Retaining the FileName in the Receiver FTP adapter

Hi experts,
I have a situation here, were i need to retain the FileName in the message header in the receiver FTP adapter.
I have tried using variable subtitution but seems the FileName is not supported in variable substitution.
Please help
Thanks

Hello,
if you need file name to be retained in the receiver adapter from the sender side. then u can do that by dynamic configuration using adapter specific message attributes, check this blog for details-
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
if you dont have a mapping in your interface to use dynamic configuration, then you can do it via adapter module also- have a look here, /people/sap.user72/blog/2005/07/15/copy-a-file-with-same-filename-using-xi
regards,
francis

Similar Messages

When to use "Use Temporary File" in receiver FTP adapter

Hi Experts,
I have nerver used "Use Temprary File" as the "Write Mode" in receiver ftp adapter.
I want to knwo under what kind of requirment we should use this option?
Thanks in advance.
Best Regards,

Hi Aditya
Usually it's advisable to use "use temporary file" as write mode when you want to avoid your file to be picked up by receiver while PI channel is still writing it.
Obviously larger the file, more chances you have that this issue could occur.
If you select the "use temporary file", XI will write the content to a temporary file with another name of your choice and only once writing has finished it will rename it to the actual name setup in the "file name scheme".
Regards,
Giuseppe

Receiver determination based on the filename of the incoming xml file

hi folks,
is it possible to base the receiver determination from the filename (pattern) of the incoming xml file?
suppose, if the filename is partner1.xml, then the receiver determination has a condition of partner1. in this case, the message is received by partner1.
any advise please?
thanks!
-lex

Hi Lex,
You can use Enhanced Receiver Determination for this. Do your normal mapping from source to target. And another mapping for the receiver determination. In that mapping you can use the UDF for Dynamic Configuration and set the filename as the receiver service name.
Use the following blog for Enhanced Receiver Determination:
/people/venkataramanan.parameswaran/blog/2006/03/17/illustration-of-enhanced-receiver-determination--sp16
This blog explains the usage of Dynamic Configuration:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Regards,
Sanjeev.

How to change the JCA JNDI dynamically using FTP Adapter

We have 5 FTP Servers, each having a directory to poll. We have created 5 CCI instances for these FTP Adapters in the FTPAdapter deployment. We created a BPEL process and using FTP Adapter to connect to above mentioned servers.
Question: Customer's requirement is to use a single BPEL process to poll all these FTP Servers at a specified date and time. How can we connect dynamically to each FTP server at specified time.
(OR)
Is there any way to change the JCAJNDI dynamically in a FTP Adapter configuration ?
I have seen that FTP Adapter POLL doesnt take any JCA JNDI/hostname/un/pwd/date/time dynamically.
Regards
Pavan

Hi Pavan,
It's possible to change the JNDI dynamically but only when you use put operation where you can control the JNDI name at the time of invoking the FTP Adapter as described in below link.
Dynamic JNDI in FTP Adapter | jca.jndi property not picked by Adapter
However, can you consider using BPEL process with SyncRead (and read files through all the JNDIs in a loop) and scheduling this BPEL process to a desired frequency?
Regards,
Neeraj Sehgal

Cc header in the triggered mail using receiver mail adapter

Hi,
How can we have cc option in the triggered mail using receiver mail adapter.
message protocol is XI payload with mail package.
thanks,
Ramya Shenoy

Hi !
Check this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
under the title:
"Mail Attributes for Message Protocol XIPAYLOAD"
Regards,
Matias
ps:please award points if helpful.

