Changing Paper size does not change page break?

I am using Oracle Report R6i.
I have created a matrix report showing months horizontally and items vertically. By default, the report displays a vertical line (Page Break Line) at 8 inches (as shown in Ruler).
I change the paper size in Page Setup Menu but still the page break line displaying at 8 inches due to which only 03 months are displaying per page at Landscape mode. My page size is : 210x230 cm.
How can I extend that page break line so that atleast 6 months to be displayed per page.
Regards,
Luqman

Changing the size used by the printer with the page setup dialog does not affect how Reports formats the output. You need to change Reports page size for this.
In 6i, the page size for Reports is controlled by properties against the Section objects (header, main, trailer) in the navigator.
In 2.5 you would set the vertical and horizontal page size in the Reports property palette for all sections. With the introduction of individual sections in 6i, each section can have it's own page size.
In your example you probably want to change the page size against the "main section" to 13" x 8.26" to get the report to format in Landscape. Also remember to set the ORIENTATION parameter or property to "Landscape" so that the printer is set to Landscape as well.

Similar Messages

Tables are deleted but database size does not change in sql server 2008r2

Hi All,
20GB Tables are deleted in my database but database size does not change and disk size showing same size.

Hi ,
I have ran the Disk usage by Top Tables report and Identified couple of tables with unwanted data for last 5 years. I have deleted the data for the first 3 years and then ran the Disk usage by Top Tables report again. When I compared the report before
and after the data deletion, I have noticed certain facts which is not matching with what I know or learned from experts like you. The following are the points where I am looking for clarification:
1.Reserved (KB) has been reduced. I was expecting the data Reserved (KB) will remain the same after the data deletion.
2. The Data(KB) and Indexes(KB) fields have been reduced as expected. The Unused(KB) field have been increased as expected.
I was expecting the total of Data(KB) and Indexes(KB) field space gained will be equal to the Unused(KB) field gained after deleting the data. But that is not the case. When I deducted(subtracted) the difference in the Reserved(KB)(Difference before
and after data deletion) field from the Total of space gained from the data deletion is equal to the Unused(KB) gained field value.
I am not a SQL expert and not questioning but trying to understand whether we really gain space by deleting data from the tables. Also keen to get the concepts right, but my testing by deleting some records confused me.
Looking ahead to all your expert advice.
Thanks,
Vennayat

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

In Adobe Acrobat X Standard, our user used to be able to resize drawings to 8.5 x 10, it stopped working yesterday. It allows her to do this without an error but the size does not change?

Try unmounting the volume on your iMac using Disk Utility. Then mount it again. You may need to reboot the laptop or relaunch its Finder process (using the Force Quit window) after remounting the drive on your iMac. Remember that no process may be accessing any files on the drive you plan to unmount, or the unmount will fail. Unmounting and remounting an external drive on my iMac made it become visible on my MacBook Pro after it had disappeared.

When Matching Users Via Email, Changing Email Address Does Not Change Login

Well, the subject pretty much says it all, but here're some examples of what's going on:
Initial Data
- Create 2 Business Partners in SAP, C1 and C2.
- Create 2 Contact Employees in SAP, Adam with email adam at eden.org in C1 and Eve with no email in C2.
Synch
- Run Initial Synch followed by Standard Synch (for good measure).
- Web Tools gets user Adam with username adam at eden.org.
- Web Tools gets user Eve with username 2, the unique key for SAP's Contact Employee.
Data Change In SAP
- Adam's email is removed.
- Eve's email is populated with eve at eden.org.
Resynch
- Run Standard Synch.
- Web Tools changes both email addresses, with Adam's being erased and Eve's becoming eve at eden.org.
- Web Tools does not change the UserID, leaving Adam's as adam at eden.org and Eve's as 2.
That last bullet is the big problem: if a user changes an email address, the username doesn't change. Is there any way to change this across the board, or perhaps even force users to login via their current email address?

Also, there is a field in the Users table called EmailLogin. I have tried without success to change this field so that the user would use this field to login instead of the UserID, but have been unsuccessful in getting it to work.
As an alternative, the login control in /plugins/loginblock.ascx contains, as a portion, the following code:
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        NPUser user = new NPUser(loginMain.UserName);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Wouldn't it be simple to do the following?
    protected void GetUserIDFromDBByEmail(string email) {
        string userid;
        System.Data.SqlClient.SqlConnection conn = new System.Data.SqlClient.SqlConnection();
        System.Data.SqlClient.SqlCommand cmd = new System.Data.SqlClient.SqlCommand(conn, "SELECT Users.UserID FROM Users WHERE Users.Email='" + email.Replace("'", "''") + "'");
        userid = (string)cmd.ExecuteScalar();
        cmd.Connection.Close();
        conn.Close();
    protected void loginMain_LoggedIn(object sender, EventArgs e) {
        string userid;
        // Though we're passing the "username" from the form,
        // we know that we're expecting the email to be in it
        userid = GetUserIDFromDBByEmail(loginMain.UserName);
        NPUser user = new NPUser(userid);
        ((NPBasePage)Page).Login(user.UserID, user.AccountID, false);
Again, the benefit to this is that you can synch using the Internal B1 Contact Code, which will remain constant and unique, and have the availability to change the way the user logs in by modifying the email address. Of course, email addresses would have to remain unique as well, but that's an easy enough thing to check for.

