Changing Namespace section of the XML

Hello,
Following section is generated from one of my outbound IDoc:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:cXML xmlns:ns0="http://abc.com/xi/module" paloadID="700997" lang="en" timestamp="2006/03/07">
But the vendor is expecting this section as below:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cXML SYSTEM "http://xml.cxml.org/schemas/cXML/1.1.009/cXML.dtd">
<cXML payloadID="[email protected]" timestamp="2005-09-07T16:10:45-08:00" xml:lang="en-US">
Is there any way to solve this problem?
Thanks
Message was edited by: Peter Livingstone

Hello Peter,
if i see that correctly, XI currently puts in an XML namespace whereas your partner expects no namespace at all. This can easily be achieved in XI. Just go to your message type, change to edit mode and then delete the value in field XML Namespace. This will delete the targetNamespace tag from the XSD definition so that all messages will be generated without a message namespace. The principial behind this is, that the XML namespace is not necessarily the same as the Integration Repository Namespace of the objects in XI but will be set to the repository namespace by default.
Regards
Christine

Similar Messages

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

Reference a DSL from CDATA section in an Xml file

I use a DSL along with some XML files in an Eclipse project. I would like to reference some of the DSL entities from within a CDATA section in the XML files and provide content assist for doing so.
Would I need to define a DSL for the XML and then implement some DSL cross referencing ?
Would I lose the default XML features of Eclipse if I do so ?
Is there a way to overload the XML support built into Eclipse for implementing this ?

I don't know about the extension capabilities of the XML editor. You would need to investigate how this editor can be extended first. This might be a question for Eclipse Web Tools Platform, if you use that XML editor (there are several XML editor plugins available).

Change letter Section

Hi,
This issue is with change letter section for a correspondance activity.
Example- Create activity: Telephone Interview. We add details of the date, time and addess. If we see preview all the entered details are seen. Then we decide to add some more information, we choose change letter section. The editor shows blank details for the date, time and addess even though they were added previously.
Can some one guide me on how we can address the editor issue.
Regards
Savitha

Hi,
Are you referring to below entry,
RECFA INDCO
Individual Correspondence with/without Web Editor "Specifies in what way users can customize letters (Smart Form templates) for correspondence activities.
The following switch settings are possible:1. RECFA INDCO = ' ' .HTML editor is used (default setting)
2. RECFA INDCO = 'X'. Functions to change a predefined letter section are used.
The two functions cannot be used at the same time.
Note: Depending on the switch setting, you must use different types of Smart Form templates so that changes to the letters are possible using the relevant technique. You use the IMG activity Create Forms to create the forms.
I can see it is X in T77S0 table.
Regards
Savitha

Possible to change the xml output of the Inbound Interface?

Hi All,
I hav a scenarion where a third party system receives the XML from XI. the output of the xml from XI looks as follows:
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
- <ns1:WMSItalyItemReplication xmlns:ns1="http://cpe.com/cpe_ftp_wms/ItemReplication">
- <item_dl dt_tm_created="2006-06-29 09:02:23">
- <item action="" owner_id="CIB" itm_num="3143832ZZ99">
<itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a />
<itm_udef_b />
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d />
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
</ns1:WMSItalyItemReplication>
</ns0:Message1>
</ns0:Messages>
And the output that the third party expects is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE item_dl SYSTEM "http://localhost/dtd/item_dl.dtd">
<item_dl><item><itm_desc>Ageflex ACM50 Test</itm_desc>
<unt_dol_val>1</unt_dol_val>
<lic_ctrl_flg>Y</lic_ctrl_flg>
<lot_ctrl_flg>Y</lot_ctrl_flg>
<shelf_life>999</shelf_life>
<product_life>999</product_life>
<incubate_prd>0</incubate_prd>
<hold_ord_flg>N</hold_ord_flg>
<kit_type>N</kit_type>
<prelabel_flg>N</prelabel_flg>
<rcv_only_flg>N</rcv_only_flg>
<convey_flg>N</convey_flg>
<front_flip_flg>N</front_flip_flg>
<pick_shp_bp>N</pick_shp_bp>
<side_flip_flg>N</side_flip_flg>
<rotate_flg>N</rotate_flg>
<itm_udef_a></itm_udef_a>
<itm_udef_b></itm_udef_b>
<itm_udef_c>Constant1</itm_udef_c>
<itm_udef_d></itm_udef_d>
<multi_conf_flg>N</multi_conf_flg>
</item>
</item_dl>
Observe the first two lines of the second output.
I tried to generate the second xml using a java mapping. and it is working fine when i test it in the Interface mapping's test tab. but it is not working when i test the scenario end to end. It is giving some runtime error.
is it possible to change the namespace, etc in the output of the XML coming out of XI? if v change those namespace stuff, does XI recongnise the message and send it to the appropriate reciever?
Please suggest me any solution.
any help wud b greatly appreciated.

