Changing font throughout a theme
Hi everyone...I have used iWeb to produce several pages for a website using the theme Layered Paper. Everything looked so nice and well-laid out...and then I checked it out on a Windows machine and found out that the font Hoefler Text (which iWeb uses as the standard font for the ENTIRE theme) is not on Windows machines, and just shows up as Times Roman. It looks terrible...the font causes lines to break wrong, it's a mess.
I don't want to start over with a new theme, because it's going to throw everything all off terribly when I change the theme. I don't want to just start clicking everything and putting shadows/rotating it 0.1 degrees, because if all of the text is turned into graphics (1) it won't be searchable...in my website and on Google; and (2) it will be slower for the pages to load.
I would like to just tell iWeb to make all of the theme work as the font Georgia instead of Hoefler Text, even if it takes some minor hacking. Can anyone help me out on this? I am sure there are others out there who are experiencing similar frustration and could use the tip as well.
As a side note, for the life of me I can't figure out WHY Apple would design entire themes for the web in fonts that aren't web-friendly fonts! Particularly when they have a list of "Web" fonts in the show fonts palette.
Thanks everyone,
dshillis
Thanks, this is a great workaround, even though it is a slight hack. Going to this link shows you a movie clip on how to do this, but basically what you're going to go is go into Applications/iWeb, Show Package Contents, go into Contents folder, then into Resources folder, and find the FontMapping.plist file. Open the file in a text editor (probably a good idea to make a copy of the original file 1st). This file bsaically tells your website via iWeb which fonts to substitutes for websites. So for instance, the first font listed is AmericanTypewriter, and under the Windows line it lists its substitute as Courier. If you change Courier to Courier New, for instance, it will display Courier New.
So I went into this file and edited all of the Hoefler Text entries to substitute for Georgia if a substitute was needed.
Thanks again!! Great tip!
David
Similar Messages
-
Changing Fonts Throughout a Presentation?
Hi everyone,
I import a lot of old presentations from Powerpoint and often want to change the Font type and size throughout the document. Is there a way to do this without having to edit each slide? Something like the "styles" tab in pages, I guess...
Thanks very much for your help!Thanks, this is a great workaround, even though it is a slight hack. Going to this link shows you a movie clip on how to do this, but basically what you're going to go is go into Applications/iWeb, Show Package Contents, go into Contents folder, then into Resources folder, and find the FontMapping.plist file. Open the file in a text editor (probably a good idea to make a copy of the original file 1st). This file bsaically tells your website via iWeb which fonts to substitutes for websites. So for instance, the first font listed is AmericanTypewriter, and under the Windows line it lists its substitute as Courier. If you change Courier to Courier New, for instance, it will display Courier New.
So I went into this file and edited all of the Hoefler Text entries to substitute for Georgia if a substitute was needed.
Thanks again!! Great tip!
David -
Can i change fonts or add them to my iphone
Hi, can I change the fonts my iphone uses or add things like emoticons etc?
You can't add fonts.
Change the fonts with what?
There is at least one app available via the app store for emoticons - Emoji, which is free. -
Hi guys
Is there any way I can change the text in the "title 1" or "title 2" field to make it smaller so it doesn't text wrap on me?bcap,
Here's a recent thread addressing a similar question.
http://discussions.apple.com/thread.jspa?threadID=606248&tstart=0
Matt -
IDVD crashing when attempting to change font in Theme
Hi, all:
I'm writing on behalf of my 13-year-old daughter, who with a friend used iMovie HD to make a movie for a school project, and then used iDVD '08 to burn that project to a disc. She's had to edit the movie a bit, and has shared the edited version with iDVD, but is now having a problem. Here's her exact e-mail to me (I'm in Europe right now; she's at home in the US)...
"hey i had to do a few touch ups to the movie that me and jill made, and every time a tried 2 share it 2 idvd, it worked, but when i tried 2 change the font on the themes thingy, it always said, "idvd has to close unexpectedly. we apologize for the inconvenience." or something like that that made me have 2 force quit it more than once. dont panic, the new version of the movie is still saved on imovie, but i dont know whats wrong with the other thing. please email me back ASAP! xoxo"
TIA for your help & suggestions!
