Channels not found
RFC: INTEGRATION_DIRECTORY_HMI working fine. SLDCHECK works fine.
AI_RUNTIME_JCOSERVER, AI_DIRECTORY_JCOSERVER, LCRSAPRFC,SAPSLDAPI, all works fine. CACHE works fine.
But still Communication channels are not found.
No clue where to start dig.
hi
Check this
1 Scenario
This guide deals with all the configurations required to create an IDoc adapter in Exchange Infrastructure
3.0 to send an IDoc from XI to the SAP backend system.
Unlike other types of adapters, the IDoc adapter has dependencies on the XI 3.0 ABAP configurations and
the backend SAP system configurations. Those configurations information will have to be either created
first or retrieved in order to complete the IDoc adapter configuration.
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
The Client must be the client number of the backend SAP system.
Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
Double-click on the business system in the Integration Directory.
Switch to Edit mode.
Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
The RFC Destination is from step 3.1.
The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Regards
Hemant
Award points if find helpful
Similar Messages
-
Getting error while using CAN api's. Says channel not found in MAX.
Hi,
I am using NI-CAN series2, can card. The same is not connected to my system. Hence i have used the virtual channel 256. Here i am reading the DBC file and providing an option to the user to select a set of messages to transmitt\receive. But i am getting an error saying
"Error -1074388479 occurred at CAN Get Channel Data Type.vi
Possible reason(s):
NI-CAN: (Hex 0xBFF62201) Channel not found in MAX or the CAN database file. Solutions: Check for proper spelling using MAX; For Get/Set Property, ensure that the channel name exists in the task."
Please help.
Regards,
YogeshHi Marshall,
Thanx for the reply and spending time for the same. I tried the example which u had mentioned. This example is working with 256 virtual channel. But my code is no executing and giving he same problem even after loading the DBC file into max(Same loaded im my code). Always load the dbc file in max and then only i should run the code, is it so? But this can not happen, since the user may not hav max. I hav attached the code. Pls verify it, and give me the feedback.
Waiting for the reply,
Yogesh
GET
Larsen & Toubro
India
Attachments:
CanMsgFrame.vi 68 KB -
Soap Adapter Channel not found
I'm having problems geting the Sender SOAP adapter to work.
I'm using to test it
http://<XXXXXXXX>:50000/XISOAPAdapter/HelperServlet?action=FindChannel&channel=:SunriseSoftwareSostenuto:TimeSentSoap
where <XXXXXXXX> is our domain
but this returns channel not found
SunriseSoftwareSostenuto is the Service
TimeSentSoap is the communication channel
I've already established that the Soap Adapter is active
Is there something that I've missed ?hi
I've tried to connect to the Soap adapter using
http://xxxxxx:50000/XISOAPAdapter/MessageServlet?channel=:SunriseSoftwareSostenuto:TimeSentSoap
Where SunriseSoftwareSostenuto is the business service and
TimeSentSoap is the communication channel
but get the error code returned below
I've tested the sender agreement/ communication channels config internally and they seem fine
could someone point me in the right direction
is it a java error
or is it a authorisation problem?
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04S_21_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#1 $) -
PI 7.1 RFC Communication Channel not found
Hello,
We have recently upgraded to PI 7.1 and I am having a problem getting my RFC adapter to work. This is the error message:
Error when calling an adapter by using the communication channel CC_UDF_RFC_CALL_TO_PI_ABAP (Party: , Service: IS_D06, Object ID: 5873a160602e3be5866ab820596b752c) The channel with object ID 5873a160602e3be5866ab820596b752c could not be found in the Integration Server Java Cache. Check if the channel exists in the Integration Builder Directory and execute a refresh of the Java Cache
I went to SXI_CACHE and refreshed (Delta nad Complete). I can see that the CC exists in integration builder.
How can I determine what is causing this error?
Thanks,
MattAlso check the cache notification after activating the Comm channel in ID whether cache is properly updating for the changes in the comm channel.
Menu--> Environment --> Cache Notification
If cache notification is proper thentry to refresh CPA cache using following URL and execute ur scenario.
[http://<host>:<port>/CPACache/refresh?mode=full]
Edited by: Samiullah Qureshi on May 14, 2009 8:36 AM -
File not found error in SFTP channel
Hi All,
We are getting a "file not found error " while using a SFTP sender channel .
Our Scenario :
We are using SFTP as the source adapter .Presently we are using two nodes for load balancing for all the sender channels.
One of the node's of the SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
Please let me know, if we did any mistake while configuring the adapter.
Thanks,
YamunanHi,
Could you please check if you have provided right path in your sender communication channel...to pick the file from...
