Changing Broadcaster settings

Hello everybody,
I would like to know if there is any way of changing the owner of a broadcaster setting. I am the presently the owner of the settings and would like to transfer it to someone else (the client would like to keep the same technical name of the broadcaster settings). Is there any way of doing this? Any tricks?
I tried by opening RSRD_SETTING table via SM30, but SAP will not let me change its values...
Thankyou

I not sure either there is possibility to do it.
I would suggest to create the same settings with different user in TA RSRD_ADMIN.

Similar Messages

Information Broadcasting Settings (Dynamic Change or User Exit)

Hi,
We are working on BI7 and we have a need to print a cost centre specific report on different cost centre specific printers.
This relationship of user to cost center to printer is stored in a custom table(Ztable) as given below:
User Id         Cost Center              Printer
Abc               2000                        XYZ
It is easy to setup a setting in the Information Broadcasting and use it for printing. But problem is coming from the fact that it is a static setting and a new setting is required for each record of above custom table (Ztable).
Also, if there is any change in custom table entry, which is linked with R3 source system then we need to do manual changes in the Information Broadcasting settings. There are more than 520 printer records in this Ztable.
It could be better, if there was some way to use a single information broadcasting setting and use it with different parameters but I could not find any such option.
Other possibility is to create the settings by a background job but I did not see any such possibility as well.
Is there any user exit that can be used to manipulate Information Broadcasting settings in background?
Thank you very much for your help!
Praveen

hi praveen,
One of the important enhanceents in BI7 broadcasting was to "individualize the content based on master data"......
   for example....If the last field in your master data record was an email address...
                        you can create a report,   filter by the UserID (1'st field) and email it...
   I didn't send it to a printer....but I am guessing it should not be much different than emailing...
Good luck, BB

Broadcasting Settings: Workbook Precalc. Variable Sequence

Dear all,
does anybody know how it is possible to change the sequence of the variables for the pre-calculation in the Broadcaster settings for distributing a Workbook with different Queries?
Thanks a lot
Dieter

the sequence can be determined in the query level.
but if multiple query user in workbook or web template, there is a logic defined in a note 1060735.
regarding workbook Note 1416277 is describing a error correction.

Information Broadcasting settings Problem.

Hi All,
When we are trying to change the Information Broadcasting settings for some queries. We are not able to edit the existing settings as the message pops up saying system is not ready for change and asking us for the modifiable system. Is it possible to change the information broadcasting settings with out making the system modifiable?.
Regards,
Aditya.

In which system you are trying to do this?
I understand in DEV system, there should not be any problem of doing the system modifiable and then do the Broadcasting setting and then transport it to Qly and Prod.
However Qly and Prod system are not supposed to be modifiable.
Regards
Pankaj

Changed Security settings, now cannot connect

Hi,
I was trying to increase my security settings on my WRT54G v. 8 and somehow have messed up my connection. I updated the MAC settings so that only my computer has access, and I tried to change my WEP from 64 to 128 bit. I now realize I should just change it to WPA, since it is much more secure. Now my wireless is not working, saying limited or no connectivity because it couldn't assign a network address, I believe (It looks like I don't have an IP address??). When I use my wired internet and type in the default wireless IP address, it says that the connection is not valid or some such thing (sorry, I am not on my home computer now) and I cannot get in to change the settings again. Do I need to reset the router and reset all my settings? How can I reconcile new security settings with my computer? Thanks!

To set up wireless security, you must use a computer that is wired to the router.
Where to find the router settings: The router's login password is usually on one of the "Administration" pages. The other settings are all found in the "Wireless" or the "Security" section of the router's setup pages, located at 192.168.1.1
First, give your router a unique SSID. Don't use "linksys".
Make sure "SSID Broadcast" is set to "enabled".
Next, leave the router at its default wireless settings (except for the unique SSID), and then use your pc to connect wirelessly to the router. Test your wireless Internet connection and make sure it is working correctly. You must have a properly working wireless connection before setting up wireless security.
To implement wireless security, you need to do one step at a time, then verify that you can still connect your wireless computer to the router.
Next, encrypt your wireless system using the highest level of encryption that all of your wireless devices will support. Common encryption methods are:
WEP - poor (see note below)
WPA (sometimes called PSK, or WPA with TKIP) - good
WPA2 (sometimes called PSK2, or WPA with AES) - best
WPA and WPA2 sometimes come in versions of "personal" and "enterprise". Most home users should use "personal". Also, if you have a choice between AES and TKIP, and your wireless equipment is capable of both, choose AES. With any encryption method, you will need to supply a key (sometimes called a "password" ).
The wireless devices (computers, printers, etc.) that you have will need to be set up with the SSID, encryption method, and key that matches what you entered in the router.
Retest your system and verify that your wireless Internet connection is still working correctly.
If you have trouble connecting, in the computer, go to your wireless software, and go to "Preferred Networks" (sometimes called "Profiles" ). There are probably a few networks listed. Delete any network named "linksys". Also delete any network that you do not recognize, or that you no longer use. Delete your current network (this will remove any old settings). Reboot computer. Return to "Preferred Networks" and re-enter your current network info (SSID, encryption (if any), and key (if any) ). Then select your current network and make it your default network, and set it to automatic login. You may need to go to "settings" to do this, or you may need to right click on your network and select "Properties" or "settings". Reboot computer. You should reconnect automatically (it can take up to two minutes). If you still have trouble, temporarily turn off your computer software firewall.
And don't forget to give your router a new login password.
Picking Passwords (keys): You should never use a dictionary word as a password. If you use a dictionary word as a password, even WPA2 can be cracked in a few minutes. When you pick your login password and encryption key (or password or passphrase) you should use a random combination of capital letters, small letters, and numbers, but no spaces. A login password, should be 12 characters or more. WPA and WPA2 passwords should be at least 24 characters. Note: Your key, password, or passphrase must not have any spaces in it.
Most home users should have their routers set so that "remote management" of the router is disabled. If you must have this option enabled, then your login password must be increased to a minumum of 24 random characters.
One additional issue is that Windows XP requires a patch to run WPA2. The patch is located in SP3, so you will need SP3 to run WPA2 in Win XP. Vista already supports WPA2.
Note:
WEP is no longer recommended. The FBI has demonstrated that WEP can be cracked in just a few minutes using software tools that are readily available over the Internet. Even a long random character password will not protect you with WEP. You should be using WPA or preferably WPA2 encryption.
Message Edited by toomanydonuts on 01-27-2010 04:53 AM

