Changing the Decimal Notation of Invoice Smartform

Hi Gurus,
Is there a way to change the decimal notation of Standard Invoice Smatform "LB_BIL_INVOICE" ?
I want to change the decimal notation of Smartform from "1.234.567,89" to "1,234,567.89".
Please reply.
Points will b awarded...
Thanx in Advance..

there are 2 ways that you can set these
1. Go to SU01, change the defaults Decimal Notation to X 1,234,567.89
2. If you have done 1st step, the notation still didn't change, put the below code in the initialization of smart forms:
SET COUNTRY ' '.
These should solve your problem.

Similar Messages

  • Changing the Decimal Notation

    Hello Experts,
    We have a request to change the decimal notation of values. Please consider the below example.
    Value: 450000 (Four lakhs and fifty thousand)
    Actual Decimal Notation in the syetm is 450,000.00 (In thousands)
    Expected Decimal Notation: 4,50,000.00 (In Lakhs)
    Please advice where to set this up in the system.
    Thanks in advance,
    Regards,
    Sekar

    Dear,
    Please go to Systems>User Profile>Own data,
    It will open a screen for your user ID, now go to Default Tab and change the decimal Notation as per your requirement.
    Hope this helps!!!
    Br,Vivek

  • Changing the Decimal places in the currency

    Hi all
    we are using the currecy SAR. Decimal places was set to 4, now that they want to revert back to 2 decimal places. i understand that by doing so they would be inconsistencies in the data allready recorded. how to avoid that?
    is there any programmes / reports that would fix such inconsistencies?
    any OSS notes?
    thanks and regards
    gkk

    HI,
    You should NOT change the decimal places in a productive system.
    If you would do, the correction of the posted documents afterwards would be a remote consulting issue. Which you have to pay for SAP.
    You see, all posting you have done until now, would get displayed in a wrong way, and the new posting wouldn't compare to the others.
    Please check the note 137626 describes this.
    If you really need to change the decimals, you should create a new currency type, for example your current is SAR, and now you should create a SA2. Then you should enter new rations and exchange rates for it, and work with the new one.
    Also if you want to set the decimals to two digits from four, youshould not enter an entry in the OY04(TCURX).
    In this table you can only enter a value, that discriminate from 2 decimals. If there is no entry in the table, it means the currency has two decimals.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

  • Change the decimal places of a field in screen table control

    HI ,
    I have a MENGE field having data element as , BSTMG (decimals 3 ).
    This field MENGE , I have used in a table control. The value in this field is filled from a custom Z-table where the same data element BSTMG is used. So , for eq.) value in MENGE field is shown as 6.010
    But the requirement is that the value should be displayed as only 2 decemals i.e.)   6.01
    I dont want to change the domain of the field in the Z-table , to 2 decimal places , because the table is used in other developments also , so it will give a dump there which I have to correct in other developments also.
    So , is there any way to change the decimal places of a field in screen table control , without changing the domain , in the table from where the value is fetched... ????
    Edited by: abhijeet_7013 on Feb 14, 2011 3:18 PM

    Hi, create a structure in local program with same field names and change the TYPE with some 2 decimal domain of MENGE. Populate this local stucture and use it in TABLE CONTROL.
    Hope this helps...
    Cheers

  • How may I to change the slpcode in a invoice?

    I need to change the slpcode in a invoice.
    Regards.
    Oscar

    Then it would not be possible. Only on Open invoices can you change the Sales Person.
    If you really want to ..then you need to reverse the Payment (if it is a payment that closed the Invoice)..then change the Sales Person (as the invoice will become available - OPEN) and then process payment again

  • Can we change the  payer details in invoice

    hi gurus
    can we change the  payer details in invoice??
    points awarded
    kishore

    Hi Kishore,
    No, we cannot change the Payer in Invoice.because who ever the payer maintained in the sold to party that will appears here.
    Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Changing the Decimal in the currencies

