There are currently no logon server

Hi, when a computer joins a domain, by the time that this user has been using the computer for sometime his/her credentials should be cached on the computer for offline access, right? But why some of our users experienced "There are currently no logon
server" error message. The only solution is for them to come back in the office to tap to the network but how about for remote users? Is there a backdoor we can set so that this user can access. We don't want to give the local administrator password since
we used this only for installations, etc.
Thanks
Jeff

Hi, when a computer joins a domain, by the time that this user has been using the computer for
sometime his/her credentials should be cached on the computer for offline access, right?
Right if the user is not connected to the network and your DCs cannot be reached.
To make this work, you need to make sure that cached credentials are not disabled: http://www.itworld.com/article/2779749/windows/how-to-disable-credential-caching-on-client-computers.html
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Similar Messages

"Error Message" "There are currently no logon servers available to service the logon request"

Full Error Message
"(shared network name)is not accessible. you might not have permission to use this network resource. contact the administrator of this server to find out if you have access permissions. There are currently no logon servers available to service the logon
request"
When trying to enter via "Map Network Drive" and click "Connect using different credentials", once entering the credentials, error
"The Network folder specified is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share."
As I am not particularly tech savvy, am not the one who set up this network drive, I dont want to interfere with it too much. I simply want to be able to get a basic understanding of the issue. We had set up a previous share, since deleted, that allowed
us to have a shared folder to work on documents between the US and Ireland. This new share has been working fine up until yesterday, when we got the above error messages when trying to access the share. Later in the day, it just worked again. Today, I go to
open the folder and the same error messages turned up, what could be going on??

Hi Tomas,
Did your computer join the domain? How did you access that shared resource?
Please turn off your firewall temporarily and type the correct UNC address to access for test:
\\servername\sharename \file_path
If it doesn't work, use the IP address of the remote server when you try to connect to the network share.
Meanwhile, please read this reference:
Resolving Network Issues-You Might Not Have Permission To Use This Network Resource
http://blogs.technet.com/b/danstolts/archive/2011/06/21/resolving-network-issues-you-might-not-have-permission-to-use-this-network-resource.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Changing network password...There are currently no logon servers available to service the logon request in Windows 8 and 8.1 Enterprise

We currently are running Windows 7 in our enterprise environment. Everything works as expected when the user tries to
change their network password via crtl+alt+del, change a password. We are now testing and trying to deploy Windows 8.1 to a test group and are running into an issue when any AD user tries to change their network password. The user can logon to the
PC just fine when the PC is on the domain, however as soon as they go to change their password they are getting the error "There are currently no logon servers available to service the logon request". The end result is that the user can not change
their password. We tried this via connected to the dock with a network cable, on corporate wireless, with a Windows 8.1 machine completely patched over with all Microsoft patches, and a Windows 8.1 machine that is not patched and are running into the same
issue. Has anyone ran into this? Is there something that has to be changed on the infrastructure side?

Hi,
Please check the following KB:
Error message when you try to log on to a Windows Server 2008-based RODC: "There are currently no logon servers available to service the logon request"
http://support.microsoft.com/kb/949048
To configure the Password Replication Policy for an RODC, a member of the Domain Admins group is required.
By default, RODC's do not cache any user or computer passwords, neither a user or computer will be able to authenticate. You can however specifiy that their passwords be cached either by including a group or specific user in the Password Replication Policy
on the RODC at the remote site.
RODC - Password Replication Policy and Password Cache Management
http://blogs.dirteam.com/blogs/paulbergson/archive/2010/09/22/rodc-password-replication-group-management.aspx
Password Replication Policy Administration
http://technet.microsoft.com/en-us/library/cc753470(v=ws.10).aspx
For further information about the Windows Server side, I suggest you ask Windows Server forum:
https://social.technet.microsoft.com/Forums/en-US/home?category=windowsserver
Karen Hu
TechNet Community Support

