Changing Layout size with artwork

Hi there
I have 9 little magazines that I have to send for print tomorrow. I received the artwork on disc, but the initial artwork is a custom size. I need the artwork to be printed on A5.
Is it at all possible to change the page setting to A5 and the artwork will conform to the size change? Or do I have to change the artwork to fit the A5 size page by page?
Hope I asked the question right.
Thank you very much

Is the artwork PDF format?

Similar Messages

How to change flash size with ac3?

I want to change flash size with xml. Sample config.xml
<genGenis>300</genGenis>
<genYuksek>100</genYuksek>
My flash read xml and change size to 300 * 100
After working in a flash I want to change the default values. Is this possible?

Have you worked with XML before? You're going to need to load that XML file and wait for it to complete. After you do that, are you using layout logic based on these values to create your content? Meaning do you have code in place to realize you have (as you said) 500x200 space so your code is able to use the space available effectively? Or do you just expect the content of the SWF to scale automagically?
As for the loader, you can use a simple URLLoader to load the external XML file. Here's a quick Adobe code snippit and explaination on how to load it:
http://help.adobe.com/en_US/as3/dev/WS5b3ccc516d4fbf351e63e3d118a9b90204-7e6a.html
Once you have the XML in an XML object you can just access the value via the XML variable name you make (e.g. myXML) with the name of the node while getting its text value. In your case you'll need to convert it to a Number because you may want the flexibility of using fractions (e.g. 1.5, 500.25, etc). So you'd need to case the value to a number. So to get the width it'd be like: var myWidth:Number = Number(myXML.genGenis.text()); and same for height just changing the variable and node name as needed.
Now that you have your values you can write layout code to use the numbers and handle the content creation yourself.
If you don't do that, as Andrei1 mentioned you'll need to affect the object embedded directly using ExternalInterface (Flash AS3 talking to the webpages JavaScript) requesting the object be resized to the new size.
You'll want to make sure your stage.scaleMode = StageScaleMode.EXACT_FIT; or stage.scaleMode = StageScaleMode.NO_BORDER; so your SWF content is "stretched" to the size you request. Exact fit will allow the content to distort if necessary to fill the width and height. No border will scale the content to the size specified but will maintain the aspect ratio. It's up to you whichever you want.
If you have any specific questions on any of this just ask.

Cannot change page size with acrobat

I am able to convert my manuscript in Mac word(2011) to adobe acrobat (XI); unfortunately the 6 X 9 " page size does not convert. I spent a few hours on the phone with adobe support and the final resolution was to upload the file to them and they converted it for me. however, they used distiller which reduced the file size and appears to have affected the many images. Does anyone have any advice? The best I have been able to glean online is work with inDesign to change page size.

Thanks.
The problem was with the paper size. In addition to change the page size I needed to change the paper size in the print option before selecting save Adobe PDF.
From Word go to File> Print
Open the Copies & Pages dropdown
Select Paper Handling
Check the Scale to fit paper size box
Open the Destination Paper Size list
Select your custom 6x9 Preset
Click the PDF button
Select either Save as PDF or Save as Adobe PDF
The unfortunate thing is that I was able to do this initially, but when I went back to replicate it adobe is creating 2 files one with my cover page and the rest to the manuscript. Luckily my initial copy was good. Thanks again for your help.

Changing brush size with keyboard?

is there a way to change the size of a brush, like that of the clone stamp without having to drag the slider in the property inspector, but instead with a keyboard short cut like you can do in Photoshop?

It's possible that there exists an extension for this...
http://johndunning.com/fireworks/
http://orangecommands.com/
Here are a couple of places I'd search for this... Maybe it'll help!

Changing layout size of the Interactive Script in the Appl. Area

Hi Experts,
I need to change the standard size of the layout of the interactive script WinClient in the Apppl. Area. The screen has more space to increase the layout of the view of the Interactive Script but i don't know how to make this change.
Thanks for your help

hi!
create a variable window and write this code there
/: POSITION XORIGIN '2' CM YORIGIN '10' CM
/: SIZE WIDTH '18.05' CM HEIGHT '18' CM
/: BOX FRAME 10 TW
/: POSITION XORIGIN '2.05' CM YORIGIN '10.05' CM
/: BOX WIDTH '18' CM HEIGHT '1' CM INTENSITY 15
/: POSITION XORIGIN '3.5' CM YORIGIN '10' CM
/: BOX FRAME 10 TW WIDTH '0' TW HEIGHT '18' CM
/: POSITION XORIGIN '9.2' CM YORIGIN '10' CM
/: BOX FRAME 10 TW WIDTH '0' TW HEIGHT '18' CM
/: POSITION XORIGIN '11.5' CM YORIGIN '10' CM
/: BOX FRAME 10 TW WIDTH '0' TW HEIGHT '18' CM
then create a main window with same height and width as that of the varaible window (overlapping the variable window on to it).
now on looping in the main table and displaying the data boxes will come it self....
here the main window dimensions are
MAIN 00 Main Window 2,00 CM 10,00 CM 18,00 CM 18,00 CM
[then with the help of data element call the box
/: BOX WIDTH '18' CM HEIGHT '1' CM FRAME 10 TW
in loop where write_form is called....]
u will get the box with the data printed in the form......
keeping same for the variable window....
and try it....
this will be done....