Bill from CT (but in France)Just an additional thought to add to Glo H's excellent recommendation.....if your daughter sends her movie to iDVD and then needs to change anything in the movie, iDVD will recognize that something has changed and ask if it should update. And you think, nice, all is well. But, if you have chapter markers in the movie, iDVD will not 'update' properly. If you don't know this, you will see iDVD going ahead and encoding and burning, but the DVD disk will not play correctly. From the chapter marker nearest the change, all further chapter selections will default to that one.
I have had this happen three times now, and it has been with iDVD8. The previous version made the changes appropriately. The last time the only change I made was to change the spelling in a title! The other changes were to delete one song in an audio track and add another.
The only way to fix it was to create a new iDVD project and drop the movie in again.
I am using iMovie 6. Maybe iMovie 8 or 9 would be different. I just wanted to caution you. I know how difficult it can be to provide your kids with assistance from a distance. Mine used to call from college and it took at least 20 minutes just to figure out what they were doing......then I had to find the answer! -
How can i change the font for a theme in iDVD.
how can i change the font for a theme in iDVD. For example; the text of the rotation theme in the background of the movie. i want to change the font of the rotating text there. How do i do this?
Have a look at this: http://hints.macworld.com/article.php?story=20080130180258257
-
Does anyone know how to change a font in a theme in iMovie HD?
12 Powerbook G4 Mac OS X (10.4.7) 1.5gb ram 80gb diskScott,
You might experiment with creating themes without titles and then place your own titles over them.
Also, send feedback to apple to let them know of your frustration.
http://www.apple.com/feedback/imovie.html
Matt -
Change link font size through theme editor
Is it possible to change font size of link element using theme editor? I can't find corresponding parameter. Is it inherited from somewhere else?
Thanks in advance.Nadezhada,
If you want to change any font size of the text on Top level Navigation (top level tabs) or MasterHead(Masthead) then you can use theme editor.
But it wont work application level. For example if you want change the font size of a text in the a iView or any application, then you should look the possibility of changing that corresponding application.
Ram -
How do I change fonts in a Text field ??
Okay I've tried to implement a JComboBox that allows the user to change fonts in the text field. So far I've tried different methods to do it but to no avail. Could somebodoy here read the programs source code for me and tell me where I went wrong?
/* * My GUI Client */
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import javax.swing.event.*;
//for HTML Headers
import javax.swing.text.StyledEditorKit.*;
import javax.swing.text.html.HTMLEditorKit.*;
import javax.swing.text.html.*;
import javax.swing.event.HyperlinkListener;
import javax.swing.event.HyperlinkEvent;
import javax.swing.event.HyperlinkEvent.EventType;
import javax.swing.text.html.HTMLFrameHyperlinkEvent;
//for layout managers
import java.awt.event.*;
//for action and window events
import java.io.*;
import java.net.*;
import java.awt.GraphicsEnvironment;
//for font settings
import java.lang.Integer;
import java.util.Vector;
import java.awt.font.*;
import java.awt.geom.*;
public class guiClient extends JFrame implements ActionListener {
protected static final String textFieldString = "JTextField";
protected static final String loadgraphicString = "LoadGraphic";
protected static final String connectString = "Connect";
static JEditorPane editorPane;
static JPanel layoutPanel = new JPanel(new BorderLayout());
static JPanel controlPanel = new JPanel(new BorderLayout());
static JPanel buttonPanel = new JPanel(new BorderLayout());
static JPanel fontPanel = new JPanel(new BorderLayout());
static PrintStream out;
static DrawPanel dPanel;
static DrawPanel dPButton;
static DrawPanel dFonts;
static DrawControls dControls;
static DrawButtons dButtons;
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public static JMenuBar menuBar;
private static JButton connectbutton = new JButton("Connect");
static boolean CONNECTFLAG = false;
//create the gui interface
public guiClient() {
super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
fontlist.setSelectedIndex(0);
fontlist.setEditable(true);
fontlist.addActionListener(this);
fontchoice = envfonts[0];
//Create a regular text field.