There are currently no logon servers available to service the logon request

I am trying to recover from a catastrophic SBS 2008 disk failure.
This machine was a stand-alone Domain Controller, and as luck would (NOT!) have it, both disks in a RAID1 configuration failed in rapid succession. Therefore, all I have is server backups to work with.
I have tried many permutations to get this data restored and the domain functional again, but so far, no dice.
I have successfully restored the system disk data from the most recent backup, but when I go to boot the system, I get a reboot loop. When I tell it not to reboot on error, it gives me:
S c00002e2 Directory Services could not start because of the following error: A device attached to the system is not functioning. Error Status: 0xc0000001. Please shutdown this system and
reboot into Directory Services Restore mode, check the event log for more detailed information.
When I reboot into Directory Services Restore Mode, the system quickly says that AD is clean, but doesn't take me to a command prompt, it takes me to the login screen. When I try to log in as Domain admin, it says:
There are currently no logon servers available to service the logon request
And I'm stuck. Unless I can somehow find out what the local admin credentials are, I can't get in to the system.
I have removed the disk and put it in a Hard drive enclosure, so I can access the files.
At first, I had some complaints about the disk driver, so I found the correct driver version from Intel to circumvent that problem when doing the restore.
I can boot from the installation disk, but I can't use wbadmin from there in the restore mode.
Right now, I'm trying an earlier backup, but something tells me I might have some real trouble here. This has turned in to quite the mess.
I have also tried reinstalling the OS to a new RAID array, but am loath to try putting the backup on there for fear I will be taken back to square one.
Do I have to start from scratch and recreate the domain and rejoin all the computers to it, or do I have a better alternative?
I have actually restored a SBS 2008 stand-alone DC from backup before, but that was RAID 5, so slightly different. I seem to remember having some driver headaches with that, but I did overcome them by getting into recovery and replacing the driver files
on the disk. Tried that here, but still no luck.
HELP!!!!

Hi
Please chek these articles and follow step by step procedures;
http://blogs.technet.com/b/sbs/archive/2010/06/11/how-to-perform-a-bare-metal-restore-on-small-business-server-2008.aspx
http://blogs.technet.com/b/sbs/archive/2011/03/31/how-to-perform-an-authoritative-system-state-restore-in-sbs-2008-2011-standard.aspx
https://technet.microsoft.com/en-us/library/cc771290(v=ws.10).aspx
also you need to directory services restore mode(DSRM) password for restore AD DS.if you dont know
check this article how to reset it;
https://support.microsoft.com/en-us/kb/322672?wa=wsignin1.0

"There are currently no logon servers available to service the logon request." when trying to access a shared folder in domain environment.

Hi,
I already have a windows server 2003 working as a Primary Domain Controller (PDC) and now I created another windows server 2012 to work as an Additional Domain Controller (ADC).
- PDC is doing (Active directory domain services + DNS + DHCP)
- ADC is doing (Active directory domain services + DNS)
For testing purposes, I shutdown the PDC and let the ADC up and running. Now, Whenever I try to access a shared folder on any server in the domain, I got this message "\\x.x.x.x is not accessible. You might not have permission to use this network resource.
Contact the administrator of this server to find out if you have access permissions.
There are currently no logon servers available to service the logon request."
Actually, the replication of AD objects and DNS records between the PDC and ADC is done successfully. I also can resolve names using the ADC's DNS. Also, I can ping servers hosting the files I want to access.
Appreciate your help.