Change Font Size with PDF attachment via e--mail

Hi experts,
I want to send mail with PDF attachment . Now the attachment is ok but only the font size in PDF is a little small.
Is that possible to Change the font size of PDF
Below is my code:
first the data comes from an internal table, then changed to an ABAP Pool.
* Create a new spool from the data in gt_data_pdf
new-page print on
destination c_local               "<<== my printer
cover text text-027               "<<== Title or Spool req. name
list name space
list dataset space
immediately space                 " X means print now
keep in spool c_checked           " X means keep spool
new list identification c_checked
line-size 255
line-count 65
no dialog .
loop at gt_data_pdf.
    write: / gt_data_pdf-line.
endloop.
new-page print off.
lv_spoolid = lv_spdel-rqident = sy-spono.
lv_spdel-sys = sy-sysid.
*Convert ABAP Spool to PDF
call function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    exporting
      src_spoolid   = lv_spoolid
      no_dialog     = c_checked
    importing
      pdf_bytecount = lv_pdf_fsize
    tables
      pdf           = lt_pdf_table
    exceptions
      others        = 0.
call function 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    exporting
      document_data              = lv_doc_chng
      put_in_outbox              = space
      commit_work                = c_checked
    tables
      packing_list               = lt_objpack
      object_header              = lt_objhead
      contents_bin               = lt_objbin
      contents_txt               = lt_objtxt
      receivers                  = lt_reclist
    exceptions
      too_many_receivers         = 1
      document_not_sent          = 2
      operation_no_authorization = 4
      others                     = 99.
Anyone could help me?
Thanks a lot.
Sincerely
Julie

Hi,
we don´t have many options for setting the font type and size in an ABAP list. One option is that you print the output using either SmartForms or AdobeForms, where you can control font type as well as size. This one requires additional work.
Another option is to use the instruction Print-Control:
NEW-PAGE PRINT ON.
PRINT-CONTROL FONT 1 SIZE 1 LPI 6 CPI 10.
WRITE: /10   'FONT 1 size 1 LPI 6 cpi 10'.
SKIP.
PRINT-CONTROL FONT 1 SIZE 5 LPI 6 CPI 5.
WRITE: /10   'FONT 1 size 5 LPI 6 cpi 5'.
SKIP.
PRINT-CONTROL FONT 2 SIZE 5 LPI 6 CPI 10.
WRITE: /10   'FONT 2 size 5 LPI 6 cpi 10'.
SKIP.
NEW-PAGE PRINT OFF.

Change Page size with a Script

I have made artwork in Illustrator that is set up as two page spreads on 1 artboard.
I need to convert this to single page spreads.
I.e. So for half the documents, I need to set the anchor point of the document to top left and half the width of the artboard.
For the other half of the documents, I need to set anchor point to to right and half the width.
Is this possible with scripting?
I have look around online to find ways of accessing the document size and anchor point via scripting, but cannot seem to find any resources.
Thanks for any help that can be offered.
Edit: Also is it possible to create a new artboard with a script and assign it a name?

here you go, this script splits the artboard in two
// carlos canto
// http://forums.adobe.com/message/5380624#5380624
var idoc = app.activeDocument;
var ab = idoc.artboards[0];
var abBounds = ab.artboardRect;// left, top, right, bottom
var ableft = abBounds[0]; // 0
var abtop = abBounds[1]; // 612
var abright = abBounds[2];
var abbottom = abBounds[3];
var abwidth = abright - ableft; // 792 // width
var abheight = abtop- abbottom; // 0 // height
var half = ableft + abwidth/2;
var abright2 = half;
ab.artboardRect = [ableft, abtop, abright2, abbottom];
var ableft2 = half;
var newAB = idoc.artboards.add([ableft2, abtop, abright, abbottom]);

CHANGE BRUSH SIZE WITH CTRL and alt KEYS

Hello everyone,
i'm on the road with my new macbook and i have a problem with setting up my wacom pen.
At home i use a iMac with CS5 and to change the brush size i press the alt and the ctrl key and move the pen to left/tight up/down to chang size and hardnes of the brush. I find this very handy!
On my new Macbook i have CC and i don't have the option to use this easy key combination, i was loking around and did some google, but i could not find the place to get the same settings on my macbook.
Is there anyone who can help me?
Thank you very much.

When you press and hold Option/Alt + Control and Left mouse click and drag nothing happens?
(the button on your pen is set to left click?)
The Option/Alt key should always be the second key to the left of the spacebar
The Control key should always be the third key to the left of the spacebar

Change Cursor Size with Pen Pressure

Does anyone know of a way to make the paintbrush cursor size change dynamically according to pen pressure with a tablet?
I'm coming to Photoshop from GIMP, and in GIMP when you use more or less pressure on the tablet, the cursor icon automatically changes size based on the pressure so you know exactly how large a line the tool will draw.
In Photoshop it seems you can choose "normal" or "full size" for the cursor circle, or else use crosshairs, but there doesn't seem to be an option for a dynamically shaped cursor. Am I wrong and just missing something? Or does Photoshop really not have this feature?