Regards,
Naveen. -
Hi guys. I'm stuck with the class not found error trying to use remote objects with BlazeDS. I'm building the application using flex sdk 3, Ant flexTasks.jar (without FlexBuilder) and Tomcat 5.5.17. The result after clicking on the Remote service button is a window with the following error message: <br />[MessagingError message='The channel class 'mx.messaging.channels.AMFChannel' specified was not found.']<br /><br />In my code, I have in main.mxml:<br /><?xml version="1.0" encoding="utf-8"?><br /><mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"layout="vertical"><br /><mx:Script>..CDATA[import mx.controls.Alert;..</mx:Script><br /><mx:RemoteObject id="remObj" destination="product" result="Alert.show(event.result.toString());" fault="Alert.show(event.fault.faultString);"/><br /><mx:Button id="remoteService" label="Remote Service" click="remObj.getResults('MyName');"/><br /></mx:Application><br /><br />In remoting-config.xml:<br /><?xml version="1.0" encoding="UTF-8"?><br /><service id="remoting-service" class="flex.messaging.services.RemotingService"><br /> <adapters><br /> <adapter-definition id="java-object" class="flex.messaging.services.remoting.adapters.JavaAdapter" default="true"/><br /> </adapters><br /> <default-channels><br /> <channel ref="my-amf"/><br /> </default-channels><br /> <destination id="product" channels="my-amf"><br /> <properties><br /> <source>flex.example.ProductService</source><br /> <scope>application</scope><br /> </properties><br /> <adapter ref="java-object"/><br /> </destination><br /></service><br /><br />In java:<br />package flex.examples.ProductService;<br />public class ProductService{ <br />public String getResults(String name)<br />{<br /> String result = null;<br /> result = "Hi " + name + ", this is a service and the time now is : " + new Date();<br /> return result;<br /> }<br />}<br /><br />The services-config.xml is a standard like delivered within blazeds.war.<br /><br />My guess is that something is wrong is with the compilation. My Ant compile task looks like:<br /> <target name="compile_flex_examples"><br /> <mxmlc file="${param1}" keep-generated-actionscript="true"<br /> context-root="${app.name}" <br /> services="${webinf}/flex/services-config.xml"><br /> <compiler.library-path dir="${FLEX_HOME}/frameworks" <br /> append="true"><br /> <include name="${webinf}/lib/" /><br /> </compiler.library-path><br /> <compiler.library-path dir="${FLEX_HOME}/frameworks" <br /> append="true"><br /> <include name="libs/flex.swc" /><br /> <include name="libs/rpc.swc" /><br /> <include name="libs/utilities.swc" /><br /> <include name="libs/fds.swc" /><br /> </compiler.library-path><br /> <load-config filename="${FLEX_HOME}/frameworks/flex-config.xml"/><br /> <source-path path-element="${FLEX_HOME}/frameworks"/><br /> </mxmlc><br /> </target><br /><br />Any idea why Flex can not find the mx.messaging.channels.AMFChannel class? Any hint very appeciated.<br /><br />Thanks in advance.<br /><br />Devus
Did you have figure out the problem to this?
I am getting the same error message. I had two interdependant applications that were working fine when I specify a service-config.xml file at compire time. However when I try to dynamiclly configure the services at runtime, one application works, but the other doesn't. I'm not sure why mx.messaging.channels.AMFChannel is available in the one app, but not the other.
Any pointers??? -
Class not found - was channel definition question
I am much closer. Tomcat is putting some key messages in the console and I overlooked them. It looks like I am closer than I thought. The request looks like its getting received, but my service blows up on response due to I think two class not found issues. But, I can't tell what classes are missing.
[Flex]Deserializing AMF/RTMP request
Version: 3 null
2.0
(Command method=null (0) trxId=2.0)
null
(Externalizable Object #0 'flex.data.messages.DataMessageExt')
(Array #1)
[0] = (Typed Object #2 'flex.data.messages.DataMessage')
identity = (Object #3)
partId = 81959
operation = 11
correlationId = "419F99AA-B649-9490-650D-88F3CAADBCB7"
headers = (Object #4)
messageId = "8AF6C660-9DE3-F155-6A91-88F3CAC5A4F0"
timestamp = 0
destination = "DocumentPart"
timeToLive = 0
body = (Typed Object #5 'com.hpdocs.ds.document.DocumentPart')
documentId = 81960
partId = 81959
content = "Hello World"
clientId = "05E549ED-455F-A9AF-EEDE-88F3CA7E4BF9"
"DocumentPart"
(Object #6)
DSEndpoint = "hp_rtmp"
DSId = "F65B351A-A60C-6F91-2932-44630DAED2B9"
(Byte Array #7, Length 16) ""
7
[Flex]Received command: TCCommand [ Cmd: 0, MethodName: null, TrxID: 2.0]
[Flex]Serializing AMF/RTMP response
Version: 3
(Command method=_error (0) trxId=2.0)
(Typed Object #0 'flex.messaging.messages.ErrorMessage')
headers = (Object #1)
rootCause = (Typed Object #2 'java.lang.NoClassDefFoundError')
message = "javax/transaction/SystemException"
localizedMessage = "javax/transaction/SystemException"
cause = (Typed Object #3 'java.lang.ClassNotFoundException')
message = "javax.transaction.SystemException"
localizedMessage = "javax.transaction.SystemException"
cause = null
exception = null
body = null
correlationId = "419F99AA-B649-9490-650D-88F3CAADBCB7"
faultDetail = null
faultString = "There was an unhandled failure on the server. javax/transaction/SystemException"
clientId = "F65B3649-620E-C827-50C4-6A1C78BC3712"
timeToLive = 0.0
destination = "DocumentPart"
timestamp = 1.273607998612E12
extendedData = null
faultCode = "Server.Processing"
messageId = "F65B3675-5409-795E-747F-B2F459749415"it looks like your Tomcat is missing the JTA setting.
Tomcat
To use LiveCycle Data Services with Tomcat when not using the integrated Tomcat configuration, install support for the Java Transaction API (JTA). You might also have to install several other libraries depending on the features that you plan to use. Follow these steps after deploying the LiveCycle Data Services WAR files. These steps are not necessary for the integrated Tomcat installation.
