Changing default Target Group when creating transports.

Hi All,
We have 4 different target groups for the transports created in development systems. I would like to make one transport group default which is mainly used by majority of consultants.
How to make one transport group default during creation of transport.
Regards,
Krishna

And to just make it more clear :
and here is the SAP help on the subject:
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
Best regards,
Menelaos

Similar Messages

  • How to add default associated groups when creating new site

    Hi All,
    I am trying to create a new subsite in sharepoint 2013 using CSOM (code is mentioned below). But no default groups (MEMBER, VISITOR, OWNER) are getting created in that site. When we try through UI we will got through a page "Set Up Groups
    for this Site" where we can specify these details.. Is it possible to do the same (creating default groups together with the site creation) through CSOM or powershell.
    CSOM code:
    WebCreationInformation creation = new WebCreationInformation();
                creation.Url = "NewSubSite6";
                creation.Title = "NewSubSite6";
                creation.UseSamePermissionsAsParentSite = false;
                Web newWeb = clientContext.Web.Webs.Add(creation);
                //clientContext.Load(newWeb);
                clientContext.ExecuteQuery();
    Regards,
    Shahabas

    Shahbas, here is the code:
    private static void SetSecurityOnSubSite(ClientContext clientContext, ListItem item, bool confidential, Web newWeb)
                try
                    if (confidential)
                        newWeb.BreakRoleInheritance(false, false);
                        clientContext.ExecuteQuery();
                        Group ownerGroup = default(Group); Group memberGroup = default(Group); Group visitorGroup = default(Group);
                        // web has unique permissions, so create default assosiated groups (owners, members, visitors)
                        if (!newWeb.GroupExists(newWeb.Title + " Owners"))
                            ownerGroup = newWeb.AddGroup(newWeb.Title + " Owners", "", true);
                            clientContext.Load(ownerGroup);
                        if (!newWeb.GroupExists(newWeb.Title + " Members"))
                            memberGroup = newWeb.AddGroup(newWeb.Title + " Members", "", false);
                            clientContext.Load(memberGroup);
                        if (!newWeb.GroupExists(newWeb.Title + " Visitors"))
                            visitorGroup = newWeb.AddGroup(newWeb.Title + " Visitors", "", false);
                            clientContext.Load(visitorGroup);
                        // executequery in order to load the groups if not null
                        clientContext.ExecuteQuery();
                        newWeb.AssociateDefaultGroups(ownerGroup, memberGroup, visitorGroup);
                        newWeb.AddPermissionLevelToGroup(newWeb.Title + " Owners", RoleType.Administrator);
                        newWeb.AddPermissionLevelToGroup(newWeb.Title + " Members", RoleType.Contributor);
                        newWeb.AddPermissionLevelToGroup(newWeb.Title + " Visitors", RoleType.Reader);
                        FieldUserValue userValueCreatedBy = item[Constants.Projects.CreatedBy] as FieldUserValue;
                        User createdByUser = clientContext.Web.EnsureUser(userValueCreatedBy.LookupValue);
                        clientContext.Load(createdByUser);
                        clientContext.ExecuteQuery();
                        UserCreationInformation createdByUserCI = new UserCreationInformation();
                        createdByUserCI.LoginName = createdByUser.LoginName;
                        ownerGroup.Users.Add(createdByUserCI);
                        clientContext.ExecuteQuery();
                        foreach (FieldUserValue userValue in item[Constants.Projects.ProjectTeam] as FieldUserValue[])
                            User user = clientContext.Web.EnsureUser(userValue.LookupValue);
                            clientContext.Load(user);
                            clientContext.ExecuteQuery();
                            UserCreationInformation userCI = new UserCreationInformation();
                            userCI.LoginName = user.LoginName;
                            memberGroup.Users.Add(userCI);
                        clientContext.ExecuteQuery();
                catch (Exception)
                    throw;
    Reference link: 
    http://sharepoint.stackexchange.com/questions/116682/how-to-create-a-group-in-a-subweb-using-csom
    Thanks, Pratik Shah

  • Need to change the targeting group of a Rule or monitor after a alert is created.

