble at
For BI 4.0 SP5
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_webi_restful_ws_en.pdf
For BI 4.1 SP4
http://help.sap.com/saphelpiis_sbo41sp4wi-sdk/frameset.htm
Refer to the below blog to understand the Restfull Webservices SDKs.
http://scn.sap.com/community/restful-sdk/blog/2013/09/07/scripting-web-intelligence-the-restful-raylight-web-services--learing-it
More blogs on Rest are available at
http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bblogpost%5D
You can find the samples from the below link
http://scn.sap.com/community/restful-sdk/content#filterID=contentstatus%5Bpublished%5D~objecttype~objecttype%5Bdocument%5D
You would need to refer to the community below in case you have concerns about Rest SDKs.
http://scn.sap.com/community/restful-sdk
Thanks,
Prithvi

Link Source reports in BIXI3.0 to Target report

Similar Messages

Maybe you are looking for