Stop Tomcat.
To install support for JTA, a recommended implementation is the Java Open Transaction Manager (JOTM), which is a fully functional open source stand-alone transaction manager.
Download JOTM from http://jotm.objectweb.org.
Copy the JAR files from jotm-root/lib to [tomcat-root]/common/lib.
Create a context file for your web application and register JOTM using the Transaction element. For example, for the samples WAR create a tomcat-root/conf/Catalina/localhost/lcds-samples.xml file and add the following lines:CONTEXT antijarlocking="false" antiresourcelocking="false" docbase="${catalina.home}/webapps/lcds-samples" path="/lcds-samples" privileged="true"> <TRANSACTION factory="org.objectweb.jotm.UserTransactionFactory" jotm.timeout="60"></TRANSACTION></CONTEXT>
Note: If a context file exists for your web application, add the <TRANSACTION> element under the <CONTEXT> element.
Increase the maximum memory to at least 512 MB by specifying the maximum heap size for the JVM in the JAVA_OPTS variable: -Xmx512m
(Optional) To enable custom authentication, locate the Tomcat security resource libraries under install_root/resources/security/tomcat.
Place the flex-tomcat-common.jar and flex-tomcat-server.jar files in the tomcat/lib folder.
Add the following line to the context descriptor file for your web application:
<VALVE classname="flex.messaging.security.TomcatValve"></VALVE>
You can now perform authentication against the current Tomcat realm. Usually, the default configuration for authentication stores user information in conf/tomcat-users.xml. See the Tomcat documentation for more information on realms. See the LiveCycle Data Services documentation for more information on custom authentication.
You might also have to update the active <LOGIN-COMMAND> in /WEB-INF/flex/services-config.xml in each deployment of a LiveCycle Data Services WAR file. For Tomcat, ensure that the TomcatLoginCommand is active in the <SECURITY>section:<SECURITY><LOGIN-COMMAND server="Tomcat"></LOGIN-COMMAND>...</SECURITY>
(Optional) To use the JMSAdapter with the Message Service, install and configure a JMS provider (such as ActiveMQ or openJMS) for use with Tomcat.
Restart Tomcat.
original doc is located here
Hopefully this will help. -
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
Error message "The specified user or domain group was not found" when trying to access certain sites
Hello.
My setup is as such (this is a testing environment), spread over two virtual machines:
-Windows Server 2012 with AD DS and MS SQL Server 2012
-SharePoint Server 2013
When trying to access a lot of site collections in different web applications, I am given this error message. The error message started suddenly appearing, and I do not know what caused it. It started happening after I turned on Request Management Service
Application, though I can't see how that would cause this, and it was not fixed after I turned it off.
I have the necessary permissions, as I have been able to log on to the sites before without any issue. I am using a domain administrator account who is a site collection administrator.
At first I thought it was an issue related to User Profile Service Application, as I was having issues starting the Synchronisation instance. I deleted and re-installed UPS, got synchronisation to work, and it still does not work. I have made no changed
to the AD schema. I have not moved any accounts recently, and I have not deleted any accounts.
Here are the ULS log entries. It seems to have been truncated some.
06/11/2014 10:17:31.94 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|sp\administrator, ClaimsCount=26 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Database ahjqp High [Forced due to logging gap, cached @ 06/11/2014 10:17:31.95, Original Level: Verbose] SQL connection time: 0.0556 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files 00000 High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 3356 byte file stream dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=66.6457 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk4d Medium UserProfileProperty_WCFLogging::Begin ProfilePropertyServiceClient.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk35 Medium MossClientBase_WCFLogging::Begin MossClientBase.ExecuteOnChannel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Portal Server User Profiles ajk36 Medium MossClientBase_WCFLogging:: MossClientBase.ExecuteOnChannel - Executing codeblock on channel acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.02 w3wp.exe (0x1904) 0x1BC0 SharePoint Foundation Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://sp13:32843/44fa09d6891d4d7bb9856a0da10f6a84/ProfilePropertyService.svc' Channel: 'Microsoft.Office.Server.UserProfiles.IProfilePropertyService' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties' MessageId: 'urn:uuid:ec3c0f34-3285-4771-a7a1-24039cb4ced8' acc2999c-dfbc-a0b4-a4e8-f962e574ee66
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC Web Content Management Publishing 7fz3 Medium Setting [Display] as the FormContext.FormMode for the current page dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Mi... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...crosoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.CachedAreaLookup.EnsureLookup(Boolean errorsAsExceptions) at Microsoft.SharePoint.Publishing.CachedAreaLookup.GetCachedAreaOrException() at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetCachedWebInfo(CachedAreaLookup cachedAreaLookup) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigationCache.GetWebNavigationSetting... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...s(CachedAreaLookup cachedArea, CachedAreaLookup& parentCachedArea, Exception& loadError) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettingsList(CachedAreaLookup cachedArea, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](CachedAreaLookup cachedArea, String siteMapProviderName, Boolean includeInheritedSettings, CachedAreaLookup& cachedAreaWithSettings) at Microsoft.SharePoint.Publishing.Navigation.TaxonomyNavigation.GetEffectiveProviderSettings[T](SPWeb web, String siteMapProviderName, Boolean includeInheritedSettings) at Microsoft.SharePoint.Publishing.Navigation.SwitchableSiteMapProvider.GetCurrentWrappedProvider() at Microsoft.SharePoint.Publis... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...hing.Navigation.SwitchableSiteMapProvider.get_RootNode() at Microsoft.SharePoint.Publishing.Navigation.SwitchableDataSourceBehavior.AssignProperties(SiteMapProvider targetProvider) at Microsoft.SharePoint.Publishing.Navigation.PortalSiteMapDataSource.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High DelegateControl: Exception thrown while adding control 'ASP._controltemplates_15_metadatanavtree_ascx': Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyCla... