Chapter id description

Hi,
What are the different table from which we can details regarding
Both chapter id & descritpion

Hi
Sap SD
U can see the ch id and its discription in Tocde J1ID --- Chapter-Id.
And the same u can see in table J_1IVCHID field J_1ICHID for Ch Id and
for discription J_1ICHT1.
Thx.

Similar Messages

Description copying from j1id

Hi,
In J1ID for chapter id & description wil be maintained
say
9999 xxxxxxxx description
NOw requirement is
Description in J1id must get copied to
SALE ORDER -HEADER -TEXT TAB (invoice header text type)
Pl Suggest how to do this

Hi,
isn't is possible without abap development.
any other alternatives
Is there any other table where in we can get chapter id description i meam matmaster etc
in order to achieve this requirement
Pl suggest

Cin in sales and distribution

hi,
can any one tell me the role of CIN in sales and distribution, if possible
post some material regarding CIN configuration.
my e-mail id: [email protected]
thank you.

Hello Sriram,
CIN in other words "Country Version India" is basically used for taxation purposes. Every country has its own tax system..........so SAP has come up with its own country versions for taxation like CIN for India.
<b>The following is the detailed notes on CIN:</b>
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure of Data ScreenMaterial Master Configuring the Material master Screen Sequence. for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
<b>Reward if helps</b>
Regards,
Sai

Upgrading the GPU, CPU and RAM of my Laptop n201ax

This maybe is a really long post but please answer because i really need answers for each one of these questions and i really want to upgrade my laptop to the best configuration If i Can.Let me make this clear first.* In the upcoming content the words "this laptop" always refers to Hp Pavilion 15-n201ax*
Okay so first of all i read somewhere that the maximum Ram of this laptop can be expanded till 16gb but the i came up with this link here -http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/I-would-like-to-upgrade-memory-of-my-laptop-HP-15-n201ax/td-p/5146905 And then i came to know that it can only be upgraded to 12gb by reading Page #2 Chapter 1 Description of this Guide-http://h10032.www1.hp.com/ctg/Manual/c04438537.pdfFirst of all i would like to ask is that, 1. Can i buy a ram of any brand but ofc the same clock speed ie 1600mhz?, so can i go for the GSkill 4gb 1600Mhz DDR3 ram?2. Does the size matter to the respective slots? or i can install the 8gb and 4gb ram in any alternate slots? So this was all about the RAM But i need to know if i can change the discrete GPU and APU of this laptop3. And if Yes - Which are the compatible mobile GPU's that i can install by removing the previous one ie AMD 8600M (For example the R9, R7 and R5 Laptop graphics)4. And Which are the compatible APU's that i can install by removing the previous APU ie AMD A10-4655M APU (For example the AMD FX APU for Laptops)5. If i can upgrade the GPU and APU both please tell that does the compatibility matters? like only a specific GPU can work with a specific APU ie like in this laptop AMD A10-4655M APU + AMD 8600M GPU. Please Help Me out, Please.Thanks in advance.

