Changing default code in HTML "Create New" page for CS3

When I open dreamweaver and go to File>New>blank Page>HTML, the code that displays when the page is opened isn't what I want. For instance, I'd like to change the XHTML DOCTYPE to 1.0 strict (from transitional).
Is there a way I can get in to the backend of this program and change that code so I don't have to do it manually every time I open a blank html page in DW? Or can I make my own, and then make that my default html page code?
Thanks,
Luke

When you Choose FILE>New, you will see a Preferences button at the bottom of the interface. Click on that and you can choose how to diplay the 'new page' whenever you open up a new document.

Similar Messages

Clicking "page from template" does not allow me create new pages

I stared designing a site with the trial version of CS4. Of course it involved a lot of trial and error, creating a page and canceling it again etc. At last I was able to design the index page and a few other pages, but suddenly just about 7 days into the trial period, the template started looking different; not displaying the images and displaying the home page article in an improper way. I also discovered that I could not create new pages by selecting file\new. When the new document dialogue page opens and I select "page from template" and then select a site I am working on, nothing shows in the items list. I only see the message "no items". Moreover, the "create" (new page) button is no more a click-able area.
I even tried it by proceeding as if I wanted to design a new site. I click file\new\page from template\the site, but when it comes to the stage where I should select "2 column liquid, left sidebar, header and footer" after clicking “page from template” I don't see anything in the items column. It only tells me "no item."
I thought this problem was due to the fact that I was using the trial version and that the trial version was limited in the number of new pages I could create. So I bought the full version. Alas! I discovered that changed nothing. Right now am stuck. Do you have any suggestion?

I think you're are confusing DW Templates with CSS Page Designs and Starter Pages.
Templates are a DW proprietary device. They permit you to have sitewide elements such as common menus, headers and footers on all your pages along with Editable Regions for page specific content (i.e. the stuff that changes on every page).
DW Templates looks like this (notice the Template Editable Comments):
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />

<title>Untitled Document</title>



</head>
<body>
My Page Specific Content Goes here

</body>
</html>
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Can not create new page from template

I have been working on a new site for the last couple of
weeks and have created several pages using a basic template.
All of the child pages of this template still update when
changes are made to it, however I can no long create new children
from this template.
Any ideas as to what the problem might be.
THanks
Clint

> It is basically just creating a copy of my template, and
not linking to it in
> any way.
> This allows me to change any section of the html.
my guess is that you are opening the .dwt template file and
doing a "Save
As". That page is not a "child" page of the template.
>
> I want to be able to create new pages off this template
and have it work like
> all of the first pages I created.
dw menu-->File-->New
in the new files dialog box, click the Templates tab
from list in left, click This Site Name
from list in right, pick This Template
make sure x is in box to Update if template changes
click okay
save file with filename you want to within this local site
folder.
add content to within the editable areas
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Create new page from template

I created a page, and saved it as a template. I want to
create a new page from the template (creating more pages for the
same website). When I select file > new > page from template,
the list contains <no sites>.
How do I get the page and / or template I already created to
be in a "site" so it shows up on the list. Couldn't find this in
the help file.
Thanks

So where is the correct location?
I created the folder for this site when I first created the
html page. This is the folder I mentioned. This site folder was
created inside the Documents folder, I believe by default.
As I mentioned, on the first try, I just let it save the
template to this same site folder, which is what it suggested by
default, and it has been there ever since.
I only created my own "templates" folder as an experiment
after your first suggestion. I have now renamed it "Templates"
(upper case T) and the template is still not found with File >
New> Page from Template.
Sorry I am not sure if I understand exactly what you mean by
"A folder in the root of the "local site folder"". Is this the same
as or different from the site folder I created and saved the html,
css, and image files to? (which is in Documents) If different,
where can I find it?
I searched my system for ALL folders named Templates, and
found none that I believe could be associated with DW. Is this in
appdata or hidden location?
Many Thanks

Infinite loop creating new page due to column header overflow.

i am getting an error and some pages "Infinite loop creating new page due to column header overflow. " --
using report builder 9, i have a fairly simple report - that contains 4 subreports.
for some pages i get the error - it seems if there is more data than would fit on 1 page.
smaller pages work fine.
the subreports are all simple queries and dumps....
containing page header, column header, detail sections.
page header has just a text bar of the name of the section.
column header has the field names
detail section has the data - 1 row for each row in the recordset.
nothing i do seems to change getting "Infinite loop creating new page due to column header overflow. " on a page with more than 15-20 records returned.
any ideas would be appreciated.

Try these links if you are still having the issue:
http://community.jaspersoft.com/questions/543302/receive-infinite-loop-creating-new-page-d ue-column-header-overflow-exception
http://community.jaspersoft.com/questions/500177/infinite-loop-due-page-header-overflow

How do I make it so my client can edit Links in business catalyst when they create new pages?

Okay so essentially I have built a site in Muse uploaded to business catalyst and I've setup a site template so that the client can create new pages as each new course arrives, but how do I get the link from the homepage to link to the new page? basically I need the link to be editable.
What would be ideal is a kind of portfolio layout where there is a thumbnail and a new page but for my client to be able to add a new project adn it would create a thumbnail on the homepage and a new page that he can edit. Does anyone know of something like that possible in Business catalyst?