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...im(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.get_Request() at Microsoft.SharePoint.SP... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...Site.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetCachedArea(SPWeb web) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.GetMetadataNavigationHintsForList(SPWeb web, Guid listGuid) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationSettings.GetMetadataNavigationSettings(SPWeb web, Guid sourceListId, Boolean check... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8sl1 High ...WebPropHint) at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.get_NavigationSettings() at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.EnsurePageInitEventHandling(Control controlOnPage) at Microsoft.Office.Server.WebControls.MetadataHierarchyDataSourceControl.OnInit(EventArgs e) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.InitRecursive(Control namingContainer) at System.Web.UI.Control.AddedControl(Control control, Int32 index) at Microsoft.SharePoint.WebControls.DelegateControl.AddControlResilient(Control ctl) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General 8nca Medium Application error when access /SitePages/Home.aspx, Error=Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Runtime tkau Unexpected System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High Getting Error Message for Exception System.Web.HttpUnhandledException (0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(IClaimsIdentity claimsIdentity, String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String fullName) at Microsoft.SharePoint.SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, SPAppPrincipalToken appPrincipalToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...SPSite.get_Request() at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId) at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site) at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext) at Microsoft.SharePoint.Publishing.Internal.WebControls.PublishingRibbon.OnLoad(EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ... System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteS... dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03* w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General ajlz0 High ...tep(IExecutionStep step, Boolean& completedSynchronously) dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.03 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation General aat87 Monitorable dbc2999c-6f92-a0b4-a4e8-f7ed10437e35
06/11/2014 10:17:32.05 w3wp.exe (0x1904) 0x0FAC SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://sp13:80/SitePages/Home.aspx)). Execution Time=97.7205 dbc2999c-6f92-a0b4-a4e8-f7ed10437e35This is a very generic error message.
What user you are trying to search. Are you using username, display name or email address when searching
Was any domain related changed done
What if that users tried to logon to sharepoint site.
Does this error occur with all the account when you click edit? If not, based on the error,
the user account which might be removed from Active Directory or renamed accidentally. Please have a check.
Try to follow below:
http://architectevangelist.wordpress.com/2010/12/07/sharepoint-2010-the-specified-user-or-domain-group-was-not-found/ -
After upgrade to 11.1.1.2 Agreement not found for trading partners
We just upgraded from 11.1.1.1 to 11.1.1.2 and an existing composite that sends a file from Oracle EBS to an outside trading partner is not working.
We tried importing the Agreement from the 11.1.1.2 and when it did not work, we purged the repository and started from scratch.
The error we are getting is:
Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND
This is a file that we are sending from Oracle EBS to an outside trading partner via FTP.
One thing we are noticing is that when we create the agreement, it does not show up under our host TP, it only shows up under the target TP.
We have set up the TP, Channel, and agreements exactly like they are set in the 11.1.1.1 environment.
Here is the log file in debug mode.
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enter
[2010-06-17T07:40:10.479-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">[[
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.486-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] URL ===== aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.514-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send TO Endpoint: 509 aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.522-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():internal=true;aq.sender.queue_name=IP_IN_QUEUE;aq.sender.datasource=jdbc/SOADataSource;aq.sender.queue_payload_col=PAYLOAD;aq.sender.recipients=b2berroruser;
[2010-06-17T07:40:11.356-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send Message Successfully Transmitted
[2010-06-17T07:40:11.377-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.MessageHandler:findInvocationContext trying doc ref
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Exit
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: B2B-50547: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
[2010-06-17T07:40:11.397-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] class oracle.tip.b2b.metric.B2BMessageProperties[[
fromTP : Rheem
toTP : JPMorgan
DocumentProtocol : null
DocumentProtocolVersion : null
DocumentType : JPPositivePay
Agreement : null
MessageSize : 0.0
MessageState : ERROR
FromEndpoint : null
FromEndpointProtocol : null
FromEndpointStatus : null
ToEndpoint : null
ToEndpointProtocol : null
ToEndpointStatus : null
Application : null
Application : null
Composite : null
CompositeVersion : null
Service/Reference : null
]]In another thread Nitesh states:
b2b.documentProtocolVersion is missing in your properties and b2b.toTradingPartnerId is not set properly.
Below are the property, you should set in composite:
b2b.documentTypeName = <doctype>
b2b.documentProtocolVersion = <docRevision>
b2b.fromTradingPartnerId = <HostTPName>
b2b.toTradingPartnerId = <RemoteTPName>
b2b.messageType = <msgType>
If you want to identify TP based on Identifier then use below for TP:
b2b.toTradingPartnerId = <AS2 Identifier Value>
b2b.toTradingPartnerIdType = <AS2 Identifier>
We are setting the b2b.documentProtocolVersion variable in BPEL:
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Key : b2b.documentProtocolVersion
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Value : 1
Edited by: robn77 on Jun 17, 2010 5:27 AM -
Quicktime gets a file not found error in running of set up. tried downloading twice
Quicktime gets a file not found error in running of set up. tried downloading twice
Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
"file not found" error in VI Logger when running an imported VI Logger task
I'm having trouble getting all of my imported tasks to run in VI Logger.