Broadcast Settings

Hi
I have a process chain that kicks off a "Trigger Event Data Change" for an infoprovider, I have several broadcast settings for a web template which uses a query based on this infoprovider. When I first ran it, all the settings executed perfectly, about 2 days later some executed while others fell over with an error, the problem is everytime I run it some of the settings work while others fail but never the same ones fail, but there is always a failiure, the error message I get back is,
*Error: java.lang.NullPointerException*
I get this for each setting that fails.
The BEX Query is fine and when run on its own runs fine, the same with the WAD. The error only happens with the broadcast setting.
Anyone ever have the same problem? Thanks for the help.
Regards
Lyndon

It looks like there is something wrong with the java engine... maybe it's a time out, maybe it's something else...
let a systemguy have a look at it... (logs...)
Joke

Help in Finding BEx Broadcasting Settings

We recently refreshed our Sandbox environment with a copy of our Dev environment. We use Information Broadcasting. When someone opens a Workbook in BEx in our Sandbox environment and clicks "Distribute Workbook", they are prompted with the Broadcaster logon screen for our Dev environment and not Sandbox. This makes sense, since we copied our Dev environment. How do we change the settings so that the Broadcaster connects to Sandbox? Thanks.

Hi,
You need to make changes in SPRO to maintain Broadcasting Settings .
Regards,
Sasi.

I wrongly changed my settings to the American store and now when I try to download updates for the apps my ipad 2 tells me I need to switch back to the Canadian store, how do I do that. Resident of Canada

I wrongly changed the settings on the apps page to the American store. Now I cannot download any updates because I am locked out and need to revert back to the Canadian store, how do I do that

Try going to the bottom of the Featured tab in the App Store app on your iPad and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Canada.

My iPhone safair says it cannot open because it is not connected to the internet. What do I do? I do not believe I changed any settings. I have turned the phone off but this did not work.

Safari cannot open because the iPhone is not connected to internet. I do not believe I have changed any settings. I have turned off the phone and then on, but this did not work. Help?

For Safari to work, you need either Wi-Fi or cellular data.
Are you connected to a Wi-Fi hotspot?
If not is Settings > Mobile/Cellular > Mobile/Cellular Data: ON

How do I get rid of the dropdown list history on the location bar? I have tried changing several settings and all I have done is mess up my ability to open ZIP downloads.

I wanted to clear the drop down suggestions/history list on the location bar so I went to Tools/Options and tried changing several settings. I could not get the results I wanted. Suggestions?
I did get one unwanted result -- or maybe just a coincidence. I received an email with attached pictures in a ZIP format and I could not get the download to open. Suggestions?

Tools > Options > Privacy > Location Bar: When using the location bar, suggest: Nothing
See [[Smart Location Bar]]