When you press and hold Option/Alt + Control and Left mouse click and drag nothing happens?
(the button on your pen is set to left click?)
The Option/Alt key should always be the second key to the left of the spacebar
The Control key should always be the third key to the left of the spacebar

Changing brush size with mouse

how to change size ardness of brush with the mouse on photoshop cc, mac os ? normaly it is ctrl + cliq up/down and left/ right

Thx a lot kelly !!
I was clicking and then control option
Merci beaucoup !!

Change brush sizes using [ ] too slow

I've recently swapped from Windows to Mac and I'm glad to be on Mac now. But whenever I'm changing brush sizes using the bracket keys the response time is way to slow.. I search the forum but found nothing on this. anyone have a fix for this..
Running Leopard with OS 10.5.4 three internal harddrives and 10 gigs ram.
All updates and patches were installed prior to photoshop.
Machine is one week old.

I completely remove Photoshop and did a clean install. Before changing anything I opened an image and tried increasing and decreasing my brush size using the bracket keys and everything was fine. The brush changes as soon as you hit the bracket key.
But as soon as you highlight the info palette top right corner and make it active then come back over the picture and try changing the brush size I'm getting a one second delay. If I hit the bracket key three times quickly the brush completely disapears and then reapears at the appropriate size.
This is a clean install with no plugins, no new fonts, no new nothing.
I then downloaded the latest upgrades.. Reset disk permission, ran the chron scripts and I'm getting the exact same reaction from photoshop when attempting to change brush size with the bracket keys.
Can anybody else reproduce this buy highlighting the info palette??
I called a buddy who also recently purchased a new Mac Pro and his machine is doing the exact same thing.

ACR 7.3 Bug on Adjustment Brush tool - changing brush size problem.

I update photoshop and using ACR 7.3 and now having big problem when I use Adjustment Brush took. Phe problem is when try to change brush size with holding right mouse button and moving the mouse. Behavior completely changed and its impossible to predict if I move mouse right what will happen.
Please check solution for it. old behaviour was great. I think this is not new feature, its bug.
Thanks in advance.

No need.
Already bugged and acknowledged: http://feedback.photoshop.com/photoshop_family/topics/bug_crash_adjustment_brush.

CS6 not changing photo size?

I have watched a few videos, on changing image size, in cs6, since when I tried it, the photo didn't change size at all. I could change it to 1 million inches tall, and it will stay the same size. I don't really know what to do. I've tried unlocking the default layer, and changing the canvas size and nothing seems to make this image change size. I want the image in the picture bigger, am I even doing it right by going under image, and changing the image size, and hitting ok? That is all the tutorials say to do, yet nothing happens for my image.

An image file just stores the image as arrays of pixels -- 1000 x 2000, 3000 x 4000, 5723 x 8557 or whatever. Those pixel maps don't have any inherent "size". The image file can also contain metadata that tells software how to interpret the pixels. For example, the metadata could say 72 pixels per inch (ppi), 100 ppi, 360 ppi, 1000 ppi, or whatever.
In Photoshop (and in most other pixel image editing programs), you can change the metadata to give the image a different "size" without changing the pixels at all. For example, an image that's 1000 x 2000 pixels, at 100 ppi, will be 10" x 20". If the ppi is changed to 1000 ppi, the same image will be 1" x 2". And at 10 ppi, the image will be 100" x 200". But the image pixels will be unchanged; they will just be bigger or smaller pixels. Each one of these files will be 2 megapixels and will occupy exactly the same amount of file space (before compression, assuming 8-bit RGB, 6 MB).
All of the foregoing is with "resample image" unchecked, which ensures no change to the pixel array data. Now, if you want to grow (or shrink) the size of the image pixel array, you can do that in photoshop by changing the size with "resample image" checked. This will add or subtract pixels, changing the image data. So if you change a 1000 x 2000 image that's 100 ppi and thus 10" x 20", by changing the image size to 1" x 2", with resampling checked, the data will be shrunk to give you a 100 x 200 image. 90% of the data will disappear. Your image will be 1/10 the size in terms of data and pre-compression file size. If you were to resize the image back to 10" x 20" with resampling unchecked, you would still have a 100 x 200 image, which would have 10 ppi resolution -- a much crappier image. If you were to resize the image back to 10" x 20" with resampling checked, you would get a 1000 x 2000 image with 100 ppi resolution, but it would still be a crappy image because 90% of the pixels would be newly created through interpolation, not the pixels in the original image.

Can anyone help with printer options on iPad mini, can I change layout paper size?

I am trying to change the printer options on my iPad mini so that I can print on legal size paper, I also would like to change to portrait layout. Is this an option when printing from an iPad Mini?