The first XML is a Split msg XML..Where there are multiple messages within a single XML document..Thats why u have a <ns0:Messages xmllns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
Tags..
Recheck what ur target system needs are & change ur mapping in XI.

Building XPath with the XML having the Namespace using PL SQL

While trying to build the path of each node, when the XML has no namespace in it , the below code works fine providing the result
1~/
2~/person/
3~/person/age/
4~/person/homecity/
5~/person/name/
6~/person/homecity/lat/
7~/person/homecity/name/
8~/person/homecity/long/
But when the xml is changed to
<person xmlns="urn:person" xmlns:lat="urn:lat">
<name>Rob</name>
<age>37</age>
<homecity>
    <name>London</name>
    <lat>123.000</lat>
    <long>0.00</long>
</homecity>
</person>"
The result on executing the below code is resulting into only into below result
1~/
2~/person/
In the XML provided above, XML name space is not constant and it may vary for every XML. My requirement is to parse the complete XML, where i can read the XML with namespace and get the result as mentioned below
1~/
2~/person/
3~/person/age/
4~/person/homecity/
5~/person/name/
6~/person/homecity/lat:lat/
7~/person/homecity/name/
8~/person/homecity/long/
Can you please help me resolving the issue mentioned. Thanks in advance. --Code Snippet below :
DECLARE
l_File VARCHAR2(32000) := '<person>
<name>Rob</name>
<age>37</age>
<homecity>
    <name>London</name>
    <lat>123.000</lat>
    <long>0.00</long>
</homecity>
</person>';
l_Where_Clause VARCHAR2(100) := '/*';
l_Append_Var   VARCHAR2(100) := '/';
TYPE Ty_Paths IS TABLE OF VARCHAR2(1000) INDEX BY PLS_INTEGER;
l_Ty_Paths      Ty_Paths;
l_Ty_Paths_Temp Ty_Paths;
TYPE Ty_Verifier IS TABLE OF VARCHAR2(1000) INDEX BY VARCHAR2(1000);
l_Ty_Varifier Ty_Verifier;
l_Prev_Query_Rec VARCHAR2(100);
l_Index_Num      NUMBER := 0;
l_Cur_Exec_Row   NUMBER := 0;
BEGIN
l_Ty_Paths(Nvl(l_Ty_Paths.COUNT, 0) + 1) := l_Append_Var;
l_Cur_Exec_Row := 1;
--Dbms_Output.put_line('Before entering the loop');
LOOP
   l_Ty_Paths_Temp.DELETE;
SELECT DISTINCT REPLACE(l_Append_Var || '/' || t.Xml || '/', '//', '/') BULK COLLECT
   INTO   l_Ty_Paths_Temp
FROM   (SELECT Xmltype(Extract(VALUE(e), '/').Getstringval()) .Getrootelement() AS Xml
           FROM   TABLE(Xmlsequence(Extract(Xmltype(l_File), l_Where_Clause))) e) t;
l_Ty_Varifier(Nvl(l_Ty_Varifier.COUNT, 0) + 1) := l_Append_Var;
--Dbms_Output.put_line('L_TY_PATHS_TEMP.Count::'||L_TY_PATHS_TEMP.Count);
IF l_Ty_Paths_Temp.COUNT > 0 THEN
     l_Index_Num := Nvl(l_Ty_Paths.COUNT, 0) + 1;
     FOR i IN l_Ty_Paths_Temp.FIRST .. l_Ty_Paths_Temp.LAST LOOP
        l_Ty_Paths(l_Index_Num) := l_Ty_Paths_Temp(i);
        --Dbms_Output.put_line('L_INDEX_NUM::'||L_INDEX_NUM);
        --Dbms_Output.put_line('L_TY_PATHS(L_INDEX_NUM)::'||L_TY_PATHS(L_INDEX_NUM));
        l_Index_Num := l_Index_Num + 1;
     END LOOP;
END IF;
--Dbms_Output.put_line('L_TY_PATHS.Count::'||L_TY_PATHS.Count);
--Dbms_Output.put_line('L_TY_PATHS.Count::'||L_CUR_EXEC_ROW);
IF (NOT l_Ty_Paths.EXISTS(l_Cur_Exec_Row + 1)) OR (l_Cur_Exec_Row = l_Ty_Paths.COUNT) THEN
     --Dbms_Output.put_line('Exiting');
     EXIT;
ELSE
     --Dbms_Output.put_line('Inside the Else part');
     l_Cur_Exec_Row := l_Cur_Exec_Row + 1;
     l_Append_Var   := l_Ty_Paths(l_Cur_Exec_Row);
     l_Where_Clause := l_Ty_Paths(l_Cur_Exec_Row) || '*';
END IF;
--To Display the record:
     --Dbms_Output.put_line(L_TY_PATHS.Count);
END LOOP;
IF l_Ty_Paths.COUNT > 0 THEN
    FOR i IN l_Ty_Paths.FIRST .. l_Ty_Paths.LAST LOOP
      Dbms_Output.Put_Line(i || ' record is ' || l_Ty_Paths(i));
   END LOOP;
END IF;
END;

