Changing Database from 11G R1 to 11G R2. Do I reinstall OBIEE 11.1.1.5?

Vista 64, single machine setup. I currently have Oracle 11G R1 Database (11.1.0.7) installed and also OBIEE 11G (1.1.1.5) installed, with its repository in this existing Oracle 11G R1 Database (11.1.0.7). I am now going to uninstall the existing database (11.1.0.7) and do a fresh install of a new Oracle Database 11G R2 (11.1.2.0).
Question: Can I somehow keep my current install of OBIEE 11.1.1.5 and point it to the new 11G R2 (11.1.2.0) database? Or should I uninstall OBIEE 11.1.1.5 also and do a fresh OBIEE 11.1.1.5 install once the new 11G R2 database(11.1.2.0) is installed?
I don't need to maintain anything (data, dashboards, reports, etc) from the existing OBIEE 11.1.1.5 installation. Just looking for advice on the easiest route to take on this. Thanks.

Hi All
I know this is a little bit old post. But wanted to share some information.
1. When a OBIEE Domain is created, it access the rcu schemas using DataSources. These DataSources can be edited from Weblogic Console anytime. Basically these files will have actual RCU Schema details like db host, port, username, password, any JNDI Names. The physical files are located at this location (in typical windows default it will be like this. The value before the user_projects will be different based on the name for middleware home that you give:
C:\Oracle\Middleware115BI\user_projects\domains\bifoundation_domain\config\jdbc
DO NOT edit these files manually. But login into weblogic console, on left side select services -> ..> and each DataSource, and Connection Pool for each datasource and edit the values to refer to the NEW DB host, port, username, password etc. Do this for all the 4 datasources that you find in above location.
2. Also obiee has something called instance1 that runs the OPMN Services. I am not sure if the rcu db details are reffered here. But if they do then you may have to modify the connection details here also.
If you are starting from scrach for the very first time, then first install Oracle Database. Run RCU Schema to create obiee schemas. Then install OBIEE. Because at one point if you choose to create simple edition, it does prompt for these rcu database details. So maintain this order of installation.
Whether its OBIEE weblogic domain or opmn services, we expect them to refer the rcu details something like usign DataSources which are configurable from console or some other way.
Thanks
Ravi Jegga

Similar Messages

How to manage oracle 9i databases from 11g ?

Is there any option similar to 9i OEM's "Add Database to tree" in 11g ?
currently I monitor 30 databases, all running 9iR2, using enterprise manager console. I had removed Oracle 9i from my system to install 11g, so is there anyway to monitor 9i database from 11g or do I have to re-install 9i into a new home ?
My system is Windows XP and most databases are on linux.

What, precisely, do you mean by "11g Enterprise manager console"? Are you talking about a web-based interface? Or a Java-based console application?
If you have not done a separate OEM install, you're most likely using the database control, as web-based interface that allows you to manage a single database. You would need to install the Grid Control in order to manage multiple databases through the same interface.
You're probably right, that's why I asked the question. Perhaps the original poster meant the "10g Enterprise Manager console". Perhaps he meant the "11g Enterprise Manager Database Control". Perhaps he meant the "11g Enterprise Manager Grid Control". Or perhaps he meant something different (i.e. SQL Developer is a console application that ships with 11g and has a variety of reporting scripts).
The OP for the 11g installation could not have possibly made a separate OEM install, OEM is not included in 11g any more and he has not mentioned trying such intall. The OP was clear enough, so IMO there is no confusion, 30 9i databases, 1 11g database. There was not a 10g in between. I would not go so far as to say an 11g grid control, since there is no such grid control, the latest version for grid control is 10.2.0.4.0 for R2 and 10.1.0.3.0 for R1. And SQLDeveloper, yes, it is a java application included with 11g, and you can launch scripts from there, but in no way it is a managing environment the way the OP pretends.
Regards.
~ Madrid
http://hrivera99.blogspot.com