Chad-
I think the same problem exists with all the iOS devices. I suggest you look for a free App from the manufacturer of your printer. It will have limitations, but may include the ability to change paper size and image size and orientation.
There are other printing Apps such as Print n Share that can do that, but they are not free.
The problem you may face, is that such printing Apps can only be accessed from within other Apps that have the "Open In" option. If you can use their built-in programs, they may meet your needs.
Fred

Problem with changing layouts in xorg

Hi,
After installing new system (latest) i cant change layouts from keyboard
/etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.60 ([email protected]) Sun Oct 14 21:34:47 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "grp:ctrl_shift_toggle"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/etc/X11/xorg.conf.d/10-evdev.conf
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "XkbVariant" ","
Option "XkbLayout" "us,ru"
Option "XkbOptions" "grp:ctrl_shift_toggle"
# Option "XkbOptions" "grp:caps_toggle,grp_led:scroll"
EndSection
Xorg log
[ 3949.901]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 3949.901] X Protocol Version 11, Revision 0
[ 3949.901] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 3949.901] Current Operating System: Linux Hybrid 3.6.6-1-ARCH #1 SMP PREEMPT Mon Nov 5 11:57:22 CET 2012 x86_64
[ 3949.901] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=34540cd4-1fc1-4e6d-815f-f26b49fd0ffd ro quiet
[ 3949.901] Build Date: 19 October 2012 03:54:56PM
[ 3949.902]
[ 3949.902] Current version of pixman: 0.26.2
[ 3949.902] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3949.902] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3949.902] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 7 15:47:17 2012
[ 3949.902] (==) Using config file: "/etc/X11/xorg.conf"
[ 3949.902] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 3949.902] (==) ServerLayout "Layout0"
[ 3949.902] (**) |-->Screen "Screen0" (0)
[ 3949.902] (**) | |-->Monitor "Monitor0"
[ 3949.902] (**) | |-->Device "Device0"
[ 3949.902] (**) |-->Input Device "Keyboard0"
[ 3949.902] (**) |-->Input Device "Mouse0"
[ 3949.902] (==) Automatically adding devices
[ 3949.902] (==) Automatically enabling devices
[ 3949.902] (==) Automatically adding GPU devices
[ 3949.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3949.902] Entry deleted from font path.
[ 3949.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3949.902] Entry deleted from font path.
[ 3949.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3949.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3949.902] Entry deleted from font path.
[ 3949.902] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3949.902] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3949.902] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3949.902] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 3949.902] (WW) Disabling Keyboard0
[ 3949.902] (WW) Disabling Mouse0
[ 3949.902] (II) Module ABI versions:
[ 3949.902] X.Org ANSI C Emulation: 0.4
[ 3949.902] X.Org Video Driver: 13.0
[ 3949.902] X.Org XInput driver : 18.0
[ 3949.902] X.Org Server Extension : 7.0
[ 3949.904] (--) PCI:*(0:1:0:0) 10de:11c0:1043:8423 rev 161, Mem @ 0xf6000000/16777216, 0xe8000000/134217728, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3949.904] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3949.904] Initializing built-in extension Generic Event Extension
[ 3949.904] Initializing built-in extension SHAPE
[ 3949.904] Initializing built-in extension MIT-SHM
[ 3949.904] Initializing built-in extension XInputExtension
[ 3949.904] Initializing built-in extension XTEST
[ 3949.904] Initializing built-in extension BIG-REQUESTS
[ 3949.904] Initializing built-in extension SYNC
[ 3949.904] Initializing built-in extension XKEYBOARD
[ 3949.904] Initializing built-in extension XC-MISC
[ 3949.904] Initializing built-in extension SECURITY
[ 3949.904] Initializing built-in extension XINERAMA
[ 3949.904] Initializing built-in extension XFIXES
[ 3949.904] Initializing built-in extension RENDER
[ 3949.904] Initializing built-in extension RANDR
[ 3949.904] Initializing built-in extension COMPOSITE
[ 3949.904] Initializing built-in extension DAMAGE
[ 3949.904] Initializing built-in extension MIT-SCREEN-SAVER
[ 3949.904] Initializing built-in extension DOUBLE-BUFFER
[ 3949.904] Initializing built-in extension RECORD
[ 3949.904] Initializing built-in extension DPMS
[ 3949.904] Initializing built-in extension X-Resource
[ 3949.904] Initializing built-in extension XVideo
[ 3949.904] Initializing built-in extension XVideo-MotionCompensation
[ 3949.904] Initializing built-in extension XFree86-VidModeExtension
[ 3949.904] Initializing built-in extension XFree86-DGA
[ 3949.904] Initializing built-in extension XFree86-DRI
[ 3949.904] Initializing built-in extension DRI2
[ 3949.904] (II) LoadModule: "glx"
[ 3949.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3949.914] (II) Module glx: vendor="NVIDIA Corporation"
[ 3949.914] compiled for 4.0.2, module version = 1.0.0
[ 3949.914] Module class: X.Org Server Extension
[ 3949.914] (II) NVIDIA GLX Module 304.60 Sun Oct 14 20:44:54 PDT 2012
[ 3949.914] Loading extension GLX
[ 3949.914] (II) LoadModule: "nvidia"
[ 3949.915] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 3949.915] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 3949.915] compiled for 4.0.2, module version = 1.0.0
[ 3949.915] Module class: X.Org Video Driver
[ 3949.915] (II) NVIDIA dlloader X Driver 304.60 Sun Oct 14 20:24:42 PDT 2012
[ 3949.915] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 3949.915] (++) using VT number 1
[ 3949.915] (II) Loading sub module "fb"
[ 3949.915] (II) LoadModule: "fb"
[ 3949.915] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3949.916] (II) Module fb: vendor="X.Org Foundation"
[ 3949.916] compiled for 1.13.0, module version = 1.0.0
[ 3949.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3949.916] (II) Loading sub module "wfb"
[ 3949.916] (II) LoadModule: "wfb"
[ 3949.916] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 3949.916] (II) Module wfb: vendor="X.Org Foundation"
[ 3949.916] compiled for 1.13.0, module version = 1.0.0
[ 3949.916] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3949.916] (II) Loading sub module "ramdac"
[ 3949.916] (II) LoadModule: "ramdac"
[ 3949.916] (II) Module "ramdac" already built-in
[ 3949.916] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 3949.916] (==) NVIDIA(0): RGB weight 888
[ 3949.916] (==) NVIDIA(0): Default visual is TrueColor
[ 3949.916] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3949.916] (**) NVIDIA(0): Enabling 2D acceleration
