Changes to Standard SAPScript of F.27 Tcode

Hi,
I found the script name that is getting generated the execution of F.27 Tcode (i.e- R140_ACC_STAT_01) and also found its respective print program(i.e - RFKORD10). I copied them both into z-script and z-driver respectively. Now the amount which is shown in the print-preview needs to be bifurcated into two new columns based on SHKZG value (i.e- S for Debit column and H for Credit column). I discovered that the amount is being rendered from RF140-WRSHB element in SAPScript. So where and how would I be able to put the SHKZG delimiting condition before the amount (&RF140-WRSHB&) is getting displayed? Do I need to make use of subroutine in SAPScript for the same??
I would appreciate any help.
Thanks & Regards,
Rakesh Nair

Hi Rakesh,
I understand that you requirement is to bifurcate Amount based ondebit or credit.
You can use IF command to dispaly amount in particular column.

Similar Messages

  • QM - QC21 change the standard Sapscript with a smartform

    Hi experts !
    I need to customize the standard printprogram linked to QC21 with a smartform instead of the sapscript and specific selections.
    It seems that a lot of people did that but only with a specific sapscript.
    I have made a specific Output types (V/34), a copy of LQCA. And I have defined processing routines.
    My questions are :
    Do I have to create a specific certificate profile as well?
    How does output types works with the transaction QC21 ?
    Is there kind of best practices when changing RQCAAP01 (after copying in a z prog) ?
    Please guide me.
    Benjamin

    > How can I change it in a SAPScript or within a Smartform?
    >
    for smartforms
    in the smartforms transaction
    enter the formname which you want to change , and from menu Goto->Object Directory Entry , now you can edit the package , using the change mode option.
    For script.
    go to Transaction SE03
    Now you can see Object Directory entry option, press the change button.
    (change object Directory entries)
    Enter FORM in the input for object type, it comes in this way, now check the checkbox.
    check  RETR  FORM   <formname>
    press F8,
    Now you will see the option to change the Directory entry in the result screen.

  • Track changes for Standard Heirarchy Cost Center details( Tcode: OKEON)

    Hi all,
    I have a requirement to track the changes for <b>Standard Heirarchy Cost Center</b> data and whenever it change i need to initimate with email to certain group of people in organization.
    Transaction code : OKEON .
    Whenever standard heirarchy get changes then i need to send email to certain group people .
    My findings and questions are as follows :
    1. I understand that the changes can be track by using CDHDR table .
    2. What is Object Class for Standard Heirarchy Cost Center  ?
    3. Is there any standard report available for that please let me know .
    4. How to track the changes when Cost center Group got changes ?
    5. Is there any exits or BADI for this requirement ?
    Please respond this question as soon as possible . For every useful answer points will be awarded.
    Appreciate your help.
    Thanks.
    Mark

    You can try using the option GoTo - Change Documents, which is available, when you display cost center hierarchy.
    Regards
    Rakesh Pawaskar

  • Logo in standard SAPScript

    Hi all,
    I am working on standard SAPScript, In that I am facing the problem with logo , I have to include my companys logo.
    Thus I had change standard   ADRS_HEADER using so10 Tcode. The logo is coming but in left side of the header window as it requires on write side although the IDES  logo is on write side.
    Thanks and Regards
    R Satalkar

    Hi R Satalkar,
    Do you use the BITMAP command to place your logo graphic? You can use the XPOS and YPOS paramaeters to place yuor logo differently. please see the SAP Note:
    307414 - Documentation on SAPscript command BITMAP
    Regards,
    Aidan

  • Standard SAPScript

    Hi,
    Is there any standard SAPScript available for tcode f-02.
    Regards,
    Vijaya B.

    hi ,
    check out this link ..
    all standard scripts are stored in the TNAPR table .
    [http://www.sap-img.com/sapscripts/create-scripts-of-your-own-using-standard-scripts.htm]

  • Unable to change ADF standard text for af_table ("Fetching data...")