    Hi All,
    I have created many alerts and they are working fine. Currently due to business requirement we have installed Windows server 2012 operating systems in our production environment. But we have targeted the
    "Windows server 2008 r2 full operation system" group as per the below screen shot. As we now have to import the management pack for Windows server 2012 as well.
    What we have planned is to change the targeting group from "Windows server 2008 r2 full operation system"
    to "Windows server operating system group" so the alert / monitor or rule will target all windows server which has been discovered in SCOM rather that only the servers running Windows server 2008 r2.
    I was also not able to set overrides for this as that server was not coming under Windows server 2008 r2 full operation system as it was a Windows server 2012 agent.
    I can also go ahead and create new alerts but i have created custom of 1000 alerts and i cannot go ahead and re create them.
    Is there any way to change them. If yes Can i do a bulk change via powershell ?
    Below is the screenshot of what i really want. Can any on e please help.
    Gautam.75801

    You can't really change the target class of a monitor in a sealed vendor pack. If this is your own custom pack, then you can change the target class no problem, but this would need to be done on the unsealed XML (using VSAE or some other authoring tool).
    Then you can seal the pack and re-import (should be upgrade compatible, since you are just changing the target).
    I'm not familiar with this particular monitor in your screenshot, but it looks like this should probably target Exchange? If this is the case, then I would recommend targeting the closest typed class that the monitor should run against. In this case, some
    type of Exchange class that is already in the Exchange management pack.
    Otherwise, you can also create your own custom class for targeting, which I describe in detail on my blog.
    Here are all my sample VSAE fragments.
    Here is an example of
    using the Application Component base for your new class.
    Here is an example of
    using Local Application base for your new class.
    Jonathan Almquist | SCOMskills, LLC (http://scomskills.com)

  • How to achieve the project is obligatory entry when creating transport requ

    Hello
    How to achieve the project is obligatory entry when creating transport request

    In T-code SE03, under Administration -> Display/Change Request Attributes
    Select "SAP_CTS_PROJECT" and hit the change button and then change the value of "Default for All Clients" to Mandatory
    Hope this helps.
    Thanks,
    Naveed

  • Vehicle Scheduling Error:Error when creating transport structures in live C

    HI Gurus,
    We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
    : Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
    My planning horizon is for 90 days from current date and demand horizon is for 30 days.
    I have checked the VS profile and i dont find any problem with profile.
    Can you please help me in finding what exaclty went wrong
    Thanks,
    AMol

    Try This..
    1. Open the crystal client on your local machine and import that particular report.
    2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
    3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
    Let us know.

  • Project Server 2010: PWA Removing Default Project Site Security Groups When Creating a New Project

    I looked for this specific issue with Project Server 2010/PWA/SharePoint and could not find an exact answer... hopefully someone can help.
    We are currently using Project Server 2010 and have a number of project site templates that are used dependent upon the enterprise project type selected. Each of these project site templates have unique permissions which should create the default security
    groups on the project site upon publishing/syncing:
    <Project Name> Members
    <Project Name> Owners
    <Project Name> Visitors
    <Project Name> Project Managers (Project Web App Synchronized)
    <Project Name> Team Members (Project Web App Synchronized)
    Web Administrators (Project Web App Synchronized)
    Whether a user creates a project through PWA or Project Pro 2010 and imports the project into PWA, we get a weird result in the Site Permissions of the newly created project site. PWA will remove all default security groups from the project site template
    and add a whole list of users in the Site Permissions list without groups. 
    Once the project is published and the project site is created, we can then go back and add those default security groups back in the project Site Permissions and even add a couple of custom groups without them being removed on all subsequent project syncs
    or publishing. 
    How do we get PWA to not overwrite the project site templates' security groups and place each user in the proper default security groups? At the same time, how is PWA adding a number of users into the Project Site Permissions?
    Thanks in advance.

    Paul,
    Thanks for that information. Right now we are using the Test environment to turn the Auto-sync feature back on. I suspect that the reason this is happening is due to PWA groups/categories/security templates. There may be more than one PWA group that is "overwriting"
    the default project site groups upon initial creation of the project. We will look further into the security settings to tighten up the policies. 