Hi,
Thanks for the reply.
Please find the details :
1) What's your database version ?
Database version :
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
2) What's the practical use of extracting all the paths like this, what are you trying to achieve, besides a purely academic exercise ?
The XML provided was for sample XML.
The practical use being ,I wanted to parse the SEPA messages using the below code snippet dynamically.
create table data_table (
     data xmltype
    xmltype column data store as securefile binary xml
insert into data_table values (
    xmltype('<?xml version="1.0" encoding="UTF-8"?>
<SCTScfBlkCredTrf xmlns="urn:S2SCTScf:xsd:$SCTScfBlkCredTrf">
<SndgInst>CMCIFRPPXXX</SndgInst>
<RcvgInst>RLBBAT2E083</RcvgInst>
<FileRef>006FRID2516PH712</FileRef>
<SrvcId>SCT</SrvcId>
<TstCode>T</TstCode>
<FType>SCF</FType>
<FDtTm>2012-11-01T01:12:22</FDtTm>
<NumCTBlk>1</NumCTBlk>
<NumPCRBlk>0</NumPCRBlk>
<NumRFRBlk>0</NumRFRBlk>
<NumROIBlk>0</NumROIBlk>
<FIToFICstmrCdtTrf xmlns="urn:iso:std:iso:20022:tech:xsd:sct:pacs.008.001.02">
<GrpHdr>
    <MsgId>006MSID12511PH712</MsgId>
    <CreDtTm>2012-11-01T08:09:14</CreDtTm>
    <NbOfTxs>1</NbOfTxs>
    <TtlIntrBkSttlmAmt Ccy="EUR">20000</TtlIntrBkSttlmAmt>
    <IntrBkSttlmDt>2012-11-01</IntrBkSttlmDt>
    <SttlmInf>
      <SttlmMtd>INGA</SttlmMtd>
      <ClrSys>
        <Prtry></Prtry>
      </ClrSys>
    </SttlmInf>
    <InstgAgt>
      <FinInstnId>
        <BIC>RLBBAT2E083</BIC>
      </FinInstnId>
    </InstgAgt>
    <InstdAgt>
      <FinInstnId>
        <BIC>HELADEF1XXX</BIC>
      </FinInstnId>
    </InstdAgt>
</GrpHdr>
<CdtTrfTxInf>
    <PmtId>
      <EndToEndId>006SEOP23END1712</EndToEndId>
      <TxId>006SEOP231PH1712</TxId>
    </PmtId>
    <PmtTpInf>
      <SvcLvl>
        <Cd>SEPA</Cd>
      </SvcLvl>
    </PmtTpInf>
    <IntrBkSttlmAmt Ccy="EUR">20000</IntrBkSttlmAmt>
    <AccptncDtTm>2012-11-01T12:00:00</AccptncDtTm>
    <ChrgBr>SLEV</ChrgBr>
    <Dbtr>
      <Nm>Mrinmoy Sahu</Nm>
      <PstlAdr>
        <Ctry>FR</Ctry>
        <AdrLine>6</AdrLine>
        <AdrLine>Bangalore</AdrLine>
      </PstlAdr>
      <Id>
        <PrvtId>
          <Othr>
            <Id>E20809</Id>
            <SchmeNm></SchmeNm>
            <Issr>ORACLE CORP</Issr>