    I wish to change the standard "Fetching data..." text displayed by ADF when scrolling through a table.
    Looking at the description in http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html, I expect to achieve this by overriding "af_table.LABEL_FETCHING" in my skinning resource bundle.
    I am able to override two af_column messages, but my af_table override does NOT work.
    My bundle looks like this;
    package com.vesterli.demo.skinning;
    import java.util.ListResourceBundle;
    public class MySkinBundle extends ListResourceBundle {
    @Override
    public Object[][] getContents() {
    return _CONTENTS;
    private static final Object[][] _CONTENTS =
    { { "af_table.LABEL_FETCHING", "Hang loose, dude" },
    { "af_column.TIP_SORT_ASCENDING", "First things first" },
    { "af_column.TIP_SORT_DESCENDING", "The last shall be the first" } };
    My trinidad-skins.xml looks like this:
    <?xml version="1.0" encoding="windows-1252" ?>
    <skins xmlns="http://myfaces.apache.org/trinidad/skin">
    <skin>
    <id>vesterli.desktop</id>
    <family>vesterli</family>
    <render-kit-id>org.apache.myfaces.trinidad.desktop</render-kit-id>
    <extends>fusion.desktop</extends>
    <style-sheet-name>css/MySkin.css</style-sheet-name>
    <bundle-name>com.vesterli.demo.skinning.MySkinBundle</bundle-name>
    </skin>
    </skins>
    Since I am seeing my customized column tip texts correctly, the reference from trinidad-config.xml to my skin should be OK (I am also seeing my visual skinning correctly). Since I am seeing some of my texts, my resource bundle must be valid, too. I am using JDev 11.1.1.3.
    So why doesn't the af_table skinning work?
    Any pointers appreciated.
    Best regards
    Sten Vesterli

    I was having this problem too, found this thread and did cleanup here and there, redo etc. But ended up with no luck to fix it.
    Just now discovered the issue is reproducible on the official demo site: table Skinning Key Demo
    1. check the column sorting labels, prefixed with "Demo: "
    2. change any selector setting to trigger a table refresh, it's always displayed as "Fetching Data...", without prefix.(as highlighted in the "Resource styles" on the same page, there should be prefix too).

  • Need to Change the Standard.joboptions on Acrobat 8.0

    We are a Citrix/Terminal Server shop and have clients using Acrobat 8.0 on the server under their citrix session and they need to have the default resolution of the created PDF to change for everyone on the server from 600 dpi to 300 dpi.
    When I try to do this in the printer setup for Acrobat it tells me that I can't edit the Standard.joboptions file and save it over itself. I then tried to manually edit the file with Notepad and it is still showing 600 dpi when I look at the Standard settings.
    I also changed the Standard and set it as 300 dpi and saved it as a different name in the "Settings" folder and when I try to choose it in the drop down list of settings files I don't see that one.
    Am I missing something? How can I set the default resolution to 300?
    Thanks,
    Jason

    I don't see how to do that. Is there a document or online resource to help with that?
    Like I said, I saved the changes to another file but then do not see a way to specify that new file as the 'default'.
    Thanks,
    Jason

  • Changes in standard form

    Hello,
    I have a standard transaction MI21 for physical inventory.
    I need to change the standard form and attached back to this transaction.My first query is how to find the form name in standard program? program name is RM07IDRU.
    Can i copy the original form in zform and make a changes and attach it back to standard program.
    How to do this?
    Please let me know as its an urgent.
    Waiting for positive reply.
    Thanks
    Suchita

    Forms are  INVENT  and INVENT_VKBW you can use either of these accrding to your requirement.
    But if you copy it to Z form then you will be needed to copy the program and then change form names in OPEN_FORM.
    Reward points if useful.
    Regards,
    Nageswar

  • How to change The Standard JOptionPane Icon?

    in this simple code
    i want to change the Standard JOptionPane icon to a different icon
    how could it be?
    thank you
    import java.awt.*;
    import javax.swing.*;
    import java.awt.event.WindowListener;
    import java.awt.event.WindowEvent;
    import javax.sound.sampled.*;
    import javax.swing.JPanel;
    import javax.swing.JFrame;
    import javax.swing.ImageIcon;
    import javax.swing.Icon;
    import java.awt.event.*;
      public class MyFrame extends JFrame 
    JLabel label=new JLabel("Hello");
      MyInner inner;
          MyFrame ()
            setupGUI();
        private void setupGUI()
           JFrame f =new JFrame();
        //   f.setDefaultCloseOperation (JFrame.EXIT_ON_CLOSE);
           f.setTitle("Window Event");
            f.setSize(550,350);
            f.setResizable(false);
            f.setLayout(new BorderLayout());
            f.add("Center",label);
            f.show(true);
             inner=new  MyInner();
             f.addWindowListener(inner);
                   class MyInner extends WindowAdapter
           public void windowClosing(WindowEvent ee)
                         Toolkit tool = Toolkit.getDefaultToolkit();
                  tool.beep();
                      JOptionPane.showMessageDialog(null, "Nice Work! " );
                      System.exit(0);
          public  static void main(String[]args)
             MyFrame frame=new MyFrame ();
    }

