Changing network password...There are currently no logon servers available to service the logon request in Windows 8 and 8.1 Enterprise

We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?

Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support

Similar Messages

"Error Message" "There are currently no logon servers available to service the logon request"

Full Error Message
"(shared network name)is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permissions. There are currently no logon servers available to service the logon
request"
When trying to enter via "Map Network Drive" and click "Connect using different credentials", once entering the credentials, error
"The Network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share."
As I am not particularly tech savvy, am not the one who set up this network drive, I dont want to interfere with it too much. I simply want to be able to get a basic understanding of the issue. We had set up a previous share, since deleted, that allowed
us to have a shared folder to work on documents between the US and Ireland. This new share has been working fine up until yesterday, when we got the above error messages when trying to access the share. Later in the day, it just worked again. Today, I go to
open the folder and the same error messages turned up, what could be going on??

Hi Tomas,
Did your computer join the domain? How did you access that shared resource?
Please turn off your firewall temporarily and type the correct UNC address to access for test:
\\servername\sharename \file_path
If it doesn't work, use the IP address of the remote server when you try to connect to the network share.
Meanwhile, please read this reference:
Resolving Network Issues-You Might Not Have Permission To Use This Network Resource
http://blogs.technet.com/b/danstolts/archive/2011/06/21/resolving-network-issues-you-might-not-have-permission-to-use-this-network-resource.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

There are currently no logon servers available to service the logon request

I am trying to recover from a catastrophic SBS 2008 disk failure.
This machine was a stand-alone Domain Controller, and as luck would (NOT!) have it, both disks in a RAID1 configuration failed in rapid succession. Therefore, all I have is server backups to work with.
I have tried many permutations to get this data restored and the domain functional again, but so far, no dice.
I have successfully restored the system disk data from the most recent backup, but when I go to boot the system, I get a reboot loop. When I tell it not to reboot on error, it gives me:
S c00002e2 Directory Services could not start because of the following error: A device attached to the system is not functioning. Error Status: 0xc0000001. Please shutdown this system and
reboot into Directory Services Restore mode, check the event log for more detailed information.
When I reboot into Directory Services Restore Mode, the system quickly says that AD is clean, but doesn't take me to a command prompt, it takes me to the login screen. When I try to log in as Domain admin, it says:
There are currently no logon servers available to service the logon request
And I'm stuck. Unless I can somehow find out what the local admin credentials are, I can't get in to the system.
I have removed the disk and put it in a Hard drive enclosure, so I can access the files.
At first, I had some complaints about the disk driver, so I found the correct driver version from Intel to circumvent that problem when doing the restore.
I can boot from the installation disk, but I can't use wbadmin from there in the restore mode.
Right now, I'm trying an earlier backup, but something tells me I might have some real trouble here. This has turned in to quite the mess.
I have also tried reinstalling the OS to a new RAID array, but am loath to try putting the backup on there for fear I will be taken back to square one.
Do I have to start from scratch and recreate the domain and rejoin all the computers to it, or do I have a better alternative?
I have actually restored a SBS 2008 stand-alone DC from backup before, but that was RAID 5, so slightly different. I seem to remember having some driver headaches with that, but I did overcome them by getting into recovery and replacing the driver files
on the disk. Tried that here, but still no luck.
HELP!!!!

Hi
Please chek these articles and follow step by step procedures;
http://blogs.technet.com/b/sbs/archive/2010/06/11/how-to-perform-a-bare-metal-restore-on-small-business-server-2008.aspx
http://blogs.technet.com/b/sbs/archive/2011/03/31/how-to-perform-an-authoritative-system-state-restore-in-sbs-2008-2011-standard.aspx
https://technet.microsoft.com/en-us/library/cc771290(v=ws.10).aspx
also you need to directory services restore mode(DSRM) password for restore AD DS.if you dont know
check this article how to reset it;
https://support.microsoft.com/en-us/kb/322672?wa=wsignin1.0

"There are currently no logon servers available to service the logon request." when trying to access a shared folder in domain environment.

Hi,
I already have a windows server 2003 working as a Primary Domain Controller (PDC) and now I created another windows server 2012 to work as an Additional Domain Controller (ADC).
- PDC is doing (Active directory domain services + DNS + DHCP)
- ADC is doing (Active directory domain services + DNS)
For testing purposes, I shutdown the PDC and let the ADC up and running. Now, Whenever I try to access a shared folder on any server in the domain, I got this message "\\x.x.x.x is not accessible. You might not have permission to use this network resource.
Contact the administrator of this server to find out if you have access permissions.
There are currently no logon servers available to service the logon request."
Actually, the replication of AD objects and DNS records between the PDC and ADC is done successfully. I also can resolve names using the ADC's DNS. Also, I can ping servers hosting the files I want to access.
Appreciate your help.

