Changes of CC (profit center) in master data and balance sheet side in PCA

HI
Organizational assignments are not managed as time-dependent in the asset master record.
We want to change the assignment to a cost center, which is in another PC.
The system then automatically run ABUM with appropriate standard transaction type as a default for the posting transaction.
Which standard transaction type is appropriate to reflect change in balance sheet side in PCA ?

The best for this is to use the transaction ABUMN - Transfer within Company Code  and not to make the change with AS02

Similar Messages

  • Profit center wise P&L and Balance Sheet for 12 segments as per AS-17

    Hi Experts,
    I am woking in ECC 6.0. My Client has 12 Segments. 10 Cost Centers. They want segment wise P&L and Balance Sheet. Pl advise how to map..The options are :-
    1.  Use segment reporting - if i define 12 segments = 12 profit centers, then the problem is one to one assignments of profit centers to cost centers as there are only 10 cost centers and profit centers will be 12.
    2. Should i go with Business ?
    3. Will the Profit Center approach help ? then again one to one mapping to cost centers is not possible...
    Pls help...its urgent
    Regards
    Pyare

    Hello
    This is posible if you use the New GL functionality in ECC 6.0
    The New GL functionality works on the totals table FAGLFLEXT instead of the GLT0 which was used in the Classic GL. The Segment field is a standard field in the table FAGLFLEXT.
    For creating segement wise financial statements,
    1. You have to first define the segments in the enterprise structure
    2. Link the PC to the segments (you have field for segment in the PC master data)
    3. The standard report (S_PL0_86000028) will generate the segment financial statements for a FSV.
    Thanks,
    Anvesimo

  • Profit Center Accounting in ECPCA and New GL

    Hi Friends,
    We want to use the ECPCA profit center accounting for managment reporting. Also we are using new GL therefore we also have Profit Center accounting accounting.
    Can we just go with ECPCA, if yes what would be the dis-advantage of not using New GL profit center accounting.
    Also can we use the both, if yes then do we need to take care of something specfic which you would like to suggest.
    Thanks in Advance

    Hi,
    Thanks for the SNote. But now I am in a fix.
    Note says that if I use the new GL and document splitting then I should not use the EC-PCA.
    But my client do not want the cost center allocations to come in FI due to Regulatory constraints i.e no CO-FI reconciliation, however want to see the profitability at profit center level, as well as balance sheet at profit center level.
    If I use EC-PCA for giving profitability at at profit Center level then I will not be able to use document splitting in New GL to give the balance sheet at profit center level.
    And if I use New GL then I cannot give the profitability at profit center level as allocations are not there in FI.
    Have anybody faced a similar issue, if yes can throw a light on the same.
    Thanks & Regards,
    Ankur

  • Mass change "segment" in profit center master

    Hi Dear,i am trying to mass change "segment" in profit center master,first i make segment changable,then i try mass change "segment",but that feild not appeared in mass change view,can someone advice,thanks

    Hi,
    The segment can't be changed in the profit center once the document has been posted. But you can create a new profit center with new validity periods with new segment.
    Regards,
    SMuvva

  • Change Segment in Profit center to which the data has already been posted

    Hi,
    Is it possible to change Segment in a Profit Center to which the transaction data has already been posted.
    Regards,
    SAPFICO

    Hi,
    The segment can't be changed in the profit center once the document has been posted. But you can create a new profit center with new validity periods with new segment.
    Regards,
    SMuvva

  • Changing the "Reconciliation Account" in the master data of a Customer

    Hi All,
    I've to change the "Reconciliation Account" in the master data of a Customer. But this fiel has been made not modifiable.
    Could anyone tell how change this?
    Thanks,
    Gandalf

    Hi,
    In SPRO, change the field status for the customer account group to optional. Then you can change the reconciliation account of the customer.
    The Path -
    SPRO>>Financial Accounting (New)>>Accounts Receivable and Accounts Payable>>Customer Accounts>>Master Data>> Preparations for Creating Customer Master Data>>Define Account Groups with Screen Layout (Customers). Here select the account group for the customer and double click on the line. In this screen, double click on Company code data. Then change the field status in Account management for Reconciliation account.
    Hope this helps.
    Thanks and Regards,
    Anit

