Changing Video out on iPhone 4 car radio

I have a pioneer avic-d3 and an iPhone 4. The radio will play video from the iPhone but I can't find the setting to allow the iPod to send its video to the radio. Any ideas?

There is no setting. On my Pioneer deck, when I connect my iPhone, I can select videos when my deck is set to iPod and the list of videos on my phone is dislayed on the screen of the deck. I select one, it plays on the decks screen like yours.
Again, there are no settings on the phones ipod to control this. I connect my phone using the standard iPod connector included with the deck.

Similar Messages

  • HT4108 how can i setup video out on iphone 4

    how to setup video out on iphone 4 to be able to connect it to the tv?

    Connect the Apple adapter the phone and connect to the TV.

  • Video out from iPhone 3GS to TV.

    Can I use the standard (3 phono plugs on the end) video out lead I already have to view keynote presentations from my iPhone 3GS on my TV/Projector?

    Same problem here.
    I can't get any video out of my faithful iPhone 3GS running iOS 6.xx.
    I have been browsing Apple discussions for solutions and most of them seem to point out to a faulty Video Composite cable. This is not my case.
    I can rule that out 100%.
    Old iPhone 3G running ios 3.1.2 works just fine as well as does iPhone 4, with the same cable.
    I have tried with a friend's TV and cable and iPhone 3GS and we have identical issues.
    (different cables and phones, same issue).
    Please note all testing has been done with genuine Apple Video composite cables.
    So this points out clearly to a iphone iOS issue combined with hardware.
    It appears that starting from iOS > 5.0 video output has been disabled on earlier iPhone models prior to 4.
    It would be nice if Apple could issue a Knowledge Base document on the issue as that would save many people further testing and waste of time.
    This document http://support.apple.com/kb/HT4108? isn't really complete enough as it stops at iphone 4.
    Has anybody the ultimate answer on this issue?
    Are there any known work-arounds?
    Thanks and regards
    Pieter

  • Video Out on iPhone 4

    I have Apples audio and video out cable adapter.  One end plugs into the dock connector, the other end has left and right audio out, and composite video out.
    When I use this cable adapter with my iPod, all videos play perfectly on any television set.  However, when I use the same cable on my iPhone 4 I get audio but no video.
    I suspect that Apple has crippled the video out for some reason.  Please tell me I'm wrong.
    http://www.iphone-tips-and-advice.com/iphone-video-out.html
    I am simply trying to watch NASA TV using my iPhone.  I used to get NASA TV from DirecTV, but you must now have HD DirecTV to get NASA TV. ( we still get 100 channels of infomercials however.)

    I have a bad habit of asking questions that no one knows the answer to.
    Do I get a prize?

  • Video Out on iPhone 4 and iOS 6

    To watch downloaded video, I connect my iPhone 4 to my TV using an AV dock-to-component cable. Since installing iOS 6, my iPhone says it "does not support that accessory." I knew of the video out issues with iPhone 5 but didn't read anywhere that it would break functioning video on an iPhone 4. You could call me a very unhapppy camper.
    Does anyone have a solution or a workaround?

    I am having some crazy issues over the last couple days and I live in SF Bay area too. On AT&T not Verizon. Updated to ios6 almost a month ago and didnt start having issue until Thursday
    First I'm stuck in a call, can't end or go to screen that shows the keypad or put on speaker; nothing.
    2.Then on Fri no badge on SMS app and all new and old texts gone.
    3. Can't even start new sms from icon in top right nor from send message button in each contact
    Does any of this sound familiar?

  • What's the deal with video out on iPhone 5?

    Is there a way to get video out on to an external display using the old style cables? Is this gone forever?

    yup. change is the only constant in life.. enjoy

  • Video out for iPhone.

    Interesting that the iPod Touch has video out capabilities. Why doesn't the iPhone have that also?

    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nnmm=br owse&mco=EEBCC376&node=home/iphoneaccessories/cablesdocks
    I believe that is probably what you were talking about, and more than likely Jobs is keeping this "under wraps" until he can make a big announcement to everyone that iPhone now has video out, since I'm sure everyone with an iPhone has wanted this feature. But, as you can see, it IS under the iPhone docks and cables, so hopefully it will be compatible. . . finally
    EDIT: here's the actual product http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=184 EAE7D&nplm=MB128LL/A
    Message was edited by: Cody Trevino

  • Iphone car radio interface

    I am interested in interfacing and Apple iPhone (not 3G) to my 2005 Chevrolet Silverado Factory XM radio. Neo Prolink, Peripheral iSimple, USA Spec and DICE have produdcts that all claim to be "compatible" with the iPhone. I want a interface that will allow me to control the music selections on the iPhone from the steering column and factory radio controls while simultaneously displaying the music information (artist, playlist, genre, etc) on the factory radio display. Any recommendations?