          </Othr>
        </PrvtId>
      </Id>
    </Dbtr>
    <DbtrAcct>
      <Id>
        <IBAN>FR7030087330086000000000591</IBAN>
      </Id>
    </DbtrAcct>
    <DbtrAgt>
      <FinInstnId>
        <BIC>CMCIFRPPXXX</BIC>
      </FinInstnId>
    </DbtrAgt>
    <CdtrAgt>
      <FinInstnId>
        <BIC>RLBBAT2E083</BIC>
      </FinInstnId>
    </CdtrAgt>
    <Cdtr>
      <Nm>Mrinmoy Sahu</Nm>
      <PstlAdr>
        <Ctry>FR</Ctry>
        <AdrLine>22 </AdrLine>
      </PstlAdr>
      <Id>
        <PrvtId>
          <Othr>
            <Id>F676869</Id>
            <SchmeNm></SchmeNm>
            <Issr>GOVT OF INDIA</Issr>
          </Othr>
        </PrvtId>
      </Id>
    </Cdtr>
    <CdtrAcct>
      <Id>
        <IBAN>FR7630087330086000000004266</IBAN>
      </Id>
    </CdtrAcct>
    <RmtInf>
        <Ustrd>abc</Ustrd>
      </RmtInf>
</CdtTrfTxInf>
</FIToFICstmrCdtTrf>
</SCTScfBlkCredTrf>
alter session set nls_numeric_characters = ".,";
      SELECT Msgid, Msgid1, Sttlmmtd
   FROM   data_table t,Xmltable(Xmlnamespaces('urn:S2SCTScf:xsd:$SCTScfBlkCredTrf' AS "A", 'urn:iso:std:iso:20022:tech:xsd:sct:pacs.008.001.02' AS "B")
                    ,'/A:SCTScfBlkCredTrf/B:FIToFICstmrCdtTrf' Passing t.data Columns
                    Msgid Path 'A:SndgInst'
                    ,Msgid1 Path 'B:GrpHdr/B:MsgId'
                    ,Sttlmmtd Path 'B:GrpHdr/B:SttlmInf/B:SttlmMtd');
MSGID             ;MSGID1           ;STTLMMTD         ;
                 ;006MSID12511PH712;INGA             ;
The idea was to :
1). Map the Column Names for the XPath built using the previous code.
2). Build the Select statement shown above dynamically based on the Xpath built in the previous code using a PLSQL block, and to process the data by doing a bulk collect on the XML.
The above XML may contain multiple <FIToFICstmrCdtTrf></FIToFICstmrCdtTrf> nodes.
Since the name space in the XML varies for each version of the SEPA messages , i need to get the names spaces ALSO to be picked up dynamically and parse the XML data based on the select statement as shown above.
Could you please guide me with
1). Is the approach taken appropriate?
2). Any alternative approach should be looked for ?
3). How to extract the name spaces available in the XML?
Thanks.