Processing the filename in the payload

Hi,
I am getting the filename in the payload, I want to read that file.
How do I achieve this..
Regards,
Varun

Hi,
For Example if we want to get the Input file name & Directory Details into Target message.
Ex:
I/P File name is :::::231004.xml Ftp Serve Path : //xideveloper/Test_XI/PO
O/P File name can be :::Any thing
Input File : 231004.xml
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_TEST_AGCO xmlns:ns0="http://tafe.test.com">
   <Header>
      <NAME>giri</NAME>
   </Header>
</ns0:MT_TEST_AGCO>
Output File : Out.xml
Here in this output we are able to get the Filename & Directory Info in the FileName_1 Field.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_target xmlns:ns0="http://test.com">
- <Header>
<Name_1>giri</Name_1>
<File_Name_1>231004.xml //xideveloper/Test_XI/PO/</File_Name_1>
</Header>
</ns0:MT_target>
You should capture the Source File name & Directory Info into Target Message.
1)     Write One UDF & Map Like Constant(u201Cu201D)---UDF----FileName_1
2)            In Advanced mode check the check box Set Adapter-Specific Attributes
3)     Check the ASMA Parameters in Sender Adapter Alone
4)             No need to check the check box ASMA in the receiver side
UDF Code:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//for getting filename
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//for getting directory
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","Directory");
/similarly for getting filetype, filesize you need to specify in the above code instead of filename or directory/
String FileName = conf.get(key1);
String Directory = conf.get(key2);
String Cat = FileName+ " "+Directory;
//return FileName;
//return Directory;
return Cat;
Regards
Seshagiri

Dynamically generate terget directory in receiver FTP adapter

Hi guys,
I'm trying to set up a scenario where the file will be placed into a terget directiry based on values from the incoming message. I can't use variable substitution as my target message does not contain the needed value, so I'm trying to set up a dynamic configuration in an UDF. Unfortunately, this is not working.. Any ideas, what could be wrong? The receiver FTP adapter always just takes values from it's configuration. It doesn't help when I try to change it in mapping.
This is the java map code in the UDF:
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
DynamicConfigurationKey key2 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, a);
conf.put(key2, "tfilename.txt");
return "";
Thanks a lot for any help,
Olian

Hi,
use below code it will work fine
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "Directory");
String a=conf.get(key);
String b=conf.get(key1);
var1 = a+b; ;
return var1;
map this udf to root element of your receiver structure.
Regards,
Raj

Prerequisites for Sender and Receiver FTP adapter

Hi Experts,
I am new to PI and configuring simple file to file scenario. I need to know the prerequsites for sender and receiver FTP adapter. Scenario is System A -> XI -> System B .
What I want to know is:
1> What ports need to be opened?
2> Any service that I need to activate?
3> Do I need to install FTP server in any of the machine?
If I have missed something, please add.
Br,
Nilz

Hi,
1> What ports need to be opened?
mentioned in below link as said its 21.
2> Any service that I need to activate?
No
3> Do I need to install FTP server in any of the machine?
THere are two ways by which u can pick ur file.
1) NFS by which u can put the file on XI appplication directory and pick up ur file.
2) FTP u have to put ur file on FYP server and XI will pick up the file from there. U can use freeware FTP and install it on ur Desktop search on goolge u will get ti FTP installtion.
refer the below configuration requirement for FIle adapter.
http://help.sap.com/saphelp_nw04/helpdata/en/69/a6fb3fea9df028e10000000a1550b0/frameset.htm
ALso refer the end to end file to file scenario.
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&
chirag

Receiver FTP Adapter File Size Splitting

Hi,
I am receiving an IDoc from R/3 into XI.
I then map this IDoc into an xml file and use a receiver ftp adapter to drop the files onto a ftp server.
Is there anyway, that I can use the adapter to split the message interface into smaller files. For example, if I were to ftp the message interface into 1 file, the file size would be 1MB. I would like to split the 1 message interface into 4 x 250kb files without having to split the message interface?
Thanks,
Miguel

Hi,
If you split into 4 files each one should be a XML file right?
This is possible without BPM.
Go thro the blog:
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Wat u need to do is make the target side 0..unbounded. If u have 100 records, Map some 25 records in first occurence, 25 in second and so on. This way u can reduce file size.
Regards,
P.Venkat

