Changing value for open_cursors

Dear All,
I have changed the value for this parameter in a customized init.ora file which I give during the startup of the Database like this :
startup open pfile=/software/initkbdev.ora
I want to change the value for this permanently in the database.
When I give the following command :
startup open
the value goes back to the previous one.
How to make this change permanent ?
How should I solve this ?
Thanks in advance.
Regds..Ramakrishnan

Hi,
If you startup your database with the right init.ora file, the open_cursor value in v$parameter can't "go back to his previous value".
Check if you modify the right init.ora file.
Fred

Similar Messages

Changing values for EEO Questionnaire Information Fields in E-Recruiting

We are implementing E-Recruiting 6.0. I have changed entries for EEO values for Race Category via the IMG SAP E-Recruiting>Recruitment>Applicant Tracking>Questionnaires>Equal Employment Opportunities-->Assign Values to Information Fields. When I attempt to create an EEO questionnaire using the new values, the old values are retained. I have been able to determine that when an EEO questionnaire is created entries are created in the T77RCF_MBO_ATTR table linking the values with a VC object, but I haven't been able to figure out if there is a way to clear out/fix the entries in that table.
Any assistance with this problem would be appreciated.

Hello Cornelia, Hello Roman,
first of all: thank you for your very fast reply. I tried to delete the cache as mentioned above and invested some hours in investigation. Your answers gave me some new searchwords and it looks like I found the solution.
I found note 830251 where SAP said, that there is a difference between old and new way of implementing Corporate Desing to BSP-Applications.
The old method is the one I mentioned above, but this works only as long as SAP_BW 3.5 SP04 is not in the system. After SAP_BW 3.5 SP04 is used, there is a new way to change the design of BSP-Applications.
Here is the link to the note:
https://service.sap.com/sap/support/notes/830251
I will try it and - for the case somebody else will ever have the same problem - post the results.
Once again thank you for your great help
Kind regards
Michael

Wlst script to change values for Logging.

Hi,
i am trying to write a wlst script to change attributes for the following.( i am new to wlst scripting)
For all servers in a domain,
Logging --> General --> Check Limit number of retained files
--> Files to retain to different number.
--> Log file Severity Level
--> Standard out Severity Level
--> Demain log broadcaster Severity level
--> Memory Buffer Severity Level
Logging --> HTTP --> Check Limit number of retained files
--> Files to retain to different number.
I was able to figure out the path for some of the attributes in Logging --> General.
wls:/wl9xdomain/serverConfig/Servers/AdminServer/Log/AdminServer>
wls:/wl9xdomain/serverConfig/Servers/AdminServer/Log/ManagedServer1>
Can you help in finding the paths for above attributes.
And this is the sample script i wrote, and succeded in changing "Files to retain to different number" in Logging --> General.
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
cd('/Servers/AdminServer/Log/AdminServer')
set('FileCount',10)
validate()
save()
activate()
disconnect()
exit()
Thanks,
Krishna.
Edited by: user2656687 on Apr 15, 2009 4:46 PM

Thanks for the response. I was able to figure out that access.log file attributes are in /Servers/AdminServer/WebServer/AdminServer/WebServerLog/AdminServer.
And now i trying change script to apply for all the servers.
when i use for loop it is failing. any thougts on it. may i know the syntax in this case..
connect('weblogic','weblogic','t3://localhost:7001')
edit()
startEdit()
cd('/Servers/AdminServer/Log/AdminServer')
cmo.setNumberOfFilesLimited(true)
cmo.setFileCount(100)
cmo.setDomainLogBroadcastSeverity('Warning')
cmo.setMemoryBufferSeverity('Warning')
cmo.setLogFileSeverity('Warning')
cmo.setStdoutSeverity('Warning')
cd('/Servers/AdminServer/WebServer/AdminServer/WebServerLog/AdminServer')
cmo.setNumberOfFilesLimited(true)
cmo.setFileCount(100)
save()
activate()
Thanks,
Krishna.

Change values for report parameters

Post Author: Galen Chen
CA Forum: .NET
Hi All,
I am trying to set the values for the report paramenters which are datetime type. But when I tried to set like
.SingleValue.Value = Now()
I got "One or more arguments are invalid.".
If anybody know what this means, please help. Thanks
regards
Galen

Post Author: quafto
CA Forum: .NET
Check out the samples published here http://support.businessobjects.com/communityCS/FilesAndUpdates/sample_applications_for_.NET_developers.pdf.asp?recDnlReq=Record&dnlPath=sample_applications_for_.NET_developers.pdf.
Or review the documentation on the Developer Zone on passing parameters, http://devlibrary.businessobjects.com/. I don't know of any property called "SingleValue" in the .NET SDK so I'm not sure where you got your code from.

