Changing sender id for mail from vf03
Hi Experts,
When I send a billing document from VF03 to a customer, the e-mail address is read from my sap user (SU01). I would like an e-mail address for each billing type, but I don't now how to change "mail_sender" parameters in the smartforms (ZRLB_INVOICE program).
Can you help me, please?
sharing piece of code , where i think could make a difference ,
PERFORM set_print_param USING ls_addr_key
ls_dlv-land
CHANGING ls_control_param
ls_composer_param
ls_recipient
ls_sender
cf_retcode
here the sender is is_sender : DATA: ls_sender TYPE swotobjid.
swotobjid - structure contains
LOGSYS
OBJTYPE
OBJKEY
DESCRIBE
i dunno how it has 2 b changed. right now i guess it's getting filled with user name data from su01.
Thanks.
Arun
Did you check the subroutine set_print_param. This sub routine should tell you the logic on how the data for sender is used. Use your own custom logic to fill the sender.
Similar Messages
-
When I try to send e-mail I get an error message stating that the e-mail address was rejected by the server. When I send to e-mail from another address, I get back an error saying the e-mail address is unknown. My e-mail has worked fine for years until yesterday. HELP!
The specific text of the error message is very important here — I'm not sure exactly you're encountering here.
If you're able to connect to your email server and are able send email to other email addresses and if the failures are specific to one email recipient address, then please contact the intended recipient of the failing email, and confirm their address is valid. (This is the way I'm reading your question.)
If you are unable to send any email to any other email addresses and this is specific to your email address, then try the web mail client interface (if one is available) to verify your login user and password, and check with your email ISP for assistance. If your email password works via web mail, follow this Apple troubleshooting guide, then — if everything else fails — I'd probably then entirely remove the email account from Mail.app and re-add it per your email ISP's particular setup requirements. (Some issue with the setup or maybe a corrupt setting in OS X or a problem at the mail ISP servers is a common problem, but this effects attempts to send to all email addresses via that account.)
An email account setup is specific to an email provider, unfortunately. If you're using one of the more common email ISPs, then there are usually setup guides and frequently-asked questions posted online. -
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
Well, that's it really. I need to send an e-mail from an account for apple mail to retrive new incoming mail.
This has started happening since I upgraded to Mavericks. It's very temperamental. Some days it needs massaging to get my mail (as per above), other days it works like a well-oiled machine.
Any thoughts anyone?If no one replies here try the Java Mail Forum:
http://forum.java.sun.com/forum.jspa?forumID=43 -
How to send an e-mail from a store procedure
Hi,
I need to find a way to send an e-mail from an store procedure every time a table is fetched.
Is there a way to accomplish this task?. The e-mail should only display the rows in the table (no more than 5 rows) on a daily basis.
Any help or example any of you can provide, it's greatly appreciated.
Thanks
EdWith Oracle 10g you can use UTL_MAIL to send mails.
For earlier versions see the sample code on OTN
http://www.oracle.com/technology/sample_code/tech/pl_sql/htdocs/Utl_Smtp_Sample.html
Use DBMS_JOB to schedule the sending of the mail -
Can I send group e-mails from an IPad?
Can I send group e-mails from an IPad?
Demo wrote:
Not without a third party app. You can search for apps in the App Store that can email to groups. Here a couple of them.
http://solubleapps.com/mailshot/
http://www.redbits.com/iphone/groupemail/en/
Actually, by tapping the , you can add multiple people.
-Ethan -
I can't send hotmail e-mails from my IPad. My id and passwords are correct
I can't send hotmail e-mails from my IPad. My ID and password are correct.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Using a POP account with multiple devices
http://support.apple.com/kb/ht3228
iOS: Adding an email account
http://support.apple.com/kb/HT4810
iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
http://support.apple.com/kb/ht1694
iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
http://support.apple.com/kb/TS1944
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say “Cannot Connect to Server”?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
How to Delete Email on the iPad
http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
How to Mass Delete Emails from iPhone and iPad Inbox (with video)
http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
How to add, send and open iPad email attachments
http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
How to Sync Contacts with Your iPad Using iTunes
http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
Importing a Contact List CSV to the iPad
http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iCloud: Create a group and add contacts to it
http://support.apple.com/kb/PH2667
eMail Groups - You can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
How to delete an email account on your iPad
http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
Cheers, Tom -
BASIS Configuration needed to send an external mail from SAP Program
Can you please help me about the BASIS configuration needed to send an external mail from SAP Program?
Regards,
SubhasishHi Subhasish,
Please go thru the below link.
Re: SCOT Configuration--for external mail
Regards,
Lakshman. -
Contact conflict when sending an e-mail from Mac
I would like to address an issue after sending an e-mail from my Mac computer. The contact changes to the previous name that I had given in the past and its being added to the new one. The result is to have a contact with many names.Is there any solution to this problem?