JTextField textField = new JTextField(10);
textField.setActionCommand(textFieldString);
textField.addActionListener(this);
//Create an editor pane.
editorPane = new JEditorPane();
editorPane.setContentType("text");
editorPane.setEditable(false);
//set up HTML editor kit
HTMLDocument m_doc = new HTMLDocument();
editorPane.setDocument(m_doc);
HTMLEditorKit hkit = new HTMLEditorKit();
editorPane.setEditorKit( hkit );
editorPane.addHyperlinkListener( new HyperListener());
//Create whiteboard
dPanel = new DrawPanel();
dPButton = new DrawPanel();
dFonts = new DrawPanel();
dControls = new DrawControls(dPanel);
dButtons = new DrawButtons(dPButton);
//JLable fontLab = new JLabel(fontLable);
//fontLab.setText("Fonts");
//Font newFont = getFont().deriveFont(1);
//fontLab.setFont(newFont);
//fontLab.setHorizontalAlignment(JLabel.CENTER);
JPanel whiteboard = new JPanel();
whiteboard.setLayout(new BorderLayout());
whiteboard.setPreferredSize(new Dimension(300,300));
whiteboard.add("Center",dPanel);
whiteboard.add("South",dControls);
whiteboard.add("North",dButtons);
JScrollPane editorScrollPane = new JScrollPane(editorPane);
editorScrollPane.setVerticalScrollBarPolicy( JScrollPane.VERTICAL_SCROLLBAR_ALWAYS);
editorScrollPane.setPreferredSize(new Dimension(250, 145));
editorScrollPane.setMinimumSize(new Dimension(50, 50));
//put everything in a panel
JPanel contentPane = new JPanel();
JPanel fontPane = new JPanel();
contentPane.setLayout(new BoxLayout(contentPane, BoxLayout.Y_AXIS));
//add whiteboard
contentPane.add(whiteboard);
//add editor box
contentPane.add(editorScrollPane);
//add spacer
contentPane.add(Box.createRigidArea(new Dimension(0,5)));
//add textfield
contentPane.add(textField);
//set up layout pane
//layoutPanel.add(GridLayout(2,1),fontLab);
layoutPanel.add( BorderLayout.NORTH, fontlist);
layoutPanel.add(BorderLayout.WEST,new Label("Name: ")); //add a label
layoutPanel.add(BorderLayout.CENTER, userName ); //add textfield for user names
layoutPanel.add(BorderLayout.SOUTH, connectbutton);//add dropdown box for fonts
//fontPane.add(BorderLayout.NORTH,fontlist);
contentPane.add(layoutPanel);
contentPane.add(controlPanel);
contentPane.add(buttonPanel);
//Create the menu bar.
menuBar = new JMenuBar();
setJMenuBar(menuBar);
//Build the first menu.