    Hi,
    We have an issue related to our SAP Production system.
    At the time of raising Billing invoices to customers in USD currency,
    we are using currency SAR with  two decimal places currently. Now our requirement is to bring three decimal places to USD currency for another project. new project also in the same lanscape .To proceed further i need to achieve this change in existing settings and test the impacts. so it is a cross client change (oy04)it will be seriously effected to our production system. Whether it will be suggested for changing the TCURX table?  as these change is a urgent requirement for our new IS Oil
    project, as in the SAP note : 434349 and 137626 it is clearly mentioned that it will affect the already posted documents , I need to know what are the other impacts and is there any other way to do the same.
    Regards
    Sanj
    Edited by: Sanj S L on Feb 21, 2012 11:26 AM

    Yes changing the currency decimal in IMG in the midway is not at all recommended.  Instead, you can differentiate the same in pricing condition itself.  Say for example, currently if you maintain price per piece, you can maintain per ten or hundred so that system will calculate the exact net value.
    G. Lakshmipathi

  • ME13-Difference in the decimal notation in amount in conditions

    Dear All,
    I get this issue in the conditions of ME13(PIR). The value in the database(KONP-KBETR) has 2 decimal places, whereas in the screen, decimal notation is not present. i.e., the value looks like being multiplied by 100. This is present only in one system. The other system shows the value as it is in the database. This is common for all users.
    How can I change this? Is it some screen setting? Please help.
    Thanks,
    Sumanth

    The database always stores the values with 2 decimals, but  dependend on the currency settings the SAP programs that show the values to the user (except they are using SE16)  or calculate values, or printing puchasing documents   will take care to show it in the right form.
    If you develope your own programs, then you have to take care about this by yourself.

  • How to change the Quantity in Excise Invoice where PART1&2 are posted

    Dear Gurus
    I have a PO with 2 Qty
    Where i have received GR for  1 QTY with excise invoice for 1 Qty
    now the User is done GR for 2 Qty with excise details of 1 where Part 1&2 are posted
    now i want to change the quantity from 2 to 1 in Excise Document and the GR
    how to solve this issue
    Please help me

    Hi,
    As you needed, 1st reverse GR document in 102 Movement type in t.code: MIGO and cancel the excise entries with t.code: J1IEX, go for post and then cancel for excise amount with entering Rejection Code in miscellaneous TAB.
    Regards,
    Biju K

  • I need to change the decimal sign from a ,  to a . in a worksheet - please help!!

    Im fresh from a Windows background and struggling to get started on the NUMBERS program - I need to change the ,  to a . for decimal numbers (the NUMBERS program does not seem to recognise the . but when I change the separator to a ,  it works - problem is that I have many exsiting Excel worksheets in which I used the .   There is no way that I want to redo all these worksheets so I need to change NUMBERS so that it recognises a . as the decimal separator and not the ,     Please help!!

    I don't know the iOS behavior so I will answer for OSX.
    At this time, on your machine, Numbers use the decimal comma.
    This means that your system is set to behave this way.
    Enter the System's Preference Pane entitled "Language and Text" and customize the number's format.
    In this screenshot you may see the default French settings.
    Replace the comma by the period in both "Decimale" fields then restart the machine.
    The system will use the decimal period and Numbers will do too.
    Assuming that one day you want to revert to decimal comma, no problem, revert the system's setting.
    Numbers will be fair enough to adapt itself to the new state.
    In fact, it store decimal numbers in the English format : decimal period and adjust on the fly according to system settings.
    Yvan KOENIG (VALLAURIS, France)  mardi 22 janvier 2011 18:03:45
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How to change the decimal places in the value axis of a chart in WAD?

    Hello,
    The key figure in my chart has 2 decimal places and I want the value axis to show the same. How to do that?
    Thanks in advance, Nathalie

    Hi,
    change the Format property of the ValueAxis-Line to 0.00
    Then the axis displays its values including two digits after the decimal.
    Regards, Kai

  • BAPI to change the posting data of invoice document

    Hello All,
          I need a BAPI to change the posting date of the invoice document (Type : RE, Generated from MIRA transaction). Do let me know if you can across a BAPI to do it.
    Thanks,
    Siva.

