Changing an asset during material post.

Hi i have a such task:
MIGO, operation Good issue. I need to change asset card in time of posting material.
I find a badi mb_migo_badi, method post_document and try to change asset here by using BAPI_FIXEDASSET_CHANGE.
but after my changes SAP changes an asset itself and my changes are canceled.
Have anybody a good idea about this?

Hi, Erwan. Yes, I use BAPI_TRANSACTION_COMMIT, and see my changes are exist in ANLA but then SAP finished its work and my changes are canceled.
i need to post changes after sap but how ...
Message was edited by:
Evgeniy SEMENIKHIN

Similar Messages

Change BSEG-ZUONR during the Post Goods issue.

Hi
We wanted to Update the BSEG-ZUONR with sales Order no( traverse back to the Original SO during reversal) ( Basically Assignment field (ZUONR) in the Accounting side) after performing the Post Goods issue USING TRANSACTION VL02N.
Is there any user exit which can allow us to update the accounting field ( ZUONR) during the post goods issue ( Tcode VL02N)?
Thanks a lot.

Hi,
you can achieve this using the concept of validation and substitution rules in FI (Check transaction OB28) or below help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/27/06e23954d9035de10000000a114084/content.htm
Hope this helps
Regards
Shiva

Account determination Error during material posting

hi
when i try to post the stock through MB1C, it shows an error that Account determination for omb1 (company Code)GBP_BSA not possible.
please help me out and where i exactly i missed the configuaration
thanks

Hi Friend,
Goto Transaction code OMS2 and click on the Qantity update for your plant and material combination.
This will help
regards,
santosh

Changing useful life of assets during asset to asset transfer

Hi All,
We need to transfer some assets to new assets changing its useful life. Below is my scenario.
Old Asset "A" has an useful life of 5 years and depreciation start date is 01.01.2006. Where this asset would be fully depreciated by the end of year 2011. The depreciation runs have been completed for November 2009.
Before using transaction ABUMN, I created a new asset "B" in a different asset class with the exact details of the old asset ONLY changing the useful life to 3 Years. (even the dep start date is 01.01.2006 - same as the old asset)
In Tcode ABUMN, I entered the old asset, doc date as 30.11.2009, posting date as 30.11.2009 and asset value date as 30.11.2009. Transfer variant 4 is been used in this case. The transaction went through successfully. The main idea behind this process was to depreciate the entire new asset "B" by the end of 2009, which should be the case as if 01.01.2006 is the dep start date with useful life of 3 years.
But this is not happenning. The entire depreciation is not been shown under plannned values for DEC 2009. Only a small value is shown. I need this asset to be fully depreciated by 31.12.2009 in variably absorbing the enire balance depreciation for the month of Dec 2009.
Please help me resolve this asap or please suggest me a different way of doing this if I am not doing it the right way.
Thanks & Regards,
Maleeq

Hi Kishore,
I need to change the asset class as well and thats why I need to to do the asset to asset transfer.
Thanks,
Maleeq

Is it possible to change the asset value after depreciation posted for 4 months

Hi
Is it possible to change the asset value from 50000 to 60000 after posting the depreciation for 4 months.
If it is possible kindly share the process..
Thanks
Srikanth KVS

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

Issue while doing material posting through Usage Decision

Hi all,
I have an issue while doing material posting through Usage Decision. Please find below the details.
Inspection Lot 10000604689
Material        1730PCPBS.0031
Batch           QP611097      GQ02
Out of total qty of 2100 we need to post the following
To unrestricted use                     2,098
To sample usage                         2
Following error appears,
Deficit of SL Stck.in qual.insp 1,638 NO : 1730PCPBS.0031 62GQ GQ02 QP611097
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1,638 NO.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
I have checked that quantity 2100 of material 1730PCPBS.0031 is in QI stock. Kindly advice what is the issue and why we are getting the error?
Regards,
Brijesh

Hi Brijesh,
What is the status of inspection lot?
One of the possibilities I think could be inconsistencies between MM and QM.
Have a look on SAP note 48815- Checking possible inconsistencies between MM and QM.
Regards,
Anand Rao

