Changing something in the Informations

Hello, I hope that someone can help me. I will change something in the name of one Titel. But when i open the "Information" than I can't change anything. But in the past it was possible.
Kind regards
Michael

If all you're using Lightroom for is to organize your library I can't see any reason for you to upgrade, unless it's for camera compatibility. With Lightroom, if you're going to rename a folder it's best to do that from within Lightroom. On Windows, all you have to do is right-click on the folder name and choose the Rename option. You have to realize that your photos are not "in" Lightroom. Lightroom simply references your images wherever you have put them on your hard drive. The folder name is a key element in keeping track of where the images are located. If you change the folder name and don't use Lightroom, then you have broken the link that enables the program to keep track of things.
But all is not lost. If you change the name of the folder outside of Lightroom, the folder will display as missing in your library tree. On Windows, all that is necessary is to right-click on the missing folder and choose the option to update the folder location. Then you can browse to where the images are now located, choose that location and everything is really going to again.
In my opinion, you are missing out on a lot of wonderful features in Lightroom using it the way you are. However, you know your workflow much better than I.

Similar Messages

  • HT201320 i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

    i wanted to email my messages history in Viber. But the phone says I can't because I have to change something in the settings. Could someone please tell what to click in the settongs?

    How could anyone tell you what settings to change when it's not clear what settings you're referring to?

  • Did Gingerbread change something in the corp sync email

    Corp sync now downloads the calendar events only, no email, says certificate error

    Droid X - Corp Sync provisioning errors
    Problem:
    Software Release 4.5.596 enhances the response for several policies providing greater customization of the Exchange environment. These enhancements improve Enterprise capabilities and the level of encryption and Exchange Active Sync support is now more robust. Please use this FAQ for a best case practice for configuration.
    Scope:
    This solution applies to Exchange 2007 and 2010 environments.
    This document is directed to an IT Exchange Admin familiar with modifying the Exchange ActiveSync policy(s) that apply to customer mailbox(s).
    When  the phone is updated to the 4.5.596, the phone may experience a Provisioning Error with the Orange triangle on the status bar (Account Name provisioning error, Please contact server admin) and the Corp sync accounts are no longer communicating with the Exchange Server.
    When setting up a new account on a Droid X with software update 4.5.596, the phone displays an error message:  Error, The device cannot be provisioned on this server.  Please contact the server's admin and the account never completes the set up.
    Resolution:
    When the Exchange Activesync policy setting is configured with "Allow non-provisional be devices" unchecked, make sure the Exchange Active Sync settings below are selected.
    Password Tab:   
    Allow Simple Password (see note below on securing device)
    Device Tab:     
    Allow Removable Storage
    Allow camera
    Allow Wifi
    Allow Internet sharing from device
    Allow remote desktop from device
    Allow Bluetooth Handsfree Only
    Advanced Tab in Exchange 2007:
    Allow Browser
    Allow consumer mail
    Device Application Tab in Exchange 2010:
    Allow Browser
    Allow consumer mail
    Those policies are not supported at this time and causing the provisioning problem.
    Additional information:
    Definitions of Allow Simple Password and Minimum Password Complex Characters:
    Allow Simple Password Exchange ActiveSync policy - this policy allows IT administrators to prevent user from creating passwords containing only repeating or sequential characters (like "abcd" and "11111")
    Minimum Password Complex Characters Exchange ActiveSync policy - allows IT to specify how many non-letter characters should be included in the password in addition to letters.
    Motorola Mobility Response on these issues:
    The Allow Simple Password Exchange ActiveSync policy is not supported on the device and device would not connect to Exchange servers requiring this policy to be enabled. However, this device does support Minimum Password Complex Characters policy which if enabled on the server supersedes the Allow Simple Password setting.
    Motorola Mobility is considering adding feature support for all of the Exchange Active sync policy settings in the future.

  • HT4310 I have the ipod shuffle. It only holds a charge for about 45 minutes.  Is this normal or do I need to change something with the settings?

    I have the ipod shuffle.  It only holds a charge for about 45 minutes.  Is this normal?

    It's not "normal," but lithium batteries wear out over time and eventually are not able to hold a charge, and that is "expected."
    So, if the iPod shuffle is a few years old, and you used it a lot, the battery may be worn out.  If it's brand new (or less than one year from purchase date, you should have it checked under warranty.