I'm using VI Logger 2.0, with an SCXI-1100. The data acquisition tasks I import run fine. One of the VI Logger tasks I've imported runs OK, but the other one gives an error:
"Engine Error!
Error Code = 7
LabView: File not found. The file may have been moved or deleted, or the file path might be incorrectly formatted for the OS."
If I create a new VI Logger task, the new task works OK. And my 1st VI Logger task to be imported works OK. So I know my setup mostly works. But our company has never been able to figure out importing tasks very well, so I'm looking for help.
Question 1: What file is LabView looking for? I've checked my Export path and database path, and they are identical in both the working task and the non-working task.
Question 2: Where else might I look for the difference between the 2 VI Logger tasks? Neither task uses any weird characters in the name, both have analog input channels and calculated channels. And I've mixed and matched the data acquisition tasks with no change (the good VI Logger task will run with either data task, the bad VI Logger task won't run with either data task), so I'm pretty sure the problem is in the VI Logger task, and not the data task. I've also tried importing the 2nd task on its own, as a separate import function, but that gave the same error.
Thanks for the help in advance,
JakeHi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task. I've attached the file. The "1 channel" task runs OK. The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip 353 KB -
EPM 11.1.2.3 ,Error 404 - Not Found
Hi All,
I am getting the following error after my installation and configuration of EPM 11.1.2.3 and when I try to access the Workspace URL.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol --
HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the
Request-URI. No indication is given of whether the condition is temporary or
permanent.
If the server does not wish to make this information available to the client,
the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code
SHOULD be used if the server knows, through some internally configurable
mechanism, that an old resource is permanently unavailable and has no forwarding
address.
I installed 11.1.2.3 in windows 7 ultimate OS and 64 bit and using sql server 2005 Database and configured Essbase,planning, hfm, arm, fcm,fdm ,hpcm, , everything was configured successfully but when I open the workspace URL it is throwing "Error 404 not found"
I tried accessing http://machinename:7001/console (I replaced machinename with my machinename)
even here I am getting the same error, but I checked the database and it has the table hss_component_types and it is populated with the various products.
could you guide me
Regards,
SG
The following is the error I am getting in C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Jul 9, 2013 7:30:18 PM CDT> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\audit-client.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\css.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ctg_custom.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\ldapbp.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\opencsv-1.8.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\registry-api.jar;C:\Oracle\Middleware\user_projects\domains\EPMSystem\lib\wlpool.jar>
<Jul 9, 2013 7:30:18 PM CDT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 from Oracle Corporation>
<Jul 9, 2013 7:30:47 PM CDT> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<Jul 9, 2013 7:30:57 PM CDT> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://SUBHASUBBU:7001.>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
<Jul 9, 2013 7:30:57 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Jul 9, 2013 7:30:57 PM CDT> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log.>
<Jul 9, 2013 7:30:58 PM CDT> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\EPMServer0.log is opened. All server side log events will be written to this file.>
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 8349
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as CN=Entrust.net Secure Server Certification Authority
Processing TP 1
Storing TP 1 as CN=Entrust.net Secure Server Certification Authority 1
Processing TP 2
Storing TP 2 as CN=Entrust.net Certification Authority (2048)
Processing TP 3
Storing TP 3 as CN=GTE CyberTrust Global Root
Processing TP 4
Storing TP 4 as OU=Secure Server Certification Authority
Processing TP 5
Storing TP 5 as OU=Class 1 Public Primary Certification Authority
Processing TP 6
Storing TP 6 as OU=Class 2 Public Primary Certification Authority
Processing TP 7
Storing TP 7 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
OracleFileSSOWalletImpl.getWalletData: enter...
OracleFileSSOWalletImpl.getWalletData: System.getProperty(user.name)=SUBHASUBBU$
OracleFileSSOWalletImpl.getWalletData: locking (shared) dummy sso file..
OracleFileSSOWalletImpl.getWalletData: locking (shared) sso file..