Thank you in advance,
MenelaosI hadn't realised it was more than one contact.
The following article(s) may help you.
Resolving duplicate contacts -
Help me plz. Sending an e-mail from chain process.
Hello.
I have a problem with sending an e-mail from chain process.
Ive created success message with text:
Theme: test.
Body: test body.
The chain process is completed successfully.
After that Ive seen my inner messages in Sap menu.
The theme of my message is test. Its ok.
The body of my message is test body and a big system log. It isnt ok.
A want to switch off a system log.
How I can do it?Hi,
we created a dummy abap as last step of each pc-chain and created the msg from this last step.
e.g.:
*& Report ZBW_DUMMY *
*& Dummy Program *
*& Does nothing, only for ending process of a processchain *
REPORT ZBW_DUMMY.
write:/ 'End of Dummy', sy-datum, sy-uzeit.
*****************************************************************msfecit
/manfred -
I want to send my yahoo mail from bookmarks as an icon to the desktop
I want to send my yahoo mail from bookmarks in Firefox as an icon to the desktop
Well as I suspected I love OWC company I pulled out the mac hard drive , they offered me a Macdrive free trial program to check your drive on PC Windows and yesSSSSSSSSSSSSSSSSSSSSSSSS it all there nothing lost
woohooooo , thank you but nothing is dead, when you have faith , this was a prayer answered big time I wanted a pro so much and I get to use my 500 plust 250 plus 120 GB drives all of them
ladies and gentlemen and I get to keep the 2 GB in from my macbook 13 inch and sell all the parts
yipeee
thanks for the support, now the case is Solved. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! -
I'm using Labview to send an e-mail from outlook and everytime I got a dialogue box which inform that a software is trying to send an e-mail. To send this e-mail I have to confirm operation. How can I avoid this dialogue box ?
I don't know what code you're using but the attached VI works with my version of Outlook and doesn't have any pop-up messages. I downloaded it from somewhere a while ago but don't remember where it was from.
Attachments:
Email_sender.vi 54 KB -
I attempted to send a bulk mailing from my Filemaker Pro 10 database. There were two bad addresses in the mix and mail continues to paint the attempts on my screen. I have force quit the program but when I open it again, it goes back into the loop and paints messages until the program crashes. How can I stop the emailing?
Start off by trying to reset the ipad. Press and hold the power and home buttons at the same time until the device powers down and you see the Apple logo.
-
I Recently changed the password for mail, on iMac. I can still read my mail, but the drop down keeps appearing, asking for my password, then telling me it's incorrect. Totally confused.
If your password is accepted, and Mail connects to the account, but you're prompted for the password repeatedly, take each of the following steps that you haven't already tried. Note: these steps don't apply if the server rejects the password. That's a different problem.
Step 1
When prompted for the password, check the box marked Remember this password in my keychain.
Step 2
Check that the keychain is working.
Step 3
Check that the default keychain is unlocked. -
Send connector - e-mails from two domains to distinct anti-spam IPs
I have an Exchange enviroment that has two domains. I want that e-mails sent from a domain do the relay to an anti-spam, and e-mails sent from another domain do the relay to another anti-spam.
Example:
I need to config send connector to send the e-mails from "test1.com" to IP 10.160.190.66 and from "test2.com" to IP 10.160.190.69
How do I do?
I need this because each domain uses distincts anti-spam
Tks.Hi,
Before going on, I would like to confirm the following information.
What's the version of the Exchange?
Whether the two domains have their own Exchange or share one Exchange?
Thanks
Allen
Maybe you are looking for
-
Cannot send anything- no error message
Hello, I can't send emails anymore, I receive emails just fine though. I don't even get an error message! It just says that it is copying the message to the out box and it stays that way for ever. I cannot quit the application either but can only for
-
All my events in my calendar have disappeared after it updated! Please help!
Thunderbird updated and now all my events are gone! I updated lightening, but the events are still missing. I have a blank calendar.. My Thunderbird is 31.1.1 My lightening is 3.3.1 Thank you
-
Installing Windows 7 Upgrade Edition on a new Macbook Pro
Hi all, I am a recent convert to Apple after becoming more and more disillusioned with Windows for the past 10 or so years. I have ordered a shiny new 15" 2011 MBP and can't wait for it to arrive! My issue is that I am going to need to install Window
-
I've tried searching around the forums to see if anyone has had this similar problem AFTER replacing the hard drive in their ipods. Of course there are tons of people with similar issues, and the responses are always "replace the hard drive", so I'm
-
Mountain Lion freezes for few seconds when closing tabs
Hi all, When closing tabs on Google Chrome, usually after "heavy" navigation (HD flash video or several pdfs opened for examples), Moutain Lion sometimes freezes for less than 10 seconds and then back to normal. The trackpad is still responsive but I