  • ICACLS permissions set... but dont apply without change something in the ACL by hand

    Hello guys,
    I wrote a script for setting up permission on fileserver resources.
    icacls \\server\Client1 /grant "Browsing Group":(S,RD,X,RA,REA,R)
    icacls \\server\Client1\Supervisor /grant "Special Permission This folder only Group":(X,RD,RA,REA,WD,AD,WA,WEA,DC,RC)
    icacls \\server\Client1\Supervisor /grant "Special Permission Subfolder and files
    Group":(OI)(CI)(IO)(M,DC)
    So browsing rights working fine... But the user can´t see the folder Supervisor...(I see the applied perissions on the ACL on folder Supervisor)
    If I add a  custom group/user by hand to the ACL on Supervisor the user are able to see the folder and also have the needed permissions.
    I can also uncheck one special perission from a applied group, add it again and click on OK... then the user are able to see the folder and also have the needed permissions.
    Thank you in advance.
    Kind regards,
    Tim
    MCITP, MCTS, MCSA
    http://directoryadmin.blogspot.com
    This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
    "If this thread answered your question, please click on "Mark as Answer"

    Hi Tim,
    Would you please tell us how many users have this issue?
    I suggest you uncheck all the permissions on this folder manually, then use
    icacls command to test again.
    If some other groups contain some specific users, and these groups are assigned
    Deny access permissions, then these users cannot access the file. That’s because
    Deny permissions’ precedence is higher than Allow, also,
    explicit permissions’ precedence is higher than inherited ones.
    Therefore, please check other groups and the explicit permissions on this folder.
    Here are some related links below:
    How Permissions Work
    http://technet.microsoft.com/en-us/library/cc783530(v=WS.10).aspx
    How IT worksNTFS Permissions
    http://technet.microsoft.com/en-us/magazine/2005.11.howitworksntfs.aspx
    Best Regards,
    Amy Wang

  • Hello. I'm usin Aurora 7.0a2 and Firefox 5 web browsers. The Windows Media Player 11 plug in doesn't work in Aurora, but it does in Firefox 5. Should I change something in the configuration of Aurora? or just wait a new upgrade?. Thank you very much.

    With Aurora 7.0a2
    Online radios like: http://www.amdelplata.com/envivo.html
    Show a mesagge: "Additional plugins are required to show all content of this page", and there is no sound.
    With Firefox 5 it works good.

    With Aurora 7.0a2
    Online radios like: http://www.amdelplata.com/envivo.html
    Show a mesagge: "Additional plugins are required to show all content of this page", and there is no sound.
    With Firefox 5 it works good.

  • How can I get my phone to stop deleting my changes made in Address book without deleting the changes made on the iPhone?

    On my old Macbook whenever I would sync my iphone, if I had changed something on the calendar it gives me the option to choose between the computer event or the iphone event (so lets say I'm out and I changed the time of my appointment on my phone, when I get home and sync my phone I choose to keep the time I changed it to on my phone, not what's on my computer).
    Now... what's happening is I'm getting the message: syncing your contacts will change more than 5% of the contacts on the COMPUTER. So that means, all the bulk changes I just made in address book on the computer are going to get deleted and replaced with what is originally on the phone. That's not what I want. I want to change what's on the phone with the changes I made on the computer in address book. Make sense? How do I do that? Because I don't necessarily want to wipe out everything on the phone because I don't know if that has been transferred to the address book... So If I added some phone numbers within the last month (i don't remember the last time I synced my phone), then I would loose them if I chose to replace information on the phone with what's on the computer (there's an option to do that under info when syncing).
    Does that make sense? Please let me know it this is at all confusing. I'm really trying to resolve this before Saturday early morning ... My mom is going out of town and it's her work phone, so I need to figure this out for her. Thanks a bunch!

        mnjclark,
    I'm glad to hear that you have found a work-a-round so that your device works while making calls meanwhile being connected to Bluetooth to your automobile.
    At this time, based on the way the device was manufactured, there is no setting available that will allow this change to be permanent. When the device is rebooted, the settings may be adjusted which will require you to manually change back to CDMA only mode if needed.
    EfrainM_VZW
    Follow us on Twitter @VZWSupport

  • ADF :  Value change listener for the whole jsff page

    Is there any feature to have a value change listener for the whole jsff page ?
    How to know if user has change something in the page i.e. how to know whether the page is dirty ?

    User please tell us your jdev version!
    Read this blog https://blogs.oracle.com/groundside/entry/ever_wondered_how_uncommitteddatawarning_works
    Timo

  • Do I need to redeploy and run tomcat every time I�m changing something?