  • Changing default target namespace for a JPD

    Hi,
    Is there a way in Workshop 8.1 to change the target namespace used when a WSDL
    is generated from a JPD? Currently, Workshop uses http://www.openuri.org. I
    have tried to use the @common:target-namespace annotation in my JPD, but that
    appears to only be valid for JWS files. Is there a way to globally set the default
    target namespace for an entire Workshop project?
    Thanks,
    Nick

    And to just make it more clear :
    and here is the SAP help on the subject:
    Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport layer.
    The transport layer determines whether objects are assigned to a local or transportable change request.
    Use
    Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System and transport layer.
    When you create a package, it is assigned the standard transport layer of the SAP System.
    If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
    The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
    If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
    If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
    Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
    It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
    To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
    Only the system adminstrator can make changes.
    Caution:
    The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
    Best regards,
    Menelaos

  • Chang default account group forwarding agents

    Folks,
    During shipment creation and change the default account group is set to 0005 when searching for an agent and if I remember well, this could be changed in customizing. Cant remember where.
    Anyone?
    MZ

    MZ,
    There is no customizing for this purpose.
    The default account group '0005' is fixed in the search help assigned to this screen (F4_CARRIERS).
    To change this you should create a new search help and assign it to the screen (ABAP development). An access key will be necessary to change the screen attributes.
    Regards,
    Aldo.

  • Change Default purchasing group in requisition

    Hi,
    I have a purhcasing group X populated  from info record while creating the requisitions using ME51N.
    When i try to overwrite the default purchasing group with new purchasing group, systme does not allow.
    System doesnot allow to change the default purcasing group.
    How can i get rid of this ??

    I do not get any error . If in place of original purchasing group (which is defaulted from Info record) , i write new purchasing group then while saving system again changes it back to the original purchasing group.
    I should be able to change the pur. group as i want. But system doens't allow that.
    What can be the reason ??

  • Can't adjust the default time scale when creating a new appointment in Outlook 2010

    Good Afternoon, I have found a question on these community boards that propose an issue that I am currently experiencing. The answer; however, was not the solution for me. I used the same name as the original post and will add the original text as it is
    exactly what I am experiencing.
    "When creating a new appointment in the month view Outlook 2010, the default time scale or duration is 2 days.  I tried resetting the view, adjusting the time scale, and creating a new profile.  It only seems to happen when creating the appointment
    in the Month view.  ???  Day and week view work fine and appointment can be created w the standard 30 minute time scale.  But the time scale in the month view although says 30 mins, it creates appointments in 2 day durations."
    This is exactly what happens to the user I am assisting. When in "month view" double clicking the day will bring up a new appointment with the times within the same day. If you click the "new appointment" button in the ribbon it
    sets the end time to the following day. This only happens in the month view every other view works as it normally should. I have tried it several times being sure multiple days are not selected. It still gives me an end time for the following day. I have reset
    the view, changed the time scale but nothing seems to bring it back to the default same day appointment. Any ideas?
    Thanks for any assistance you can provide.

    It is a default in Outlook 2010 in month view.  The "time scale" selection is greyed out.  Very frustrating.  Everytime I select "New Appointment," a duration of 1 day is automatically selected; midnight to midnight.  I end up doing
    most appointments twice because I forget to change to end date back to the day of the appointment.  "New meeting Request" works fine.  So does "New All Day Event" when you deselect "All Day Event."  I can't see how this default behavior
    provides optimal results under any circumstances.  Very frustrating.

  • [Solved] Change default leaf background when unlocking screen in Gnome

    This is kinda silly, but how do I change the default desktop background when unlocking screen in gnome?, its always that annoying green leaf background, how can I make it my wallpaper instead?
    Last edited by daf666 (2009-06-13 12:35:29)

    See the Gnome_Tips wiki article which contains the answer to this and other questions
    Change the Default Background Image
    The default background is that zoomed in picture of a green leaf. It appears for newly created users, but more importantly, this is the image shown when the screen is locked. As of 25-Apr-2009, you can find this image here
    /usr/share/pixmaps/backgrounds/gnome/background-default.jpg
    To change it, simply copy your favorite image to this locate (as root) and rename it.