[ 3950.393] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-0)) does not support NVIDIA 3D
[ 3950.393] (II) NVIDIA(GPU-0): Vision stereo.
[ 3950.403] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-3)) does not support NVIDIA 3D
[ 3950.403] (II) NVIDIA(GPU-0): Vision stereo.
[ 3950.403] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660 (GK106) at PCI:1:0:0 (GPU-0)
[ 3950.403] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 3950.403] (--) NVIDIA(0): VideoBIOS: 80.06.10.00.0e
[ 3950.403] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 3950.403] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 3950.406] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660 at PCI:1:0:0
[ 3950.406] (--) NVIDIA(0): CRT-0
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-0) (connected)
[ 3950.406] (--) NVIDIA(0): DFP-1
[ 3950.406] (--) NVIDIA(0): DFP-2
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-3) (connected)
[ 3950.406] (--) NVIDIA(0): DFP-4
[ 3950.406] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-0): 330.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-0): Internal Dual Link TMDS
[ 3950.406] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 3950.406] (--) NVIDIA(0): DFP-2: 165.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-3): 330.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): Samsung SMBX2331 (DFP-3): Internal Dual Link TMDS
[ 3950.406] (--) NVIDIA(0): DFP-4: 960.0 MHz maximum pixel clock
[ 3950.406] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 3950.406] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3950.406] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-0) (Using EDID frequencies
[ 3950.406] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3950.407] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3950.407] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.407] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.407] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.407] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.407] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3950.407] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.407] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.407] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.407] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.408] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3950.408] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-3) (Using EDID frequencies
[ 3950.408] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3950.408] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3950.408] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.408] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.408] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.408] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.409] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3950.409] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.409] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.409] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.409] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.410] (==) NVIDIA(0):
[ 3950.410] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 3950.410] (==) NVIDIA(0): will be used as the requested mode.
[ 3950.410] (==) NVIDIA(0):
[ 3950.410] (II) NVIDIA(0): Validated MetaModes:
[ 3950.410] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 3950.410] (II) NVIDIA(0): Virtual screen size determined to be 3840 x 1080
[ 3950.443] (--) NVIDIA(0): DPI set to (95, 94); computed from "UseEdidDpi" X config
[ 3950.443] (--) NVIDIA(0): option
[ 3950.443] (--) Depth 24 pixmap format is 32 bpp
[ 3950.443] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 3950.443] (II) NVIDIA: access.
[ 3950.445] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 3950.445] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 3950.445] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 3950.445] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 3950.445] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 3950.445] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 3950.445] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 3950.445] (II) NVIDIA(0): Config Options in the README.
[ 3950.448] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-3:nvidia-auto-select"
[ 3950.551] Loading extension NV-GLX
[ 3950.608] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 3950.608] (==) NVIDIA(0): Backing store disabled
[ 3950.608] (==) NVIDIA(0): Silken mouse enabled
[ 3950.608] (**) NVIDIA(0): DPMS enabled
[ 3950.608] Loading extension NV-CONTROL
[ 3950.609] Loading extension XINERAMA
[ 3950.609] (II) Loading sub module "dri2"
[ 3950.609] (II) LoadModule: "dri2"
[ 3950.609] (II) Module "dri2" already built-in
[ 3950.609] (II) NVIDIA(0): [DRI2] Setup complete
[ 3950.609] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 3950.609] (--) RandR disabled
[ 3950.611] (II) Initializing extension GLX
[ 3950.643] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 3950.643] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3950.643] (II) LoadModule: "evdev"
[ 3950.643] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 3950.643] (II) Module evdev: vendor="X.Org Foundation"
[ 3950.643] compiled for 1.13.0, module version = 2.7.3
[ 3950.643] Module class: X.Org XInput Driver
[ 3950.643] ABI class: X.Org XInput driver, version 18.0
[ 3950.643] (II) Using input driver 'evdev' for 'Power Button'
[ 3950.643] (**) Power Button: always reports core events
[ 3950.643] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 3950.643] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3950.644] (--) evdev: Power Button: Found keys
[ 3950.644] (II) evdev: Power Button: Configuring as keyboard
[ 3950.644] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 3950.644] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3950.644] (**) Option "xkb_rules" "evdev"
[ 3950.644] (**) Option "xkb_model" "evdev"
[ 3950.644] (**) Option "xkb_layout" "us,ru"
[ 3950.644] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3950.663] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 3950.663] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3950.663] (II) Using input driver 'evdev' for 'Power Button'
[ 3950.663] (**) Power Button: always reports core events
[ 3950.663] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 3950.663] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 3950.663] (--) evdev: Power Button: Found keys
[ 3950.663] (II) evdev: Power Button: Configuring as keyboard
[ 3950.663] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 3950.663] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 3950.663] (**) Option "xkb_rules" "evdev"