Changing databases from MS SQL Express to MySQL in a Report at runtime

Hi all,
I have an issue in changing databases from MS SQL Express to MYSQL or vice versa in a Report at runtime.
Here is what I do:
I create a very simple report with the Crystal Report Designer 2008 V 12.3.0.601.
This report uses a stored procedure to retrieve it's data. I connect to the Database with JDBC.
I have two Databases with similar schema and procedures: MS SQL Express an MySQL.
When I create the report with MSSQL all parameters have the '@' character, as they are named. ok.
I deploy this report in a JSP application with the crystaldecisions SDK an show it in html viewer format.
The connection to the MSSQL DB gets established by my JSP and the CRJavaHelper.
I pass the parameters through my URL to the JSP and finally to the CRJavaHelper (addDiscreteParameterValue)
and everything works fine.
The challenge starts, when I try to change the Datasource of this report to MySQL at runtime (which is a requirement in my project).
I successfully can establish the DBConnection, but my stored procedure just doesn't get called!
The report just displays totally empty, no Exceptions etc. are thrown. In the DB logfile I see the effort to find my procedure
and that's all. The Statements called by the SDK finds the correct Procedure, but there's no call to the procedure.
Of course I know, that MS SQL names it's procedures slightly different (';1' at the end), but even when I rename the table Alias to the correct name in CRHelperJava, I get no call to the procedure in MySQL. I also renamed the parameter-fields in changeDataSource(..) by casting the table to IProcedure and working on its methods. Still no success.
What am I missing to do or what do I do wrong?
Any suggestions or even solutions?
Best Regards,
Tom

after all I have managed to set param Values, now I'm stuck because the parms seem to have dissappeared in the formula fields. E.g. I receive this Exception:
<br><br>
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.---- Error code:-2147467259 Error code name:failed
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:2285)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:733)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:167)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:529)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:527)
     at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(SourceFile:102)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(SourceFile:525)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(SourceFile:424)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(SourceFile:352)
     at com.businessobjects.sdk.erom.jrc.a.a(SourceFile:54)
     at com.businessobjects.sdk.erom.jrc.a.execute(SourceFile:67)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent$a.execute(SourceFile:716)
     at com.crystaldecisions.proxy.remoteagent.CommunicationChannel.a(SourceFile:125)
     at com.crystaldecisions.proxy.remoteagent.RemoteAgent.a(SourceFile:537)
     at com.crystaldecisions.sdk.occa.report.application.RowsetController.getSQLStatement(SourceFile:1485)
     at org.apache.jsp.report_jsp._jspService(report_jsp.java:360)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:386)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:313)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:260)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:859)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     at java.lang.Thread.run(Unknown Source)
Caused by: com.crystaldecisions.reports.dataengine.DataEngineException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.
     at com.crystaldecisions.reports.dataengine.DataSourceManager.do(SourceFile:692)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.new(SourceFile:607)
     at com.crystaldecisions.reports.dataengine.DataSourceManagerCoordinator.a(SourceFile:505)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.a(SourceFile:1060)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:729)
     at com.crystaldecisions.reports.dataengine.DataProcessor2.a(SourceFile:699)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.i(SourceFile:1308)
     at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.k(SourceFile:1297)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1310)
     at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:661)
     ... 32 more
Caused by: com.crystaldecisions.reports.formulas.FormulaException: Ausnahme in Formel ""{@DurationMin}"" bei ""{dataProc.Duration}"":
Dieser Feldname ist unbekannt.
     at com.crystaldecisions.reports.formulas.o.a(SourceFile:1041)
     at com.crystaldecisions.reports.formulas.o.do(SourceFile:1013)
     at com.crystaldecisions.reports.formulas.o.new(SourceFile:688)
     at com.crystaldecisions.reports.formulas.o.else(SourceFile:459)
     at com.crystaldecisions.reports.formulas.f.void(SourceFile:65)
     at com.crystaldecisions.reports.formulas.FormulaParser.a(SourceFile:345)
     at com.crystaldecisions.reports.formulas.r.a(SourceFile:89)
     at com.crystaldecisions.reports.formulas.FormulaInfo.a(SourceFile:570)
     at com.crystaldecisions.reports.formulas.FormulaService.compile(SourceFile:347)
     at com.crystaldecisions.reports.reportdefinition.FormulaCompiler.a(SourceFile:139)
     at com.crystaldecisions.reports.reportdefinition.FormulaFieldDefinitionBase.compile(SourceFile:928)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:1360)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:1348)
     at com.crystaldecisions.reports.reportdefinition.o.a(SourceFile:4225)
     at com.crystaldecisions.reports.dataengine.DataSourceManager.do(SourceFile:687)
     ... 41 more
<br><br>
where dataProc is my stored procedure and @DurationMin is a function field.
do I have to call verifyDatabase() when I have changed DBs and set the param Values?
Is there a defined sequence to execute these steps?
Edited by: tomspengler on Dec 8, 2011 1:55 PM

