Chaning the filenames of songs

iTunes changes the name of the file to the song name, but I would like to name the file sometimes like Artist - Song name instead. But I don't want itunes to display the name then as artist - song name. Do I have to disable library management then do it by script?
Thanks,
ES.

iTunes will always display the song name first. You could do it through Get Info if you wanted to go through your whole library.

Similar Messages

  • Need chaning the Genre on songs under the "newest" version upgrade

    Once again iTunes has remarkably screwed-up my Song Library with their constant upgrading.  Only this time when I click on the genre box, it does not allow me to change or type over the exisiting info.  Now about 80% of my library is all listed under "Pop", when some should be Alternative, R&B, etc.  Does anyone know how to get around this so I can once again change my song genre's.  iTunes has way too many genre's.  I try to minimize the number of genre's so I don't have only 5 or 6 songs in that group.  This is getting very frustrating, and I am going to have to stop purchasing songs from iTunes if they knock this **** off.  Thanks in advance for any help or suggestions.

    I don't care WHO decides the genre of a piece of music.  I am talking about the constant upgrading by iTunes.  Almost everytime I log into iTunes, I have to keep chaning the genre's in my library.  Your site is not user friendly, and you haven't even offerred a hint of helping me to resolve this issue.  So don't you come onto my thread with some smart-*** statement if you're not going to help me.  All that you have done is prove that iTunes ***** and your so-called support team are just a bunch of idiots who never do anything but fowl things up even more! 

  • In previous versions of i Tunes you could highlight a song in your library and there would be a genious list on the right side of the screen showing songs like the one highlighted in the library. Now I do not get that list. Is there a way to get this back

    In previous versions of i Tunes I could highlight a song in my library and a genious list would show on the right side of the screen listing songs that were like the one highlighted. Now I do not get that list. Is there a way to get that back?

    Hi again Bob,
    I believe I've found the feature you were speaking about now. Information on the "In the Store" feature of iTunes can be found here:
    Apple - iTunes - Inside iTunes - Using In the Store from within your iTunes Library.
    http://www.apple.com/itunes/inside-itunes/2013/01/using-in-the-store-from-within -your-itunes-library.html
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • [b]HOW TO:[/b]  Copy and Paste THE Filename AND its PATH from Finder

    HOW TO DO THIS: Copy and Paste THE selected Filename AND its entire PATH from Finder to another application as in document footer reference, or document database which has a path field to aid in locating the file later.
    Finder, Spotlight and File Info (can be used to display Path) or using Command F, command I, etc. but user is not allowed to copy the path to clipboard.
    This is rudimentary, yet the word Path, is unknown to Mac Help.
    Message was edited by: jbov

    AJ,
    Isn't it amazing....There is no Command Key for this action? Apple Care was confounded too. And thanx, it'll be a help....
    Jim
    its tedious, but this should work:
    open a terminal window.
    Drag and drop the icon for the file in the terminal
    window.
    This will put the full path including the filename on
    the command line.
    Copy the path from the command line, and paste
    (wherever).
    Close the terminal window.

  • How do I add the filename as an overlay on a PDF file compiled from images?

    I am creating pdf files from digital camera images and want to add the filename as a visible overlay (ie either in Header/Footer or as a watermark).  I can find all other alternatives eg Bates numbering, customised Header/Footer etc), but cannot find a solution to adding each image's filename to the image.  I can do it in Bridge but not Acrobat.

    Acrobat does not preserve the original filename information of images.
    You should it in another application (Photoshop?) and then import the final
    image into Acrobat.

  • Is there a way to automatically insert the filename in the footer of a spreadsheet using iWork's numbers 3.2?

    Is there a way to automatically insert the filename of a spreadsheet into the footer when using iworks numbers 3.2?  iworks 09 had this feature and I can't find this feature in the new version of numbers.