Oracle Wallet: wallet size 3941
OracleWallet: getSecretStore
OracleSecretStore: loading wallet from stream
OracleSSOKeyStoreImpl: engineLoad
OracleKeyStoreSpi: Loading wallet from stream
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: found cert bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: found secret store bag
OracleKeyStoreSpi: Opening safe 0
OracleKeyStoreSpi: Opening safe 0
Processing TP 0
Storing TP 0 as OU=Class 1 Public Primary Certification Authority
Processing TP 1
Storing TP 1 as CN=GTE CyberTrust Global Root
Processing TP 2
Storing TP 2 as OU=Class 2 Public Primary Certification Authority
Processing TP 3
Storing TP 3 as OU=Class 3 Public Primary Certification Authority
OracleKeyStoreSpi: Storing Secret0
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret1
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret2
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Storing Secret3
Getting sequence from bag
Getting alias from sequence
Getting secret from sequence
OracleKeyStoreSpi: Keystore Loaded
OracleWallet: getSecretStore
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Jul 9, 2013 7:31:19 PM CDT> <Notice> <Security> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\security\boot.properties>
<Jul 9, 2013 7:31:41 PM CDT> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EPMServer0 has been migrated to backup server and the backup server is accessing the TLOG of EPMServer0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<Jul 9, 2013 7:31:42 PM CDT> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log00002. Log messages will continue to be logged in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\logs\access.log.>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Jul 9, 2013 7:32:18 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
Using OraclePKI Provider
javax.net.ssl.TrustManagerFactory supported
javax.net.ssl.KeyManagerFactory supported
Using OracleJSSE103 Provider
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source accountreconciliation_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:32:21 PM CDT> <Warning> <JDBC> <BEA-001552> <The logging last resource (LLR) data source financialclose_datasource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<Jul 9, 2013 7:33:42 PM CDT> <Warning> <Security> <BEA-090668> <Ignored deployment of role "Admin" for resource "type=<url>, application=DMS Application#11.1.1.1.0, contextPath=/dms, uri=/">
<Jul 9, 2013 7:33:47 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'ACCOUNTRECONCILIATION [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:12 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'RuleService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\aps\AppServer\InstallableApps\Common\aps.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:34:13 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\APS_11.1.2.0\mizf54/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:35:15 PM CDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'FINANCIALCLOSE [Version=11.1.2.0]' due to error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false]..
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.soa.workflow.wc, exact-match: false].
at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
Truncated. see log file for complete stacktrace
>
<Jul 9, 2013 7:35:44 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: com/oracle/adfm, Specification-Version: 1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\FMADFWEB_11.1.2.0\nw1g9o]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:35:49 PM CDT> <Warning> <EJB> <BEA-010001> <While deploying EJB 'ActionsService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Jul 9, 2013 7:36:57 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element web-app in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\SHAREDSERVICES_11.1.2.0\dt7o9d\interop.war/WEB-INF/web.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\odi\setup\manual\oracledi-agent\oraclediagent.ear/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <Munger> <BEA-2156203> <A version attribute was not found in element application in the deployment descriptor in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y/META-INF/application.xml. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject descriptors that do not specify the JEE version.>
<Jul 9, 2013 7:38:12 PM CDT> <Warning> <J2EE> <BEA-160140> <Unresolved optional package references (in META-INF/MANIFEST.MF): [Extension-Name: oracle.bam.odi.library, Specification-Version: 11.1.1, referenced from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EPMServer0\tmp\servers\EPMServer0\tmp\_WL_user\oraclediagent\cn250y]. Make sure the referenced optional package has been deployed as a library.>
<Jul 9, 2013 7:38:13 PM CDT> <Emergency> <Deployer> <BEA-149259> <Server 'EPMServer0' in cluster 'EPMServer' is being brought up in administration state due to failed deployments.>
Hyperion Provider Services - Release 11.1.2.3.4408
Copyright (c) 1991, 2013 Oracle and / or its affiliates. All rights reserved.
connection mode : HTTP
essbase.properties: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0/bin/essbase.properties
java System properties -DESS_ES_HOME: C:\Oracle\Middleware\EPMSystem11R1/common/EssbaseJavaAPI/11.1.2.0
Mode: Non Fusion read from Registry
registry.isRegistryDatabaseCreated()true
Registry was initialized sucessfully
Component was found from component type DISC_MAN_PRODUCT
Updating version Disclosure_dbVersion with DISC_MAN_PRODUCT
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 46
Essbase® Administration Services - Version 11.1.2.3.000.4415
Copyright © 1991, 2013 Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. No portion hereof may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or information storage and retrieval systems, for any purpose other than the recipient's personal use, without the express written permission of Oracle.
US Patent Number 5,359,724
US Patent Number 6,317,750
Current time stamp: Tue Jul 09 19:38:54 CDT 2013
Server started successfully
Waiting for client requests
HRContextListener::contextInitialized
Warning: Starting ADF Library jar post-deployment on WebLogic Server. Is "provider-lazy-inited" init-param missing from LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not being used.
Started: ADF Library non-ADFJspResourceProvider post-deployment
Finished: ADF Library non-ADFJspResourceProvider post-deployment (millis): 203
- WEBLOGIC
null
- The AMHM configuration file path is..nullconf
- getting attributes for bsp.jsr: [Migration, Ant-Version, Manifest-Version, Created-By, Version]
- going to get value for Migration attribute
- Encryption Type : AES
- Invocation of generateSecurityFile Successful
- userName :
- ServiceID :
- applicationName :
- Configuration File (config.xml) does not exist under C:\Oracle\Middleware\user_projects\epmsystem1\Planning\planning1\config.xml Process aborted.
- Migration Failed
Utf8Filter: forceRequestCharacterEncoding set to true (init-param=true)
Utf8Filter: repairRequestParameters set to false (init-param=false)
Utf8Filter: rebuildPathInfo set to false (init-param=false)
Utf8Filter: revertRequestURI set to true (init-param=true)
Utf8Filter: settings are true/false/false/true
Initializing CORBA ORB.
CORBA ORB initialization complete.