JMenu menu = new JMenu("File");
menu.setMnemonic(KeyEvent.VK_F);
menuBar.add(menu);
//a group of JMenuItems
JMenuItem menuItem = new JMenuItem("Load Graphic", KeyEvent.VK_L);
menu.add(menuItem);
menuItem.setActionCommand(loadgraphicString);
menuItem.addActionListener(this);
connectbutton.setActionCommand(connectString);
connectbutton.addActionListener(this);
setContentPane(contentPane);
static private void insertTheHTML(JEditorPane editor, String html, int location) throws IOException {
HTMLEditorKit kit = (HTMLEditorKit) editor.getEditorKit();
Document doc = editor.getDocument();
StringReader reader = new StringReader(html);
try {
kit.read(reader, doc, location);
} catch (BadLocationException e) {}
//listen for actions being performed and process them
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
if (e.getActionCommand().equals(textFieldString)) {
JTextField fromUser = (JTextField)e.getSource();
if (fromUser != null){
//place user text in editor pane
//send message to server
if (userName.getText() != null) {
userString = userName.getText().trim();
out.println(userString + ": " + fromUser.getText());
fromUser.setText("");
} else if(e.getActionCommand().equals(connectString)) {
CONNECTFLAG = true;
} else if (e.getActionCommand().equals(loadgraphicString) ) {
final JFileChooser fc = new JFileChooser();
int returnVal = fc.showOpenDialog(this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
dPanel.loadImage(file.getAbsolutePath());
sendImage(file);
else if (e.getActionCommand().equals(fontlist)){
JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
userString = currentFont;
return;
/*public void itemStateChanged (ItemEvent e) {
if ( e.getStateChange() != ItemEvent.SELECTED ) {
return;
if ( list == fontlist ) {
fontchoice = (String)fontlist.getSelectedItem();
userString.changeFont(fontchoice);
//append text to the editor pane and put it at the bottom
public static void appendText(String text) {
if (text.startsWith("ID ") ) {
userString = text.substring(3);
} else if (text.startsWith("DRAW ") ) {
if (text.regionMatches(5,"LINE",0,4)) {
dPanel.processLine(text);
}else if (text.regionMatches(5,"POINTS",0,5)) {
dPanel.processPoint(text);
} else if (text.startsWith("IMAGE ") ) {
int len = (new Integer( text.substring(6, text.indexOf(",")))).intValue();
//get x and y coordinates
byte[] data = new byte[ (int)len ];
int read = 0;
try {
while (read < len) {
data = text.getBytes( text.substring(0, len) );
} catch (Exception e) {}
Image theImage = null;
theImage = dPanel.getToolkit().createImage(data);
dPanel.getToolkit().prepareImage(theImage, -1, -1, dPanel);
while ((dPanel.getToolkit().checkImage(theImage, -1, -1, dPanel) & dPanel.ALLBITS) == 0) {}
dPanel.drawPicture(0, 0, theImage);
} else {
//set current position in editorPane to the end
editorPane.setCaretPosition(editorPane.getDocument().getLength());
//put text into the editorPane
try {
insertTheHTML(editorPane, text, editorPane.getDocument().getLength());
} catch (IOException e) {}
} //end of appendText(String)
public void sendImage(File file) {
//find length of file
long len = file.length();
//read file into byte array
byte[] byteArray = new byte[(int)len];
try {
FileInputStream fstream = new FileInputStream(file);
if (fstream.read(byteArray) < len) {
//error could not load file
} else {
out.println("IMAGE " + len + ",");
out.write(byteArray, 0, (int)len); //write file to stream
} catch(Exception e){}
//run the client
public static void main(String[] args) {
String ipAddr=null, portNr=null;
if (args.length != 2) {
System.out.println("USAGE: java guiClient IP_Address port_number");
System.exit(0);
} else {
ipAddr = args[0];
portNr = args[1];
JFrame frame = new guiClient();
frame.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) { System.exit(0); }
frame.pack();
frame.setVisible(true);
while(CONNECTFLAG == false){}
//sames as previous client,
//set up connection and then listen for messages from the Server
String socketIP = ipAddr;
int port = Integer.parseInt(portNr);
//the IP address of the machine where the server is running
Socket theSocket = null;
//communication line to the server
out = null;
//for message sending
BufferedReader in = null;
//for message receiving
try {
theSocket = new Socket(socketIP, port );
//try to connect
out = new PrintStream(theSocket.getOutputStream());
dPanel.out = out;
//for client to send messages
in = new BufferedReader(new InputStreamReader(theSocket.getInputStream()));
BufferedReader userIn = new BufferedReader(new InputStreamReader(System.in));
String fromServer;
while ((fromServer = in.readLine()) != null) {
appendText(fromServer);
if (fromServer.equals("BYE")) {
appendText("Connection Closed");
break;
out.close();
//close all streams
in.close();
theSocket.close();
//close the socket
} catch (UnknownHostException e) {
//if the socket cannot be openned
System.err.println("Cannot find " + socketIP);
System.exit(1);
} catch (IOException e) { //if the socket cannot be read or written
System.err.println("Could not make I/O connection with " + socketIP);
System.exit(1);
class HyperListener implements HyperlinkListener {
public JEditorPane sourcePane;
public void hyperlinkUpdate(HyperlinkEvent e) {
if (e.getEventType() == HyperlinkEvent.EventType.ACTIVATED) {
sourcePane = (JEditorPane) e.getSource();
if (e instanceof HTMLFrameHyperlinkEvent) {
HTMLFrameHyperlinkEvent event = (HTMLFrameHyperlinkEvent) e;
System.out.println(event.getTarget());
HTMLDocument doc = (HTMLDocument) sourcePane.getDocument();
doc.processHTMLFrameHyperlinkEvent(event);
else {
try {}
catch (Exception ev){
ev.printStackTrace();
Well sorry the source code takes up the whole forum but I need a good feedback from this.All right...
