Changing default target namespace for a JPD

Hi,
Is there a way in Workshop 8.1 to change the target namespace used when a WSDL
is generated from a JPD? Currently, Workshop uses http://www.openuri.org. I
have tried to use the @common:target-namespace annotation in my JPD, but that
appears to only be valid for JWS files. Is there a way to globally set the default
target namespace for an entire Workshop project?
Thanks,
Nick

And to just make it more clear :
and here is the SAP help on the subject:
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
Best regards,
Menelaos

Similar Messages

Problem when changing the target quantity for a contract

Hello,
I have a problem when i try to change the target quantity for a contract through the BAPI 'BAPI_CONTRACT_CHANGE'.
I filled the tables 'item' and 'itemx' with new values. the BAPI 'BAPI_CONTRACT_CHANGE' returns no error, but after using the BAPI 'BAPI_TRANSACTION_COMMIT' I get an info message from SAP and the modification does not pass.
In debugger I could locate the error. In fact, the appeal of FM 'ME_UPDATE_DOCUMENT is done with a table XEKKN with the new values of the quantity and a KZ code equal to ' I ' to insert, then it must have the value ' U 'for update .
Is someone can help me to solve this problem?
Thank you in advance.

Have you tried selecting the page, and then changing the theme directly on that page?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

Changing default Target Group when creating transports.

Hi All,
We have 4 different target groups for the transports created in development systems. I would like to make one transport group default which is mainly used by majority of consultants.
How to make one transport group default during creation of transport.
Regards,
Krishna

And to just make it more clear :
and here is the SAP help on the subject:
Transport Layer in ABAP Workbench
The Change and Transport System supports the distribution of development work on large projects across multiple SAP Systems.
The packages in each development system are grouped into one transport layer.
The transport layer determines whether objects are assigned to a local or transportable change request.
Use
Each of your SAP development systems is assigned a transport layer as its standard transport layer. If you use Extended Transport Control, you can assign different standard transport layers to certain clients.
You can define at the most one consolidation target for each SAP System and transport layer.
When you create a package, it is assigned the standard transport layer of the SAP System.
If you want to assign a different transport layer to a package, you require the administration authorization for the Change and Transport System.
The objects in a package automatically have the transport attributes defined for the corresponding transport layer.
If a consolidation route originating in their SAP System is defined, then the objects are assigned to a transportable request, and transported into the consolidation target when it is released.
If a consolidation route is not defined, the objects are assigned to a local request, and are not transported.
Customizing settings are not assigned to a package. They have the transport attributes of the standard transport layer of the system or client.
It is best to assign a package a standard transport layer for which a consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of Release 4.0A and cannot be maintained.
Best regards,
Menelaos

Changing default page margins for Web Intelligence

Is it possible to change the default page margins for new Web Intelligence documents. The default size is 76px which most people find exceedingly large.
The defaultconfig.xml file can be modified to specify default fonts, page size, orientation, etc. Can anything be done to this file to change the default page margins as well?
Any help would be appreciated ...
Thanks

Hi James,
Following information might be helpful for answering your queries.
An ER has already been raised for the functionality yo want and the ER# Id is ADAPT01081135
State
Submitted
Origin
Customer
Date Entered
2008-05-23 12:29:54
Subject
XIR2: Webi: Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Current Functionality
The default 'Page Layout Margins' are set to 76px each for a new Webi report.
Create a new Webi report - Go to Page Properties - Page layout - By default, Top margin=76px, Bottom margin=76px, Left margin=76px, Right margin=76px.
Requested Functionality
Wanted to set the default 'Page Layout Margins' to 0px instead of 76px each.
Expected Added Value
There should be an option in Webi / Infoview to set any property value to any required default value. This should be independent of the user, because it may differ from user to user.
Found In Product
Business Objects Enterprise.
Found In Product Version
XIR2.
Found In PFA
Web Intelligence
B) use SDK kit (this is only a suggestion though)
https://www.sdn.sap.com/irj/sdn/businessobjects-sdklibrary
https://boc.sdn.sap.com/codesamples
You would find almost everything here that BusinessObjects supports (about the SDKu2019s). You could also use the forums to check if anybody have already done what you are looking for)
Regards,
Sarbhjeet Kaur

Changing default refresh time for the UWL.