    Hi rhyolite,
    In Numbers 3.x, The Print View and Layout View have gone (for now at least). Page Headers and Footers can only be reached under Menu > File > Print... to open Print Preview. Hover the cursor to reveal the Page Header and Footer fields.
    The only inserts that I can get to work in Print Preview are Page Number, Page Count and Date & Time. Filename is no longer in the Insert menu.
    Regards,
    Ian.

  • Processing the filename in the payload

    Hi,
    I am getting the filename in the payload, I want to read that file.
    How do I achieve this..
    Regards,
    Varun

    Hi,
    For Example if we want to get the Input file name & Directory Details into Target message.
    Ex:
    I/P File name is :::::231004.xml  Ftp Serve Path : //xideveloper/Test_XI/PO
    O/P File name can be :::Any thing
    Input File :  231004.xml
    <?xml version="1.0" encoding="UTF-8"?>
    <ns0:MT_TEST_AGCO xmlns:ns0="http://tafe.test.com">
       <Header>
          <NAME>giri</NAME>
       </Header>
    </ns0:MT_TEST_AGCO>
    Output File : Out.xml
    Here in this output we are able to get the Filename & Directory Info in the FileName_1 Field.
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns0:MT_target xmlns:ns0="http://test.com">
    - <Header>
      <Name_1>giri</Name_1>
      <File_Name_1>231004.xml //xideveloper/Test_XI/PO/</File_Name_1>
      </Header>
      </ns0:MT_target>
    You should capture the Source File name & Directory Info into Target Message.
    1)     Write One UDF & Map Like Constant(u201Cu201D)---UDF----FileName_1
    2)            In Advanced mode check the check box Set Adapter-Specific Attributes
    3)     Check the ASMA Parameters in Sender Adapter Alone
    4)             No need to check the check box ASMA in the receiver side
    UDF Code:
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    //for getting filename
    DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    //for getting directory
    DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
    /similarly for getting filetype, filesize you need to specify in the above code instead of filename or directory/
    String FileName = conf.get(key1);
    String Directory = conf.get(key2);
    String Cat = FileName+ " "+Directory;
    //return FileName;
    //return Directory;
    return Cat;
    Regards
    Seshagiri

  • Accessing the filename in the payload

    Hii
      I want to process the filename (eg:sample.xml) from the payload of the message.
    <Message>
          <Method/>
          <Source>sample.xml</Source>
          <Target/>
       </Message>
    And use the filename in other scenario.
    Regards,
    Varun

    Hi Varun
    Use variable substitution
    File name : %FileName%
    Enable variable substitution in Receiver File adapter.
    Variable name = FileName
    Reference = payload:Message,1,Method,1,Source,1
    For more info refer
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    Thanks
    Gaurav

  • Is there a way to automatically add the filename in the page header when batch printing text files directly from finder?

    hello, i have 80 text files (docx). the finder preview works great and i can open them in pages.
    I need to batch print them from finder:
    I select all the documents > drag on printer's icon> printer puts them in queue ( after an on the fly pdf conversion)  ad starts printing.
    BUT
    i need the filename printed on each page  ( in hearder or footer) , not only the regular text content.
    Do you know if there is a workaround?
    thank you
    Tullio

    If that section has an ID or NAME attribute then you can add that to the URL (#anchor) that you want to reload.
    See View > Page Source
    https://support.mozilla.com/en-US/questions/774792#answer-128100

  • How to acces the filename from Message Header during variable substitution

    Hi,
    We need to access the attribute filename from Message Header during Variable Substitution.We are able to access the following attributes of Message Header
    sender_party, sender_service, receiver_party, receiver_service, interface_name, interface_namespace,
    message_id (message ID with hyphens, for example 9fbe1ff1-9a0d-11d9-8665-cbf10a126331)
    message_id_hex (message ID in hexadecimal format, for example 9fbe1ff19a0d11d98665cbf10a126331)
    For example, if we want to specify the interface name from the message header in the target directory or in the file name scheme, we enter message:interface_name as the reference.
    In the same way i need to access the filename which we get in the Message Header(which we get in the Message Header when we check the Adaptor specific message properties and filename in sender CC).Any suggestions on the same
    Thanks and Regards,
    Bhargav
    Message was edited by:
            bhargav gundabolu
    Message was edited by:
            bhargav gundabolu