XSLT List View Web part with Inline Editing changing value for one field changes the other lookup field

Hi
It's a bit of a weird one. In an XSLT List View web part when Inline editing is enabled if I change the date column, it changes the lookup field column as well. This behavior only occurs if the lookup list has more than 20 entries. Below 20 and we are
OK.
Let me explain by example:
MileStones List - Having more than 20 items
Tasks List - having a lookup to the Title field from MileStones list. Also having a due date field.
Simple web part page with one XSLT List View web part for Tasks having inline editing enabled.
When I edit the first record's due date and press enter (which saves the changes and moves onto next record) and change the due date on second record without even touching the MileStone field. Press enter to commit changes and you see the milestone changing
on first record!
The wierd thing is that if the MileStone list has less than 20 items all works as expected.
Any pointers will be appreciated
Thanks

Hi,
This is a known limitation when working with complex fields like Lookup field.
A workaround is that we can avoid using the inline edit feature when there are
complex fields in a list.
You can take a look at this KB from Microsoft Support to get more details:
http://support.microsoft.com/kb/2600186/en-us
A similar thread for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/3d369611-ee79-4b5c-86bb-c0f3878cd746/standard-list-view-with-inline-editing-lookup-column-copies-preceding-or-following-items-related?forum=sharepointgeneralprevious
Thanks
Patrick Liang
TechNet Community Support

Changed value for Dom0 but xl does not reflect changed value

Hi.
I have updated Dom0 default value to 4096M in /boot/grub/grub.conf. However it only display a value of 2994M when I do a xl list after rebooting the host.
I have installed OVMS 3.1.1 on a Dell M620.
Any help is welcome.
Thanks.

Same here. I've been intending to open an SR about it an never have. I don't know what difference it actually makes but the documentation does recommend you do it and it doesn't reflect that its been changed.

Smartview 11.1.2.5- Cannot change value in Text-List Dropdowns- Excel Crashes

Using latest/greatest Smartview with 64-bit Office and Windows 7. I have a native essbase app utilizing text-lists. I am trying to update text-value through smartview. Smartview automatically produces a drop down to select a value from the linked text-list. However- as soon as a different value is entered or selcted in this cell with the drop-down list- Excel crashs. I have reproduced this consistently everytime. I have no way to change values for text-measure accounts linked to text-lists. I feel this is and incompatabiliyt issue with office 64-bit.

SmartView using the forms. It appears this issue has been logged as issue number 6566082 as seen here: http://docs.oracle.com/cd/E17236_01/epm.1112/readme/sv_1112200_readme.html
But I can't seem to find out where I can get information on the status of this issue and whether it's been patched in future versions.

FM returns wrong total value for Limit type PO's

Hi all,
I am working on SRM 5.0 (SP13) ECS.
I have implemented the BADI "BBP_WFL_APPROVAL_BADI" for determining the Approvers for PO whenevr a PO is changed.If the diference between the Old PO value and new PO value is > 1000 and the approval text field(custom text under "Documents" link) is set to "YES",then the WF approval is required and the approvers are determined.
The above logic works fine for the Standard type PO's where the difference between the old value and new value is determined using FM "BBP_PD_PO_GETDETAIL" by passing the GUID (for the change version and the active vesion) obtained at runtime in the BADI.
However for the limit type PO's,whenevr I change the total value for the Limit item,I see that the FM "BBP_PD_PO_GETDETAIL" doesnt return the changed value but always returns blank!
Bcause I need to check bth the values i.e. Custom text set to "YES" as well as Total value diff ,I cant use the start conditions in tcode SWB_COND.ALso I need to fetch the approvers based on the price diff so I need this value at runtime in the BADI using the FM "BBP_PD_PO_GETDETAIL".
Please advise why the FM is not returning the changed values for the Limit type PO and is there any other way(other table/FM) to get the changed value at runtime for the LIMIT type PO.
Thanks for your time.
Edited by: Rads1234 on Nov 18, 2010 4:39 AM

Thanks for the rpely.
Yes.I am using the GUID available at runtime in the BADI "BBP_WFL_APPROV_BADI" which is the current change version GUID.I tried using that GUID to get the data from both FM as well as CDHDR and CDPOS tables.
I think this is something related to LImit type PO because for Standard type PO's the FM returns the corretc changed value (as in the screen) for the change version GUID.I fail to understand why the changed values are shwon on the screen but are not stored anywhere in the system before actually ordering the PO!

