Changing cell padding does not change margin

The text in the cell of an existing table is clearly indented from the cell border. However, the cell padding is set to 0. When I change the cell padding to 10, 50, or any other number, the text margin does not change.
I am trying to create another table. The text in the new table is flush left. Whatever I set the cell padding to, the text margin does not change.
The documentation indicates that the only way to change the cell margins is to change cell padding. Obviously that does not work. How do I change the cell padding?
Thank you.
Cathy

Can you please anwser couple of queries to nail down the issue?
1) Please let us know the Contribute Version and OS you are using.
2) Is this happening with a particular page?
3) Can you try creating a new blank page, insert a table and modify the Cell Padding value.Check whether it is getting reflected and also verify the cell padding parameter is added in the code.
4) Previously if it worked and broken suddently, please try clearing the Contribute preference. Refer to the blog post, blogs.adobe.com/contribute/2011/11/launch-contribute-freshly-by-deleting-preferences.html

Similar Messages

When Matching Users Via Email, Changing Email Address Does Not Change Login

Well, the subject pretty much says it all, but here're some examples of what's going on:
Initial Data
- Create 2 Business Partners in SAP, C1 and C2.
- Create 2 Contact Employees in SAP, Adam with email adam at eden.org in C1 and Eve with no email in C2.
Synch
- Run Initial Synch followed by Standard Synch (for good measure).
- Web Tools gets user Adam with username adam at eden.org.
- Web Tools gets user Eve with username 2, the unique key for SAP's Contact Employee.
Data Change In SAP
- Adam's email is removed.
- Eve's email is populated with eve at eden.org.
Resynch
- Run Standard Synch.
- Web Tools changes both email addresses, with Adam's being erased and Eve's becoming eve at eden.org.
- Web Tools does not change the UserID, leaving Adam's as adam at eden.org and Eve's as 2.
That last bullet is the big problem: if a user changes an email address, the username doesn't change. Is there any way to change this across the board, or perhaps even force users to login via their current email address?

Also, there is a field in the Users table called EmailLogin. I have tried without success to change this field so that the user would use this field to login instead of the UserID, but have been unsuccessful in getting it to work.
As an alternative, the login control in /plugins/loginblock.ascx contains, as a portion, the following code:
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        NPUser user = new NPUser(loginMain.UserName);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Wouldn't it be simple to do the following?
    protected void GetUserIDFromDBByEmail(string email) {
        string userid;
        System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection();
        System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand(conn, "SELECT Users.UserID FROM Users WHERE Users.Email='" + email.Replace("'", "''") + "'");
        userid = (string)cmd.ExecuteScalar();
        cmd.Connection.Close();
        conn.Close();
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        string userid;
        // Though we're passing the "username" from the form,
        // we know that we're expecting the email to be in it
        userid = GetUserIDFromDBByEmail(loginMain.UserName);
        NPUser user = new NPUser(userid);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Again, the benefit to this is that you can synch using the Internal B1 Contact Code, which will remain constant and unique, and have the availability to change the way the user logs in by modifying the email address. Of course, email addresses would have to remain unique as well, but that's an easy enough thing to check for.

Changing Paper size does not change page break?

I am using Oracle Report R6i.
I have created a matrix report showing months horizontally and items vertically. By default, the report displays a vertical line (Page Break Line) at 8 inches (as shown in Ruler).
I change the paper size in Page Setup Menu but still the page break line displaying at 8 inches due to which only 03 months are displaying per page at Landscape mode. My page size is : 210x230 cm.
How can I extend that page break line so that atleast 6 months to be displayed per page.
Regards,
Luqman

Changing the size used by the printer with the page setup dialog does not affect how Reports formats the output. You need to change Reports page size for this.
In 6i, the page size for Reports is controlled by properties against the Section objects (header, main, trailer) in the navigator.
In 2.5 you would set the vertical and horizontal page size in the Reports property palette for all sections. With the introduction of individual sections in 6i, each section can have it's own page size.
In your example you probably want to change the page size against the "main section" to 13" x 8.26" to get the report to format in Landscape. Also remember to set the ORIENTATION parameter or property to "Landscape" so that the printer is set to Landscape as well.

Changing Datasource Location Does not Change Procedure Name

Is there a way to change the name of the stored procedure in the field explorer after changing the datasource location? I've changed stored procedures in my report but it keeps the old name. Crystal Reports 11 v2

-Database/Database Expert
-Highlight SP on right hand database tree
newSP
...this renamesÂ spÂ prefixÂ acrossÂ all formula and output fields in report It's really an alias: it does not physically change the SP name.

Changing Apple ID does not change in all Apps

I recently (within the last year) changed my ISP and switched my email account. The old email was registered to my Apple ID and when I switched, I also changed the email to be my new Apple ID using "manage my apple id" online. This means that the Apple ID should be the same account, just a different name. There seemed to be no problems with this change on my iPhone and iTunes, but on my Macbook several applications are still looking for my old email for the Apple ID. These include iCloud and Messages.
I changed the Apple ID on my user in Users & Groups in System Preferences using the Change... option. I only have one user on the system and it is the Admin account. I can't find a way to change this in iCloud however. Messages isn't much of a problem, but more of an inconvenience. Every time I log in to my user account, the Messages dialog pops up asking me to sign in with the password to my Apple ID and displays the old one. I just cancel out of this. In the Messages application however, I have removed the old account and added the new one and I am able to send and receive messages using it.
Why are these apps still asking me for my old Apple ID when my Admin Apple ID is my new one?