Change database from NoArchivelog to Archivelog

Hi,
I currently using oracle9i(9.2.0.2) under w2k. How can I change database from NoArchivelog node to Archivelog node?
Thanks
Ken

If your using an spfile, then you can do the suggested using ALTER SYSTEM with the SCOPE=spfile; condition otherwise when you restart your instance the changes won't be recognized (if you're using an init.ora file then change it in the init.ora, but don't try to edit the spfile with a text editor, you'll corrupt it)
With the database open, issue
ALTER SYSTEM SET log_archive_start = true SCOPE=spfile;
ALTER SYSTEM SET log_archive_dest_1 = "location=c:\Oracle\oradata\orcl817\archive" SCOPE=spfile;
ALTER SYSTEM SET log_archive_format = %%ORACLE_SID%%T%TS%S.ARC SCOPE spfile;
Then do the shutdown and mount etc. as described above
Andy

How change database from mode MTS (Shared) to mode Dedicated?

How change database (Oracle 8.1.7) from mode MTS (Shared) to mode Dedicated?

Did you try it ? Look at this :
TEST =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVICE_NAME = test)
      (SERVER=SHARED)
SQL> show parameter mts
NAME                                 TYPE    VALUE
mts_circuits                         integer 170
mts_dispatchers                      string (protocol=tcp)(dispatchers=2)(
                                             connections=500)
mts_listener_address                 string
mts_max_dispatchers                  integer 5
mts_max_servers                      integer 20
mts_multiple_listeners               boolean FALSE
mts_servers                          integer 2
mts_service                          string test
mts_sessions                         integer 165
SQL> conn scott/tiger@test
Connected.
SQL> conn / as sysdba
Connected.
SQL> alter system set mts_dispatchers='(protocol=tcp)(dispatchers=0)(connections=0)'
SQL> /
System altered.
SQL> alter system set mts_servers=0;
System altered.
SQL> conn scott/tiger@test
ERROR:
ORA-12520: TNS:listener could not find available handler for requested type of
server
Warning: You are no longer connected to ORACLE.
SQL>                                                                                                                  However, as I said in my previous posting, you should modify initSID.ora too. If not, next time you'll restart your DB, it will run in shared mode again.

Move Database from 11g SE to XE

Good day!
I need to move a 64-bit server is Oracle 11g Standart Edition for free Oracle XE 11g R2 32-bit.
Please help, how do I do this?
If I do a backup of the SE database with RMAN, and restor it to the XE, I get the error on startup when database opening ORA-00904: "EDITION": invalid identifier.
The same error when manually copy data files, re-create the service, and spfile controlfiles.
If I do a full export from SE, get a bunch of errors when importing to XE.

I need to move a 64-bit server is Oracle 11g Standart Edition for free Oracle XE 11g R2 32-bit.Sounds like an odd direction, if you ask me...
What is the exact version number of your 11 SE?
If I do a backup of the SE database with RMANWhat did you backup? Of course, you can't restore a full backup from SE to XE, because though XE is based on the standard 11.2 installation it has been modified in various aspects.
The same error when manually copy data files.That will never work between different database instances...
If I do a full export from SE, get a bunch of errors when importing to XE.This would be the way I'd recommend for that procedure. How do you export/import and what errors do you get?
-Udo

Import from 11g database to 9i database

how to import the dumpfile on oracle9i database from 11g database?
how to export dumpfile on oracle9i database on windows from oracle10g database on linux?