Rz11 changing values

hi all,
When i will get situation for RZ11 option(change values) for the changing values of work-process parameters ?
rz11>in that search option we get one workporcess of documentation over there beside of that when we get change value option?
Regards,
Vardhan

Vardhan,
You need to modify the work process in RZ10 or OS level.
The only way to add work process during system runtime without restart is Dynamic Work Process using the parameter RZ11 - rdisp/dynamic_wp_check=TRUE and you need kernel version 7.20 or 7.30
Refer to below link on how to implement
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/c24a5fb8db0e5be10000000a1553f7/content.htm
http://www.youtube.com/watch?v=5Xs3pJ-f844
Regards,
Arjun

Photoshop: values for type, brush, crop, lasso etc tools broken on Leopard

I posted this in answer to another thread, but decided that it may be helpful to some Photoshop users if it had its own topic:
The following is a technote copied from Adobe's forums, regarding the performance of several menus for key tool settings in Photoshop CS3 running in Leopard:
*Changing values for type, brush, crop, lasso etc tools broken on Leopard*
*Kirsten Harris - 08:58pm Nov 15, 2007 Pacific*
Adobe and Apple are working closely to provide a fix to a known issue running Adobe Photoshop CS3 and Photoshop CS3 Extended on Mac OS X Leopard (v10.5.1). Currently, when you enter values in numerical fields to set sizes for the brush, crop, marquee, lasso, type, and other Photoshop CS3 tools, those values revert to previously entered values when you try to apply them.
# While we have identified workarounds for some of the affected tools, this issue prevents people from working as precisely and intuitively as they expect. Providing a fix to customers is a top priority. Please note the following: The fix will be provided through an update to Mac OS X Leopard. Consequently, it is not part of the Photoshop CS3 (10.0.1) update.
# Apple is collaborating closely with us to get this fix incorporated into a Mac OS X Leopard update. No public schedule is available at this time, but both companies understand the urgency of this fix.
# As soon as the appropriate update to Mac OS X Leopard is available, we will immediately alert our Photoshop users.
Affected Photoshop CS3 tools: Art History tool, Blur tool, Brush tool, Burn tool, Color Replacement tool, Clone tools (all), Crop tool, Dodge tool, Eraser tools (all), Gradient tool, Healing tools (all), History tool, Lasso tools (all), Line tool, Magic Wand tool, Marquee tools (all), Paint Bucket tool, Pencil tool, Polygon tool, Quick Selection tool, Red Eye tool, Rounded Rectangle tool, Sharpen tool, Smudge tool, Sponge tool, Slice tool, Type tool
Workaround for tools with sliders: Instead of typing in a number, use the sliders to change the value.
Workaround for tools with pop-up menus: Enter a value for the size but don’t press Return/Enter to apply the value. Instead, choose it from the top of the Size pop-up menu to commit it.
Workaround for tools which do not have sliders or pop-up menus: For certain tools, such as the Line tool, you may want to set up presets that you can load to set common sizes. Alternatively, you can restart Photoshop CS3 to clear the problem. You will then be able to enter values again. However, the issue typically re-surfaces quickly.
If additional details come to light, our tech doc Values in numerical fields in Photoshop CS3 revert to the previous value in Mac OS X v10.5.1 (Leopard) will be updated.

Well, that's interesting! Here I thought the problem with my CS1 was just that it was too old, running in Rosetta and all, and would be fixed when I get my Xmas treat of CS3. Wonder if that means when the fix comes from Apple it will also fix the same problem in CS1? Of course, by then I'll probably have CS3.... Thanks for posting this, I would have been mighty annoyed to have plonked down my 200 bucks only to discover that I had the same bugs.
Francine
Francine
Schwieder