Huffer wrote:
Pavilion 15-n201ax? We are going to need to refer to the Service Manual here: Your Service Manual Officially, it only supports 12 gigs. Your model has a single 8 gig module so you have an open slot. Unofficially, may users here have reported that adding another 8 gigs to make a total of 16 gigs will work fine. But that is something you take the risk of doing, since it is unofficial. The part numbers for the proper memory are listed on page 42. You need DDR3L-1600 SO-DIMM. If you are going to go official, the 4 gig module is: 691740-001 This is it on amazon.com: http://www.amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/dp/B00CI08FX4/ref=sr_1_1?ie=UTF8&qid=1437948185&sr=8-1&keywords=691740-001 You should just leave the 8 gig where it is and add the new memory in the open slot. On your model laptop, the GPU/APU is soldered to the motherboard. In order to do any upgrade you would need to buy a new motherboard. You have a whole incorrect idea that the GPU/APU can be removed and replaced and this is incorrect. The term APU means a processor that has video built in so the whole question about compatibility between GPUs and APUs just misses the mark. On some systems the GPU/APU is socketed and can be replaced which serves to replace/upgrade both the processor and video function but as stated above, on yours this involves pulling and replacing the whole motherboard. There is a slightly better processor/graphics available using the AMD A10-5745M 8670M (2.9 GHz/2.1 GHz, 2 GB L2, 1333MHz DDR3L Quad 25W) for use with Windows Standard. The motherboard part is 734824-501 HP does not stock the board but I found this online: http://www.discounteddealz.com/product.asp?itemid=327740&gclid=CO78y6rn-cYCFQmCaQodOP0GLQ Never heard of this seller and can't vouch but the price is very reasonable for that board. I expected it to be quite a bit more which makes me wonder about this seller a bit. I would advise keeping what you have. It is very strong for AMD and upgrading to the A10-5745 board will only result in a very small uptick in performance at a very high cost in money and effort. If this is "the Answer" please click "Accept as Solution" to help others find it. Hey sorry but i should have mentioned this before, I live in India and the links you provided are for amazon.comi tried to search on amazon.in and eneded up with this http://www.amazon.in/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=HP+691740-001+4GB%2C+1600MHz%2C+PC3L-12800+DDR3L+DIMM&rh=i%3Aaps%2Ck%3AHP+691740-001+4GB\c+1600MHz\c+PC3L-12800+DDR3L+DIMM Instead, can i get this one ? beacuse the hp one on the above result costs 41% more than the Transcend one below and that's very much http://www.amazon.in/Transcend-4GB-DDR3L-1600-LAPTOP/dp/B00B5LOOJG/ref=sr_1_2?s=computers&ie=UTF8&qid=1437984575&sr=1-2&keywords=ddr3l+4gb+1600mhz And last thing is that Will the performance be better if i go for Ram branks like Corsair or GSkill same types of memory?

What are the questions they will ask for CIN point of view?

hi,
if anybody will have material for CIN configuration settings and questions
for this point of view.
thanks to all.

Hi Arunteja,
Basically Cin is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make for Logistics General, by India the settings in Customizing Basic Excise Duties Usingchoosing Taxes on Goods Movements Account Settings Determination.Condition Technique and
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate access from the SAP EasyMaintenance screen, which you can Master Data Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
 1. Go to IMG Define Structure of Logistics General Material Master Configuring the Material master Screen Sequence.Data Screen for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
Hope this slove your pupose and Please reward if really Helpful,
Thanks and Regards,
Sateesh.Kandula

Questions about Portfolio & cProject in Netweaver portal

Dear All
My Company installed SAP NetWeaver Portal and the business package BP_PPM_DC 450.700 SP7
Now I can use SAP Portal with only 3 menus:
Portal Content
User Admn
System Admn.
But I cannot see:
Project Management
Innovation Mgt
My innovation work
Portfolio Mgt
and so on, like I can see it from standard documentation
What I need also ?
Thanks to all
Salvo50

Hi,
please see the cProjects 4.5 FAQ notes 1088160 and 938390. There, you'll find information where to find the documentation.
Direct access:
[http://help.sap.com/saphelp_ppmdc450/helpdata/en/index.htm|http://help.sap.com/saphelp_ppmdc450/helpdata/en/index.htm]
See especially chapter "Technical Description and Configuration Information".
Kind regards,
Florian

Urgently required CIN

Dear friends,
please send me complete details for the CIN.
[email protected] / [email protected]
Regards,
vishal