Hi,
how to import the dumpfile on oracle9i database from 11g database?
try this ..am not sure will it work or not.... try it on test environment......
is it 9i and 11g databases are in same network..if it is in same network..then ok ....and same OS platform ...ok
make a tns entry of 11g's database at oracle 9i host side....try to take exp dump by using oracle 9i binaries ..then import..into destination 9i db.......am not sure it will work or not....test it...if it works well and good...
how to export dumpfile on oracle9i database on windows from oracle10g database on linux?
Not sure....
Edited by: dbc001 on Mar 20, 2013 1:23 PM
Edited by: dbc001 on Mar 20, 2013 1:23 PM

Step by Step EXP / IMP database from Oracle 9i to Oracle 11g

Please help on the captioned where I did the below
1. Use EXP to export the database from a Oracle9i database (O9_DB) OLD_Windows2003_SERVER
2. Install the Oracle 11g (default service name is ORCL) to a new Windows 2003 server and use the IMP to import the O9_DB, however, I need to create the same physical path as the OLD_Windows2003_SERVER (e.g E:\Oralce_9i\Ordata\) in order to complete the IMP
3. I can launch the SQL Developer and obtain the records count of evey tables being imported
However, is there any best / proper way to do the EXP/IMP, the ideal outcome would be
1. Create a new namespace say (OLDDB) which same as the Oracle9i database name so maybe I don't need to modify much on the application side to point to the new database ?
2. IMP the OLDDB to the new namespace OLDDB
Thanks in advance

Hello,
If you create the new Database on a new Server, you could keep the same name for the Database.
To switch from the old Database to the new one, you'll have to change the hostname on the "tnsnames.ora" or in any configuration file which define the database connexion.
About the best way to do the Export/Import, you may have some details on the link below:
http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/expimp.htm#i262317
Else, why do you intend to stay on a Windows 2003 Server, why not moving to Windows 2008 ?
NB: Oracle *11.1* is certified on Windows 2008 and Oracle *11.2* is certified on Windows 2008 R2.
Hope this help.
Best regards,
Jean-Valentin

Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ?

Hi Friends,
Is it possible to Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ? ( as i would like to perform Point In Time recovery)
(or) The only way is to use RMAN convert as mentioned here - Transporting Data Across Platforms
(or) Is there any other method (except exp/imp and data pump)
Regards,
DB

HI
his post describes the procedure required to migrate a database from Windows to Linux using the RMAN Convert Database command.
Both Windows and Linux platforms have the same endian format, which makes possible to transfer the whole database, making the migration process very straightforward and simple.
To migrate between platforms that have a different endian format, Cross Platform Transportable Tablespaces (XTTS) needs to be used instead.
List of Steps Needed to Complete the Migration
The migration process is simple, but as it has several steps it is convenient to be familiar with them before running it.
1. Check platform compatibility between source and target OS
2. Start the database in read only mode
3. Check database readiness for transport from Windows to Linux using DBMS_TDB.CHECK_DB
4. Check if there are any external objects
5. Execute the Rman Convert database command
6. Copy converted datafiles, generated Transport Script and Parameter File to Linux
7. Edit the init.ora for the new database
8. Edit the Transport Script and Parameter File changing the windows paths to Linux Paths
9. Execute the Transport Script
10.Change the Database ID
11.Check database integrity
Thank you

