Changing BEx Query in EDIT mode in production environment

Hello,
In our BI Production system, the BEx queries can not be opened in edit mode.
I have to change the query in production.But the same qury in developement is quite different.
So instead of changing the query in dev and transporting it to quality and prd, i want to directly edit the query in PRD.
Is there any way i can change the query in production directly?
If so, what are the steps to be followed?
Also, can we copy the query in Prd environment into developement environment?
Edited by: shreyasketkar on Jun 1, 2011 4:42 PM

Hi ,
please visit this link your answer is might there,
[want to transport object from production to dev server]
Transporting from Production to Development is definitely not "Best Practice". For exceptions this is OK, but I can't recommend to do this on a regular basis. Because in the end you will turn your production system into a development box and create potential circular references:
DEV -> QA -> PROD -> DEV
for details about transport system please see
[http://help.sap.com/saphelp_bw30b/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm]
Regards
satish singh
Edited by: satishsmse on Jun 2, 2011 4:15 PM

Similar Messages

Cannot change vi back to edit mode.

Hello,
I saved a vi so that when it was opened it would come up in run mode using "vi properties", "protection", "locked" but when I open the vi it will not let change it back to edit mode (ctrl-m is grayed out). Any assistance would be appreciated. THANKYOU!
Alma

momof4 wrote:
Sorry not sure how to attach the file. Using LabVIEW 2009 and it has several sub vi's.
We don't care about the subVIs. Just attach the one giving you problems. There is a button to attach files below the field where you compose a reply.
LabVIEW Champion . Do more with less code and in less time .

Changing BEx query - Lock against External Changes

I have BEx query in DEV system.
It was transported to QA system.
Now some changes were made in Cube, Like adding infoobjects.
These infoobjects are to be available in BEX query.
But when the query is opened the following message is getting display
Lock Against External Changes...
BEx transport request 'DV1E756532' is not available or not suitable
After checking details of message
Diagnosis
There are the following possible causes:
No request has been set up as the standard transport request for BEx objects.
The (set up) request 'WD1K917646' (for the package '' ) has already been released.
The (set up) request 'WD1K917646' (for the package '' ) is not of the type 'transportable change request'.
System Response
The request WD1K917646 can not be used to record changes to BEx objects (queries or Excel workbooks). The changes made to objects you are editing will not be logged.
Procedure
If you want to record changes to BEx objects, set up an open transportable change request as the transport request for BEx objects. (If the package '' is not empty, set up a request for this package).
Inform your system administrator of your actions, or enter a new, targeted transport request in the Administrator Workbench in the transport connection by using the 'BEx' pushbutton (Create Transport Requests for BEx).
Procedure for System Administration
How to make changes to query.
Step by Step help needed.

Hi,
I'm also receiving similar error 'BEx transport request is not available or not suitable' when I open a query in development SYSDEV to edit.
This query has been transported to SYSQA but now I need to make some changes so I opened it in SYSDEV but it doesnt allow me to edit.
Do I need to follow the below steps to be able to edit the query in SYSDEV and once done I need to transport the changes/query to QA for validation.
In SYSDEV or SYSQA ?
Step 1) Go to RSA1 Tcode.
Step 2) Click on "Transport Connection" function on the left side pane.
Step 3) Make sure that Grouping is "Only Necessary Objects".
Step 4) Make sure that Collection mode is "Collect Automatically".
Step 5) Collect your query by double clicking on "Selected Objects" which is under "Query Elements"->"Query"->"Selected Objects".
Step 6) On the Right side pane, take a Right Click on the "Query Elements" node and choose "Transport all below".
Note: Make sure that you have not selected any other object other than the objects which are under "Query Elements".
Step 7) Click on the "Transport Objects" ( Truck Icon ) button. Is it Transport Bex button here ?
Step 8) Create a new "Transport Request".
Also below are the steps I used to transport from SYSDEV to SYSQA initially.
Step 1) Go to RSA1 Tcode.
Step 2) Click on "Transport Connection" function on the left side pane.
Step 3) Make sure that Grouping is "Only Necessary Objects".
Step 4) Make sure that Collection mode is "Collect Automatically".
Step 5) Collect your query by double clicking on "Selected Objects" which is under "Query Elements"->"Query"->"Selected Objects".
Step 6) On the Right side pane, take a Right Click on the "Query Elements" node and choose "Transport all below".
Note: Make sure that you have not selected any other object other than the objects which are under "Query Elements".
Step 7) Click on the "Transport Objects" ( Truck Icon ) button.
Step 8) Create a new "Transport Request".
Please advice
Thank you.