Asset Unplanned Depreciation posting for period 12 where ord dep is posted

Dear Experts,
I have a requirement where i want to post Unplanned/Manual depreciation for asset for period 12 where i have already posted ordinary depreciation and now when i am trying to change the post key i am getting a message "Enter a depreciation key with 'depreciation by days'
Is their any possibility where i can post some depreciation amount manually or through unplanned depreciation for period 12 without disturbing Planned depreciation amount.
Regards,
Rahul

No,
a depreciation key with 'depreciation by days' you can only change in a depreciation key with 'depreciation by days'
This is set-up in the depreciation key
This is the help:
Depreciation calculation to exact day
Specifies that the system calculates depreciation to the day.
Use
Any period control methods entered in the depreciation key are ignored for the entire useful life of the asset. This applies to all transactions (acquisitions, retirements, and transfers). The system always uses the asset value date as the depreciation start date.
The "depreciation to the day" function becomes active for an asset as soon as the asset has a corresponding depreciation key and the asset is capitalized (posted to). Once this takes place, it is no longer possible to switch off this function for the asset, even if you change the depreciation key. On the other hand, it is not possible to activate this function for an asset after it has already been capitalized using a different depreciation key.

Exchange Rate difference posting during MIRO posting

Hi ,
We are facing an issue for exchange rate difference posting during MIRO.
PO creation , GR posting & IR posting done on same date. Vendor in PO has different currency than company code currency. Exchange rate maintained in OB08 for this period is taken in PO.
PO value & GR value is same. Due to raw material cost there was price difference posted during GR posting.
(i.e. Raw material cost - GR/IR value = Price difference amount)
During posting MIGO, 3 accounts got posted.
Raw material cost account got debited & offset credit to GR/IR account & price difference account (in vendor & company code currency also)
During posting MIRO, 4 accounts got posted.
Vendor account got credited with GR/IR amount & offset to GR/IR account debit.
Exchange rate difference account got credited & offset to price difference account (in company code currency only)
Since PO creation , GR posting & IR posting done on same date, then why system has posted exchange rate difference account in local currency only during MIRO posting ?
Your inputs appreciated.
Thanks & Regards

Hi,
there is a setting in configuration of logistics invoice verification where you can control the calculation and posting of exchange rate differences. If you had the setting active that exchange rate differences are calculated against a planned exchange rate, that might lead to the kind of postings you describe. Please check.
best regards, Udo

PPCO0007 User Exit for Changing Header Fields During Order (CO40)

.. Hi !!!!
I need your help or suggestions,
I need to change the standar order before to save, i found the user exit PPCO0007,
i assign the new value for the order, but when finish the fuction, EXIT_SAPLCOZV_001, the new values are
lost, and finally the system set the standard order.
Someona know how can change the order and the the batch.
Thanks
Noemí Huerta

Hi Noemi
You can use the enchancement PPCO0007 (exit when the production order is saved).
Use the function module EXIT_SAPLCOZV_001 (User Exit for Checking or Changing Header Fields During Order Save) to update the field priority starting the information in the material-customer info record.

Change Moving Average Price when Post Goods issue posted from VL02N

Hi all,
Please help me to find USER EXIT / BADI or Enhancement to change Price - MSEG-DMBTR
when Post Goods Issue posted from transaction VL02N.
Thanks in advance,
Mila.

Hi,
Check these Enhancemnts...
Exit Name           Description
V02V0001            Sales area determination for stock transport order
V02V0002            User exit for storage location determination
V02V0003            User exit for gate + matl staging area determination (headr)
V02V0004            User Exit for Staging Area Determination (Item)
V50PSTAT            Delivery: Item Status Calculation
V50Q0001            Delivery Monitor: User Exits for Filling Display Fields
V50R0001            Collective processing for delivery creation
V50R0002            Collective processing for delivery creation
V50R0004            Calculation of Stock for POs for Shipping Due Date List
V50S0001            User Exits for Delivery Processing
V53C0001            Rough workload calculation in time per item
V53C0002            W&S: RWE enhancement - shipping material type/time slot
V53W0001            User exits for creating picking waves
VMDE0001            Shipping Interface: Error Handling - Inbound IDoc
VMDE0002            Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0003            Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0004            Shipping Interface: Message SDPACK (Packing, Inbound)
Badi Name            Description
DELIVERY_ADDR_SAP    Determine Time-Dependent Delivery Address in Delivery
DELIVERY_PUBLISH     Returns BAdI Implementation: Automatic GR Posting T 2
DELIVERY_PUBLISH     Updating of Delivery in Purchase Order
DELIVERY_PUBLISH     AIP: Delivery Confirmation for Sales Order
Regards
Raghu