Interesting Reqrmnt - How to avoid sending namespace in the xml response

Hi,
Below is the XML response we generate and send it to HTTP Receiver.
- <ns1:CATSIMPORT xmlns:ns1="urn:pweh.com:erp:hr" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Version>1.0</Version>
<TrackID>{5A3C87A5-48FD-4BCD-9178-A200F10F118D}</TrackID>
- <ReturnCode>
<value>Success</value>
</ReturnCode>
</ns1:CATSIMPORT>
Can we remove the first and last line of the xml content and send it.
Please send in your suggestions or answers.
Regards,
Amar Nemalikanti

Hi Amareshwar,
Check my replies in this link.
just like java code to add a tag, you can use to remove a tag, before it goes to http adapter.
Re: How to change the incoming xml to a different namespace
Hope that helps you to fix your issue
Regards
Vishnu

Is there a way to change the xml message generated by JDeveloper Proxy

Hi,
I have created jax-ws proxy client using JDeveloper 10g. I need to change the generated xml message tags. I need to remove the namespace prefix tags from the xml message. For ex: the current request message looks like this:
<ns0:EMPLOYEE_NAME>John</ns0:EMPLOYEE_NAME>
should be
<EMPLOYEE_NAME>John</EMPLOYEE_NAME>
without the nso prefix.
How can I do that? Please help me.
Thanks.

To original poster, please just select "Problem Solved" to help any future questions about this.
Is there a way to change the text message ringer? No.
End of thread

Not able to view the XML Output, after Output format changed to XML

Hello Everybody...
After running the concurrent program having output type of XML. Output is not getting generated.
But getting generated when output type is changed to Text.
Please find the below log file info. :
BioReliance Receivables: Version : UNKNOWN - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XXBRAXINVNEW module: XXBio Print Selected Invoices New
Current system time is 28-MAY-2009 05:31:28
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
p_order_by='TRX_NUMBER'
p_trx_number_low='9859529'
p_trx_number_high='9859529'
p_installment_number='1'
p_open_invoice='N'
p_check_for_taxyn='N'
p_choice='SEL'
p_header_pages='0'
p_debug_flag='N'
p_message_level='10'
p_userid='9092'
XML_REPORTS_XENVIRONMENT is :
/oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oraapps2/devukora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Spawned Process 14380
REP-3000: Internal error starting Oracle Toolkit.
MSG-00100: DEBUG: AfterPForm_Trigger +
MSG-00100: DEBUG: Multi Org established.
MSG-00100: DEBUG: AfterParam_Procs.Get_Country_Details
MSG-00100: DEBUG: AfterParam_Procs.Switch_On_Debug
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_Low
MSG-00100: DEBUG: AfterParam_Procs.Get_Trx_Number_High
MSG-00100: DEBUG: AfterParam_Procs.Get_Tax_Option
MSG-00100: DEBUG: AfterPForm_Trigger -
MSG-00100: DEBUG: BeforeReport_Trigger +
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Printing_Option
MSG-00100: DEBUG: BeforeReport_Procs.Populate_Tax_Printing_Option
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Message_Details
MSG-00100: DEBUG: BeforeReport_Trigger.Get_Org_Profile.
MSG-00100: DEBUG: Organization Id: 102
MSG-00100: DEBUG: BeforeReport_Trigger.Build_Where_Clause
MSG-00100: DEBUG: P_Choice: SEL
MSG-00100: DEBUG: Choice is other than ADJ, setting ORDER BY.
MSG-00100: DEBUG: BeforeReport_Trigger -
MSG-05000: DEBUG: Trx No... 9859529
MSG-00010: 05:31 1 Transaction: 9859529
Report Builder: Release 6.0.8.25.0 - Production on Thu May 28 05:31:28 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 14767798 on node RCKBLADE05 at 28-MAY-2009 05:31:36.
Post-processing of request 14767798 failed at 28-MAY-2009 05:31:36 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
------------- 2) PRINT   -------------
Finished executing request completion options.
Concurrent request completed
Current system time is 28-MAY-2009 05:31:36
Please do the needful in resolving the issue.
Thans in Advance.
Abdul.