public class guiClient extends JFrame implements ActionListener {
static String userString;
static String currentFont;
String fontchoice;
String fontlist;
static JTextField userName = new JTextField();
public guiClient() {
super("My Client");
public guiClient() {
super("My Client");
// Create a ComboBox
GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
String envfonts[] = gEnv.getAvailableFontFamilyNames();
Vector vector = new Vector();
for ( int i = 1; i < envfonts.length; i++ ) {
vector.addElement(envfonts);
JComboBox fontlist = new JComboBox (envfonts);
fontlist.setSelectedIndex(0);
fontlist.setEditable(true);
fontlist.addActionListener(this);
fontchoice = envfonts[0];
//Create a regular text field.
JTextField textField = new JTextField(10);
textField.setActionCommand(textFieldString);
textField.addActionListener(this);
public void actionPerformed(ActionEvent e) {
//if the action is from the textfield (e.g. user hits enter)
if (e.getActionCommand().equals(textFieldString)) {
JTextField fromUser = (JTextField)e.getSource();
if (fromUser != null){
//place user text in editor pane
//send message to server
if (userName.getText() != null) {
userString = userName.getText().trim();
out.println(userString + ": " + fromUser.getText());
fromUser.setText("");
else if (e.getActionCommand().equals(fontlist)){
JComboBox cb = (JComboBox)e.getSource();
String newSelection = (String)cb.getSelectedItem();
currentFont = newSelection;
userString = currentFont;
return; -
How to change Font on Apple Cloud calendar
I'm using a Lenovo Laptop T61.I am running Windows 7 Ultimate.
I have just installed Apple iCloud on it to sync my contact & calender with my iPhone 5 and my iPad Air. I'm working on other problems with them (like duplicating my calender appts 4-5 times for all years. However, this problem is what I need answers on now.
How do I change Font on Apple Cloud calendar. It went from a larger font to a smaller one somehow. I can not find how to make it larger on Apple Support FAQ.
The font is almost unreadable.
Thanks,
The Pool CommishDo you mean how do you change the display size?
System preferences - displays - and select the appropriate display size -
Change font and font size in a textedit
Hi,
I am using a textedit UI element in read only mode. its getting the value from context attribute. I need to change font and font size ( atleast the later) and make it bold.
how can this be done ?
plz help......
Thanks
AkashHi Thomas,
I saw from your response in the post above that you might be able to answer a question I have about the portal theme.
We are using several textedit elements in our portal, however the font size of text entered in those textedit fields is smaller than the standard global text in the portal. I have tried in vain to find the setting in the portal theme that controls textedit elements. Do you happen to know which one it is exactly?
Many thanks for any suggestions/help you might have
Paul. -
How to Change Fonts in Oracle Reports
Hi All,
When ever i am changing fonts in my report it reflects me when i run them on reports builder installed on my local machine.
But when i put them on application server, these changes are not reflected. I am generating PDF reports.
Can some body help me what should i need to do to reflect the font changes.
Thanks in advance.
Regards
KamalHi Kamal,
Whether the font used in the report is installed in the machine where Apps server is installed? If not , use the feature ' PDF Aliasing' to substitue for that particular font.