The PDCe is required for a lot of services, to include DFS.
Turn the PDC back on and try again. If it's still not working, ensure the file server has the correct DNS entries on the NIC.
I think I see what you were trying to test. The issue is that not all DCs are equal. Yes, they hold the same information, but some DCs do extra work. That is why FSMOs exist.
Let me know how it goes.
- Chris Ream -
**Remember, if you find a post that is helpful, or is the answer, please mark it appropriately.**

I have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed

i have acquired windows office 2011 for my macbook but unable to open it. There are currently 3 files in the folder, 1 of which seems to be the actual program which is a hfs file. iv tried looking for programs to help me open it but failed.
when double clicking on the image it says unable to open and gives me the option to search the app store.
any help would be much appreciated
Adam

Well, first, just make sure it's the Mac version and not the Windows version (which indeed would not run on your Mac). You say "Windows Office" which is why I mention it. I think you probably just mean "Microsoft Office" though.
Next, is this on a disk (DVD), or did you purchase and download it from the Microsoft site?
Matt

Is this normal? "There are currently no approval tasks assigned to you."

Our site owners encounter the following situation:
- We are using sites based on "Publishing site with workflow" template.
- We have used Owners (Permission Level=Full Control) for site managers and Visitors (Permission Level=Read) for everyone on domain. We also did not add usernames directly, but instead used an AD group (which was added to the SharePoint Owners group).
- There is currently no users in Approvers (Permission Level=Approve) group.
In this situation when someone from Owners grope creates a page and clicks Submit, he sees Approve and Reject buttons. However he is not able to Approve either Reject and gets "There are currently no approval tasks assigned to you".
I have added the AD group we have used for Owners to Approvers group, the site manages still were not able to Approve (with same error message).
The situation finally got fixed after I have added a user directly with his username to the SP Approvers group. Adding any user directly with his/her username fixes this partially: then the task is indeed created, but someone from Owner group (that was not
in Approvers group when task was created) still can not approve by clicking on Approve button, but he can take over the Task from Task List and then approve...
To my knowledge all this happened because there was indeed no approval task created (that is what actually error indicates). But still I am little bit confused about 2 things:
- Why someone with Full Control permission can not approve/reject a page (in the end that is just an item from the list with a workflow activated on it)
- Why there were no task created (I would expect that if there is no one in Approvers group, the tasks would be created for other users with Approve permissions, for example through Full Control right; also situation when there was an AD group is strange,
why not to create a task assigned to that AD group).
Just wondering about other thoughts on this behaviour.
Thanks in advance!
Tofig

Hi Tofig,
As you rightly said, this behaviour is by design.
As far as I understand, the owners need not be given the approver permission considering them to be mostly from technical background. They may not necessarily be good at content authoring and design and keeping them away from the approver group may
avoid any language related goof-ups (punctuations, grammatical errors etc.)
On the other hand, if they are good at content authoring, the site owners can be included in the Approver group, to avoid getting this message. This message also goes away once any of the user under Approver group, approves the changes.
Cheers :)
LM

My iPad is showing 315 unread messages on one of my email accounts. There are none on the server(comcast), none show on iPhone or PC. How do I get rid of this notification.

My iPad is showing 315 unread messages on one of my email accounts. There are none on the server(comcast), none show on iPhone or PC. How do I get rid of this notification.

IPad4, sorry

HT4914 On itunes, if an Album is supposed to have 10 songs, there are currently 40 songs.? Would imatch correct problems like those?

My music file in / on itunes is messed up. If an album is supposed to have 10 songs, the system (itunes) has duplicated them at least 4 times so where an album is supposed to have 10 songs, now there are 40 songs. How can I correct errors like those? And, would imatch correct problems such as those? Please help! Thank you!

Due to the nature of the how the service works you should not expect a 100% match rate for anything, even if it is available in the iTunes Store. This is the simple reality.
The most probable reason you are seeing what you are seeing is due to the mastering of the version of the music in your iTunes library and what is available in the iTunes Store. Let's take The Beatles catalog for example. I own the Capital Albums remaster collections from 2004 and 2006. The Beatles official catalog was remastered and re-issued in 2009. Many of the tracks on the '04-'06 discs actually match to the '09 remastered tracks available in the iTunes Store because they the waveforms are similar enough that iTunes deems them a match. This is the opposite of what you describe because I actually do not want any of the tracks from these albums to match to anything in the store. I would prefer them to all be uploaded. But that isn't the way it worked. The mastering of the album can have a huge impact on what matches or not.