    For instance:
        class MyInner extends WindowAdapter
            public void windowClosing(WindowEvent ee)
                Toolkit tool = Toolkit.getDefaultToolkit();
                tool.beep();
                JOptionPane.showMessageDialog(null, "Nice Work! ");
                ImageIcon myImageIcon = new ImageIcon("myPic.jpg"); // needs proper path here
                JOptionPane.showMessageDialog(null, "Better Work!", "Dang, I'm smart!", JOptionPane.ERROR_MESSAGE, myImageIcon);
                System.exit(0);
        }

  • Mass changing of folder names in CRM under tcode COMMPR01

    Hi Experts,
    Good day!
    I would like to ask help regarding mass changing of folder names in CRM in tcode 'COMMPR01' under documents tab. I tried to change the folder name of one material but it only updates the folder name for that specific material and not for the whole CRM box. Is there a way for me to do a mass change of name for the folders in CRM? Can this be done in customizing(SPRO)?
    Thank you,
    Christian del Rosario

    Hi Christian,
    Welcome you post on the forum.
    However, here is not for question of your CRM module. It is the forum for SAP Business One E-Commerce and Web CRM. If you are not using B1, close your thread.
    Thanks,
    Gordon

  • How to batch change the standard value of routing

    Dear all,
             I meet a problem, and need you help.
            As you know, we can use T-code "CS20"  to batch change a component's quantity in different Bom by a factor.
           for example:  Component a in Fert. A,  quantity change from 6g x 0.9 = 5.4g
                               Component a in Fert. B,  quantity change from 8g x 0.9 = 7.2g
           now, my question is how to Batch change the standard value in routing. (select by work center)  CA85N can select the value, but seems can not batch change by a factor,
           thanks in advance

    It is not a big task for u prasobh...Just play in CEWB for 5-10 mins you will understand everything....
    If you face any issue let me know..
    For ur information I am also an IBM employee...
    Gobi

  • Webdynpro for ABAP, Enhancement and change of standard "visible" property

    Hi
    Is it possible to change the standard Webdynpro element (in cProjects application), so that the original control "Input" from visible property "Visible" is changed to mine Context variable? How to change that default "Visible" flag in standard element?
    thank you

    Hi Phani,
    Thanks for the info.
    I am able to see if it is not interactive.
    Displaytype is native only.
    Let me explain you the issue in detail:
    Currently Client is calling ZFORM thro Java. They have some issues with JAVA so they want to use Webdynpro to call that ZFORM and the form is ABAP Dic based.
    For Templete source I gave ZFORM name, and it automatically created a 'NODE' wrt the context in the ZFORM.
    Now I have to pass data from difft  node attributes to that 'NODE'.
    Thanks in advance,
    GG

  • How i can change to standard user, an admin user

    Hi,
    How I can change to standard user an admin user, if the check box can not be unchecked.
    I have opened the lock to allow for future changes.
    I have more than one admin user.
    As root user, I can't do it.
    Thanks.

    Hi,
    I have, but looks the same, unable to change.
    I finally decided to create a new standard user and delete this.
    Thanks for the support.

  • Change of Standard Currency Translation Logic

    Hello everybody,
    I need to achieve special goal to for a user request:
    In a BPC planning application using version 5 MS I would like to import data from another data source and perform a currency translation from LC to RC. The application is NOT set-up as a YTD application, as the planners should be able to input data on a periodic basis (i.e. month). So the default currency tranlation would take the LC amount from one month and multiply it with the rate for this month giving the amount in RC.
    I need to change the FX trans logic in a way that the LC amounts are summed up first and then the multiplication with the last FX rate is taken, i.e. similar to a YTD consolidation application. I do not want to change the existing appl into a YTD-appl as monthly input is needed.
    Therefore I need to change the standard FX trans logic from, let's say, "multiply each monthLC value by FX rate and then build the YTD value" into "sum-up each month LC value giving YTD LC value and then multiply by FX rate of the last month".
    Can I achieve that by tweaking the standard FX logic or do I need to set-up a certain FX Business Rule? Do I need a new measure ? How would the coding look like ?
    Any help is appreciated.
    Thanks.
    Wolfgang

    Does nobody have an idea how to attack such a challenge ?