MR21 price change for S price material

Hi all,
We are facing an unique problem.
Earlier on 05May, price was updated for a S price material from A to B thru MR21 having posting date 01May. Price change document and its accounting document has got generated successful. On checking the price on 25May, price is A i.e. Old price. I listed the price change documents for the material, I was not able to find the any document after the above said date. So far the movements has happened in old price.
Further I checked in MBEW, price is A i.e.Old price. In table MBEWH for the april period, price is B.
New price has got updated nowhere apart from MBEWH and price change document.
Anyone can advice, how this has happened. What is the reason
Regards
Suddy

you are working with a fiscal year variant, as your fiiscal year does not match with the calendar year.
In general the month of the posting date is equal with the period, however, using a fiscal year variant the posting date is checked against a customizing table to determine to which period the posting has to be made.
Those variants are defined in OB29
and they are assigned to company code in OB37.
so check OB37 first to find which variant is assigned to your company, then use OB29 to see the definition of the variant.
Maybe the first day of the new month is defined to fall into the old period.

How to reverse the Batch number which was enter wrongly during GRN posting

Hi Folk,
How to reverse the Batch number which was enter wrongly during GRN posting .
Please revert.
Thank you.

You can either do a transfer posting and move quantity from this batch to another batch e.g. in MB1B with movement 311, or you cancel the entire material document using MBST transaction and redo your receipt correctly.
Then you can flag the wrong batch for deletion in MSC2N.
The batch itself gets deleted physically with the archiving transaction SARA object MM_SPSTOCK

Asset as material

Hi All,
I am not sure if this question should be posted to FI. the scenario is, Customer has a land maintained as asset for company. they create plot out of them and sell them. They want to maintain the inventory of plot, create them as material so that in SD, all pricing and availability check etc can be maintained for the same. Is there any way of converting this asset into material (for ex initial 100 acres of land as asset then out of them they convert 10 plots of 10 acres , giving product code to each plot ) ?
The issue is to reduce the asset value and create the material inventory out of them.
Please suggest if there is any other way to map this in SAP MM or FI.
thanks,
Binita

Hi,
Yes, you can treat that as an asset,
Basically the procedure is as follows,
We can create as an asset till the plot is under construction, finance can treat that as an asset under construction. Once the plot is constructed then you can assign the asset number. After that you can do asset retire so that asset is no more.
Then you can sell that product based on plot value.
But however i can see one issue that asset depreciation and how to capure the correct asset value.
As per the standard asset properties FI will be doing asset depreciation but where as in your case plot value increases.
Check with finace when you go for a solution.
Thanks,
Satya.

How to address missing parts during material availability check

The system prompts that a particular component is missing during material availability check of a production order. Said component is available in the system upon verification in MMBE.
We noted that the goods receipt date of the material is way beyond the requirement date, hence the system still prompts that it is missing.
What we did to correct this is to change the basic start date of the production order thus changing the requirement date of the material.
The resolution unfortunately, brought another problem, another planned order was generated, which consequently generated another purchase requisition.
What is the proper way of addressing the missing parts prompt during material availability check?

Hi
Not able to understand why you are using BAPI & function module.
It is a simple function of avaialbility check.
For this you have to fill the availability chk field in material amster of all components & givecheckinh rule inOPPQ .
After creation of process order, you can check COR2 it self.
It is a std functionality.
It should definitely work.
Regards
YMREDDY

Change profit centre in material master

Dear all,
How to change profit centre in material master with stock(opening balance - 561 stock ?
What are implications of changing profit centre in material master ?
Jeyakanthan

In standard SAP it is possible to change the profit center at any time.
However this will create inconsistencies in your profit center accounting. Hence you should issue all stock first to a cost center with 201 movement, then change the profit center, then get the material back with 202 movement.
You need to make MM335 message an error message in OMT4 to allow a change only if there is no stock
If you dont follow this way, then you create inconsistencies in profit center accounting.
Because...you received your stock without profit center (actually it is a certain default profit center), if you then change the PC in your material, then each issue will be posted to the new PC, while it never had a receipt.

Changing an asset during material post.

Similar Messages

Maybe you are looking for