We're sorry, but there are currently no solutions available in your location.

i am trying to set up a repair my iphone online, but always get we are sorry , but there are no solutions available in your location,
any body got any idea where is the problem
thanks

If I had to guess, I'd say that you live in a contry where the iPhone is not available... but since you don't tell us where you are or where the phone came from, we can only guess...

Is there Time machine compatible PC server software?

I'm a photographer and running a dual hard drive Macbook Pro and I've reached the point where my NAS backup drive is not big enough for Time Machine to backup to. In order for me to upgrade the backup drive I'm looking at about £500 ($750) as I need one big enough not just big enough.
I have an old PC that is currently running Windows Server and is connected to my network, which obviously isn't Time Machine compatible. As buying HDD is cheaper than pre-boxed NAS drives, I wanted to use this instead.
Is there any server software that is compatible with Time Machine and I can use to build a home server? If not, I'd best start saving and hope my laptop doesn't crash or get stolen.
Thanks in advance.

No, there's no supported means to target archival storage onto a Windows box with Time Machine.
As you're likely aware, Time Machine only supports specific devices as targets, and the file server are currently OS X Server, Time Capsule devices, and the most recent generation of AirPort Extreme devices with attached disks. Not Windows Server boxes, Linux or other gear.
More than a few folks and a few discussions and various hackery have allowed random devices to appear to work (and it's possible your NAS device has seen this same hackery), but whether those configurations will continue to work or will react appropriately during the inevitable network and device glitches is very far from certain. Among these sequences, whole-disk installs and related system restorations are key, but are also something that doesn't necessarily get thoroughly tested.
A Mac Mini running OS X Server can host a fair amount of connected storage, if you decide to replace or supplement your NAS.
For more information on Time Machine, start reading here.
It is possible to roll your own backups and to use third-party tools to perform the backups onto remote devices, and one of the more common recommendations here are based on a command line tool known as rsync. Copy your files over, and either acquire or custom-create your own archival processing. (If you're interested, search for previous discussions of rsync and backups for some of the available options, and there are tools and scripts available. rsync is pretty ugly to get going initially — it's arcane — but it works pretty well, and various folks have already figured out the syntax and posted example scripts.) Carbon Copy Cloner is an alternative to Time Machine, and there are others.
On the subject of creating your own custom software for these and related tasks, it's also possible to use software that targets photo studios and their related processing, and that manages the photos and videos and other assets, and that can manage backups and related processing, and various of these will deal with reprints and purchases and related. That's a bit further along than a backup device or a Time Machine backup, but it's something that might replace the requirements. (You probably don't care nearly as much about OS X and most other stuff here as that can be re-downloaded or reinstalled, it's your photos and your customer data that are key here, and that are not replaceable. That stuff is the core target for your backups.)

When i click on my launch pad icon on the dock, and it opens, there are no photo icons only words!! Any body know how to get picture icons back ???

When i click into my launchpad on my dock, and it opens, there are currently no picture icons only words. How do i get my picture icons back?? plase help

This procedure will reset the state of LaunchPad to its default. Any customization that you did will be removed.
Back up all data.
Triple-click the line below to select it:
~/Library/Application Support/Dock
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu.* A folder should open. Inside it are one or more files with long names ending in ".db". Move those files to the Desktop, leaving the folder open. Log out, log back in, and test. If there's no change, put the files you moved back where they were, overwriting the ones that may have been created in their place. Then log in and log out again. Otherwise, delete the files you moved.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Is there a R3 table to track who are currently logon into SAP portal?

