Changing the default value of "Items Due" in iProcurement 11.5.9

Is there anyway of changing the default value of 'Today' that appears in the Item Due field when doing an expanded search on Receive Items? We would like this set to 'Any Time' which is more useful to us.
Is there anyway of changing the default value of 'Today' that appears in the "Requisition Created" field when doing an expanded search on Requisitions in iProcurement? We would like this set to 'Any Time' which is more useful to us.
We are on 11.5.9
Thanks in advance...
Regards,
Sajid

You should be able to do that, read my reply on this thread below on iProcurement page customization in 1159.
Adding item to exiting AK Region
Thanks,
Tapash

Similar Messages

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

How can I change the default value in IT0009?

Right now in our system when we create a new IT0009 entry, several fields are defaulted such as the payee name, bank country, and currency (field WAERS). But in table T588Z I can not find anything defined for IT0009. Now even I create entries in T588Z ex. as
0009 WAERS 06 10 W P0009-WAERS='USDN'
the currency still shows up as 'USD' when I create a new record. Can anyone tell me where the field 'WAERS' is defaulted as 'USD' and how can I control this?
Thank you very much.
Best regards,
Johnson

Hi Johnson,
Correct me if I am wrong,You need to default a value, so i guees you would need to use the feature P0009 not the dynamic action. If you could let meknow the current structure of the p0009 feature, may b i could help you figure the could-be structure of the p0009 to default the required value.

To change the default value in approval column of Approve time data view

Approve working times in MSS
For a manager:
Approval view in approve time data iview has a column with name approval. The value is defaulted to approve all. Can any one let me know how to change this value.
Or point me to any documentation which will be of help with this.
ESS BP Version 1.41
ECC 6.0 EHP4
Thanks,
John.

Hi John,
uncheck the mass approval option in the Timesheet config.
Cheers!!!
Umang

How to find a BADI to change the default value of a Web Dynpro Screen?

Hello Experts!!
My requirement is as follows-
The SAP cProjects Distribution Functions screens default the Calculation Base to Per Day(This is represented via the initially-selected value in a listbox). The requirement is to make it deafult to the current standard Per Month (This also appears in the list box).
Is there any BADI to achieve this?
I tried putting a debug point in the Get_Instance method of the class cl_exithandler to find all the BADIs associated with the screen. I got a bunch of BADIs with no luck. And now I am not even able to debug anymore as the debuger is not opening. Can anybody tell me why this is happening? It was working two days before. And yes I have read all the posts about debugging a web dynpro application and I am doing everything that is mentioned there- I have set an external debug point and I have checked the "IP Matching" checkbox against my name in the workbench, but, with no luck
Any help on this will be greatly appreciated.
Thanks and Regards,
Smitha

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Changing of default values on the selection screen dynamically

Hi,
      I have 2 radiobuttons R_A & R_B and i have one text field like P_TEXT. Based on selection of radio button i have to change the default values in P_TEXT on the selection screen. like if i select R_A i have to display P_TEXT = 'A'. if i select R_B then it has to display P_TEXT = 'B'. I tried like as below
in AT SELECTION-SCREEN OUPUT EVENT.
             IF R_A = 'X'
               P_TEXT = 'A'.
             ELSEIF R_B= 'B'.
               P_TEXT = 'B'.
             ENDIF.
        But it's not working. it is working only for first radio button. when i select second radio button it is not giving the second value. can any one tell the sol.
Tks in advance.

Hi Pammi,
Use this code, its working:-
PARAMETERS : r_a RADIOBUTTON GROUP gp1 DEFAULT 'X' USER-COMMAND rb,
             r_b RADIOBUTTON GROUP gp1,
             p_text(20).
"we use user command with the radiobutton so that some event is occured in order to call AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT.
IF r_a = 'X'.
    p_text = 'Hello'.
ELSEIF r_b = 'X'.
    p_text = 'Hi'.
ENDIF.
In the above case 'AT SELECTION-SCREEN OUTPUT' will act as PBO of the selection screen and will change value of selection text as per condition.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Can I change the default settings for InfoView?