The PDCe is required for a lot of services, to include DFS.
Turn the PDC back on and try again. If it's still not working, ensure the file server has the correct DNS entries on the NIC.
I think I see what you were trying to test. The issue is that not all DCs are equal. Yes, they hold the same information, but some DCs do extra work. That is why FSMOs exist.
Let me know how it goes.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

Trying to process cube on server erroring with No Logon servers available

I am trying to deploy my cube on a remote server for the first time.
I used the deployment wizard to build an XMLA script which I successfully ran on the server.
The datasource is set up to use my network credentials to login. This works fine when I run the cube locally.
However after running the XMLA script and I try to process the cube, I get the error :
There are currently no logon servers available to service the logon request.
I don't know much about windows security, and am stumped as what to do next.
Not sure if I am doing anything right as this is my first BI project, is there a better way to deploy and update the cube?
Or recommended settings.
Any help would be much appreciated.
Thanks
Jon

Hi,
Here are some troubleshooting steps. Take a look into the following screen.
In order for the cube to process, the data warehouse database used in Connection String (This is defined in cube's data source) should have data read access against the target Data Warehouse database. To troubleshoot this click on the Test Connection button.
It should return "Test Connection Succeeded" message. If the message is an error which means current windows log-in does not have access to the Data warehouse database. Normally in production environments there is a dedicated windows account to do
these kind of work.
1 - Create a windows User Account which has relevant access permissions.
2 - Grant permission to access the Data Warehouse database to that user (Read access would enough)
3 - In SSAS Server Add this account as Server Administrator. To do that follow the following screenshot.
4 - Once this is done browse the data source of the SSAS database (<Your SSAS Database>\Data Sources\<Your Data Source Name>) and click properties (This is also in the very first screenshot)
5 - Click on "Impersonation Info" under Security Settings (This is also in the very first screenshot)
6 - Out of four options in that screen choose "Use a specific Windows user name and password"
7 - Enter the User ID and password you created for this purpose and click OK.
8 - Perform the "Test Connection" procedure (mentioned in the very biging of the post) and you should be good now.
9 - Process the cube and you should be able to process it without any errors.
Best regards...
Chandima Lakmal Fonseka

Issue accessing share from other forest. No logon servers available to serve your request.

Hello, gents!
We have two AD forests and external 2-way trust between them. About month ago I was able to reach share on fileserver from localdomain.com to remotedomai.com without any issues. Now when I am trying to do it I have an error
"\\servername\share is not available.You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
there are currently no logon server available to service the logon request".
I validated trusts - everything validating fine.
In the event log of remote server, I am trying to access I found this error EventID 4625 from Microsoft Windows Security:
An account failed to log on.
Subject:
Security ID: NULL SID
Account Name: -
Account Domain: -
Logon ID: 0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: artem
Account Domain: localdomain
Failure Information:
Failure Reason: An Error occured during Logon.
Status: 0xc000005e
Sub Status: 0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ANOMDC1
Source Network Address: 172.20.0.10
Source Port: 53693
Detailed Authentication Information:
Logon Process: NtLmSsp
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
What would be the proper steps to troubleshoot it?

See what is the status/substatus and see which number correspod to your system
Status and Sub Status Codes
Description (not checked against "Failure Reason:")
0xC0000064
user name does not exist
0xC000006A
user name is correct but the password is wrong
0xC0000234
user is currently locked out
0xC0000072
account is currently disabled
0xC000006F
user tried to logon outside his day of week or time of day restrictions
0xC0000070
workstation restriction
0xC0000193
account expiration
0xC0000071
expired password
0xC0000133
clocks between DC and other computer too far out of sync
0xC0000224
user is required to change password at next logon
0xC0000225
evidently a bug in Windows and not a risk
0xc000015b
The user has not been granted the requested logon type (aka logon right) at this machine
Regards
Milos

There are currently no logon server

Hi, when a computer joins a domain, by the time that this user has been using the computer for sometime his/her credentials should be cached on the computer for offline access, right? But why some of our users experienced "There are currently no logon
server" error message. The only solution is for them to come back in the office to tap to the network but how about for remote users? Is there a backdoor we can set so that this user can access. We don't want to give the local administrator password since
we used this only for installations, etc.
Thanks
Jeff

Hi, when a computer joins a domain, by the time that this user has been using the computer for
sometime his/her credentials should be cached on the computer for offline access, right?
Right if the user is not connected to the network and your DCs cannot be reached.
To make this work, you need to make sure that cached credentials are not disabled: http://www.itworld.com/article/2779749/windows/how-to-disable-credential-caching-on-client-computers.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

HT4623 Could not activate cellular data network. You are not subscribed to a cellular data service" "Cellular Data Plan Usage-There is no data remaining on your current plan. Would you like to add more data now?"what is the best thing i can do with this p

Could not activate cellular data network. You are not subscribed to a cellular data service"
"Cellular Data Plan Usage…There is no data remaining on your current plan. Would you like to add more data now?"what im going to do whit this problem??