    Guys,
    I�m using MyEclipse as the IDE to develop struts application. I am a newbie to this topic (but doing just fine)
    Anyway, I do this:
    I write my code, deploy it, run Tomcat and than I click the site to see the results.
    sometime I am changing the words or the code and than want to see the changes, for this, and this is the point I think I do wrong, I STOP Tomcat, Redeploy, START tomcat and refer back to the site (imagine the how long it takes)
    Is there a better way only to redeploy so everything will take effect immediately?
    Why when I change something in the AppliatinResources it doesn't kick in?
    Thanks

    I use MyEclipse and Tomcat and changes are reflected within a few seconds after making changes without redeploying.
    I have noticed that when adding servlets and modifying servlets, it takes a few seconds for changes to show while the context reloads.

  • Changing values in the design_dialog component doesn't reflect in other pages

    Hi All,
    I have created a design_dialog component and I included the component in some pages (browse page, product page,...). Whenever I make changes in the component in the browse page the changes is not reflecting in the other page (product page) i.e. the design dialog component, even though both the pages are sharing the same component. However the changes are available in different product pages like product page A, product page B but not in the browse page.
    Is there any way that I can make this component globally across the site, so if I change something in the design dialog component of browse page, the other page which has the same component should gets updated.
    Thanks
    CQ Beginner

    Hi,
    Design dialog changes will be applied to all the pages which are created using the same template. it wont apply if you are dropping the same component on the page which is created from differnet tempalte. That means it is at template level not at the site level.
    If you want to maintain some thing at the global level; which should apply to all the pages wherever you dropped this component irrespective of which template it uses you need to do small tweak.
    When you author any component through its dialog it stored the data by creating node on the page node --- that means it is applied to that page only
    When you author any component through its design dialog then it stores data in etc/designs/<your-site-name>/etct etct --- that mean it applied to all the pages which uses this design
    Change the path of the component so that it stores data at global level. then it should apply across your site.

  • Changing file names in the Information Pane

    Why doesn't changing the names of photographs in the Information Pane also change the name of the files in the iPhoto Library folder??
    If I import photos direct from my camera, the photos are stored with generic file names (like DSC_006) in the Original Folder and the Data folder in iPhoto Library folder. Once stored there, I understand that if you move, delete or "rename" any of those files "in the Finder" that iPhoto may not thereafter be able to see them.
    But I don't understand why if you change those file names in the Information Pane from within the iPhoto application, why the actual file names in the Original and Data folder aren't correspondingly changed.
    I would prefer to eliminate the generic file names and presently the only way that I can do that is to simply transfer the photos from the memory cards, change the file names and then import the files into iPhoto.
    This seems like an unnecessary step.
    Am I missing something here?

    If you want the capability of editing the original file names they you'll need to upgrade to a more professional application like iView MediaPro. Aperture doesn't let you change the original file names from within the application.
    If you need to the use file outside iPhoto with the same name as the Title in iPhoto then you can do just as PhillyPhan pointed out, export to the Desktop using the User Title option.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant

    why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end.  Constant rendering means its almost impossible to edit anything. Please help.

    H TheGamer
    What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
    Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
    Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
    I am not approving or disapproving of this project feature, just commenting on the what is.
    This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Please consider.
    ATR
    Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

  • Changing something in "Informations"

    Hello, suddenly I can't change something from my Music. I will change, for example, something in the name from the artist but when i cklick to "informations" all data is written only in grey and I can't change something. I hope so much that someone can help me. I have iTunes9 and Windows Vista. The m4a-titels are on an external LW

    In iTunes, right-clcik the file and choose "Show in Windows Explorer." When you see it in Explorer, right-click again and choose "Properties." If the box for "Read Only" is checked, click it.

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • HT5622 I changed my Apple password and I get the information at the wrong email address.  The correct email shows in my Apple account.  Why is the mail going to the wrong email? How do I fix it?

    I changed my Apple password and I get the information back at the wrong email address.  My email address is right under my Apple ID.  How do I get this corrected?

    AWDunams wrote:
    Okay so I associate the e-mail address as the apple ID and that seems to be a wrong assumption.  I did go to my Apple ID and changes the e-mail address and the password but for the same and only Apple account I have ...
    That is good.  In that case, your one and only account has not changed, just the login credentials you use for it.  All your previous purchases will remain associated with that account, and the new login.
    In essence, an AppleID is an email, but it has two parts.  One is the login email address and password everyone traditionally thinks of as an AppleID.  But that in turn is linked to an account with Apple.  As long as you use the manage Apple ID portal to just change the email address and/or password for your exisiting AppleID, then the internal account tracks along with those changes as well.
    However, on your iOS devices, you will need to log out and then log back in with the new login credentials:
    settings -> iTunes & App Stores - tap your AppleID, and choose log out.  Then log back in with the new email address and new password.

Maybe you are looking for