Hi,
I have a Crystal Reports Server 2008 running. The users access their reports via the InfoView web application.
In this application each user can configure some settings, like whether to use the Acrobat Reader or an ActiveX control for printing. Due to the fact that most users are not experts, is it possible to change the default values for all users by administration?
Regards
Joern

This was previously answered in an older thread. Hope this helps you...
How to set default preferences for all users in Infoview 3.1/CRS 2008
Posted: Feb 13, 2009 9:57 PM
Click to report abuse... E-mail this message Click to reply to this thread Reply
It took me a few tries to figure this out, so I thought I would share the steps I took to accomplish this.
This was successful for InfoView Preferences for a Crystal Reports Server 2008 application (XI 3.1 base).
1. Download the jsp files here: http://service.sap.com/bosap-supportsw
Choose BusinessObjects Enterprise > * > Samples >
"How to set preferences for all users at once in BO XI R2"
2. Extract the files and rename logon.jsp to setpref.jsp
3. Copy the downloaded jsp files to your root Infoview webapp folder (where the wars deployed to). We use the default - Tomcat. The Infoview webapp is deployed to C:\Program Files\Business Objects\Tomcat55\webapps\InfoViewApp\ If this is you, copy to here.
4. From your browser launch http://crystalreportshost:8080/InfoViewApp/setpref.jsp (your infoview link) and follow the instructions!

How can I validate a dropdown box to NOT accept the default value?

I have a fillable form where I need the user to select their "Number of Employees". I have added several ranges as their options in a dropdown box (1-10, 11-25, 26-50, 50+). My issue is the "defult value" is set to "1-10" and people submit it without changing it to the correct value.
I have changed the default value to "--Select One--", but it still lets them submit the form with that value entered.
I am assuming I need some sort of validation script that will basically say - "If the value in this field is --Select One-- do not submit the form, but give an error that says 'please select your number of employees" or something along those lines.
Basically I just want them to pick something as opposed to just submiting it with the default value.
I have looked all over and am not very good with JS.

You can not have the default value set to a real possible value. You need a value that should be selected.
Then for your submit script you need to test all of your required fields to make sure they are not at the default value.
You make a variable that assumes all the required fields are completed and then check each field and if any one still has the default value you set your variable to "false" and then when you have checked all the fields you test your variable's value and only if it is true to you submit the form.
var bSumbit = ture; // logical variable for submission test
// test drop down # of employess
this.getField("Number of Employees".).required = false; // clear required property
if(this.getField("Number of Employees".).value == "--Select One--") {
bSubmit = false;
this.getField("Number of Employees".).required = true; // set required property
if(bSubmit) {
// your submit acation;
} else {
app.alert("Not all required fields properly completed", 0, 1);

Possible to change the default spool request title ?

Hello,
I'm SAP Basis guy, I've been asked by our functional team if it would be possible to change the default spool request title.
Our endusers have access to transaction SP01, where every morning, they can see the spools request that have been generated during the execution of night batches.
Currently, the default spool name is displayed :
Title or name of spool request LIST1S LOCL ZREPORTSUFFIX (in transactions sm37 and sp01)
Is it possible to change the default name of this spool request with some abap coding ?
Thank you.

hi,
goto transaction SPAD and change the default values as you require but i doubt whether you would be able to change the spool title after the job has been triggered i think it is nt possible
but for further requests you can change it from SPAD
reard if helpful
vivekanand

Xnet change signal default value

Hello,
I let a schedule table run on a PCI-8516. I want to change specific signal values during run, and I don't know, which would be the best solution.
The changed signal value has to be sent until I programmatically change it again. And, changing the value of another signal in the Frame should not change the other signal which I wrote previously.
Following things I tried:
1. Creating a Frame Out Single Point Session, upon change of a signal change the entire payload of the frame. Here my problem is that I can't write only one specific frame, but I have to write all the frames in the schedule table.
2. Creating a Signal Out Single Point Session, upon change of a signal value call the XNET Write.VI Signal Single-point instance, and write all the signals (array of double), with the changed value on the right array element. With this solution I have to keep track on all changed I do on the signals programmatically. Is it possible to change the default value (through the property node of the signal) of a signal? I tried to do it, but the next time I read this property node, the value seems unchanged. I just read the original default value from the LDF, without reloading the LDF.
Any help is appreciated

Dear Madottati,
Could you please post the LV-Code what you are exactly trying to do.
Kind Regards,
Oleg| Applications Engineering | National Instruments | NIG |

Want to change the default datafile permission (640) to (644)