  • Changing TV Standard - CRASH! Opening iDVD'04 project

    I raised this before, was hoping that the 7.0.2 update was going to fix but no.
    Is anyone out there from Apple? Helloooo! You have a defective product that I paid
    for and can't use. do you care?
    This is the displayed message when opening a project that was made with iDVD '04
    "Changing TV Standard
    Changing the TV standard will require iDVD to encode all previously encoded assets again."
    Which is total BS anyway as the standard has not changed, it was 4:3 PAL in the project and it is 4:3 PAL in the preferences
    Rapidly losing faith with Apple.
    This is in the console log:
    ===== Thursday, 3 July 2008 00:36:03 Europe/London =====
    2008-07-03 00:36:31.174 iDVD[285] * -[NSPanel window]: selector not recognized [self = 0xa563040]
    An exception of type NSInvalidArgumentException occured.
    * -[NSPanel window]: selector not recognized [self = 0xa563040]
    Stack trace:
    1 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    2 +[NSException raise:format:] (in Foundation)
    3 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    4 -[NSObject(NSForwardInvocation) forward::] (in Foundation)
    5 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    6 _objcmsgForward (in libobjc.A.dylib)
    7 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    8 0x0000bb58 (in iDVD)
    9 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    10 -[NSAlert didEndSheet:returnCode:contextInfo:] (in AppKit)
    11 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    12 -[NSAlert buttonPressed:] (in AppKit)
    13 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    14 -[NSApplication sendAction:to:from:] (in AppKit)
    15 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    16 -[NSControl sendAction:to:] (in AppKit)
    17 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    18 -[NSCell _sendActionFrom:] (in AppKit)
    19 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    20 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
    21 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    22 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
    23 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    24 -[NSControl mouseDown:] (in AppKit)
    25 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    26 -[NSWindow sendEvent:] (in AppKit)
    27 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    28 -[NSApplication sendEvent:] (in AppKit)
    29 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    30 0x000feca8 (in iDVD)
    31 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    32 0x001144c0 (in iDVD)
    33 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    34 0x000d1d38 (in iDVD)
    35 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    2008-07-03 00:36:31.413 iDVD[285] NSExceptionHandler has recorded the following exception:
    NSInvalidArgumentException -- * -[NSPanel window]: selector not recognized [self = 0xa563040]
    Stack trace: 0x96c2bf10 0x92c0ee0c 0x92be7ed0 0x90a460b0 0x0000bb58 0x939b2f3c 0x9399df04 0x938518b4 0x938517e8 0x938516c8 0x9386b664 0x9386b24c 0x9386ac70 0x9380c4e0 0x937b5524 0x000feca8 0x001144c0 0x000d1d38 0x000d0228 0x000cb0d0 0x000cb328 0x000241d8 0x00009688 0x00008810 0x938ef7c0 0x938518b4 0x938517e8 0x938516c8 0x9386b664 0x9386b24c 0x9386ac70 0x938ef11c 0x9380c4e0 0x937b5524 0x937ac960 0x9389d458 0x00004e38 0x00003b9c 0x000038a0
    An exception of type NSInvalidArgumentException occured.
    * -[NSPanel window]: selector not recognized [self = 0xa563040]
    Stack trace:
    1 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    2 +[NSException raise:format:] (in Foundation)
    3 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    4 -[NSObject(NSForwardInvocation) forward::] (in Foundation)
    5 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    6 _objcmsgForward (in libobjc.A.dylib)
    7 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    8 0x0000bb58 (in iDVD)
    9 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    10 -[NSAlert didEndSheet:returnCode:contextInfo:] (in AppKit)
    11 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    12 -[NSAlert buttonPressed:] (in AppKit)
    13 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    14 -[NSApplication sendAction:to:from:] (in AppKit)
    15 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    16 -[NSControl sendAction:to:] (in AppKit)
    17 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    18 -[NSCell _sendActionFrom:] (in AppKit)
    19 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    20 -[NSCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
    21 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    22 -[NSButtonCell trackMouse:inRect:ofView:untilMouseUp:] (in AppKit)
    23 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    24 -[NSControl mouseDown:] (in AppKit)
    25 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    26 -[NSWindow sendEvent:] (in AppKit)
    27 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    28 -[NSApplication sendEvent:] (in AppKit)
    29 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    30 0x000feca8 (in iDVD)
    31 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    32 0x001144c0 (in iDVD)
    33 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    34 0x000d1d38 (in iDVD)
    35 taskstartpeeking: can't suspend failed (ipc/send) invalid destination port
    ##**## Not encoding -> exit(5)

    As a test I took an old iDVD 4 project on my 933 mhz G4 running Panther and saved it as an iDVD ARCHIVE with include Themes and Encoded Assets checked.
    I then opened it on my 1.33 Ghz G4 Powerbook running Tiger and iDVD '08.
    It 'sort of worked'. Things opened fine but I had a broken asset warning on video in the menu button. I was able to drag and drop the movie on the menu in the Map view to get rid of the broken asset warning, but the movie in the menu button doesn't play. The projects preview fine, but without the movie playing in the button.
    Conclusion: an iDVD 4 PROJECT ARCHIVE with Themes and Encoded Assets included DOES open in iDVD '08, but may require some fixing.

Maybe you are looking for