Unable to change Value From M to S in p2011 for Orgini field

dear freinds,
             I have uploaded data using the F<M HR_INFOTYPE_OPERATION for infotype 2011 . However i am not able
change the value for Origin(defaulted as M) ......as this field is greyed out . As such when i am trying to pass another value through coding as S iam not able to do so ....and it is saving in the database as M only ......Is there any way i can get the value as S only?.
Please find my code below.
MOVE : fp_wa_temp_final20-pernr TO p2011-pernr,
           fp_wa_temp_final20-date TO p2011-begda,
            fp_wa_temp_final20-date TO p2011-endda,
          fp_wa_temp_final20-outtime TO p2011-ltime,
           fp_retyp                 TO p2011-satza, "P10
           'S'                      TO p2011-origf,
           '2011'                   TO p2011-infty.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
      number = fp_wa_temp_final20-pernr
    IMPORTING
      return = gv_return_struc.
IF gv_return_struc IS INITIAL.
    CALL FUNCTION 'HR_INFOTYPE_OPERATION'
      EXPORTING
        infty                  = '2011'
        number                 = fp_wa_temp_final20-pernr
      SUBTYPE                =
      OBJECTID               =
      LOCKINDICATOR          =
       validityend            = p2011-begda   "'99991231' " p0050-begda
       validitybegin          = p2011-begda   "'18000101' " p0050-endda
      RECORDNUMBER           =
        record                 = p2011
        operation              = 'INS'
      TCLAS                  = 'A'
        DIALOG_MODE            = '0'
      NOCOMMIT               =
      VIEW_IDENTIFIER        =
      SECONDARY_RECORD       =
     IMPORTING
        return               = gv_return_struc
          key                = gv_record_key.
     CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
      EXPORTING
        number = fp_wa_temp_final20-pernr
      IMPORTING
        return = gv_return_struc.
ENDIF.
Could any one please correct me where i might have gone wrong or i mean to say how i pass the value forcefully as S
for the Greyed out filed (ORIGIN) in pa30.
regards
divya

Hi Divya,
Can you please let me know how you have solved the issue??

How to change default Current Flag values for SCD2?

I'd be curious to find out how to change default Current Flag values for SCD2 (instead of 0/1 to use N/Y)
Probably I can change IKM module .... is there another way?
Thanks

Hi,
You need change the IKM. This values are hardcode in the IKM.
You can create a new IKM and the values used are a options of the IKM.
Regards
Edited by: Uthred on May 18, 2009 4:27 PM

Open sales order value for credit check need to be changed (S066)

Hi all,
I need to change open sales order value which is already there in S066 table.
Previously we had used open order value for credit check. Open order values are already updated in the S066 table.
Now we dont want to consider open order value for credit check (which is already included in the credit exposure field in FD32).
When we create sales order system is taking old open order value for credit. Now i have changed not to update open order value for credit check. Now its not updating open order value. But my issue is how to change existing or (previous) open order value for credit?
Can i change S066 table data directly to '0'. Is it advisable to chage open order value directly from this table?
Please advise me.
Regards,
Babu
Edited by: babs on May 19, 2010 4:26 PM

Hi Babs,
If you doesn't want to reflect the open order value in the structure for this order value ,If the order is not processed kindly delete the line items and the order. Then save the document. Then try to see the structure S066.. This will be modified.
If you want to modify the value then follow the below process.
Otherwise delete the line item in the order and change the pricing date and the document date. Re enter the line item again so that it will take it up the new changes.
I hope it will help.
Regards,
SK

Cant able to see new value and old value for change in purchase order text

Hi all ,
I am not able to see changes done in material's purchase order text in material master. When i use tcode MM04 to see changes done material master it does not report new and old value for change if it is done in purchase order text of that material .
Thanks in advance ,
Shikha

Hi Shikha,
I'm not sure it works or not. But you can try SCU3 t.code and table DBTABLOG. May it can help you out.
I also faced this type of issue in Plant data and it get resolved.
Try and let me know...
Regards
Sunil Sisodia

How to Change the return value for the parameters

Hi, Can anyone help me with my problem?
I have a parameter called "P1_Projects" defined in the HTMLDB page, on the report region, there are 2 buttons, one is "Go" button to submit the report on the screen, so user can preview the report, then another button "Export to PDF" can be clicked to generate the report using Oracle Report Services. The "Export to PDF" button will use the same set of parameters submitted for the "Go" button.
So, the parameter "P1_Projects" is being used by these 2 buttons. and I have to pass a "%" wild card for "All Projects". To make the "Export to PDF" button work, I have to safe encode the return value for "%" to "%25" in order to pass the URL formula, but now my "Go" button doesn't work with "%25", it only recognize the "%" wild card.
Is there a way to conditionally change the value depends which button is clicked?
Any hint or help is highly appreciated!
Hong

try creating a plsql process which sets the P1_Projects item as required.
in the plsql you can do:
if :REQUEST = 'GO' then
xxx
else
xxxx
end if;
set the condition to plsql expression:
:REQUEST in ('GO', 'EXPORT')
NB. the request value is usually set to the button name when a page is submitted from a button

Changing value for open_cursors

Similar Messages

Maybe you are looking for