    My older iPhone (original) is having the same problem. I tried to update the Dension head unit to the latest firmware and the update would not work. My iPhone exhibits the same misbehavior as John mentioned in his original posting. Until the 2.2 software update, the iPhone plugged into the cradle, charged the phone, and gave me full control of the iPod functionality including the on-screen song navigation. Now, I get this stupid Accessory Connected and cannot even see the track titles anymore.
    I guess I am off to buy a new head unit for my car. The biggest pain of all this is the installation of the Dension unit took hours, and I am not looking forward to replacing it because of the time and cost.
    Sorry that I cannot do anything more than commiserate with you all and confirm that Apple definitely introduced a new "feature" that yields the IceLink head unit virtually useless.

  • HT1454 will the new iphone 5 be able to play video out?

    Hi
    Can any one tell me if the iphone 5 will be able to play video out as the older ones do? I have my 4s plugged into my Alpine system in my car to watch and play all music and movies?

    AFAIK, only wireless Video out for iPhone 5.

  • Ios podcast utility that supports video out through composite cable.

    Hi everyone,
    I'm watching some video podcasts (you're right - MacBreak Weekly!) in my car while staying in traffic jams. And I use original Apple composite video cable to send video to the in-dash screen of my Nissan.
    There have been some podcasts downloaders in App Store, like Instacast, Downcast, Podcaster. But none of them are able to send video out of iPhone.
    If anybody seen one that is able to do that, I'd appreciate a link dropped over here.
    Thanks a lot,
    Egor.

    try rebooting the iphone
    my iphone4 works just fine with my composite and component cables I'm using latests ios version
    but mind you it only works with tvout ables apps like youtube it don't support mirror

  • Any GPS/NAVI apps with video out feature??

    Are there any GPS navigation apps out there for the iPhone that will work with the video out? My car stereo has an audio/video input, I have the a/v connector and I'd love to run a GPS app for navigation and display the NAVI video and audio on my head units audio input. I know that some dont support the video output feature, know of any that do?

    I just tested it on my Nokia N8 (Running Symbian Anna ) and Nokia Beta Labs latest version of the Camera application.
    I have set so capturing geolocation information is saved for video. 
    I Record a video and as you say if you playback the video right away Choose Options -> Details  I get the GPS location shown.
    I  then go to Meny -> Photos
    Choose the Check button (bottom left)
    Then select the Video, then go to Options -> Details
    I also get the GPS coords under Location here. 
    This location data is not shown if you show details under Meny -> Videos though..

  • What is the difference between Video-out and mirroring?

    What is the difference between Video-out and mirroring? I can't get iPhone 4 video to work on my TV screen
    I have just bought an MD098ZM/A (Apple 30-pin Digital AV Adapter). I am struggling to get it to show a picture on my TV. I know I'm doing something right because the audio is coming out of my TV speakers but no picture on the TV screen.
    I have used the same HDMI channel (on the TV side) with the same cable and my thunderbolt port (MacBook Air) without any trouble - and on the same app (BBC iPlayer download then full-screen mode).
    Now I note that the packaging for the MD098ZM/A says video-out on iPhone 4 but mirroring only on iPhone 4S. I only have an iPhone 4 (not the 4S). Now if the lack of iPhone 4 support for mirroring means that I can't play video material out to my TV, then in what sense is there any video-out capability at all?
    There is only safety and warranty paperwork in the Apple adapter packaging - no help information. And I haven't found further guidance online either.
    I do note somewhere online that it suggests that basic non-mirroring video-out (for this adapter) only works with some external TV sets. Any way of finding out which? I'm using a Sanyo CE32LD90-B LCD TV if it helps.
    So far not doing very well.

    Now found these but have had to give up on this adapter!
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    http://support.apple.com/kb/HT4108

  • I get error message when sending a video from my iPhone on iMessage

    when trying to send a video out my iphone library I get an error message    stating iCloud error message download

    Here is more information on problems some people have had trying to edit iphone video
    http://forums.adobe.com/thread/881246
    http://forums.adobe.com/thread/1011411?tstart=0
    http://forums.adobe.com/thread/934466

  • My iPhone 4 can not be read by my JVC car radio after upgrading to 5.0

    My iPhone 4 has always worked with my jvc radio until I went to 5.0 radio just says cannot read and phone says cannot playI whish Apple would fix this problem.

    I figured out my problem. When I upgraded to 5.0 my ITunes did not sync correctly so when I tried using it with my Jvc car radio it locked it. So I restored my iPhone and tried it again with no luck so I reset my radio and what do you know it works perfectly now. So if anybody else has had a similar problem try it before replacing your head unit.