Basically Cin can be done in two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important point is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
COUNTRY INDIA VERSION (CIN 3.0A)
Overview of CIN 3.0A
Master Data
Procurement
Register Printing
Overview of CIN 3.0A
Add-on Component for SAP R/3 4.6B to handle India Specific Requirements
Handles Tax Implications during Procurement and Sales Cycle
Excise Duty
CENVAT
Sales Tax
Octroi
Handles Tax Deduction at Source (TDS)
Maintenance & Printing of statutory ledgers
CIN Excise Tax Engine provides
Various types of Excise Duties (BED, AED, SED) & Cess
Exceptional Rates
Concessional Rates based on Forms
Assessable value
Different base value for Excise & Sales Tax
Vendor and Customer Status
Excise Concession forms tracking
Controlled JV transactions to handle exceptions
Master Data
Excise Registration
Excise Group / Series Group
Manufacturing / Depot
Excise rate maintenance based on
Chapter ID
Vendor/Customer Status
Plant Status
Assessable value for semi-finished / finished Goods
GL Account Assignments
Procurement
Capture Excise Invoice
Multiple GRs per Excise Invoice
Capture of CVD
Posting of CENVAT Credit
Register Update (Plant / Depot)
Invoice Verification with Excise and CVD
Cancellation of GR will pass the adjustment entries in part 1 register
Option to take partial credit with multiple GR
Register Printing & Reporting
RG23A Part I , Part II
RG23C Part I , Part II
RG23D , RG1 , PLA
57AE monthly Returns
Annexure IV
Sales Tax Register
RT 12 Returns
TDS Certificates and Annual Returns
MASTER MAINTENANACE.:
Transaction Code : J1ID
1. Chapter id Description Master : - Excise chapter id and description as per law will be maintained in this master. With out maintaining the chapter id in this master we can not proceed to other masters. Maintain the chapter id in format xxxx.xx
2. Material / Chapter id combination :- Excisable materials with chapter id details for a plant is maintained in this master. In case of Raw and Packaging materials we will be maintaining for branch plant only. But in case of FG even CPs details will be maintained. If the material is a base material used for subcontracting then give a tick in the check box in the coloumn subcontrs. Choose relevant material type from drop down menu. In the coloumn GR-xref, select Multiple GR for one Excise invoice-Multiple credit from the drop down menu. Enter 1 in the declared coloumn. With out this value in this coloumn the material will not be subjected to excise procedures.
3. Material assessable Value:- In this master, plant wise (including CP plants) assessable values for FG are to be maintained. MRP per CBB and per ATC will be enetred in Net dealer price coloumn. Assessable value per CBB and per ATC will be given in Assessable value coloumn with effective date in the valid from coloumn. Since it is not possible to maintain differential MRP for the same SKU in this master, the MRP and Assessable value details for despatches from branch plant will be maintained in SD module. In this case we should not maintain the details in this master for branch SKUs and details will be maintained only for CPs.
4. CENVAT determination :- Plant wise MODVAT input materials will be listed in this master with one of the FG as the out put material. This master will be maintained for branch plants only. If the input material is not maintained in this master MODVAT credit can not be availed.
5. Vendor Excise details: - Vendor Excise details such as ECC no, reg no, Exc.range, Exc.div, Exc.coll, CST, LST nos, PAN no will be maintained for all Excisable materials vendors. In the coloumn Exc.ind.ve enter 1. With out this value in this coloumn the MODVAT procedure will not take place. We are not maintaining SSI status in this master.
6. Customer Excise details:- For such of those customers for whom invoices are to be raised from branch plant details are to be maintained in this master. The excise details can be blank for customers bur CST and LST no are to be entered. In the coloumn Exc.Ind.Cus. Enter 1. With out this value in this coloumn, Excise invoice will not be generated for the customer.
7. SSI rate: - We will not be maintaining this master. At the time of capturing the MODVAT details we can enter actual duty details as per the Excise invoice received from the Vendor.
8. Excise indicator for Plant:- Excise details such as ECC no, Range etc. for the branch plant will be maintained here. In the coloumn Exc.ind.co maintain a value1
9. Excise indicator for plant and vendor and Excise indicator for plant and customer: - Initial Configuration masters need not be maintained by users.
10. Excise tax rate: - Chapter id and tax rates combination is maintained in this master. In the ExcInd coloumn enter1.
11. Cess rate:- Cess rate if applicable will be maintained in this master.
12. Exceptional material excise rates:- If differential excise rates are applicable for a material falling under same chapter id , this master will be maintained.
13. Quantity based AED & SED: - If applicable the details will be maintained here.
Some of the check points pertaining to Masters.
For raw materials, the assessable value will be picked up from PO.
For FG, the assessable values only for CPs are to be maintained in this master.
Excise indicator in Vendor / Customer excise details is mandatory.
Chapter ID, material Chapter ID and Excise tax rates - should contain all the relevant tax details.
CENVAT determination correlates the raw material to finished goods. All new materials are to be added without fail.
Material Chapter ID - for conversion activity (only base matl.) sub-contracting indicator has to be checked.
Material Chapter ID- excise indicator is to be ticked.
For removals from branch plant (raw material/finished goods), CST/LST numbers have to be given in the customer masters, which is used in Excise invoice printing
Path is : IMG - Logistics General - Tax on goods movement - India
Apart from this please go through the following link for further information
http://help.sap.com/saphelp_47x200/helpdata/en/5a/d34a9f544811d1895e0000e8323c4f/frameset.htm
Hope this will helps you and please reward if really helpful
Thanks and Regards,
Sateesh.Kandula

Formatting text in chapter descriptions

I'm having difficulty creating paragraphs and line breaks in my podcast chapter descriptions. I tried using
br,/br
br /
p,/p
and nothing seems to work. Any suggestions?