[ 3950.663] (**) Option "xkb_model" "evdev"
[ 3950.663] (**) Option "xkb_layout" "us,ru"
[ 3950.663] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3950.663] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 3950.663] (II) No input driver specified, ignoring this device.
[ 3950.663] (II) This device may have been added with another device file.
[ 3950.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 3950.664] (II) No input driver specified, ignoring this device.
[ 3950.664] (II) This device may have been added with another device file.
[ 3950.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 3950.664] (II) No input driver specified, ignoring this device.
[ 3950.664] (II) This device may have been added with another device file.
[ 3950.664] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 3950.664] (II) No input driver specified, ignoring this device.
[ 3950.664] (II) This device may have been added with another device file.
[ 3950.664] (II) config/udev: Adding input device UVC Camera (046d:0821) (/dev/input/event6)
[ 3950.664] (**) UVC Camera (046d:0821): Applying InputClass "evdev keyboard catchall"
[ 3950.664] (II) Using input driver 'evdev' for 'UVC Camera (046d:0821)'
[ 3950.664] (**) UVC Camera (046d:0821): always reports core events
[ 3950.664] (**) evdev: UVC Camera (046d:0821): Device: "/dev/input/event6"
[ 3950.664] (--) evdev: UVC Camera (046d:0821): Vendor 0x46d Product 0x821
[ 3950.664] (--) evdev: UVC Camera (046d:0821): Found keys
[ 3950.664] (II) evdev: UVC Camera (046d:0821): Configuring as keyboard
[ 3950.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.2/input/input6/event6"
[ 3950.664] (II) XINPUT: Adding extended input device "UVC Camera (046d:0821)" (type: KEYBOARD, id 8)
[ 3950.664] (**) Option "xkb_rules" "evdev"
[ 3950.664] (**) Option "xkb_model" "evdev"
[ 3950.664] (**) Option "xkb_layout" "us,ru"
[ 3950.664] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3950.664] (II) config/udev: Adding input device Razer Razer Mamba Charging Dock (/dev/input/event3)
[ 3950.664] (**) Razer Razer Mamba Charging Dock: Applying InputClass "evdev pointer catchall"
[ 3950.664] (II) Using input driver 'evdev' for 'Razer Razer Mamba Charging Dock'
[ 3950.664] (**) Razer Razer Mamba Charging Dock: always reports core events
[ 3950.664] (**) evdev: Razer Razer Mamba Charging Dock: Device: "/dev/input/event3"
[ 3950.664] (--) evdev: Razer Razer Mamba Charging Dock: Vendor 0x1532 Product 0xf
[ 3950.664] (--) evdev: Razer Razer Mamba Charging Dock: Found 11 mouse buttons
[ 3950.664] (--) evdev: Razer Razer Mamba Charging Dock: Found scroll wheel(s)
[ 3950.664] (--) evdev: Razer Razer Mamba Charging Dock: Found relative axes
[ 3950.664] (--) evdev: Razer Razer Mamba Charging Dock: Found x and y relative axes
[ 3950.664] (II) evdev: Razer Razer Mamba Charging Dock: Configuring as mouse
[ 3950.664] (II) evdev: Razer Razer Mamba Charging Dock: Adding scrollwheel support
[ 3950.664] (**) evdev: Razer Razer Mamba Charging Dock: YAxisMapping: buttons 4 and 5
[ 3950.664] (**) evdev: Razer Razer Mamba Charging Dock: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3950.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input3/event3"
[ 3950.664] (II) XINPUT: Adding extended input device "Razer Razer Mamba Charging Dock" (type: MOUSE, id 9)
[ 3950.664] (II) evdev: Razer Razer Mamba Charging Dock: initialized for relative axes.
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) keeping acceleration scheme 1
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration profile 0
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration factor: 2.000
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration threshold: 4
[ 3950.665] (II) config/udev: Adding input device Razer Razer Mamba Charging Dock (/dev/input/mouse0)
[ 3950.665] (II) No input driver specified, ignoring this device.
[ 3950.665] (II) This device may have been added with another device file.
[ 3950.665] (II) config/udev: Adding input device Razer Razer Mamba Charging Dock (/dev/input/event4)
[ 3950.665] (**) Razer Razer Mamba Charging Dock: Applying InputClass "evdev keyboard catchall"
[ 3950.665] (II) Using input driver 'evdev' for 'Razer Razer Mamba Charging Dock'
[ 3950.665] (**) Razer Razer Mamba Charging Dock: always reports core events
[ 3950.665] (**) evdev: Razer Razer Mamba Charging Dock: Device: "/dev/input/event4"
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Vendor 0x1532 Product 0xf
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Found 1 mouse buttons
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Found scroll wheel(s)
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Found relative axes
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: Forcing relative x/y axes to exist.
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Found absolute axes
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: Forcing absolute x/y axes to exist.
[ 3950.665] (--) evdev: Razer Razer Mamba Charging Dock: Found keys
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: Configuring as mouse
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: Configuring as keyboard
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: Adding scrollwheel support
[ 3950.665] (**) evdev: Razer Razer Mamba Charging Dock: YAxisMapping: buttons 4 and 5
[ 3950.665] (**) evdev: Razer Razer Mamba Charging Dock: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3950.665] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.1/input/input4/event4"
[ 3950.665] (II) XINPUT: Adding extended input device "Razer Razer Mamba Charging Dock" (type: KEYBOARD, id 10)
[ 3950.665] (**) Option "xkb_rules" "evdev"
[ 3950.665] (**) Option "xkb_model" "evdev"
[ 3950.665] (**) Option "xkb_layout" "us,ru"
[ 3950.665] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3950.665] (II) evdev: Razer Razer Mamba Charging Dock: initialized for relative axes.
[ 3950.665] (WW) evdev: Razer Razer Mamba Charging Dock: ignoring absolute axes.
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) keeping acceleration scheme 1
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration profile 0
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration factor: 2.000
[ 3950.665] (**) Razer Razer Mamba Charging Dock: (accel) acceleration threshold: 4
[ 3950.665] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2010 (/dev/input/event5)
[ 3950.665] (**) Logitech Unifying Device. Wireless PID:2010: Applying InputClass "evdev keyboard catchall"
[ 3950.665] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2010'
[ 3950.665] (**) Logitech Unifying Device. Wireless PID:2010: always reports core events