Hello Hussein,
Thanks.
Before I could ask the DBA to chage the DIPLAY parameter, I could see error in FNDOPP*.txt file, as some issue with tag "split-by-page-break".
Accordingly I removed the tag from the template file ( RFT File). Now the request is getting Completed with Normal status. And generating the PDF output.
I found a hit in the metalink for this issue, which suggests a PATCH 4206181 (XDO.5.5) to get this functionality.
Accordingly the PATCH is applied.
Now when trying to query the template name from the XML Publisher Administrator Responsiblity, page is getting errored with the below message.
====================================================================
oracle.apps.fnd.framework.OAException: Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME = TemplateFilesForViewVO2; APPLICATION_MODULE = oracle.apps.xdo.oa.template.server.TemplatesAM;
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1223)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1960)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:497)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:418)
     at oa_html._OA._jspService(_OA.java:86)
     at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
     at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
     at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
     at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
     at oracle.jsp.JspServlet.service(JspServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
     at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
     at org.apache.jserv.JServConnection.run(JServConnection.java:294)
     at java.lang.Thread.run(Thread.java:534)
====================================================================
Please do the needful in resolving the issue.
Thanks,
Abdul.

How to change the Hyper links color in the XML form

HI SDNs
Do u have any idea how to change the hyperlink color in the xml form. My requirement is as follows.I have created xml form by using xml template and i displayed this xml form by using Km document iview. I need tochange the hyper link color in the xml form content. I dont want to go for manual process by editing the xml form. because i have several hundreds of xml forms.
Appreciate if you give suggestion.
Thanks
Ramana

Hi Ramana,
The most convenient way to change the hyper links is by using the Theme Editor. Go to System Administration --> Portal Display --> Select Theme --> Component-Specific Styles --> Links --> Function/Result Link.
Hope this helps.
Kind regards,
Joost

How to Change the XML data that got stuck up in XI

Hi,
I am executing a scenario which sends the data from HTTP client>Xi->SAP(R/3 4.6).We are queuing the messages in XI, through QoS EOIO.Sender side we have configured the HTTP adapter and on receiver side we have configured RFC adapter.RFC at receiver side throws an exception, if I try to call rfc from XI by sending wrong data to it from HTTP client.The message which is failed gets stuck up in the queue , whose status will be shown as System Error.So, No messages will be further processed from that queue.
Our Requirement is, We need to manually change the xml file which is failed while trying to post data in to SAP.Could any one help me to find where the Failed xml file gets stored in XI and how can we change the file .
Regards,
Kiran kumar.

Mario,
This is possible from SP 19 onwards...
Have a look @
/people/gourav.khare2/blog/2007/02/28/sapxi--message-editing-150-responsibility-and-liability-150-sp19
Also, the comments in the blog. Really good
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/4a576b5b7430f3e10000000a11466f/frameset.htm
Regards,
Jai Shankar

I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

I recently reset my iPod touch 4th gen. (holding power and home buttons at the same time.) now it won't let me change my wallpaper, in the photo section or the settings. Any ideas, please? Thanks.