Hi
Editing with Business Catalyst only works with image or text editing , we cannot add new page or page items using in browser editing.
However, you can manage the site from BC end when your client and login to admin and add pages, modify etc, but if you re-publish the site from Muse then then changes will be overwritten.
Thanks,
Sanjit

How to create new Page Format

Hello
i want to create new page format in sap script
can any body guide to crate this & how to assign this
thnks in advance

Hi Nitin,
You can create a new page format by transaction code SPAD. Here you will have to create a cutomised page format for ex: 'ZPAGE'.
After this you will have to create a format type 'ZPAGE'. Assign the page format 'ZPAGE' to format type 'ZPAGE'. Pls make sure that both the names are identical.
Once you do that you will have to assign the format type ZPAGE to the printer which you want to use.
Now you can use this page format in your script.
Hope this helps.
Sushil

Use a Custom Page Layout When Creating [[new pages]] in Enterprise Wiki

I have followed a few different blogs and I've been able to create a custom wiki content type and create a new page layout based off of that content type. I've also set my site so that my new layout is the default page layout. This works when creating
new pages on the site but when i try to create a new wiki page --> [[new page]], I'm still getting the typical blank wiki template. How on earth do i get my page layout to sync with creating a new wiki page?

Hi,
For your issue, go to Site Actions > Site Settings > Page layouts and site templates (Under Look and Feel).
Pages in this site can only use the following layouts: add custom wiki template.
Select default page layout: choose custom wiki template.
Besides, here is a blog, you can use as a reference:
http://blog.henryong.com/2010/06/08/how-to-create-custom-sharepoint-2010-page-layouts-using-sharepoint-designer-2010/
Best Regards,
Lisa Chen

Creating new pages in iWeb

Could someone assist please with creating new pages within a page - that is if I need to follow from
a previous page with in context stuff, but I don't want a NEW page with a NEW page heading at the top.
I just want to put more stuff up under an existing page heading and using an arrow to go to new page
all in the same section. Rather than filling the top with new page headings. Sorry if I cant explain it better! Thanks - Gareth

This works for your site because it is mostly photos and you have used the Photo Page, fine. However, what you need to remember is that many people just have ordinary websites without photos who might still want to use sub pages and this method will not work for them because there are not forward and back links.
I have sub pages on my own website and basically, I created an About Us page. I have some text there, but then I have something that says find out more about these people. I did not want these other pages displayed in the main nav bar, so I took them all out and what I have done on the About Us page is use a shape with the name of the person in it and created a hyperlink to that page. You click on the relevant shape and this takes you to the page for that person - on this page I have then created a shape with Back and Forward in it - the Back hyperlink if clicked on takes you back to the About Us page and the Forward hyperlink takes you to the page for the next person etc.
If you want to create sub pages on an ordinary web site, then this is how you need to do it - you need the links on the pages that are not in the main nav bar to be able to get around the site.
You don't have those links on your site, but as it is mainly photos then this does not matter and works for you, as you go from gallery to gallery. This will not work for everyone though - horses for courses! What works for one might not work for another.

Can't get Contribute to Create New Page

Can't get Contribute to Create New Page
--Have 'tried' all options for 'new page' - button, File>,
and Ctl + N
--Have tried via each of my different websites
--CAN Edit existing pages!
--Established myself as Administrator, and Publisher
--Downloaded "Update" & ran "Repair" option
STILL Can't open a "New Page"!!!???!!!
Can anyone help?

I don't suppose you ever found an answer to this problem?
I've got exactly the same on a laptop: Desktop is absolutely
fine.
As in your case the software works 100%, but you simply can't
create a new page (across all sites). Crazy - no error message, no
nothing.
I did make the fatal error of installing a demo version of
the software before buying the real software, so I did have to go
through 6 pages of A4 instructions to try to get the read software
to install... perhaps this is a vestige of that???

I can't delete, move or create new pages.

Hello,
I have catalogue (390 pages)
Today i cant delete, move or create new pages.
When i delete, move or create new pages - my Indesign CS5.5 program "freezes"
Only with CTR: + ALT + SHIFT i can stopped my program.
Аfter reopening everything was as before!
I try to export like a *.idml file, but my program crashes! Every time!
My OS is: Windows 7
Indesign CS5.5
Please help me
Thank you!
With kind regards,
Botev Plovdiv

Is there anything at all related to this freeze in the Windows Event Viewer?
Are you able to add, remove, or move pages in a new document? Are you able to export a new document to .idml?
Yes, it is able!
It sounds like there may be a corrupt bit of text, or an image in the file. It may be possible to isolate a page, and then an object, using "Divide and Conquer."
Start with a copy of the file, for safety. Try to export the front half and the back half separately. If either half crashes, divide it in half aand try to export those halves. Repeat the process until you have isolated a page that crashes. Now remove half the objects from that page and try to export. If it works, put those back and remove the other half and try again. Repeat as above until you isolate an object.
Thank you, I will try!
After that i will back to you with my comments!
Thank you again, Peter!

How to create new page in adobe form.

how to create new page in adobe form.

Hi
First Go To Layout.
On Hicherchy Platte , rightclick on Subform and select option new body page.
This way you can create body page for the particular subform.
if you want to create master page , right click on page 1 and select New master page.
Hope this will helpful to you.
Rewards if useful.
With Regards
Nikunj Shah

Tcode for creating new page size in smart forms

dear friends ,
can any one tell me the tcode for creating new page size in smart forms.
thanks&regards
veerachamy

page formats?
check in SPAD.
Regards
Prabh

I have a site published that i need to change, but when i publish the new pages it dosen't change the site that's already published. How do i remove the old site?

I have a site published that i need to change, but when i publish the new pages it dosen't change the old site.

See if this helps you any further :
The concept of Sites in iWeb
Also, clear the browser cache and reload the page(s).

How to create new page from EBS

Hi
I want to create new page through EBS
is that possible
and
how?

HI
Now page is run successfully
but when it opens then It gives an error like:
Exception Details. >oracle.apps.fnd.framework.OAException: Application: ICX, Message Name: Could not find the specified responsibility.
     at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source)
     at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source)
     at runregion.jspService(_runregion.java:132)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)

Changing default code in HTML "Create New" page for CS3

Similar Messages

Maybe you are looking for