OB57 change mode in Production environment

Hi all,
Till now we are modifying the table T_043 which is related to user tolerance group in our Production system. Now we are plannig to keep OB57 in change mode(in Production).
We have tried to change the same in development with SPRO settings steps are as follow:
SPRO>>>Select the Tcode>>>Edit>>>Display IMG>>>Maintain tab>>>Change mode>>>Select the module>>>Change>>>>No transport + adjustable in dialog>>>save .....
But here i am unable to save the changes, i have taken the object key and tried the same with developer id.
And now the requirement is , there any way to change the same through Transport request or direct changes in Production client(CLIENT OPEN).
Regards
Nick Loy

Thanks Subha,
Issue was resolved. According to my resesarch i found some information as mentioned below for your knowledge:
SAP will not allow us to make changes to a standard view or table. Here T_T043 is the standard table and V_T043 is the standard view which is mapped with that table. We are unable to change these standard settings. Here i have created a new view with copy of original and mapped the same with standard table. In this new view i have changed the standard settings. Then transported to Quality and Production. Now it is working. For security reason i have created a new Tcode for the new view.
But when we are going to import the same, need to open client till import complete.
Now we are able to change directly in production with new Tcode and view, this is reflecting of same database table. This is the time & Resource consuming method.
Regards
Nick Loy

Changing background color in Edit mode?

Is there any way to change the background color in Edit mode. My background is white, very annoying.
Also full screen mode is Black. Also annoying, wish it was dark grey.
Thanks,
Ed

no
suggest to Apple - iPhoto menu ==> provide iPhoto feedback

My mac updated, now top site page has changed and is in edit mode constantly-help?

When I restarted my mac after a scheduled update, the top site page still had all my saved sites on it but it was much bigger and the style and background have all changed. It also appears to be in edit mode and I can't see an edit button (like usual) to switch the mode off. The little cross and pin button is on each of the site icons and won't go away...Not techy enough to know how to fix this Would appreciate any help!

Forgot Your Account Password
For Lion/Mountain Lion
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see Reset a Mac OS X 10.7 Lion Password, OS X Mountain Lion- Reset a login password, and
     OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself

Transportation Process-Changed BEx Query

Hi Experts,
I am in the process of changing one query.After the changes are over,whats the process of transportation?I read and understood the following concept from help.sap.com
.First we will go to transport connection-collect the objects into collection area-click on Truck symbol-Give Package name-Give Request name-Go to CTO-Release the request.
My doubts are:
1.After collecting the changed query,I will click on TRUCK symbol.It will prompt me for Package name.Do I create package by myself and give that name or is this package given by Project people?
2.After giving package name,we have to give request name.Who gives this request name?or do I need to create it by my own?
3.After giving request name,I need to go to CTO and release....who does this releasing?Me or someone else?
4.How does this process works after the REQUEST is released in CTO?
5.After this query is tested in QUAL,If its OK and we have decided to transport it to PROD,do we need to do the whole process of transportation(collect-package name-request name-CTO-release request) or how do we do it?
6.Do we need to give new package name and new request name when transporting from QUAL to PROD?
Thanks and Regards,
P Olin.

Hi,
Please find below the answers for the same:
1.After collecting the changed query,I will click on TRUCK symbol.It will prompt me for Package name.Do I create package by myself and give that name or is this package given by Project people?
You can ask your Basis Team for the packahe name.
2.After giving package name,we have to give request name.Who gives this request name?or do I need to create it by my own?
You can create your one transport by clicking on the create Icon in the Pop up.
3.After giving request name,I need to go to CTO and release....who does this releasing?Me or someone else?
You can do this if you have access else it will be basis team again.
4.How does this process works after the REQUEST is released in CTO?
The objects are imported in the next landscape.
5.After this query is tested in QUAL,If its OK and we have decided to transport it to PROD,do we need to do the whole process of transportation(collect-package name-request name-CTO-release request) or how do we do it?
Just import the same TR in Prod system using CTS.
6.Do we need to give new package name and new request name when transporting from QUAL to PROD?
The same TR will be used.
-Vikram

BEx Query to be transported from Production to Development

Hi All,
We have got an unusual scenario in which we have to import/transport few Bex queries from Production to Development environment. I understand this is not a best practice, but any one suggest the way to implement the same.
Thanks,
Jay

Hi Jay,
For every transport which moves a transport route is configured in transaction STMS (Transport Management System). Ideally it is Dev --> Qal --> Prod. Usually we do not have access to this transaction as Basis Team Configures this route. Check once in transaction STMS (if you have access) that whether the route Prod --> Dev is configured or not (i doubt it would be).
In that case you can raise a request to Basis to configure this route for this exceptional case, if they agree then Transports can be moved via this new configured route.
Regards
Raj

Can't save any changes made in EDIt mode?

HI all
I am new to apple products ... but I am now playing with iPhoto 11. I am able to import my photos from my camera with no problems. And then, in EDIT mode, under "adjust" I am able to make a lot of nice changes - De-noise, sharpness, etc.. - but I don't have a button to allow me to save? I have looked at the user guides on line and they talk of a DONE button - but I don't have one? And when I go back to the photo library and look at the photos there, the changes I have made are not shown. But if I click on each photo individualy and click on EDIT again - the changes I made are saved? But I can only see my changes whilst in the EDIT mode per photo?
How do I save my edits back to the photo library? I want to uploaded the photos with the changes I made - but everytime I try an upload -- even a single photo - I get the original photo before my edits
Any help would be appreciated please
Thanks
Chris

Your database is a bit mucked up (<- Technical term, that)
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