  • ITunes automatically starts playing when iPhone 5 (w iOS 7.0.2) is connected to car radio via an Apple cable

    I'm using an iPhone 5 with iOS 7.0.2, regardless it is the most recent update
    When I plug my phone into my car radio's USB port (Apple cable, not knock off) iTunes starts to play the very first song in my large iTunes library.
    I plug into the USB port to charge it and to connect the phone to radio in order to use hands free audio.
    I have tried two or three different cables, it happens with all cables and again all are actual Apple cables.
    I do not recall this happening with iOs 6 or at least as much.
    With iOs 7 it happens every f***ing time. Extremely annoying and dangerous (I may get so frustrated by this that one day I might just smash the phone or the car radio :-) to the equipment.
    I have to unlock my phone, go to iTunes and pause or stop the song/iTunes.
    The app does not show as being open, that is why I have to go iTunes itself, the old fashioned way, so to speak.
    It sometimes happens when I plug my headset in (also Apple brand, the basic ones that come with the iPad and iPhones) to phone and have tried the two different ones I have. It only seems to happen if my phone is not in use (i.e. I am on a call and switch to the headset it does not happen)
    Interestingly this issue with the headphones and iTunes automatically starting happened more with iOS 6  and than with iOS 7. Ironically the opposite is true with the car radio, USB port cable, charging and iPhone — it rarely happened with iOS 6.0 but with iOS 7.0 it always happens.
    I cannot seem to find a fix here but I do see I am not the only one with this annoying issue.
    Please someone (APPLE!)  figure out a fix.
    PS I have even considered NOT having any of my music on my phone — none at all —  which not only would solve the problem (I would hope!)  but be extremely inconvenient and defeating the purpose of only having an iPhone vs an iPhone and an iPod.
    PPS -  I probably left out something really relevant, like what color is my car , so if I did, please let me know.

    I have an iPhone 5 and every time I get into my car, as soon as my iPhone connects to the bluetooth or if I connect the USB cable, the music starts blaring through the car stereo, even if the radio was off. If I am using any of the navigation apps on my phone (google maps, waze, apple maps), and I happen to be lucky enough to have the voice directions working (that's consistently inconsistent), the music will frequently start by itself during navigation, even if I didn't turn the music on. Sometimes the music and navigation voice over will compete with each other at the same time. Sometimes they both go totally silent. Sometimes I'll hear only music. Sometimes only the voice directions. And if make or receive a phone call while the navigation is working, as soon as the phone call ends, the music will always take over again, even if I didn't have the music on prior to. I've checked and re-checked every setting on my phone, in my apps, in my car, and followed all of the suggestions I've found online (note to Apple - there are tons of posts on this topic), and nothing works.
    It seems like there should be an easy software fix for this, or at the very least, options to:
    prevent the music from starting automatically every time you connect with a cable or bluetooth (insanely annoying)
    allow voice directions to temporarily mute music, should one choose to be listenting to music and navigating at the same time
    just listen to voice direction - no music!
    Better yet, how about just provide options to let the end-user decide when to listen to music. 
    For a product that is supposed to be "intuitively easly" and/or "just works", this level of dysfunction shouldn't be acceptable. Come on Apple - what are you doing to fix this???

Maybe you are looking for

  • How can I make a pdf book with "camera to pdf" option on phone? I can only convert one pic at a time

    How can I make a pdf book (single pdf file with several pages)  with "camera to pdf" option on phone? I can only convert one pic at a time. ( Or )how can I attach all those pictures converted pdf's into one pdf file which obviously results in to a si

  • Can I replicate to a off-site DR Hyper-V site and ASR?

    Hi, I've had a troll around the various sites but I can find a definitive answer.  Am I correct in saying that I can only replicate to one location i.e. offsite DR Hyper-V server OR Azure Site Recovery? Rob

  • Cad title block cofig docs required

    Hi All. I am also working on the integration of CAD integration with mySAP PLM. I am using AutoCAD 2007. As per the settings suggested in this thread, I have already completed it. Still, I am facing the problem with Title Block field Mapping. In this

  • Power Query: Expand multiple lists within a row at once

    I have a json file that I've been fairly successful importing into excel using power query. My issue now is dealing with lists in multiple columns.  I need to figure out how to expand the values of the lists at once so I only add rows once, versus mu

  • Hints and questions on how to do a good battery maintenance

    Some minutes ago, my (now) old battery reached the 0%-charge point. I had bet the MBP could not stay on anymore but instead, surprisingly, it supported the 0-charge "stress point". I was waiting for it to go to -1% charge but it didn't happen since I