Loading configuration from registry
WSBaseServlet.setDefaultGSMContext(): Servlet GSM context. host=192.168.204.1:6800
Log configuration: file:/C:/Oracle/Middleware/user_projects/epmsystem1/ReportingAnalysis/RAFrameworkWebapp/WEB-INF/logging.properties
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
<Jul 9, 2013 7:39:39 PM CDT> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EPMServer.>
<Jul 9, 2013 7:39:44 PM CDT> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on fe80:0:0:0:0:5efe:c0a8:ed01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[9]" is now listening on fe80:0:0:0:0:100:7f:fffe:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[13]" is now listening on 0:0:0:0:0:0:0:1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:c0a8:cc01:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:c0a8:7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[12]" is now listening on 127.0.0.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[8]" is now listening on fe80:0:0:0:3415:3499:e650:c29e:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[10]" is now listening on fe80:0:0:0:2d02:d309:55d5:a150:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[11]" is now listening on fe80:0:0:0:5894:d88c:c022:f32b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 192.168.204.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 192.168.0.7:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on fe80:0:0:0:c885:cffb:be7a:3e0b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:1d4d:5292:d06b:f62b:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.237.1:9000 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
<Jul 9, 2013 7:40:09 PM CDT> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EPMServer0" for domain "EPMSystem" running in Production Mode>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <Server> <BEA-002611> <Hostname "SUBHASUBBU", maps to multiple IP addresses: 192.168.204.1, 192.168.237.1, 192.168.0.7, fe80:0:0:0:c885:cffb:be7a:3e0b%18, fe80:0:0:0:1d4d:5292:d06b:f62b%20, fe80:0:0:0:3415:3499:e650:c29e%15>
<Jul 9, 2013 7:40:09 PM CDT> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Jul 9, 2013 7:40:11 PM CDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:16 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM V8_VERSION WHERE 1 = 0" set up for pool "raframework_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:11:54 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,190 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:04 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,198 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:19 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on 0:0:0:0:0:0:0:1:54,216 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSS_COMPONENT_TYPES WHERE 1 = 0" set up for pool "EPMSystemRegistry" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM ARM_ATTRIBUTES WHERE 1 = 0" set up for pool "accountreconciliation_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM AIF_LOOKUP_MAPPINGS WHERE 1 = 0" set up for pool "aif_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool "calc_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:41 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DISCMAN_COUNTER WHERE 1 = 0" set up for pool "discman_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM SERVERLOGID WHERE 1 = 0" set up for pool "eas_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM FCC_USER_ATTRIBUTES WHERE 1 = 0" set up for pool "financialclose_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REP" set up for pool "odiMasterRepository" failed with exception: "java.sql.SQLException: [FMWGEN][SQLServer JDBC Driver]Object has been closed.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "select count(*) from SNP_LOC_REPW" set up for pool "odiWorkRepository" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HSPSYS_CLUSTER WHERE 1 = 0" set up for pool "planning_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:12:46 PM CDT> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM HPM_APPLICATION WHERE 1 = 0" set up for pool "profitability_datasource" failed with exception: "java.sql.SQLNonTransientConnectionException: [FMWGEN][SQLServer JDBC Driver]socket write error: Connection reset by peer.".>
<Jul 9, 2013 8:18:49 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,579 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:22:29 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:54,820 during the configured idle timeout of 5 secs>
<Jul 9, 2013 8:29:44 PM CDT> <Warning> <Socket> <BEA-000449> <Closing socket as no data read from it on fe80:0:0:0:c885:cffb:be7a:3e0b:55,178 during the configured idle timeout of 5 secs>First of all "I installed 11.1.2.3 in windows 7 ultimate OS", it is not a supported OS so if you want assistance problem solving you should stick with a supported OS.
It also looks like you have installed a whole range of products some requiring additional configuration and the requirement of SOA.
I recommend starting with a support OS and only install products that are required.
Cheers
John
http://john-goodwin.blogspot.com/ -
I have just installed the FIM portal into my test environment. The synchronisation service was already working perfectly (can provision users from a .csv file).
The FIM Service and Portal are installed on a server (we'll call it SPF1), and the FIM sync service on another server (SYNC1)
Whenever I try to log on to the fim portal with my standard user account (it has never worked), I get the following error:
Unable to process your request.
Please contact your help desk or system administrator.
Error processing your request: The server was unwilling to perform the requested operation.
Reason: The requester of this operation is invalid.
Correlation Id: 7da76fce-5c9a-4596-90f7-8d7243c21de8
Details: The requestor's identity was not found.
>Go to Forefront Identity Manager home page
(The web page header does show the FIM logo, so the portal itself is there).