[ 3950.665] (**) evdev: Logitech Unifying Device. Wireless PID:2010: Device: "/dev/input/event5"
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Vendor 0x46d Product 0xc52b
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found 1 mouse buttons
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found scroll wheel(s)
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found relative axes
[ 3950.665] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Forcing relative x/y axes to exist.
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found absolute axes
[ 3950.665] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Forcing absolute x/y axes to exist.
[ 3950.665] (--) evdev: Logitech Unifying Device. Wireless PID:2010: Found keys
[ 3950.665] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Configuring as mouse
[ 3950.665] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Configuring as keyboard
[ 3950.665] (II) evdev: Logitech Unifying Device. Wireless PID:2010: Adding scrollwheel support
[ 3950.665] (**) evdev: Logitech Unifying Device. Wireless PID:2010: YAxisMapping: buttons 4 and 5
[ 3950.665] (**) evdev: Logitech Unifying Device. Wireless PID:2010: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 3950.665] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.2/0003:046D:C52B.0005/input/input5/event5"
[ 3950.665] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2010" (type: KEYBOARD, id 11)
[ 3950.665] (**) Option "xkb_rules" "evdev"
[ 3950.665] (**) Option "xkb_model" "evdev"
[ 3950.665] (**) Option "xkb_layout" "us,ru"
[ 3950.666] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[ 3950.666] (II) evdev: Logitech Unifying Device. Wireless PID:2010: initialized for relative axes.
[ 3950.666] (WW) evdev: Logitech Unifying Device. Wireless PID:2010: ignoring absolute axes.
[ 3950.666] (**) Logitech Unifying Device. Wireless PID:2010: (accel) keeping acceleration scheme 1
[ 3950.666] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration profile 0
[ 3950.666] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration factor: 2.000
[ 3950.666] (**) Logitech Unifying Device. Wireless PID:2010: (accel) acceleration threshold: 4
[ 3950.666] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 3950.666] (II) No input driver specified, ignoring this device.
[ 3950.666] (II) This device may have been added with another device file.
[ 3950.666] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 3950.666] (II) No input driver specified, ignoring this device.
[ 3950.666] (II) This device may have been added with another device file.
[ 3950.666] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[ 3950.666] (II) No input driver specified, ignoring this device.
[ 3950.666] (II) This device may have been added with another device file.
[ 3950.667] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event12)
[ 3950.667] (II) No input driver specified, ignoring this device.
[ 3950.667] (II) This device may have been added with another device file.
[ 3950.667] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 3950.667] (II) No input driver specified, ignoring this device.
[ 3950.667] (II) This device may have been added with another device file.
[ 3950.667] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 3950.667] (II) No input driver specified, ignoring this device.
[ 3950.667] (II) This device may have been added with another device file.
[ 3950.667] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 3950.667] (II) No input driver specified, ignoring this device.
[ 3950.667] (II) This device may have been added with another device file.
[ 3950.702] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-0)) does not support NVIDIA 3D
[ 3950.702] (II) NVIDIA(GPU-0): Vision stereo.
[ 3950.702] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3950.702] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-0) (Using EDID frequencies
[ 3950.702] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3950.702] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3950.702] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.702] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.702] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.702] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.703] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3950.703] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.703] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.703] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.703] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.714] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-3)) does not support NVIDIA 3D
[ 3950.714] (II) NVIDIA(GPU-0): Vision stereo.
[ 3950.714] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3950.714] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-3) (Using EDID frequencies
[ 3950.714] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3950.714] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3950.714] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.714] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.714] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.714] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3950.714] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3950.714] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3950.714] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3950.714] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3950.714] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3951.033] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-0)) does not support NVIDIA 3D
[ 3951.033] (II) NVIDIA(GPU-0): Vision stereo.
[ 3951.033] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3951.033] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-0) (Using EDID frequencies
[ 3951.033] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3951.033] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3951.033] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3951.033] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3951.033] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3951.033] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3951.034] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3951.034] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3951.034] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3951.034] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3951.034] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3951.044] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-3)) does not support NVIDIA 3D
[ 3951.044] (II) NVIDIA(GPU-0): Vision stereo.