  • Change account groups in vendor/ customer master data

    Hi,
    Do you think is possible to change account groups in vendor/ customer master data?
    Thanks

    Hi,
    Good evening and greetings,
    Changing the account groups will redetermine the Reconciliation account, which will be creating a chaos during Audit Reconciliation. But if there is a requirement, please go through the following link
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/55f534545a11d1a7020000e829fd11/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Difference between Activating Master Data and Attribute Change Run

    Hi
    Is there any difference between Atribute change run and Activating Master data functionaaly???
    if wha it is???
    can any one explain clearly?
    Thanks
    Chinna

    When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
    When u create a characteristic and if u keep it as master data and activated..it is master data activation
    Activating Master Data
    When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
    For more information, see Versioning Master Data.
    Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
    Upon Activation there are two scenarios to choose from:
    The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
    If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
    1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
    2. Proceed as described in System Response upon Changes to Data: Aggregate.
    The system now automatically restructures and activates the master data and its aggregates.
    Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
    The Corresponding Master Data Is Not Used in Aggregates:
    Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
    The system now automatically activates the master data so that it can be used directly in reporting.
    If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
    if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
    Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
    Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

  • What happens internally while loading master data and transaction?

    hello,
    What happens internally and which tables are used while loading master data and transaction?
    I have loaded the data in DSO, but i am not getting value of particular InfoObject after loading the data.
    I have executed Attribute change run also.
    Kindly explain ...
    Thanks,
    Sonu

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • Different profit center in Project definiton and  WBS

    Hi,
    Our client facing a problem for closing the project due to  different profit center. In Project definition  the assigned on profit center and WBS they assigned another different profit center . There is not data posted or planed .
    SAP won't allow me to change the Profit Center because it says the project is released.
    Now they try to  close the project but it showing error like different profit center in project definition and  wbs.
    Could you please anybody help to solve this issue?
    Thanks.
    V.K

    From the error message It seems there is a validation using Field exit. Ask your abaper to debug. Then would be able to know the logic behind it.
    Venkat

  • SAP BPC 7.5: Master Data and Hierachiy Load from InfoObject

    Hallo Forum Participants,
    I am going to load Master Data from a "Clarity" Reporting Tool in BW to SAP BPC 7.5 via Process Chains (/CPMB/IMPORT_IOBJ_MASTER, /CPMB/IMPORT_IOBJ_HIER) delivered from SAP.
    These Process Chains load the Master Data and Hierarchies from an InfoObject. To find out more about Ticking of BPC I have performed a following test. So, on BPC Admin Interface I have duplicated the Dimension u201CAu201D and called it as Dimension u201CBu201D (in BW site InfoObject u201CAu201D and u201CBu201D). In the Member Sheet of Dimension u201CBu201D I have implemented the several changes und tried to load Master Data from BW namely from infoObject u201CBu201D into BPC Dimension u201CAu201D. Therefor I created a transformation file and mapped one for one IDu2019s. The data Manager started these chains, but resulted nothing (Status: red X).
    What are the features of BPC InfoObjects in Comparision with regular InfoObject?
    How can I load Hierarchies into InfoObject?
    What else I must take into account?
    Why does not work this simple test?
    Regards.
    Alisher
    Edited by: Alisher Babaev on Jan 6, 2012 1:59 PM

    Hallo pkrishna,
    so it is successed with master data load, but without hierachiies.
    My Master Data Properties on Dimension Sheet are:
    -ID
    -EVDESCRIPTION
    -PARENTH1
    -CURRENCY
    I have mapped as below:
    ID=ID
    CURRENCY=/CPMB/CURR
    /CPMB/CURR- my technical id in BW.
    In the Note you advised transformation file has been mapped like below:
    -NODENAME=NODENAME
    -HIER_NAME=HIER_NAME
    -PARENT=PARENT
    -ORDER=ORDER
    After executing of package i get whether rejected list or log file. No data can be retirieved from InfoObject.
    Have you any Idea?
    regards