What happens when you try to change them?
Try:
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How can I change the name of the XML file which is submitted by mail?

Hello Everybody,
If I submit my pdf file as XML
I will get something like this:
MyFile.PDF -> submit as XML -> MyFile_data.XML
My problem is with the _data at the end of the file name -> this addition is coming from the windows logon language,
I know that because if the windows logon is in spanish I get the addition _datos for example: MyFile_datos.XML
Is there a way to change the name of the xml file for example : MyFile.XML
Thank you all in advance,
Eran

Hello Uti,
I found out it is something with the adobe reader installation.
If it is in English the suffix is _data
If it is in Spanish the suffix is _datos
If it is in Hebrew the suffix is _נתונים
So Now I think i will have to open OSS for this issue.
Thank you so much for your reply - I thought i was the only one with this problem...
Best Regards,
Eran

Changing the XML Structure in "Submit as XML"

Dear all,
We have two PDF Templates which are submitted via a WebService using Submit as XML. For both templates we need the same structured XML output.
Form 1 has the hierarchy like this (all subforms):
Company
Subsdiary
Responsibles
Footer
so the xml looks like
<creditrequest>
<company>...</company>
<subsdiary>...</subsdiary>
<responsible>...</responsible>
<footer>...</footer>
</creditrequest>
Form 2 has the hiearchy like this (all subforms):
Responsibles
Subsidiary
Company
Footer
and the xml looks like
<creditrequest>
<responsible>...</responsible>
<subsdiary>...</subsdiary>
<company>...</company>
<footer>...</footer>
</creditrequest>
So my question is how can influence the XML output order without changing the PDF hiearchy. This way I can change the XML output for Form 1 or Form 2 and both files would have the same XML structure to submit.
I have checked the presubmit event and the javascript API to change XML string programmaticly but I couldn't find any possiblity to read/write the XML to submit.
Thanks,
Koray

You can use JDOM and DOM. They are classes that load the XML File on memory and then you can modify it. I strongly recommend JDOM.

Changing the xml encoding from UTF-8 to ISO-8859-1

Hi,
I have created an xml file in xMII transaction that I feed into a webservice as input. As of now, the data in the xml file is entirely english text (it would be changing to have European text soon). I gave the encoding as UTF-8.
I get an error on the webservice side(not xMII code) that the its not able to parse. The error is 'SaxParseException: Invalid 1 of 1-byte UTF-8 sequence). I know that an easy fix is if tI change the encoding to iso-8859-1.
But the reference document doesnot let me put anythign other than UTF-8. Even if I put <?xml version="1.0" encoding="iso-8859-1"?> as the first line, when I save it and open it back, i see <?xml version="1.0" encoding="UTF-8"?>
Is there any way to change the encoding? Or better still, anyway idea why this invalid sequence is coming from?
Thanks,
Ravi.

Hi Ravi,
We have encountered scenarios where we needed to take the <?xml version="1.0" encoding="UTF-8"?> out completely. As xMII was providing the Web Service, it needed a workaround.
In your case, it seems that you wish to pass it from xMII to an external Web Service provider. One option might be to pass the XML document as string.
Once you convert it to a string, it may escape all XMl characters (i.e. '<' into '<'). You could perform a string manipulation and remove the <?xml version="1.0" encoding="UTF-8"?> from the string. You may also need to play around with xmlDecode( string ) function in the Link Editor.
I would suggest that before you try this option, create a string variable will the contents, but without the <?xml version="1.0" encoding="UTF-8"?> and try assigning it to the input.
You may also wish to try a string variable that has <?xml version="1.0" encoding="iso-8859-1"?> as the first line. If this works, you should be able to perform string manipulations to convert your XML document into this modified string.
Cheers,
Jai.

Changing Namespace section of the XML

Similar Messages

Maybe you are looking for