Stephen Schulte2 wrote:
Sagesse wrote:
To quote text, put "> " (without quotes) in front of the text you want indented.
OK I used the ' " ' to put your message into a box at the start of mine, but I don't seem to be able to use the ">" to "indent" my text... For example-- the following is not indented: >So now I am putting this text here in quotes, let's see via PREVIEW.
No, that doesn't seem to do anything...
Steve
You have to put the > character at the beginning of a line.
Alternatively, you can use this HTML to set off text as a blockquote without the background:
<blockquote style="margin-left: 50px;">Quoted text goes here</blockquote>
Which will render your text like this:
Quoted text goes here
You can add your own background color like this:
<blockquote style="background:lightblue; border:1px solid black; padding:3px; margin-left: 50px;">Quoted text goes here</blockquote>
Where 'lightblue' can be replaced with any CSS or HTML color name.
This will render your text like this:
Quoted text goes here

What's the "H" do in the Chapter Title paragraph tag description?

I want to create a paragraph tag that's similar to the Chapter Title paragraph tag in the Chapter template found in the Book template folder. With this paragraph tag selected, on the Numbering tab of the paragraph designed it says, "H:CHAPTER <$chapnum>\t" in the Autonumber Format box. What does the "H" do? Thanks!
JJ

JJ200- wrote:
I want to create a paragraph tag that's similar to the Chapter Title paragraph tag in the Chapter template found in the Book template folder. With this paragraph tag selected, on the Numbering tab of the paragraph designed it says, "H:CHAPTER <$chapnum>\t" in the Autonumber Format box. What does the "H" do? Thanks!
JJ
It's an autonumber format prefix or austonumber format series identifier; it's purpose os to insulate one numbering "stream" from others. Search Google for terms like "FrameMaker autonumber format series identifier" without quotes for more info.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Chp Play lists - how to play only one chapter at a time

CS4
The setup:
2 timelines
1 menu
1 chapter playlist
3 buttons (all, wedding, reception)
I'm not seeing how to make the DVD return to the main menu after playing chp 1 (Button 2 [wedding]), if user clicks button 2 which is linked to chapter 1 thru a playlist on timeline 1.
That is, I can set the end action of timeline 1, I can set the end action of the playlist, and I can set the end action of ch1 by way of the playlist panel.
It appears ch1 wants its end action set to start playing chp2 (button 3 [reception]) to provide thru play if the `All' (button 1) has been used.
How then can cause chapter one to be played and at the end return to main menu instead of going an to button 3 as It would if user had hit button 1.
(all).
What I end up with is a situation where if user wants to view only chapter 1 by hitting button 2 (wedding).... it still continues on to button 3 (reception) at the end.
Since I needed this project done now... I took the hardway around and ground out another piece of video containing only chapter 1.
Now I get the result I was after, but it seems very inefficient. Ch1 on in the playlist is just setting there unused and I suspect there is a smarter way to do it.
To cut down on the amont of data on the DVD, I guess I could have gone ahead and made a piece of video contaiing only ch 2 (button 3 [reception]).
But still that too, although I've saved considerable data being written to DVD, it still seems pretty inefficient. And I suspect the playlist is provided just so I don't have to do it this way.
Can anyone outline how to deal with multiple chapters so that the DVD returns to the main menu after chp1 or any other chapter that has chpters following it. (If user so desires)?

Stan Jones wrote:
The chapter playlist will be one chapter, which you appear to have set up.
Set the END ACTION of that CHAPTER PLAYLIST to last menu.
Yes I have. Are you saying that if I set the End action of ch_PlayList to last menu, that then when a user hits button 2 which is linked to chp1 on the playlist, that play will stop after chp1 (button 2) has played?
As apposed to what I have done as descripted... setting Ch_plylist end action to Main menu/default.
In that setup pressing buttob2 ends up playing right thru the whole thing rather than stopping at the end of ch1.
PS - I'm busily coping a project to a test area now, but how can test that without having to play clear thru chp1 to see what happens?
OH Wait.. are you saying NOT to include chp2 in the playlist?.... ahhh now that makes sense.
Thanks for the input.