Changing cell padding does not change margin

The text in the cell of an existing table is clearly indented from the cell border. However, the cell padding is set to 0. When I change the cell padding to 10, 50, or any other number, the text margin does not change.
I am trying to create another table. The text in the new table is flush left. Whatever I set the cell padding to, the text margin does not change.
The documentation indicates that the only way to change the cell margins is to change cell padding. Obviously that does not work. How do I change the cell padding?
Thank you.
Cathy

Can you please anwser couple of queries to nail down the issue?
1) Please let us know the Contribute Version and OS you are using.
2) Is this happening with a particular page?
3) Can you try creating a new blank page, insert a table and modify the Cell Padding value.Check whether it is getting reflected and also verify the cell padding parameter is added in the code.
4) Previously if it worked and broken suddently, please try clearing the Contribute preference. Refer to the blog post, blogs.adobe.com/contribute/2011/11/launch-contribute-freshly-by-deleting-preferences.html

Color laserjet 2605dn changing paper type does not make the change at printer

I've had this printer for 2 years and have had this problem from time to time. This time I have not been able to find a cure. I'm running Win 7, 64 bit and the printer is on wired network.
When I change the paper type in the driver page to photo paper, the printer should slow the paper feed to allow for extra thickness. It doesn't, but I can change the speed by using the printer control panel to set it to photo paper (a bit of a pain since the printer is in a different room and it must be switched back to plain paper the same way when done).
I downloaded and installed the latest drivers (version 5.1.0.1), but this didn't help. The printer is still useable, but very inconvenient to use, so any help would be appreciated.
Thanks for any assistance you can provide.
Don

Look's like there are 3 different Universal print drivers (UPD) on the site. PCL6, PS and PCL5. I recommend testing the PCL5 driver if you haven't as yet. It is bizarre that this happens from time to time, but you cannot get it going again using teh same methods. Don't know if you have swapped out the network cable to see if that makes any difference. You can also try installing via USB to see if the problem continues in that type of connection, then run the network install again.
Is it critical that the unit slow down for this particular paper thickness? Have you noticed any print quality issues by leaving it unchanged?
Good luck.
Though I work for HP, My posts express MY opinion, and not those of HP.

Screen Size does not changes automatically

Hi,
I am developing on ADF BC, 10.1.3.2, on 17" monitor. Every thing looks fine on my system.
However, when I deploy the package on a 15" monitor, all screens does not fit within the explorer screen... Why ... Any settings is missing ....
Needs some help
Ravi Shankar Swamy

Hi,
Well, first think I did was this action. However, the client does not like that resolution, since you see very small fonts. Now, do I have to re-design every thing for the lower resolution or any settings exists to change globally ... windows.height and windows.width... or anything else.
Ravishankar S

Changing Datasource Location Does not Change Procedure Name

Is there a way to change the name of the stored procedure in the field explorer after changing the datasource location? I've changed stored procedures in my report but it keeps the old name. Crystal Reports 11 v2

-Database/Database Expert
-Highlight SP on right hand database tree
newSP
...this renamesÂ spÂ prefixÂ acrossÂ all formula and output fields in report It's really an alias: it does not physically change the SP name.

After upgrading to version 10.0.2, the pinch and close to change font size does not work

I'm using Mac OS X version 10.6.8. The pinch and close works with Safari but not Firefox 10.0.2

Some gestures have been removed in Firefox 4+ versions.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
* browser.gesture.pinch.in -> cmd_fullZoomReduce
* browser.gesture.pinch.in.shift -> cmd_fullZoomReset
* browser.gesture.pinch.out -> cmd_fullZoomEnlarge
* browser.gesture.pinch.out.shift -> cmd_fullZoomReset
* browser.gesture.pinch.latched -> false
*http://kb.mozillazine.org/about:config
*https://addons.mozilla.org/firefox/addon/pinchy/

Changing Apple ID does not change in all Apps

I recently (within the last year) changed my ISP and switched my email account. The old email was registered to my Apple ID and when I switched, I also changed the email to be my new Apple ID using "manage my apple id" online. This means that the Apple ID should be the same account, just a different name. There seemed to be no problems with this change on my iPhone and iTunes, but on my Macbook several applications are still looking for my old email for the Apple ID. These include iCloud and Messages.
I changed the Apple ID on my user in Users & Groups in System Preferences using the Change... option. I only have one user on the system and it is the Admin account. I can't find a way to change this in iCloud however. Messages isn't much of a problem, but more of an inconvenience. Every time I log in to my user account, the Messages dialog pops up asking me to sign in with the password to my Apple ID and displays the old one. I just cancel out of this. In the Messages application however, I have removed the old account and added the new one and I am able to send and receive messages using it.
Why are these apps still asking me for my old Apple ID when my Admin Apple ID is my new one?