  • BPC 7.5 NW: Import master data and Hierarchy from BI

    There is a HTG about Import master data and Hierarchy from SAP NT BW, the BPC cost center master data's property have corresponding attribute  InfoObject 0COSTCENTER of BW.
    what about for those properties which do not have corresponding attribute in BW? I would asume that START_ROUTINE and END_ROUTINE will do this in BPC side,  can we also do this on BW side instead of BPC side?

    Hi,
    You can check this in start routine which can be called from Transformation file using BADI.
    http://help.sap.com/saphelp_bpc75_nw/helpdata/en/28/b66863b41f47589b9943f80b63def6/content.htm
    Hope this helps...
    regards,
    Raju

  • Combining HR Report Categories - Master Data and Payroll

    Hello Colleagues,
    Scenario: 500 PERNRs to be processed in a report
    - 300 have Master Data + Payroll Results in the SAP system
    - 200 have only Master Data ( Payroll is managed outside the SAP system )
    For reporting purposes we need to pick up data from cluster + external source ( excel sheet for ex ). The current report has reporting category Payroll and is capable of processing only PERNRs who have payroll results in the SAP system.
    The GET PERNR event does not get triggered for PERNRs who have only Master Data and hence the processing of PERNRs whose payroll results do not reside in the system does not happen.
    Requirement: One selection screen to process selected PERNRs ( combination of internal + external )
    Solution: ??   Any ideas on possible workarounds would be appreciated.
    ~ Vishwa
    PS: Changing the report category to Master Data is a huge change and I am trying to avoid this.

    The problem here is that the PERNR list is not available and it has to be based on the selection screen parameters. The user could select any combination based on the LDB selection fields. It could be based on Payroll Area or PA PSA .......

  • What is the Sequence of Master data and Transaction data R/3 to APO

    Hi guys,
    What is the Sequence of Master data and Transaction data R/3 to APO  through CIF?

    Hi,
    Master data,
    Material Indipendent data can be sent without any dependency.
    Material Dependent data sequence is as follow.
    Plant,
    MRP areas,
    Supply area,
    Material,
    MRP area material,
    planning material,
    ATP check,
    Purchase info recards,
    schedule agg,
    PPM or PDS (But before PPM or PDS  work center should send to apo) If PDS is sending then BOM should send before PDS.
    Transaction data.
    As per the business requirement what is planning in apo.
    Regards,
    Kishore Reddy.

  • How to load master data and hierarchies from R/3 systems

    HI all,
    how to load master data and hierarchies from R/3 systems.
    Please explain the steps.
    Thanks,
    cheta.

    HI,
    Its normally done following: Transferring the master datasources in RSA5 to RSA6 and then replicating the DS into BW and assignment of DS to Infosource and cretaion of Infopackage and load it into the master tables.
    Generally, the control parameters for data transfer from a source system are maintained in extractor
    customizing. In extractor customizing, you can access the corresponding source system in the source
    system tree of the SAP BW Administrator Workbench by using the context menu.
    To display or change the settings for data transfer at source system level, choose Business
    Information Warehouse → General Settings → Maintaining Control Parameters for Data Transfer.
    Note: The values for the data transfer are not hard limitations. It depends on the DataSource if these
    limits can be followed.
    In the SAP BW Scheduler, you can determine the control parameters for data transfer for individual
    DataSources. You can determine the size of the data packet, the number of parallel processes for
    data transfer and the frequency with which the status IDocs are sent, for every possible update
    method for a DataSource.
    To do so, choose Scheduler → DataSource → Default Settings for Data transfer.
    In this way you can, for example, update transaction data in larger data packets in the PSA. If you
    want to update master data in dialog mode, smaller packets ensure faster processing.
    Hope this info helps.
    Thanks,Ramoji.

Maybe you are looking for