For more information on this, have a look at the chapter "Managing Fonts in Oracle Reports" in Publishing Reports Manual. You can download it from http://download.oracle.com/docs/pdf/B14048_01.pdf.
Thanks,
Vidya Viswanathan -
Illustrator CS5.1 crashes when changing fonts
Hoping someone can please help!! Every time I try to change fonts in Illustrator CS5.1, without fail it crashes. I'm on a macbook pro with retina display, OSX 10.9.4 and I have tried uninstalling then reinstalling the program and downloading the Adobe patches but my computer won't accept them. I've tried deleting the Illustrator preferences as well but nothing seems to work. PLEASE HELP?!!
dezine,
In serious cases requiring reinstallation, you should also use the Cleaner Tool, see 6) below.
But it may be something with fonts/font caches, see Items 1) and 11) in the link in 5) below; these may be the most probable causes.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
Sending Pages formatted document by apple mail changes font.
I have an iMac 2.66 GHz, 4 GB RAM and using OS 10.6.2(SL) and iWork '09 & Apple's Mail App.
A friend prepared a Pages document and sent it to me using Apple's Mail app.. He is using OS 10.5 and iWork '09. He told me that he used the Arial Font and all the Text & Images (using the Layout mode in Pages) looked fine on his computer (iMac). When I received his e-mail and opened his document, I notice that the document did not looked well. The text boxes were running into each other AND his original Arial Font had changed on my Desktop to Helvetica. BTW, I have used Helvetica in MY Pages documents in the past. I requested my friend to send me the same doc in PDF format.and it all came out just fine with proper spacings, etc. He also tried sending "compressing" the file via Finder menu: File>Compress(file name).pages,but results were as bad.
Can you help explain why the changes?? Thanks, BobI am not saying your friend is deceiving you or not to be trusted, just that +a lot+ passes people's notice. I could quickly check the document but have to go away to Sydney for a week or two and won't be able to get the email.
Is there a chance this document started on a PC, either as a Word .doc or template, where the Arial MT font was used?
I'd also check if you have a style "Normal" in the document, that is a dead give away that it came from MsWord.
I just checked, and you should too, the Arial fonts installed on my Mac which are labeled Arial Regular, Italic, Bold and Bold Italic are in fact all ArialMT © Microsoft. You can get that information in Font Book, select the font and +Show Font Info+ (command i). I can't swear to the origin of my fonts though, a lot gets installed without my knowing, but they look like the Mac OSX fonts.
If you do find these fonts with Font Book, turn them on and see what happens when you open the document.
The Arial MT font may also be buried in the styles of the document or in Section templates that you may or may not have used. To clear the styles of the font you can force a new style over the existing ones by creating sample text and go to the Styles Drawer click on the arrow next to the style and go "Redefine Style from Selection".
Once you have cleared out the document use the clean copy to share with your friend.
Peter -
Changing font size of the button
Hi,
how can it be changed font size of the button (other than standard and small)?
Thanks.Hello,
You can create a separate Theme to change or modify the properties of UI elements and can use it in your application. You should have System Admin role assigned in the portal.
Goto System Admin-> POrtal Display -> Theme Editor select any of the standard theme and change it to as per your requirement and save your theme with different name.
In webdynpro you can not change the font size of button. Hope this helps
Abhinav
Maybe you are looking for
-
HT201359 How to remove credit card info
How to remove credit card information
-
I am a beginner, so please bare with me... I added background color to a new project, placed the image and saved. When I export the saved image as a jpeg, the background color disappears. Why is this?
-
A webcast that I watch regularly doesn't openup. The screen reads blocked plug in. How do I unblock it? Also what caused it to be blocked in the first place?
-
I'm trying to place a phone call and when I do the 3G icon goes away and the phone just says connecting but never does. I have almost full service and only have had my new iPhone 5 for two days. Can anyone help because I can't call Sprint at the mome
-
How to retrieve long text for a particular record
Hi, I've been looking through some of the numerous posts relating to reading long texts but I can't seem to find out how to retrieve the necessary parameters for READ_TEXT for a particular record without using the GUI. Is there a way in ABAP that one