Hi,
iCloud and the iMessages servers are effectively independent of the others.
You can in fact use different IDs for iTunes, iCloud and iMessages.
Start with System Preferences > iCloud.
There is no setting in here for enabling Messages (i.e. it has no links with any form account there).
Use the Sign Out button to disable the current Apple ID and then add the new one.
Do the same in Messages > Preferences > Accounts for the iMessages account.
As you have Mountain Lion use the Details Button then the Sign Out one in the next pane.
I have two of my several Apple IDs listed in th Users and Groups pane but it also is deactivated as regard to changing password resets.
You can alos use an Apple issued email ID as A Valid AIM screen name in Messages (Add under AIM/AOL depending on version)
This means @mac.com and iCloud issued @me.com and @icloud.com can be used as AIM Screen Names.
This may mean you can have it as the iMessages ID and as a Screen name.
9:12 pm Wednesday; March 5, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Final print size does not match screen view.

Hi
I am having problems getting my final prints to match the screen view. Most recently I have had this problem: I have an image that is sized to 5X7. I have it on a 5X7 template in the print module of Lightroom. The image dimensions in Lightroom say 5X7. I print on 5X7 paper (I actually measured it to be sure). ON the screen they look perfect, match the the templates and measure out fime with the onscreen rulers. Without fail a portion of the print is cut off on the final print. The long side of the print is the most effected. This is not just limited to 5X7's, it happens across the board. Is this a common problem or I am I doing something wrong? In the 5X7 example above the print comes out 5.2 X 7.3 give or take. I am using Lightroom 5.3 on an iMac running OS 10.9.1. The printer is a Canon Pro 100.
I welcome any help with this.
Thank you
Joe

If the problem is that the printed image is being scaled larger, this is a very common side effect with borderless mode settings in print drivers. Typically, (though sometimes you can prevent this where alternative borderless options are given) - an extra unrequested scaling % ensures that any physical mis-registration or inaccuracy of the paper size, does not leave any accidental white edges.
That's nothing to do with LR's end of the process, if so.

IDCS3 "page size does not fit w margin/column" error when changing bleed

Anyone know the source of this problem?
After deselecting "allow pages to shuffle" my bleed automatically, mysteriously, changes from 0pt to 9pt. When i try to change it back, I get an error: "This page size does not fit with the current margin and column settings. . ."
This happens on multiple docs.
The problem occurs in both Tiger and Leopard.
Help!
Thanks

I'm having the same problem in CS4 when I try to create a document. I zeroed out the margins and gutters too but I didn't have any luck. It's also inconsistent in my case. I can create a document the size of a US business card with a margin of 3p0 but when it get's to something bigger than that but smaller than a letter, no gutter or margin will work.
But that only applies to document creation for some reason. So far, my workaround has been to create a default document and then resize it using the document setup after the fact. It's a pain and it's weird, but that's what I've had to do.
If you've come up with a better solution since your post, I'm all ears.

How do I change the paper size in an existing Pages document?

How do I change the paper size on an existing Pages document?

So are your text box set to floating? You can tell that by looking in the Inspector>Wrap Tab when you select the text box.
If I had to guess I would say that the text boxes are floating and when you change the size of paper the text that you have in the main body area is shrinking so that it does require as many pages and you are losing the text boxes at the end. Is that correct? If so, they are still there, you just have to add page breaks to get to the pages that you lost and you should see them again.

On certain sites, some lines have the lower half missing. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

On some sites certain lines appear with the bottom half missing, as if obliterated. Changing the font or its size does not help. The error does not appear with Iceape or Chromium.

I looks that the whole line doesn't fit in the container, so the bottom part is cut off. The usual cause is that a font is used that takes more vertical space, so any increase or changes from the font in what the website prescribes can cause this issue. I've seen web pages that were even affected by changing the minimum font size from none to 1 (!). If you do not have the font installed that the website specifies then Firefox will fallback to another (default) font that may have different dimensions.

Save of edited file does not change file size correctly

I have QT pro 7.6 and have all the latest DirectX and drivers for my PC. I have a problem with file size reporting correctly for edited files.
For example, I have three files: A.MOV (10mb), B.MOV (15mb), and C.MOV (25mb). If I load A and then copy B and C to the end of it, I can do a File Save As to create D.MOV as a self contained movie which shows estimated size as 50mb. And the saved file IS 50mb.
However, If (after appending B and C to the end of A) I just do a "Save" command, A.MOV file size is not changed and still shows 10mb. The whole movie A-B-C plays correctly, but the file size is incorrect. Where is the rest of the data? I know the new A.MOV is self contained because I can delete B and C and it still plays all three segments. I'm concerned that if the file size is reported incorrectly there is the chance that the data will get lost in a future copy or move operation. Does anyone else experience this bug or is it just something in my PC?

I stopped following this issue a few years ago, but as I recall, this is a known bug in the way PSE handles the writing of the tags to the photo files.
I stopped following this issue because I switched to Lightroom which does not have this issue. Yes, you could do this with Exiftool and re-save the metadata from PSE, seems kind of cumbersome.
Also, please note that if you Export the file from the PSE Organizer, as far as I know the proper tags should appear, so if you want the proper tags in your files, you could use this feature.

Changing Paper size does not change page break?

Similar Messages

Maybe you are looking for