In the ForeFront logs on SPF1, I get the following:
Log Name: Forefront Identity Manager
Source: Microsoft.ResourceManagement
Date: 1/13/2015 5:48:08 PM
Event ID: 3
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SPF1.testdomain.internal
Description:
GetCurrentUserFromSecurityIdentifier: No such user TESTDOMAIN\StandardUser, S-1-5-21-1(sid goes here)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft.ResourceManagement" />
<EventID Qualifiers="0">3</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-14T01:48:08.000000000Z" />
<EventRecordID>523</EventRecordID>
<Channel>Forefront Identity Manager</Channel>
<Computer>SPF1.testdomain.internal</Computer>
<Security />
</System>
<EventData>
<Data>GetCurrentUserFromSecurityIdentifier: No such user TESTDOMAIN\StandardUser, S-1-5-21-1(sid goes here)</Data>
</EventData>
</Event>
Log Name: Forefront Identity Manager
Source: Microsoft.ResourceManagement
Date: 1/13/2015 5:48:08 PM
Event ID: 3
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: SPF1.testdomain.internal
Description:
Requestor: Internal Service
Correlation Identifier: da87f241-eee5-4bf5-b1dd-8a6728a2c627
Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: IdentityIsNotFound
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetUserFromSecurityIdentifier(SecurityIdentifier securityIdentifier)
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUser()
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Enumerate(Message request)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft.ResourceManagement" />
<EventID Qualifiers="0">3</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-14T01:48:08.000000000Z" />
<EventRecordID>522</EventRecordID>
<Channel>Forefront Identity Manager</Channel>
<Computer>SPF1.testdomain.internal</Computer>
<Security />
</System>
<EventData>
<Data>Requestor: Internal Service
Correlation Identifier: da87f241-eee5-4bf5-b1dd-8a6728a2c627
Microsoft.ResourceManagement.Service: Microsoft.ResourceManagement.WebServices.Exceptions.UnwillingToPerformException: IdentityIsNotFound
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetUserFromSecurityIdentifier(SecurityIdentifier securityIdentifier)
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.GetCurrentUser()
at Microsoft.ResourceManagement.WebServices.ResourceManagementService.Enumerate(Message request)</Data>
</EventData>
</Event>
Further, I note that it has trouble connecting to the web exchange connector. I wonder if this is because I used an alias (for easy migration in the future) for which the certificate does not match the name for? I'm connecting to "mail.testdomain.internal",
although that's actually a NLB group between two CAS/HUB servers.
Log Name: Application
Source: Microsoft.ResourceManagement.ServiceHealthSource
Date: 1/13/2015 7:43:49 PM
Event ID: 12
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: SPF1.testdomain.internal
Description:
The Forefront Identity Manager Service cannot connect to the Exchange Web Service.
The connection failure may be due to a network failure, firewall configuration error, or other connection issue. Additionally, the failure may be due to incorrect Exchange Web Service configuration.
Verify that the Exchange Web Service is reachable from the Forefront Identity Manager Service computer. Ensure that Exchange is running, that the network connection is active, and that the firewall is configured properly. Last, ensure that the
Exchange Web Service configuration is correct in the Microsoft.ResourceManagement.Service.exe.config file.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft.ResourceManagement.ServiceHealthSource" />
<EventID Qualifiers="0">12</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-01-14T03:43:49.000000000Z" />
<EventRecordID>7581</EventRecordID>
<Channel>Application</Channel>
<Computer>SPF1.testdomain.internal</Computer>
<Security />
</System>
<EventData>
<Data>The Forefront Identity Manager Service cannot connect to the Exchange Web Service.
The connection failure may be due to a network failure, firewall configuration error, or other connection issue. Additionally, the failure may be due to incorrect Exchange Web Service configuration.
Verify that the Exchange Web Service is reachable from the Forefront Identity Manager Service computer. Ensure that Exchange is running, that the network connection is active, and that the firewall is configured properly. Last, ensure that the
Exchange Web Service configuration is correct in the Microsoft.ResourceManagement.Service.exe.config file.</Data>
</EventData>
</Event>
I'm not really sure where to start investigating at this point. The only other thing to note is that after installing the portal, I didn't see a new management agent in the synchronization service (I thought one was supposed to appear, though I could
be mistaken).I eventually figured this out - it was that the portal management agent hadn't been created yet, I had to create it.
-
I can no longer print via wifi. I could at one time but now I have to connect to printer with USB. All settings appear correct in printer and macbook. Sys pref shows printer with green light next to idle. Sending a print prompt results in "searching for printer, printer not found, ensure printer is turned on". I have reinstalled printer in my print list and reinstalled printer software on macbook. Kodak 5250 AiO printer shows it's configured for and on wifi channel. I go online with laptop using wireless but cannot print. Help!
If you know the IP address of the printer, then you can check if there is a working path between the Mac and printer. This can be done using Network Utility or a web browser.
If you open Network Utility and select the Ping tab, you can enter the IP address of the Kodak and then press the Ping button. If there is a working connection then you should get a reply to each packet sent.
With the web browser, many devices have a built-in web server so you can type the IP address of the printer into the browser and if there is a working connection then you will open the printers web page.
So, are you able to confirm you have a working connection between the Mac and printer?
Maybe you are looking for
-
Can I use a different mail client to "Send a Copy" from Pages?
One of my favorite Pages features is its ability to send someone a copy of your document in Pages, Word, PDF, or ePub format via email with only a couple clicks in the "Share" button. But this feature only works if Mail, Apple's email client, is set
-
Hello, I'm new in Apple Support Communities Most of my e-mail goes to Junk e-mail..! I have tried the rules suggestion as soluiton of the problem, but I don't see any rules to be removed. I went to the Apple store and they couldn't resolve the proble
-
Dear Experts, Please any one can help me i am getting one security issue.Some third party tools using and hacking the Request and Response of the Server.That time there taking one successfully Request (GET http://1.1 302 found) and Response (http:/
-
Different display types in same column
Hi All, I though I was being clever, but maybe not... I have a query which generates a column. I want the column to show a select list from query when the user has update permission for the row, otherwise I want to show the value of the column only.
-
TS1398 Why does the internet connection appear to be offline with stronger WiFi signal?
I purchased new iPAD 3 generations 32 GB last Monday so i did click iCloud on left side to open the page but it indicated "Verification Failed - the internet connection appears to be offline" at home while WiFi icon shows stronger but problem with th