How datafile is created with 640 file permission by oracle software.(I know for security reasons it is created with 640 permission)
example:
-rw-r----- 1 orasd dba 104865792 Mar 15 01:17 users01.dbf
I want to change the datafile permission as below. Please help me, how to change the default value of the datafiles permisison from (640) to (644) internally while creating the datafile from oracle side.
example:
-rw-r--r-- 1 orasd dba 104865792 Mar 15 01:17 users01.dbf

988104 wrote:
I want to know how I can change the default datafile permission.
umask 022 is working only for the OS files other than oracle.
datafiles created by oracle are having only 640 permission even we set umask value to 022.
I just want to know how can we change datafile permission.
Edited by: 988104 on Mar 15, 2013 4:56 AMI know that is what you are asking. What I am telling you is that this is not something you should normally be doing, which strongly implies you are taking the wrong approach to solve some other problem. If you asked me how to disable all the safety and operational warning devices on your car, would you expect to just get a straight answer without any further questions?

How to Change the default Search value for Field Role?

HI,
I went through numerous threads on how to default the search value , but does not help for my issue. Hence im posting this new thread. Please provide your suggestions on how to achieve this.
For the Ship-to party field (in item detail ) on webui when i do a F4 help i get the pop up with various search criteria and for the field Role the default value is "Ship-to party". which is visible. we need to change this default value to Prospect which is available in drop down.
The attribute is STRUCT.ROLE and view BP_HEAD_SEARCH/SearchHelp . The method GET_DQUERY_VALUEHELPS from the context node class is called to fill the value help for this attribute, but i dont understand how the ship-to party is filled as default. There is no code in this method to default the value.
The generic GET_V_S_STRUCT method also does not default the Ship-to party on this field.
I want to understand how this Ship-to party is filled by default and how can i change this to prospect..
Many Thanks,
Shaik

We had a same requirement of defaulting Sales org and division in search criteria for a specific value.
this can be doen by redefining "DO_PREPARE_OUTPUT" method in IMPL class for the respective view.
See the code:
METHOD do_prepare_output.
*CALL METHOD SUPER->DO_PREPARE_OUTPUT
** EXPORTING
**    iv_first_time = ABAP_FALSE
DATA:
    lr_qs TYPE REF TO cl_crm_bol_dquery_service.
* Get current query object
lr_qs ?= me->typed_context->search->collection_wrapper->get_current( ).
IF iv_first_time = abap_true.
    lr_qs->clear_selection_param_values( ).
    lr_qs->delete_empty_selection_params( ).
*   if l_sales_orgs is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '1'
        iv_attr_name = 'SALES_ORG'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = 'O 50000514'.
*   endif.
*   if l_dist_chan is initial.
    CALL METHOD lr_qs->insert_selection_param
      EXPORTING
        iv_index     = '2'
        iv_attr_name = 'DISTR_CHAN'
        iv_sign      = ' '
        iv_option    = 'EQ'
        iv_low       = '01'.
* endif.
Hope this will help..
THanks & Regards,
Amit

Changing the default "New Item" link url in SharePoint

Is it possible to change the default url of the New Item button on a list.
When i hover over or click on new item link it show the ......../15/listform.aspx?Page type=blah.....blah......
I want it to be something like :/newform?source=xxxx
Please help me !
Thank you !

Hi,
The following code for your reference, please add the code into a Content Editor Web Part in the list view page.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.11.2.min.js"></script>
<script type="text/javascript">
$(function () {
$("#idHomePageNewItem").attr("href", "http://site/list/newform.aspx?source=http://...........");
$("#idHomePageNewItem").attr("onclick", "");
</script>
Best Regards
Dennis Guo
TechNet Community Support

Changing the default view for Line Items in an Auction.

Hello All,
We have a version 5 client who is asking for us to change the default view for line items in an auction.
Currently, if you have an auction setup, and you go to the Line Items tab, the default view is the "Basic View". The client would like to change the Default from "basic view" to "price view".
Is there a way to change this default in the system? Can this be configured using query groups? Any information would be helpful.

Hi wood cloud,
This is not possible, bcz there is no VLV for that drop down and we cant set it to the price view.
Thanks,
Ankur Goyal

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Changing the default value of "Items Due" in iProcurement 11.5.9

Similar Messages

Maybe you are looking for