Receiver FTP Adapter - Directory create

Hello,
the XI FTP Receiver Adapter by default creates the target directory on the FTP Server if it does not exist. The J2SE Engine had an option if you want to create the directory or not.
Is that available in the XI 3.0 J2EE FTP Adapter? I could not find it. Further if that can be set, would the adatper throw an error?
Thanks
Stefan

Hi Stefan,
I'm facing the same issue, while trying to create a dynamic folder in the FTP server.
The FTP adapter failed with the error 'An error occurred while connecting to the FTP server 'ftpserverip:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /root/dynamic/: The system cannot find the path specified. '. For details, contact your FTP server vendor.
Were you able to resolve this issue using any SAP notes?
Thanks in advance.
Thanks,
Joe.

I need to start and stop logging based on a digital input event(or analog if necessary), log data for several seconds prior to the event, and have the data file close at the end of event and increment the filename for the next logging event.

I don't know if this can be done with VI Logger or need to use Labview V7.1.

After browsing through the VI Logger User Manual, it looks like the triggering that you are hoping to accomplish is possible. However, incrementing the filename for the next logging event is not going to be possible. VI Logger does exactly what its name tells - logs data. I don't think the automation that you are hoping to accomplish is possible.
For help with setting up your application, if you do choose to stay with VI Logger, make sure to chek out the Getting Started with VI Logger Manual.
Best of luck.
Jared A

How to get the filename of the active jsp page?

how can i get the filename of the active jsp page?

You could register the JSP [ages in the web.xml and then use the ServletConfig.getServletName.
You could use the JspContex.getServletName which will return the registered name or the name of the servlet class.
You could programmatically add a page context attribute that holds the jsp page name

How to see the filename of the photos available in the iphone without downloading them or connecting to any other device

I am unable to find the filename of the photos available in my iphone 5. How should i get that?

You can't view that on the iPhone natively.
You can, however, import the pictures to your PC or Mac and view the file names there. They should be in the IMG_XXX format.

I need a script that copies the filename into the file

I need a script that copies the filename into 4th column of each line in the text doc file.
I have over 2000 different file names each containing 6 columns and ~50-100 rows.
I can do this manually using this script:
awk '{print $1"\t"$2"t\"$3"\t <name> \t"$6}'
But I would like an automation command or script. Is there any command that I can use instead of <name> that will copy the filename into the column?
Thanks
Monica

Oops, I forgot the redirect to a file. It's not a good idea to edit files in place. A script could fail and you're left with at least one file ruined. It's better to create new files then delete the old files.
for file in *; do
    while read col1 col2 col3 col4 col5 col6; do
        printf "%s\t%s\t%s\t%s\t%s\n" $col1 $col2 $col3 $file $col6
    done < $file > n$file
done
You could narrow the files listed such as
for file in *.tsv
and redirect the new files to another directory. Such as
done < $file > /absolute/path/to/directory/$file

Get only the filename not the full path of the file.

hi to all..
how can i get only the filename of the file not the full path and to be placed on a textinput.?
example:
when i'browse the file and select sample.txt
"C:\Users\user\Desktop\folders\sample.txt" this will be inputted on the textinput.
however, what i want to have is when i'browse and select a file..
textinput should only contain "sample".
does anyone knows how to do it?

Hi cyrus@adobe,
How are you getting the full path of the file when you browse, I dont think for security reasons the Flash Player will aloow to do so. You can only get the file name not the full path of the file when you browse.
Are you using Flex4..?? I am not sure whether this is possible in Flex4..However if you are getting full path and if you wanted to show only the filename then you can just use theString class split function to acehive this..
var fullPath:String = "C:\Users\user\Desktop\folders\sample.txt";
var splitPath:Array = fullPath.split("\");
textInput.text = splitPath[splitPath.length-1];
Thanks,
Bhasker

Retaining the FileName in the Receiver FTP adapter

Similar Messages

Maybe you are looking for