Hello,
I am trying to change the Default refresh time for the UWL(workflow inbox) for all the users before they personalize or save the refresh time, Would changing the refresh time in the .xml file work or is there any other way to do it? Thanks,
Aniketh R.

We have had all sorts of issues with this as well. I have been unable to find a solution that works as of yet. From my own debugging it seems as if RP is trying to parse the pasted text as logo's, fields etc.... I am looking at potentially using a script w/ set interval to "clean" the clipboard data but this isn't a perfect solution for numerous reasons.
What is happening to your letters when the users paste? Our letters actually become unusable after a plugin save. So I am actually very interested in the answer to this question!

Change default port number for web logic!

Hi folks,
In my scenario, i already installed obiee 11g with simple install along with web logic on windows xp machine.where this will creates default port number for all services. now i want to change default port number of web logic that is 7001 to some to other port number. how to change this ??.plss help me asap.
regards,
mahesh

Refer tohttp://www.oracle.com/technology/documentation/1012_solaris/install.1012/install/ports.htm

How to change default audio device for gnome?

My laptop has an integrated sound card, but I lately got a USB headset (headphones+mic, which works with linux btw, I tested it with GizmoProject which lets me choose which /dev/dspXX I want): http://www.geeks.com/details.asp?invtid=U200&cpc=SCH
So, how do I change the default audio device for *all* desktop sounds to the headphones? I tried the two gnome sound properties, and when I select the headset device they let me configure it but ALSA still uses the internal audio card. Why isn't there a way to easily select which device you want for your sounds as there is for BeOS, Windows and OSX?

Eugenia wrote:Well, it's still not good enough.
We can't satisfy everyone. What you want is a corner case. For most people ALSA and dmix works appropriately, and that is what esd uses by default. We cannot document and automate every configuration possible. That's up to the users.
However, if you don't want to restart gnome, try the below... I make a few assumptions, but even if they're wrong, they're hardly difficult to work around.
Just copy the /etc/esd.conf to ~/.esd.conf, make your change, then do killall esd. Presumably gnome will restart esd, and it ought to read your local config. If it doesnt, start it yourself.
Feel free to write a script that automates this, or document it on the wiki.
I have to restart Gnome to get this thing working. Other OSes *automatically* can use an alternative device. But if I change ESD, I will have to restart Gnome, no?
Well, if you try my suggestion above, no. You can restart esd yourself. And that's what all the other distros do, except with some fancy GUI.
James

Change default video player for iPad

Is there any way to change the default video player for iPad?
For instance, to be able to see mpeg, mkv videos, etc.

Did you figure out how to do it ? I have some movies copied over from a NAS into FileExplorer app on my ipad, but it uses quick time as player and it does a lousy job with mkv files.
Note: Jailbreaking is not an option

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

How to change Default document size for CC Library Graphics (InDesign)

Good morning --
I have just discovered the amazing uses of the CC Library setup in InDesign and would love to be able to use it as a tool to collaborate template galleries amongst coworkers.
I work in an industry that offers many different templates for our Marketing pieces available to the sales team. What we have in place right now is about 50+ different templates in their own packaged files. Now, this isn't all that difficult to maneuver around, but the CC Library has made it so I can "drag and drop" templates into place. This drag & drop feature is easy enough for me to grasp, and with the proper training it should be with the rest of the team (should being the keyword). However, in some cases if you double-click on Library graphic it opens the file in it's own editable file with a custom document size of 8.5x11 Portrait (which I imagine to be the internal InDesign preset).
My questions therefore are when I double click on the library "Graphics" can the document size be anything other than 8.5x11? Can each Graphic have it's own document preset?
- If I open a file that is set for landscape, all of the "Graphic" falls off of the spread.
- Some "eblasts" are much longer than 8.5x11 (sometimes as much as 8.5x20), thus knocking some of the "Graphics" into that weird space area.
Please let me know if I am not being a clear enough.
Thank you!
Steve

@Steve – you are totally clear what you are doing and what you like to do.
But I fear an automatic setting that is creating the page size according to an asset's size does not exist right now.
I can change the size of a new document beforehand, if no document is open and create a new size in the document's properties dialog with the keyboard shortcut alt + cmd + p (in my German InDesign on Mac OSX 10.7.5). But you have to know in advance what size that should be.
Example: If I chose A3 instead of A4 (my default) when no document is open and double click an asset in a CC Library the asset will be placed in a one page document sized A3.
1. Changing the size (no document is open) in my German UI of InDesign CC-2014.2:
2. Double click and the result is according to the settings I made:
Uwe