    Hi Bhargav,
    Use this UDF to retreive the file name from the Dynamic Configuration Payload in the mapping.
    getFileName(UDF) -
    > Filename(node in the target structure).
    public String getFileName(Container container)
       //write your code here
    DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
    String ourSourceFileName = conf.get(key);
    return  ourSourceFileName; 
    Create a node in the target structure top hold the filename returned by the UDF.
    Now your payload will have the filename along with the actual data.
    U can use the variable substution now as u use for the other data in the payload since the filename is now a part of your payload.
    Regards
    San

  • How to capture the Filename Dynamically in BPM

    Hi All,
    My scenario is FileBPMFile and my target end should get the same file name as source file name.
    If suppose it is simple File to File we can use set attributes option to get the same filename.
    But if BPM comes into Middle will it be managed if so how?
    Can anyone suggest me?
    Thanks,
    Kalyan.

    Hi,
    There is no difference between File>BPM>File & File-->File with the requirement you are looking for.
    Since you are not doing any modifications to the filename read from Sender File System no need for dynamic configuration concept in UDF of any mapping.
    Do the following
    Sender File Adapter Channel.
    file name : a particular file name or a .(STAR.STAR) according to your requirement.
    e.g., test.xml (or) *.xml (or) . (STAR.STAR)
    Enable Adapter- Specific Message Attributes check box and make sure that the File Name check box is enabled. Save and Activate.
    Receiver File Adapter Channel
    file name :  . (STAR.STAR)
    Enable Adapter- Specific Message Attributes check box and make sure that the File Name check box is enabled. Save and Activate.
    Execute your scenario.
    Thanks,
    Gujjeti
    Edited by: Praveen Gujjeti on Aug 11, 2008 10:14 AM
    There is formatting problem by the portal application as some characters will have specific meaning.

  • Is there any way to retreive the FileName in the mapping

    Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.
       I am using the adapter specific message attributes in the file sender CC.
    Thanks,
    Ravi
    null

    Yes you can retreive it.  Create an simple user defined function in the mapping and use the following code.
    Imports: com.sap.aii.mapping.api.*;
    Parameter: String filename
    Paramter: String filename;
    filename = fileName + ".DAT";
    DynamicConfiguration conf = (DynamicConfiguration) container
    .getTransformationParameters()
    .get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
    DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
    conf.put(key, filename);
    return filename;
    Or
    Just do whatever mentioned in this weblog:
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    ---Satish

  • Retaining the FileName in the Receiver FTP adapter

    Hi experts,
    I have a situation here, were i need to retain the FileName in the message header in the receiver FTP adapter.
    I have tried using variable subtitution but seems the FileName is not supported in variable substitution.
    Please help
    Thanks

    Hello,
    if you need file name to be retained in the receiver adapter from the sender side. then u can do that by dynamic configuration using adapter specific message attributes, check this blog for details-
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
    if you dont have a mapping in your interface to use dynamic configuration, then you can do it via adapter module also- have a look here, /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
    regards,
    francis

  • I purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    i purchased two songs on my iphone and it did sync with itunes. Then i put the two new songs in a music folder and it won't sync the songs to the folder on my iphone. same phone same computer never had this problem before.

    In iTunes, try signing out of your Apple ID & then back in: click on iTunes Store on the left sidebar of iTunes, click on your Apple ID on the top right, sign out, sign back in.  Then try to sync your purchased music to your phone again.

  • My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

    My iPhone has my daughter's music but those same songs do not show up on the computer in the list of songs on my iPhone. They are in the library though

    Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
    Here's that thread...
    https://discussions.apple.com/message/16903613#16903613

Maybe you are looking for