Hey, Gurus,
Is there a R3 table to track who are currently logon into SAP portal?
Thanks inadvance!
Fisher

What I am trying to accomplish is that we have a customized SAP web dynpro program with Java that access R3 data.
I would like to create a lock in R3 to prevent the record in R3 being accessed by more than one person.
The problem was that in our customized portal programs will not always exit gracefully and the lock will not be cleared correctly all the time.
If there is a way that I can access the user logon data in portal (java stack), I will try to figure out how to unlock the record after the person exit.
Thanks!
Fisher

Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

Dear Sir or Madam,
I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
I bought.
However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on. I have also discovered from running Health
Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below.
I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up. I also have the server set to suspend when not in use with the Lights
Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process? I'm also concerned that these errors will cause me later problems with storage pools and
the like at a later date - the disk replication one seems particularly worrying. Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
on my home network). The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
had fully booted up and re-asserted its network settings. Is this another symptom of the same problem? I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
By way of background - there isn't another server in my home network. This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
server. I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
trial. Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance?
I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
version the new key on the original MBR set up. I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time. That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
laptop will boot from cold in a few seconds into Windows 8.
Yours faithfully,
Avon
======
Health Report extract.
Critical Errors in Event Logs in Last 24 Hours
DFSR
Event ID: 3221226674
The DFS Replication service failed to contact domain controller to access
configuration information. Replication is stopped. The service will try again
during the next configuration polling cycle, which will occur in 60 minutes.
This event can be caused by TCP/IP connectivity, firewall, Active Directory
Domain Services, or DNS issues.
Additional Information:
Error: 160 (One or more arguments are not correct.)
Last occurrence: 26 May 2014 18:51:28
Total occurrence(s): 2
DNS
Event ID: 2147487661
The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
Last occurrence: 26 May 2014 18:51:15
Total occurrence(s): 2
ADWS
Event ID: 3221226674
This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
Last occurrence: 26 May 2014 18:51:08
Total occurrence(s): 2
NTDS General
Event ID: 2147486534
The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
are performed on a cleartext (non-SSL/TLS-encrypted) connection. Even if no clients are using such binds,
configuring the server to reject them will improve the security of this server.
Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
and will stop working if this configuration change is made. To assist in identifying these clients, if such binds occur this
directory server will log a summary event once every 24 hours indicating how many such binds
occurred. You are encouraged to configure those clients to not use such binds. Once no such events are observed
for an extended period, it is recommended that you configure the server to reject such binds.
For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
You can enable additional logging to log an event each time a client makes such a bind, including
information on which client made the bind. To do so, please raise the setting for the "LDAP Interface Events" event logging category
to level 2 or higher.
Last occurrence: 26 May 2014 18:51:00
Total occurrence(s): 2
=======

Hi KerguelanAvon,
Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
1. Please refer to the following article and troubleshoot slow boot.
New Slow Logon, Slow Boot Troubleshooting Content
2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
Regarding to those critical Errors in Health Report, please perform
Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
DFSR Event 1202 (DFS Replication)
Hope this helps.
Best regards,
Justin Gu
Hi Justin,
I'm reading through the links you referred me to but it's taking a while. In the meantime I tried running BPA as you suggested. I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
more detail.
Now it says
Problem:
The DNS client is not configured to point only to the internal IP address of the server.
Impact:
If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
Resolution:
To resolve this problem:
1. From the client computer, open the Properties page for the network connection.
2. Make sure that DNS is configured to point only to the internal IP address of the server.
Except that it is.
Connection-specific DNS Suffix:
Description: Broadcom 802.11n Network Adapter
Physical Address: ‎00-1B-B1-28-AE-63
DHCP Enabled: Yes
IPv4 Address: 192.168.1.133
IPv4 Subnet Mask: 255.255.255.0
Lease Obtained: 03 June 2014 21:56:49
Lease Expires: 05 June 2014 20:24:20
IPv4 Default Gateway: 192.168.1.1
IPv4 DHCP Server: 192.168.1.1
IPv4 DNS Server: 192.168.1.49
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
IPv6 Default Gateway:
IPv6 DNS Server:
I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
Thanks, Avon.

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

There are currently no logon server

Similar Messages

Maybe you are looking for