Chapter Tool - can anyone help?

Hi I am trying to get my hands on Apple's chapter tool for creating enhanced podcast. I have been looking online but the link on Apple's website is no longer working so i was wondering if anyone has a copy of chapter tool or can point me in the right direction on where I can download it.
Thanks in advanced!
Tony

I can't advise you about the chapter tool, but you might like to have a look at Podcast Maker ($29.95) which will take an existing MP3, add chapters, images, description and summary and write the feed file, and post the feed and the media file to a server or your iDisk. I've used it for my podcast for three years and found it does exactly what's needed simply and reliably.
(Since I've recommended it a number of times I perhaps ought to add that I have no connection with this firm.)

Encore chapter markers which move with clip

Problem: Encore chapter markers which move with clip
CS4 Production Suite
XP Pro SP3
I have 9 sequences with each containing 4 Encore chapter markers. As expected in the real world, the end users continually want edits to the sequences. If I razor out a piece of a clip in the sequence, the Encore chapter markers stay fixed to the time ruler and do not move with the clip. As a result, one has to manually move each Encore chapter marker to re-align with the proper location on a clip. This is time consuming and makes no sense. Is there anyway for the Encore chapter markers to act like clip markers so they move with edits?
If not, does someone have a plugin which would look at the Encore chapter markers in a sequence and place corresponding clip markers on Video 1. After editing, the plugin could re-align the Encore chapter markers with their respective clip markers.

What is needed are Encore Chapter Clip Markers so Encore markers follow the clip. Just as you would move the current-time indicator to the frame where you want an Encore chapter point and then right click (Windows) in the time ruler and choose the type of marker, a new context menu item "Encore Chapter Clip Marker" would be available which would place an Encore chapter marker on the clip in the currently selected video track. With this, one could edit the sequence and know the Encore chapter point is still at the same frame of the clip.
I encourage others to either copy this feature description or their own version and submit it to the Feature Request Page for Premiere.
Feature Request Page
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
One should submit this Feature to both Premiere and Encore since both are effected. By the way, Encore has a Feature Request user form you may also want to submit this to. Premiere does not appear to have a Feature Request user form so I used the Feature Request Page mentioned above.

Can Apple TV display special characters in movie chapter names?

I have an Apple TV 2.0.1. I have encoded my own movies with descriptive chapter names, imported them into iTunes 7.6.2.9, and synced them to my Apple TV. Does the Apple TV have the ability to display special characters (ó, û, etc.) in movie chapter names? The movies play fine and in iTunes the chapter names are all displayed correctly. I also have an iPod Touch 1.1.4 and it can display the chapter names with special characters fine as well. When playing the movies on Apple TV, only the chapters that have special characters in them display nothing at all for the chapter name. All the other chapters display fine.

Welcome to the  Discussion Forums.
I can't really confirm your observation one way or the other, I don't use chapter names. I suspect though that your observations are correct. Unusual characters can often cause issues in a variety of ways, illegal characters in your filenames for example can cause the video not to be found at all or in some cases simply not play. If you are using ie instead of safari for example the  in my welcome my well not display properly whereas others will clearly see it as an apple symbol.

How can i modify a step type description?