    BAPI_INCOMINGINVOICE_CHANGE

  • In a pages table change the decimal point to a comma

    I live in Italy and love it. However, there are issues. One that you might be able to help me with is changing the usual decimal point in a table to a comma. In Italy they use a comma for separating change from dollars instead of the usual decimal point.

    Scott Fox wrote:
    I live in Italy and love it. However, there are issues. One that you might be able to help me with is changing the usual decimal point in a table to a comma. In Italy they use a comma for separating change from dollars instead of the usual decimal point.
    I apologize but _*in many countries*_ the usual decimal separator is not the decimal point, it's the comma.
    It's time to understand that American habits aren't the universal rules or ways of life !
    I'm not saying that American habits are bad, just that they are local ones, not better than others.
    Yvan KOENIG (VALLAURIS, France) mercredi 30 septembre 2009 16:01:23

  • Changing the Decimal places for Percentage in cost distribution in SC

    Hi Gurus,
    Is it possible to change the number decimal places for the Percentage field in cost Assignment tab in Shopping cart in cost distribution option?
    The user wants 3 decimal places, currently we can enter only 2 decimal places.
    I have gone thro' couple of blogs which are talking about changing the price decimal and not the percentage field decimal. (in IMG setting: General settings > Currencies > Set Decimal places)
    So, if anyone come acorss this issue, please let me know.
    Thanks and Regards,
    Nowsath

    Decimal Places Factor of the Receiver Weighting Factors
    Specifies the number of valid decimal places with which the given weighting factors are valuated.
    Example
    You enter 123456 as the weighting factor. Depending on the factor, this number is interpreted as:
    Factor Decimal places Weighting factor
    1 0 123456
    10 1 12345.6
    100 2 1234.56
    1000 3 123.456
    10000 4 12.3456
    100000 5 1.23456
    1000000 6 0.123456
    Please check with your FICO consulant .what settings you have in backend system.
    http://help.sap.com/saphelp_nw04/helpdata/en/bb/bdbdc4575911d189240000e8323d3a/frameset.htm
    Muthu

  • How do I change the decimal separator from a comma to a dot in numbers? I upload my bank statements into numbers and all contain dots. Numbers does not understand the dots.

    Hi,
    I am a recent convert from Exell to Numbers.
    I have downloaded my bank statements to Numbers. The bank statement uses dots as decimal separators, whilst the Numbers default is a comma.
    I need to change the Numbers format to dot to avoid having to manually change all in the downloaded spreadsheet.
    This spreadsheet also includes my currency as R (ZAR Rands), so either need to remove these or get Numbers to understand it, again to avoid having to remove/change all manually.
    Would really appreciate your help.

    Hi,
    Thanks for your response. Have figured it out with the help of Ross at the V & A Waterfront Apple Store.
    System Preferences- Language and Region- at the bottom of the box click "Advanced"- then choose the dot/ comma under Number separators- Decimal and again under drop down box "decimal" under currency.
    Regards
    Teana

Maybe you are looking for

  • Error In report Server

    Hi, I want help, my report server 10 G is running very well. But when I run a report with many rows,it was take several time to run.And I have this error. UTL_HTTP.REQUEST_FAILED; WEB SERVER IP ADDRESS = myadresse ERR : ORA-29259: end-of-input reache

  • Setting the Charset for outgoing mail in Mail

    When I send mails to windows-systems, the Outlook program gets the message with wrong characters. Especially of course the special danish characters, but also other information goes wrong. F.ex. grey lines hows up where I certainly did not put it! I

  • Account Balance not showing correctly

    Sir, Suppose , i have posted an invoice  of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So,  accout balance of this customer should be zero.. But when i see the account balance from business partner

  • Doubt in precedence

    hello, i have a doubt in the order in which a sql query will execute. when there are joins and where conditions in an sql query, which would be executed first? the joins or the where conditions?? Regards, Roopa.

  • Use PI as "Application System" instaed of "Integration Server"

    All, i have quite complicated scenario in which: message is sent ECC > XI, this mesage triggered number of sub-interfaces XI>OraDB (via jdbc), each sub-interface activate DB stored procedure (which returns large data volumes). all returned data shoul