[ 3951.044] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3951.044] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-3) (Using EDID frequencies
[ 3951.044] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3951.044] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3951.044] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3951.044] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3951.044] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3951.044] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3951.045] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3951.045] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3951.045] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3951.045] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3951.045] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3961.685] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-0)) does not support NVIDIA 3D
[ 3961.685] (II) NVIDIA(GPU-0): Vision stereo.
[ 3961.685] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3961.685] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-0) (Using EDID frequencies
[ 3961.685] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3961.686] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3961.686] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3961.686] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3961.686] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3961.686] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3961.686] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3961.686] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3961.686] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3961.686] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3961.686] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3961.697] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-3)) does not support NVIDIA 3D
[ 3961.697] (II) NVIDIA(GPU-0): Vision stereo.
[ 3961.697] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3961.697] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-3) (Using EDID frequencies
[ 3961.697] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3961.697] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3961.697] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3961.697] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3961.697] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3961.697] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3961.697] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3961.697] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3961.697] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3961.697] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3961.697] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3963.080] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-0)) does not support NVIDIA 3D
[ 3963.080] (II) NVIDIA(GPU-0): Vision stereo.
[ 3963.080] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3963.080] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-0) (Using EDID frequencies
[ 3963.080] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3963.080] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3963.080] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3963.080] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3963.080] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3963.080] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3963.081] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-0) contradicts itself: mode
[ 3963.081] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3963.081] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3963.081] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3963.081] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3963.091] (II) NVIDIA(GPU-0): Display (Samsung SMBX2331 (DFP-3)) does not support NVIDIA 3D
[ 3963.091] (II) NVIDIA(GPU-0): Vision stereo.
[ 3963.091] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 3963.091] (**) NVIDIA(0): device Samsung SMBX2331 (DFP-3) (Using EDID frequencies
[ 3963.091] (**) NVIDIA(0): has been enabled on all display devices.)
[ 3963.091] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3963.091] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3963.091] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3963.091] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3963.091] (WW) NVIDIA(GPU-0): for mode "1920x1080".
[ 3963.092] (WW) NVIDIA(GPU-0): The EDID for Samsung SMBX2331 (DFP-3) contradicts itself: mode
[ 3963.092] (WW) NVIDIA(GPU-0): "1920x1080" is specified in the EDID; however, the EDID's
[ 3963.092] (WW) NVIDIA(GPU-0): valid HorizSync range (31.000-81.000 kHz) would exclude
[ 3963.092] (WW) NVIDIA(GPU-0): this mode's HorizSync (28.1 kHz); ignoring HorizSync check
[ 3963.092] (WW) NVIDIA(GPU-0): for mode "1920x1080".
Output of setxkbmap -print -verbose 10
Setting verbose level to 10
locale is C
Trying to load rules file ./rules/evdev...
Trying to load rules file /usr/share/X11/xkb/rules/evdev...
Success.
Applied rules from evdev:
rules: evdev
model: evdev
layout: us,ru
variant: ,
Trying to build keymap using the following components:
keycodes: evdev+aliases(qwerty)
types: complete
compat: complete
symbols: pc+us+ru:2+inet(evdev)
geometry: pc(pc104)
xkb_keymap {
xkb_keycodes { include "evdev+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compat { include "complete" };
xkb_symbols { include "pc+us+ru:2+inet(evdev)" };
xkb_geometry { include "pc(pc104)" };
But this comand helps:
setxkbmap -layout "us,ru" -option "grp:ctrl_shift_toggle"
New output of setxkbmap -print -verbose 10
Setting verbose level to 10
locale is C
Trying to load rules file ./rules/evdev...
Trying to load rules file /usr/share/X11/xkb/rules/evdev...
Success.
Applied rules from evdev:
rules: evdev
model: evdev
layout: us,ru
options: grp:ctrl_shift_toggle
Trying to build keymap using the following components:
keycodes: evdev+aliases(qwerty)
types: complete
compat: complete
symbols: pc+us+ru:2+inet(evdev)+group(ctrl_shift_toggle)
geometry: pc(pc104)
xkb_keymap {
xkb_keycodes { include "evdev+aliases(qwerty)" };
xkb_types { include "complete" };
xkb_compat { include "complete" };
xkb_symbols { include "pc+us+ru:2+inet(evdev)+group(ctrl_shift_toggle)" };
xkb_geometry { include "pc(pc104)" };
This config is still not changing visualistaion of layout (right top corner of gnome), but triggering is ok
If it helps - keyboard is Logitech K800, desktop - gnome 3
Thanks for attention and sorry for my bad english
UPD: Solved by Gnome settings, not Xorg
Last edited by fu2re (2012-11-12 09:44:01)

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Changing Layout size with artwork

Similar Messages

Maybe you are looking for