When Updating to IOS4 Do Not Say Yes to Udpate Changes to Settings

I updated my iPhone 3g to IOS4 on release date. OK You can stop laughing at me know, I got screwed over but I was lucky.
I couldn't get the OS to install using the update so I did the work around and downloaded the OS into iTunes and did a backup and then a restore. I had read a couple of threads that said this would work a lot faster than doing the update. I had waited nearly three hours for the update to finish so I figured it was the combination of my creaky old PC, iTunes and one of the apps on my phone so I tried the restore instead of update trick. It actually worked and only took about 30 minutes start to finish.
BUT when it was done I got a dialog box telling me that I had changed my settings and did I want to apply this change to my phone <YES> or <NO>? Without thinking about it I clicked yes and my phone did another sync. I lost my address book, email and text messages all in one fell swoop. Can you spell panic and nausea? I thought you could.
I was all over the web looking for ways to restore my stuff. I tried another sync because the last one I did before installing the new OS should have still been there...No Luck.
I tried everything I could think of and nothing worked. I wasn't too worried about my email, because of course it was still out on the web (Gmail Rocks!!)
Then it occurred to me, I had been using Gmail and GSync. I set up a new G-Sync account on my phone and set it to running. It took about 24 hours total, but all of my email, contacts and text messages restored themselves to my phone wirelessly.
So I strongly recommend that you do not apply changes to your phone when you do the IOS4 update. At least not the first time around. I also do not recommend using the restore in place of update workaround. Just let the update run (and run and run and run and, well you get it)until it finishes. You should get a clean install and a total restore of your music, contacts, apps, email, etc. I have no idea why an update on an 8 Gb iPhone needs to take hours, but apparently it just does.
So to sum up:
If updating to IOS4 use the update in iTunes not restore
At the end of the update DO NOT apply changes to settings
DO use gmail and G-Sync or another email that backs up your address book to the web.

Fixed it......
The problem was my Apps library in iTunes was not populated with the apps on my phone after the update of iTunes and iOS4. Therefore, that is why I "lost" them visually. Now, had I gone and hit "Apply" I would have been screwed, since nothing was in my iTunes App library.....Sneaky.....
In iTunes, File>"Transfer Purchases from iPhone"
This populates the iTunes App library with the apps on your device. It will take a few minutes, but all of the apps will now show up when you go back and try to sync the iPhone.
Screenshot of Success!
http://i55.photobucket.com/albums/g134/leonardrock/Screenshot3.png
Nice, I'm not stupid.
Thanks for the chime-ins everybody!

HT1688 Someone changed the settings on my iPhone so that I can no longer update my apps or download new apps. I don't have the icon on my phone anymore. Can someone please tell me how to get it back?

Someone changed the settings on my iPhone so that I can no longer update or add apps. The icon no longer appears. Can someone please tell me how to add that back?

I should have added that the iTunes app is not displayed on my phone in order for me to add the apps.

I have an Iphone 4s from my work. Until 2 days ago, my iphone would notify me when I got an email or text. Now it does not notify me at all and some times it does not ring at all either. I have not changed any settings at all.

My iphone just randomly stopped notifying me when I got an email, text or voicemail. Sometimes it will not even ring. I confirmed that the volume is turned on and I have not changed any settings at all. My software is up to date. In my job I need to know when I get an email without having to constantly activate the screen or open the email icon.
Does anyone have any suggestions to fix this problem?

First, is the Mute switch activated?
Mute switch is above the volume buttons on the left side of iPhone.
If you see red/orange color the the mute is ON.
Also check Settings > Sounds > for New mail, Text Tone, etc.. have sound entries?
If that's not the case try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

I can not longer send email from my .me email. in outlook 2010 on my PC. I can still recieve emails fine. I have not changed my settings at all. I have however tried all the settings i can find on the support pages. PLEASE HELP

I can still receive icloud ( ME email address) emails fine. I have not changed my settings at all. I have however tried all the settings I can find on the support pages. PLEASE HELP. Nothing has changed. This suddenly just started happening around a month ago. To frustrate me apple does not seem to have a support email or any method to contact them with this issue to do with their email product. I have spent ages going through the apple support sites and I keep getting asked for an apple product to mark it against. I have no apple product as I am using a PC but I am accessing and using their email product. Is there even a phone number I can call? Surely there is a support area for their Email server issues. Can anyone help? It is driving me mad and causing me major issues. My outlook is Outlook 2010 on a windows 8 PC. As I have said it worked fine then one day decided to stop sending emails.
Thanks for your help.

Hi - this problem is discussed here:
https://discussions.apple.com/thread/5375046?start=0&tstart=0

Do I need to change any settings to connect my mac book pro to my tv?

Do I need to change any settings on my mac book pro to connect to my tv

Almost certainly, yes. Did you want to know which settings?
Exactly what settings you would need to change, where, and to what would depend on many factors, including at least the following:
* what model MBP you have (which will tell us the connector available),
* what version of Mac OS X it runs (which will tell us the settings available),
* what sort of TV you have (resolution, what connectors it offers, how they are switched, etc.),
* what connecting facilities you have (like wires or an AppleTV),
* how you want to use the TV (primary screen, secondary screen, mirror screen, sole screen),
* whether you want to play audio through the TV,
and even
* where the TV is located with respect to the MBP.
Simple case: New enough MBP to have HDMI output, running a recent OS X, TV new enough to have an available HDMI input, an HDMI cable on hand, using the TV as a secondary screen, and you don't care about how the screen positions relate or where the audio plays. You might be able to get away with default settings on the computer, but you'll still probably have to switch the TV to the HDMI input, and you'll have to drag windows onto the new screen.

Changing Broadcaster settings

Similar Messages

Maybe you are looking for