Issue in configuring Standby Database from Active database in 11g by RMAN

POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PM

Hello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg

Facing Parse Errors after upgrading database from 10g to 11g

Hi,
We are facing parse errors in the SQL's after upgrading database from 10g to 11g.
Kindly look into below parse errors.
********************************** Parse Error *****************************************************
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Tue Aug 13 14:13:10 2013
kksfbc 16173533: parse err=942 hd=3c387c4028 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
Select feature from toad.toad_restrictions where user_name=USER or user_name in ( select ROLE from sys.session_roles)
kksfbc 16173533: parse err=942 hd=3c97d83648 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT password
FROM SYS.USER$
WHERE 0=1
kksfbc 16173533: parse err=6550 hd=35185e4278 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        30 anonymous block
319e277050        57 anonymous block
PARSE ERROR: ospid=29813, error=6550 for statement:
BEGIN sys.dbms_profiler."146775420110782746251362632012"; END;
kksfbc 16173533: parse err=942 hd=3c142d8600 flg=20 cisid=3266 sid=3266 ciuid=3266 uid=3266
----- PL/SQL Stack -----
----- PL/SQL Call Stack -----
object      line object
handle    number name
319e277050        67 anonymous block
PARSE ERROR: ospid=29813, error=942 for statement:
SELECT 1 FROM plsql_profiler_data WHERE 0 = 1
Please help.
Regards
Suresh

Hi Suresh,
Apologies for misunderstanding..
Tue Aug 13 14:13:08 2013
kksSetBindType 16173533-2: parse err=1446 hd=3c73061fb8 flg=100476 cisid=173 sid=173 ciuid=173 uid=173
PARSE ERROR: ospid=15598, error=1446 for statement:
SELECT ROWID,ORGANIZATION_CODE,PADDED_CONCATENATED_SEGMENTS,PRIMARY_UOM_CODE,REVISION,SUBINVENTORY_CODE,TOTAL_QOH,NET,RSV,ATP,ORGANIZATION_NAME,ITEM_DESCRIPTION,INVENTORY_ITEM_ID,ORGANIZATION_ID,LOCATOR_ID,LOCATOR_TYPE,ITEM_LOCATOR_CONTROL,ITEM_LOT_CONTROL,ITEM_SERIAL_CONTROL FROM MTL_ONHAND_LOCATOR_V WHERE (INVENTORY_ITEM_ID=:1) and (ORGANIZATION_ID=:2) order by ORGANIZATION_CODE,SUBINVENTORY_CODE,REVISION, organization_code, padded_concatenated_segments
Assuming you see the above error message in the alert log file, which was your original post, follow the below steps:
1 Get the 'ospid' value from the error
2. Issue the below command:
SQL> select request_id,ORACLE_PROCESS_ID
2 from fnd_concurrent_requests
3 where request_id = 15598;
3. After obtaining the request_id
4, Query it from the front-end using SYSADMIN responsibility
Hopefully this should get you the respective concurrent report/program.
Thanks &
Best Regards,

Duplicate database from active database in 11g?

Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g?
I know it's possible from primary to create stby.
Thanks in advance

You may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

Trying to access 10gr2 database from sqlplus utility but it connects to 11g

Hi All,
I am facing below issue while access 10gr2 database from sqlplus.
I am having two oracle homes on one server one belongs to 11gr2 and another belongs to 10gr2.
I want to access a 10gr2 database through sqlplus utility.but instaed of connecting to 10gr2 it is connecting to 11gr2 after I enter a user name and passowrd.
I have set all the env variables such as oracle_home ,oracle_sid and path with respect to Oracle 10gr2.
Can you please let me kno what I need to do to connect to 10gr2 database and not 11gr2 database through sql plus.
Let me know if I need to give any more details on this.
Best Regards,
Dipti S

Hi Rocky,
I got the resolution.
I made a mistake by creating an oracle instance/service(e.g. fsdmo) when Oracle_home was pointing to 11gR2 Directory.so that service was refering to 11gr2 oracle home.
hence when I was setting oracle_sid(fsdmo) and trying to access database instance from 11g sqlplus utility ,it was directing to 11g and not 10g since oracle service was pointing to 11g.
So now after chnaging the oracle home directory to 11g,I am creating a service and its working fine.
thank you so much for responding.
hope I am clear with my reply.
Best Regards,
Dipti S