I have done that and it is definitely on. My husband has the exact same phone and I upgraded his IOS at the same time, but this problem is not happening to his phone (we are also on the same plan, so our service should be the same). Our settings appear to be identical and my phone is showing the 3G symbol at the top, so I can't understand why it won't access the network.
I've turned it on and off twice and have reset all settings with my iTunes account, but it still isn't working.
I'm not a complete idiot with this sort of stuff - I have tried all the obvious things.

Is this normal? "There are currently no approval tasks assigned to you."

Our site owners encounter the following situation:
- We are using sites based on "Publishing site with workflow" template.
- We have used Owners (Permission Level=Full Control) for site managers and Visitors (Permission Level=Read) for everyone on domain. We also did not add usernames directly, but instead used an AD group (which was added to the SharePoint Owners group).
- There is currently no users in Approvers (Permission Level=Approve) group.
In this situation when someone from Owners grope creates a page and clicks Submit, he sees Approve and Reject buttons. However he is not able to Approve either Reject and gets "There are currently no approval tasks assigned to you".
I have added the AD group we have used for Owners to Approvers group, the site manages still were not able to Approve (with same error message).
The situation finally got fixed after I have added a user directly with his username to the SP Approvers group. Adding any user directly with his/her username fixes this partially: then the task is indeed created, but someone from Owner group (that was not
in Approvers group when task was created) still can not approve by clicking on Approve button, but he can take over the Task from Task List and then approve...
To my knowledge all this happened because there was indeed no approval task created (that is what actually error indicates). But still I am little bit confused about 2 things:
- Why someone with Full Control permission can not approve/reject a page (in the end that is just an item from the list with a workflow activated on it)
- Why there were no task created (I would expect that if there is no one in Approvers group, the tasks would be created for other users with Approve permissions, for example through Full Control right; also situation when there was an AD group is strange,
why not to create a task assigned to that AD group).
Just wondering about other thoughts on this behaviour.
Thanks in advance!
Tofig

Hi Tofig,
As you rightly said, this behaviour is by design.
As far as I understand, the owners need not be given the approver permission considering them to be mostly from technical background. They may not necessarily be good at content authoring and design and keeping them away from the approver group may
avoid any language related goof-ups (punctuations, grammatical errors etc.)
On the other hand, if they are good at content authoring, the site owners can be included in the Approver group, to avoid getting this message. This message also goes away once any of the user under Approver group, approves the changes.
Cheers :)
LM

Can't connect computers to printer (b210) via network because there are "other networks"

I can't connect computers to printer (b210) via network because there are "other networks matching your network name". This makes no sense at all. I have several Apple devices (iPhone, iPad, iMac) all with the latest software. The printer works fine when using the USB connection to my iMac. Nothing I do seems to solve this problem (rebooting, re-configuring, etc.). Help.

Hi Cgold,
If there are other networks matching your network name, then the printer will have issues connecting when you run the wireless setup wizard.
However, there are other options:
If your router supports 'Wi-Fi Protected Setup' with either a button to push on the router, or a pin to enter, you can choose that connection option under the wireless menu on your printer.
or
Change the network name that your router is broadcasting within the web page of your router (NOTE-this would force you to re-join all wireless devices back to the new network name you have created).
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

My iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no issues. i have reset network settings

my iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no connectivity issues. i have reset the network settings but that did not help. the issue started last week when the second iphone was introduced to the house, could this be the cause?

No.
Any problem connecting your iPhone to any other wi-fi network besides your own?

I have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed

i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
Adam

Well, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt

My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to hose sons anymore. Is there a way to sync my Touch with my new

My Laptop was stolen. On the Itunes, I had many songs saved from other sources, that are currently on my Itouch. Itunes wants me to Erase to sync, and I dont want to erase. I have no access to those songs anymore. Is there a way to sync my Touch with my New laptop withoit erasing my I touch?

Syncing to a new iTunes library or computer will erase your iPod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Do this:
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved:iTunes: About iOS backups
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manuaaly changed. All updates are current.

My ipod nano 7th gen. will not advance to the next song, it will keep playing the current song until manually changed. All updates are current.

I had this issue with my 6th generation nano. It was driving me nuts, until I realized that somehow locked the repeat button on. Selecting one song rather than a selection will cause whatever song you have selected to play over and over and over and over..

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
Louisa

Hi, l have the same problem, were you able to resolve?

Changing network password...There are currently no logon servers available to service the logon request in Windows 8 and 8.1 Enterprise

Similar Messages

Maybe you are looking for