Changing Default Print Quality for Photosmart Printers in Stand Alone mode

Hello Everyone. I am using a group of Photosmart Printers in Stand Alone mode for events where I shoot and print on site. Although I have quite a few printers with me (6 total at a time), I prefer to have the printers print in "Normal" Print Quality Mode, instead of "Best". Images come out twice as fast, and because I have a disciplined shooting technique, I get "GREAT" results from the "Normal" setting. I and/or my assistant have to go to my "Preferences" to change my Print Quality everytime we prepare to print another batch of photos. Sometimes we have groups that will want 5 copies, and it simply takes FOREVER in Best mode, and really, although with a 5x Loupe I can tell the difference, My customers can't with their naked eye. Sometimes we forget to change the setting due to the pressure of the pace sometimes. OOPS!
I am using the following Photosmart Printers: A516, A512v and the 335.
As I stated, I don't use these with a computer, I drive them straight from CF Cards. I do have all the original software, if I need to use the computer to make some changes. Just tell me how. Manual says nothing about getting the setting to default to normal.
Thank you so very much in advance.
BLAYZE!

Hello:
One way of assuring high quality would be to export the photo to the desktop (at highest quality) and then print from there.
In my own case, I find that when I occasionally print a photo from iPhoto, the quality is quite good.
Barry

How to change default action "alarm" for all signatures ?

My question belongs to a Cisco 1712 (128 MB, IOS 12.3T, SDM 2.5 installed):
I'm trying to change the default action "alarm" to "alarm,reset,drop" for all signatures of my custom set.
However doing so via SDM fails. First, it appears as being done correctly, but after compiling the signatures again, the default values are back there (in the same sense, I was unable to delete signatures, works just using the CLI).
I followed the instructions at cisco.com:
router(config)#ip ips signature-definition
router(config-sigdef)#signature 6130 10
router(config-sigdef-sig)#engine
router(config-sigdef-sig-engine)#event-action produce-alert
router(config-sigdef-sig-engine)#event-action deny-packet-inline
router(config-sigdef-sig-engine)#event-action reset-tcp-connection
router(config-sigdef-sig-engine)#exit
However ip ips signature-definition is not understood by the router, so the procedure fails.
Can you please assist me ?

You can use IOS command-line interface (CLI) to change signature actions for one signature or a group of signatures based on signature categories. The following example shows how to change signature action to alert, drop and reset for signature 6130 with subsig ID of 10.
router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
router(config)#ip ips signature-definition
router(config-sigdef)#signature 6130 10
router(config-sigdef-sig)#engine
router(config-sigdef-sig-engine)#event-action produce-alert
router(config-sigdef-sig-engine)#event-action deny-packet-inline
router(config-sigdef-sig-engine)#event-action reset-tcp-connection
router(config-sigdef-sig-engine)#exit
router(config-sigdef-sig)#exit
router(config-sigdef)#exit
Do you want to accept these changes? [confirm]y
router(config)#

How to Change Default Iview Properties for Role Upload?

Hello,
We have many roles to upload from R/3 ABAp system to NW2004s EP.
We use the Role Upload tool in the Portal to achieve this.
It works fine, the roles are created in the portal and can be assigned to users.
The fall back is that we have to modify every single transaction iview in the portal after the upload to modify the SAP GuiType from "SAP GUI for HTML" to "SAP GUI For Windows".
How can we change the default model used of SAP GuiType for uploading transaction iviews in uploaded roles?
Also, the uploaded role is not flaged as an "Entry Point", is there a way to set this marker to "Yes" as a default value for all uploaded roles?
Best regards.

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

Changing default open with for file type for all users

hello
can I change the default app to open a specific file type for all users and not juist for my user?
i am admin for my mac mini.
tnx
gil

What applications are offered for open with depends on the application itself informing the system it can open certain files, plus your own custom selections for opening files. Evidently the alternate app you want to use does not claim to be able to open the files you are assigning it. If you have a plist editor and know how to use it you could edit the info.plist file inside the application itself to add the file type you want to the application's declaration of file types it will open. Then restart so the system will read that declaration. I think it would be far easier to simply launch the application and then drop a file you want it to open onto its icon in the Dock.
Francine
Francine
Schwieder

Changing default target namespace for a JPD

Similar Messages

Maybe you are looking for