I need to modify the description of some custom step types. I saw how this is made in the Basic Ivi step types. What i want to do is to display the current selected operation for an ivi step type as is done in the basic Ivi step type. Isaw that this is done just evaluating the vriable instrOperation and depending on the value you guys insert a name corresponding to that value.
I tried to do the same and modified a custom step's description in order to display the currently selected oparation. The problem is that i can't display any label...instead of the label i want to appear i get a "String not found in Table" message in the step's description. What table is this?...Do i need to make the changes i want in a table or i can just use some predefined labels?...this is because with simple words like FREQUENCY or INIT the description seems to work fine. What can i do to solve the problem?
This is the description i have in the step:
ResStr("IVI_STEP_TYPE", "IVI", "IVI") + " " + ResStr("IVI_STEP_TYPE", "Counter", "Counter") + ": " + ((Step.LogicalName=="") ? ResStr("IVI_STEP_TYPE", "UNSPECIFIED LOGICAL NAME", "UNSPECIFIED LOGICAL NAME") : LocalizeExpression(Step.LogicalName)) + ", " + ResStr("IVI_STEP_TYPE", ((Step.Operation==0) ? "CONF FREQUENCY" : ((Step.Operation==1) ? "MEASURE" : ((Step.Operation==2) ? "READ" : ((Step.Operation==3) ? "INIT" : ((Step.Operation==4) ? "STATUS" : ((Step.Operation==5) ? "ABORT" : ((Step.Operation==6) ? "FETCH" : ((Step.Operation==7) ? "PERIOD" : ((Step.Operation==8) ? "CONF. VERTICAL" : ((Step.Operation==9) ? "CONF. INPUT IMPEDANCE" : ((Step.Operation==10) ? "CONF. BANDPASS FILTER" : ((Step.Operation==11) ? "CONF. LOWPASS FILTER" : ((Step.Operation==12) ? "CONF. HIGHPASS FILTER" : ((Step.Operation==13) ? "UNCONFIGURE FILTER" : ((Step.Operation==14) ? "SECONDARY EVENT" : ((Step.Operation==15) ? "RISE TIME" : ((Step.Operation==16) ? "FALL TIME" : ((Step.Operation==17) ? "POSITIVE PULSE" : ((Step.Operation==18) ? "NEGATIVE PULSE" : ((Step.Operation==19) ? "CONF. INTERVAL X TO Y MEAS" : ((Step.Operation==20) ? "CONF. PHASE X TO Y MEAS" : ((Step.Operation==21) ? "MEASURE X TO Y" : ((Step.Operation==22) ? "CONF. EXT. START ARM" : ((Step.Operation==23) ? "CONF. IMM START ARM" : ((Step.Operation==24) ? "CONF. EXT. STOP ARM" : ((Step.Operation==25) ? "CONF.TIME STOP ARM" : ((Step.Operation==26) ? "CONF. DIGITS STOP ARM" : "INVALID OPERATION"))))))))))))))))))))))))))))
and this is the description i get in some of the steps:
Ivi Counter, "Sample Counter", String not found in table

Eromero -
The ResStr function retrieves a string from the TestStand language resource files. We call this a table. The funtion requires a category and tag value name. Review the Creating String Resource Files section in Chapter 3, page 6 of the User Manual for more details.
So the strings that you are already referencing are in the IviStepTypes.ini file in the
Components\NI\Language\English directory. You could add your new strings that you require to a sister file that you would create under the Components\User\Language\English directory, or you can remove the call to ResStr and just hardcode the string with your step type if you do not want the ability to translate the string for other languages.
The call that is probably failing is:
ResStr
("IVI_STEP_TYPE", ((Step.Operation==0) ? "CONF FREQUENCY" : ...
Also, right now the call to ResStr("IVI_STEP_TYPE", "Counter", "Counter") is probably failing and just using the default value you supply in the call.
Scott Richardson - NI
Scott Richardson
National Instruments

Does track end jump trump chapter or story end jump?

I have a DVD with 1 menu & 3 tracks. Tracks 1 & 2 each contain l short video (different audio or video formats) and track 3 contains 3 short videos which I have broken into 1 story w/3 chapters. On track 1, there is 1 chapter marker and I have set its end jump back to the menu. The end jump for the track itself is set to Track 2. Button 1 connection is set to the chapter marker. Ditto for track 2 except its end jump is set to track 3 while its one chapter marker end jump is set to menu 1. Button 2 is targeted to track 2, chapter 1. Track 3 has 3 chapters. It's end jump is set to menu 1. The chapters within the story are also set to menu 1 and it works the way I want it to. Button 6 is a PLAY ALL button targeted to track 1. When I select button 1, the video ends and continues on to track 2 instead of going back to menu 1;. When I select button 2, it also contiunues on (to track 3) instead of jumping back to menu 1. My goal was to be able to access each individual video and then jump back to the main menu. I tried adding stories to each of Track 1 & 2 and making the story end jump go back to he main menu but it seems the track end jump trumps both chapter & story end jumps. Anybody have any solutions to my problem? thanks.
Steve

Hi:
You can do it using a script. Take the DVDSP User Manual and look for the topic Jumping to a Menu's Loop Point (Chapter 14 - Creating Scripts) and you'll find a detailed description of how to do it.
DVDSP User Manual download page
Hope it helps!
(1191)
Alberto

Chapter id description

Similar Messages

Maybe you are looking for