How to create a database in 11g from an archive taken from 10g

Hi
I appreciate that some of you may find this a silly question, but it is a situation that has been given to me.
The situation in detail is that I am working on project where a part of a company has been sold off to someone else and I am working on part of the separation of IT Systems. The old company has supplied archive (ARC) files containing data that relates to the company which is being sold off. There are files such TSN, listener, and control files. The source data originated from an Oracle 10g database, but it is not possible to download a copy of 10g anymore, and so I have downloaded the earliest version of 11g. I have installed 11g without creating a new database, and my questions are as follows:
1) Is it possible to re-create the database on the supplied data from the archive logs
2) If possible, how do you so it - step by step (I am not a DBA but a Microsoft .Net Developer.
Thanks
Andy

user633278 wrote:
Yes, the DBA has supplied a backup of the database. All I am looking to do is to create from this backup. Is there a simple GUI that can do this for me with minimal touch? As I said I just need step-by-step instructions that can guide me through this so I don't muck it up!
As with many things Oracle the answer is: it depends.
There are too many potential differences between the (unknown) features your 10g database used and the feature set of 11g.
This doc link will give you a sense of how just 'unstraight forward' it can be.
http://docs.oracle.com/cd/E11882_01/server.112/e17222/upgrade.htm
In particular see this section:
Using the Pre-Upgrade Information Tool
After you have installed the software for Oracle Database 11g Release 2 (11.2) and any required patches, Oracle recommends that you analyze your database before upgrading it to the new release. This is done by running the Pre-Upgrade Information Tool from the environment of the database you are to upgrade. The Pre-Upgrade Information Tool is a SQL script included with Oracle Database 11g Release 2 (11.2) software. This is a required step if you are upgrading manually; otherwise, the catupgrd.sql script terminates with errors. Running the Pre-Upgrade Information Tool is also recommended if you are upgrading with DBUA, so that you can preview the items that DBUA checks.
In other words, the normal upgrade path involves performing checks against the CURRENT 10g database to identify any real or potential problems.
Those checks are done BEFORE you take the 10g backup.
You should also search the net for 'oracle 11g restore 10g backup' and read some of the many threads that have been posted with your same question. They will give you a sense that the process can be problematic and dependent on the type of backup (cold, hot) and how it was taken (manually or RMAN).
Your best chances for success are to do things the 'normal' way. That means contacting Oracle support to get the discs/download for 10g and then installing 10g and recovering the 10g database from the current 10g backup. The closer you can make the recovery environment and instance configuration the same as the original the fewer problems you are likely to have.
Or have the old company provide either the original 10g discs or at least provide the installation, control file and configuration information so you can recover the 10g database correctly.
As already suggested you should first make sure you have a reliable COPY of those backup files and you should use that copy for all of your testing of recovery settings.
Please tell us if you think you will be able to obtain the 10g software for reinstallation or not.

Error during dump file Import from 11g DB into XE database

Hi ,
I have a dump file exported from a 11g database. First i imported this dump file into another 11gdb test database and it worked fine.
Later i tried to import it into an XE database. But import completed with error message as shown below. This error message appeared only for few tables.
IMP-00015: following statement failed because the object already exists:
Note - I created a new schema in XE database and tried to import the dump into this schema. So there is no chance for the object to exist before the import operation.
Does anyone have any idea why import in XE fails? Is there any limitation/restriction in XE?
FYI - All the tables that failed to import contains LOB data in it. Is LOB datatype is not supported in XE? Does this cause the problem during import?
Regards,
Ashok Kumar.G

Going from 11g to XE(10g) is problematic for two reasons 1st - 11g exports not necessarily compatible with an earlier version and 2nd I have found that in some cases 11g exports can have problems when importing back into another 11g(11.1.0.7) instance due to stack overruns whereas an 10g export to 11g normally works fine..
./bob h.

Changing Database from 11G R1 to 11G R2. Do I reinstall OBIEE 11.1.1.5?

Similar Messages

Maybe you are looking for