  • Changing default color scheme when exporting ALV report to Excel spreadshee

    Hi all,
    We have a bunch of FI reports created using OOPS in abap.  Each of the reports has the functionality to be exported to an excel spreadsheet.  When exporting to Excel, the headers are a very dark brown color, making them difficult to read and it has been requested that they are shaded a lighter color.  I have not defined any sort of color scheme within the report itself, and I was wondering if there was a way to change the color scheme when exporting the report to excel.  Let me know if there is anything that can be done, thanks!

    check ur fcat

  • How to create/assigh Target Group while creating Marketing Plan in CRM 6.0

    Hi all,
    I am new to this field  and would like to know that how can we assign the Target Group ( business Partners ) in the Campaign while creating a Marketing plan.
    It will be really handy for me if I get the detail steps to execute.
    Regards,
    Zen

    Hi,
    perhaps this can help you:
    http://help.sap.com/saphelp_crm60/helpdata/en/32/ad6f422f91c153e10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_crm60/helpdata/en/46/0abec5abb314dce10000000a155369/frameset.htm
    This describes step by step what you have to do to create a marketing plan / campaign.
    Regards,
    Claudia

  • Error when creating transport request in 000 clinet

    Hi All,
    I am getting the below message when creating a transport request manually in 000 client
    Requests can only be created from ChaRM!
    Message no. 38001
    How can I deactivate charm for short time and then activate it again?
    Please let me know your suggestion.
    Thanks
    Amair

    Hi Sanjai,
    Thanks for the quick response.
    But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
    Thanks again
    Amair

  • Change name of publishedcollection when creating or editing

    I need to change the name of the publishcollection when the collection is created or edited. This is to make sure the collection name matchs the name of the one on the remote server. I have tried the following code and it executes ok, but in the end the name of the collection is not changed.
    here is the code
    function publishServiceProvider.updateCollectionSettings( publishSettings, info )      
        local colname = "This is my new collection name"
        LrLibLogger.outputToLog( colname )
        catalog:withWriteAccessDo( "Set name", function ()
            info.publishedCollection:setName( colname )
            LrLibLogger.outputToLog(info.publishedCollection:getName()) -- outputs the old name and not the new one
        end)  
    end
    After running this the collection name is still the old one.

    Hi Allen,
    I've tested your second version of your code, and although I can't find why the name isn't fixed, I get an error, only when creating a new collection:
    "We can only wait from within a task"
    I found this at the Adobe documentation for pubCollection:getName():
    "This function must be called from within an asynchronous task started using LrTasks. Must not be called from within the same catalog:with___WriteAccessDo gate in which the collection object was created."
    I'm very new to Lua and LR development, but I hope this helps.
    Regards,
    Juanma

Maybe you are looking for

  • No calendar change for a single event in a recurrring string of events

    Why won't iCal allow me to change the calendar for a single event in a string of recurring events? Why am I not allowed this, but can change other details and even get prompted whether I want these changes to take effect over the single event or all

  • How do i connect my iMac to my tv to see movies with wire

    how do i connect my iMac to my tv to see movies with wire

  • Acrobat Pro trial expired PLEASE HELP,

    Hello everyone I down loaded the acrobat pro trial but did not install it, I lent my laptop to a friend who installed it and and now I wanted to give it a try but the trial has already expired. Is there any way I can get the trial again to test out?

  • ICal- Inspector font is 17pt and too large

    In fact the type goes out of view on the right. How do I change it to a reasonable size like 12pt. The type size in the calendar part does change size by command + or -. I open font window by Control>Font and see it's Helvetica 17pt and can't change

  • Agentry Client on Windows Surface

    Hi Experts, We wanted to run the Service Manager App in Windows Surface Pro 3. I have installed the WPF Client in the surface but I am not able to run it. I used the same client that was used in the laptop ( using Windows 7 ). I could not find any Se