How to bring the Tcode FI12 in Production System in EDITABLE mode

Dear Sir/Madam,
The T code - FI12 is not in editable mode in Production System. Is it by default remains in NON Editable mode ? Our FI consultant is saying that the users needed it in Editable mode for maintaining BSR Code.
To bring it to Editable Mode, I have to open the Production Client. Is there any alternate exists to bring this Tcode ( FI12 ) in Edtable mode other than Opening the Client ?
Thanks and Regards,
Pranab

Users needed in editable mode
Is this a one time activity or a permanent?
You can transport the changes from DEV to PRO without opeing a client.
OR
You can create a cusomize tcode with same functionality with secondary index to use the same entities in editable mode.
Just work with your ABAPer and get it done.
Regards,
Nick Loy

Change from edit mode to display mode

Hi ppl
In transaction CO11N , I want to change the quantity (COWB-ERFME) column of a table control
from edit mode to display mode. I created a badi implementation for WORKORDER_GOODSMVT.
This gets triggered before the screen with quantity (COWB-ERFME) is displayed. How to code, to change the column from edit mode to display mode.
I tried using transaction variant and it is working , but I want it to be plant specific. So I m trying badi.
Need ur help to go abt the coding

Hi
U make sure a method of the BADI WORKORDER_GOODSMV is called in PBO while looping table control, if it's so u can use the statament LOOP AT SCREEN.ENDLOOP:
LOOP AT SCREEN.
IF SCREEN-NAME = ....
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Max

Error while trying to Open and Delete a BEx Query in Query Designer.

Hi Experts,
I have been facing this issue with BEx Query in Designer mode for a couple of days now in Development Environment in BI 7.0.
I would like to Delete an unwanted BEx Query because I need to give it's name to another BEx Query.
Whenever I try to Open this Query in BEx Query Designer to Delete, it gives out an error saying:
"An error occurred while communicating with the BI server.
As a result of this error, the system has been
disconnected from the BI server.
Detailed Description:
STOP: Program error is class SAPMSSY1 method : UNCAUGHT_EXCEPTION
STOP: System eror in program CL_RSR and form GET_CHANMID-01 - (see long text)"
Details text is as below:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
I have tried with SAP Note 899572, but still it's the same.
Has anyone faced similar issue? Could you please let me know if you have better ideas or solution?
Your time is much appreciated.
Thanks,
Chandu

Arun - Thanks a million. You saved me Nine. It worked.
Could you also please tell me how to rename (Technical) a Query or is it still "Save the Query As" the only way...?
Points already assigned.
Thanks,
Chandu

Universe on BEX query - Measures Question !!

Hello All,
I am building a Universe on BEx Query.
We have the following environment:
SAP BOE XI 3.1 SP2 FIX Pack 2.5
Integration KIT SP2 FIX PACK 2.5
SAP BW 701 Level 6
I see that in the BEX query the KF have technical names as "ZZRKF_Amount".
But, when this query is brought into Universe, I see the tech names as
[[4J922TWKO24NHTROOEY3WXK72]].[[4J922URARWJHKBXHBR7H15F26]]
I would like to see this as [[MEASURE]].[[ZZRKF_Amount]].
Does anyone know how to do it?
Your help & time is appreciated.
Thanks

Hi,
In the Universe Designer, select Tools ->options. In the OLAP tab, there is option to select as generate technical names as details.
I guess this may help you.
If still facing the same issue, then follow the user guide from the below link:
http://help.sap.com/
-Noor.

Precautions to be taken while changing the Query read mode in PED system

Dear Experts,
I got a task to change the Query Read mode for more No. of queries in Production system directly itself.
Request you to let me what are the steps to be followed/precautions to be taken while changing the Query Read mode in PED.
one more doubt regarding this.....If i plan to change the Read mode of Query say Q1, how can i come to know weather the Q1 is executing or not executing by that time.
Thanks in advance for valuable response.
Thanks & Regards,
Ramesh - Kumar

Hello,
You can change the query read mode in transaction 'RSRT', here are the steps:
1) Access transaction RSRT and enter the query name
2) Select the 'Properties' option
3) Un-check the 'Info provider' setting next to the 'Read mode' --> This enables you to change the read mode of the query --> Execute
4) Choose the option 'Generate Report' to re-generate the query program
Hope this info helps.
Thanks
Bala

How to edit the properties for existing variables in BEX query, so that I can get multiple input selections

Dear fellow developers,
I'm trying to edit an existing variable using BEX query, so that it can allow multiple input selections.
As you can see in the screenshot attached, the option is selectable during creation.
However, during editing of an existing field, this field (Details -> Basic Settings -> Variable Represents) is not selectable.
Does anyone knows why, and how to remedy this?

Yes you can do it at the table level.
Go to SE11 enter table name as RSZGLOBV.
Enter the technical name of variable in VNAM field..You need to change the value in VPARSEL column.
Please make sure to get the where used list of this variable so that you can know the impact,if something goes wrong.
Also change it in DEV and then transport across the landscape.
PS:Same thing has been described in this blog as well
Changing BI variable parameters
Regards,
AL
Message was edited by: Anshu Lilhori

Changing BEx Query in EDIT mode in production environment

Similar Messages

Maybe you are looking for