Hi,
iCloud and the iMessages servers are effectively independent of the others.
You can in fact use different IDs for iTunes, iCloud and iMessages.
Start with System Preferences > iCloud.
There is no setting in here for enabling Messages (i.e. it has no links with any form account there).
Use the Sign Out button to disable the current Apple ID and then add the new one.
Do the same in Messages > Preferences > Accounts for the iMessages account.
As you have Mountain Lion use the Details Button then the Sign Out one in the next pane.
I have two of my several Apple IDs listed in th Users and Groups pane but it also is deactivated as regard to changing password resets.
You can alos use an Apple issued email ID as A Valid AIM screen name in Messages (Add under AIM/AOL depending on version)
This means @mac.com and iCloud issued @me.com and @icloud.com can be used as AIM Screen Names.
This may mean you can have it as the iMessages ID and as a Screen name.
9:12 pm Wednesday; March 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Saskatchewan does not change to daylight savings time

Saskatchewan does not change to daylight savings time but my calendar on my iPhone 5s changed and my iMac stayed the same and the iMac time is the correct one

Automatically changing the date and time when set to automatically is carrier dependent since that is acquired by the cell tower the iPhone is connected with.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

Hi Janedance1,
If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
Please let us know how it goes.
Best,
Sara

Tables are deleted but database size does not change in sql server 2008r2

Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.

Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

try using a different browser, or contact support Contact Customer Care

ICal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed on alert.

iCal failing to run applescripts: The 'Open' button does not change to 'Run', and the script file is opened but not executed.

Calendar (not called iCal anymore) does not include that capability any longer, apparently. What you have to do now is go to Automator and create a Calendar Alert action. You can add a Run AppleScript object to the action and paste in your script there, then when you save it, it will become available as a choice in the alert menu in Calendar.

STMS problem ( import status - import runnig does not change)

I have the same problem like this:
While Transporting request in our production server the status of request from import running (truck sign) does not change.
But the effect of the request is seen in the production but status does not change.
see :Re: STMS problem ( import status - import runnig does not change)
I did se14 as experts suggested, the history truck sign go away,seem work fine,
but when new request need STMS to trans, the truck sign happened again,
I need you help,thank you!

thanks for all reply,
the last two answers are the same,I think this is the right key,
I'm a ABAPer actually,yesterday I asked our headquarters basis to help,
and I don't know what he did,now this problem is be solved,
PS:I use AL11 to find .LOB now,but not find(maybe it's deleted by our basis),
thanks again!

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

I am in Muse 2014.3. When I edit a page, in the preview everything looks fine, but when I upload it to FTP, the page does not change, even when I upload the whole site. Is this a bug? I don't know what to do.

Hi Jaap,
Are you sure about your FTP credentials (FTP folder and site URL) that you are using for the upload? Are you able to see the updated files in the remote directory of the FTP server, after you finish uploading the muse file, using an external FTP client like FileZilla?
Thanks
-Prashanth

Why the mouse pointer in Logic Pro does not change shape during work in OSX 10.9.1?

I've a MacBook Pro Retina 15-inch Late 2013 and I'm using two external displays. One connected to to the HDMI port (display 1) the other to thunderbolt (display 2). The MacBook display is closed. I’m working with Logic Pro 9.1.8 (32bit) with OSX 10.9.1
Why the mouse pointer in Logic Pro does not change shape during work???
It was already difficult with OSX 10.9 but now after upgrading to 10.9.1 it's game over!
At least before I could select which display use Logic Pro to have all the shape functions of the pointer. Not in both displays, so to be forced to edit in ONLY ONE of the two displays using this workaround: (right click on Logic icon in Dock: Option --> Desktop on Display 1). Now or I select “Option --> All Desktops” or does not work. However, by selecting all displays you say goodbye to Mission Control. This can’t be a solution!!!
The amazing thing is that Nuendo has no problem while Logic Pro, Apple's native software, it can't!
With Nuendo it’s indifferent in which display you are working, the shape of the mouse pointer changes shape depending on the requirement in both displays.
This thing drives me crazy!
Solutions?
Here some ideas in other foums:
http://www.logicprohelp.com/forum/viewtopic.php?f=1&t=86264
But this aren't really solutions but workarounds. Use Logic in all desktops makes Mission Control useless!!

I installed all over again by formatting as suggested by the genes of pro application support. Each plug-in, each virtual instrument, a job that lasted 3 days. And as suggested for each new plug-in I proceeded to check the proper functioning of Logic Pro and did each time a back up with Time Machine.
The Result:
Logic works as it should ONLY on the primary monitor and ONLY on the first desktop.
BUT
Reason and Nuendo dont' have this issue !!
I believe that Apple developers are thinking only to mobile phones and things like messages or face time.
And that's not all!
After a few weeks, perhaps by installing a version of Adobe Acrobat, I say maybe because I'm not sure, logic has stopped working properly. Again problems with the mouse pointer.
Luckily I had a back up! But now I'm terrified to install new programs. Thanks Apple!

Changing cell padding does not change margin

Similar Messages

Maybe you are looking for