Char based GATP check

hi,
Is variant class mandatory for characteristic based gatp check?
If not, in case of MTS scenario, when a sales order is created, how ( and where) to specify the characeteristic value based on which ATP check is to be carried out?
Regards,
RS

Dear Tibor,
Thanks for your response...
I had already gone through the SAP help document. But still my question is a bit different. I will give an example.
A material is defined with batch class. No variant class is maintained.After production, customer number is maintained in the batch characteristic.
At the time of sales order creation, product availability check should take place based on the customer (sold to party) in the sales order by searching stock (with batches) in which the same customer is maintained as a characteristic value.
In short ......Is there any user exit for batch determination during product availability check ?
Regards,
RS
Edited by: sap_apo31 on Jan 6, 2012 1:05 PM

Similar Messages

  • Rule based GATP Check

    Hello experts,
    Our team has configured rule based gatp check parameters and maintained condition technique, relevant rules with product substitution, location substitution, profile parameters and rule determination.
    We are having four condition tables i.e. most specific to most generic and condition records are maintained for all the key combinations, whereas system is picking up the record, which is most generic.
    Please let me know how the system picks up the condition record in rule based atp check.
    Thanks and Regards,
    Sai Dacha
    9849030809

    Hi Anupam,
    Please find the comments.
    Can you also check your check instruction and see if it has
    --> "Activate RBA" and "Start immediately" check box checked for the check mode you guys are using and business event A
    Comment:
    Both the check boxes are checked for the relevant combination.
    If you have this setting then I would like you to check in master data where you have created Integrated Rules:
    Comment:
    I've maintained only one rule, which is in valid periods.
    Make sure you have maintained integrated rules correctly and assigned the correct location determination procedure.
    Comment:
    Checked both Production Substitution and Location determination procedures and their assignments.
    --> Very basic point but no harm in checking, sometimes we miss very basic things: Do you have all the locations in APO and also products at those location which you want to populate in the sales order.
    Comments:
    All the combinations of products and locations are in APO.
    Thanks,
    Sai Dacha

  • SAP APO : GATP:Ruled Based ATP check :Location

    System look for best CDD plant out of 3 plants
    For example, there are 4 plants (P1, P2,and  P3, ). All can not meet the RDD (say 1st July) of the customer, however let’s say P2 can give the best CDD (5th July). System should choose P3. (May be in another inventory situation P3 can give the earliest CDD, system should then choose P3).
    CDD:Commited Delivary date
    RDD:Requestion Delivary Date
    Let me the configration seting in ruled based ATP check and how to go about??

    Hi,
    maintian the following settings in the SCM APO Master data - Rule Maintenance  -/SAPAPO/RBA04 - Integrated Rule Maintenance  Maintain the following things here
    By going to Profile and parameter
    Maintain the Rule control, maintain rule control in this maintiain top from list for Location.
    Maintain the location determintion activity here maintain Check mode and Business event.
    Come back to first screen and maintain the
    location dermination substitution here in the first line maintin the actual plant and maintain the remining plant in the follwing lines.
    maintain the rule here maintain for the location determination procedure.
    lastly you need to maintain create rule determination for the plant and rule.
    Hoping you maintained al the SPRO settings
    Regards,
    T.Muthyalappa.

  • RBA GATP check is not getting invoked for Sales Order

    Hi Everyone,
    RBA GATP check is not getting invoked for Sales order.
    I maintained the configuration settings for 'Rules-Based Availability Check', APO general settings (check mode, check instruction), carried out integrated rule maintenance, Rule determination for the combination of order type & product, associated the check mode to product master. Also maintained all the settings in ECC towards Req class, Req type, checking control etc.
    However, sales order is not invoking RBA Check though it is showing up the 'Rule' icon in the screen. Also, in the APO Availability check in Sales order when I click onto 'check instruction', I get the checking mode that pertains to RBA for business event 'A' (Sales order). Though I have not maintained any stock for the main material for which I have the sales order, yet system is confirming any quantity that I put in.
    I would expect that system would propose the same material in an alternate location where we have stock through RBA.
    Request you to share ideas on this.
    Regards,
    Avijit Dutta

    Hi Avijit,
    You should used No Checking Horizon in Checking instructions and also Check your rule control settings.
    What you have defined in 1st and 2nd steps. Check whether product substitution is carried out or Location Substitution.
    Thanks,
    Bala.

  • GATP check for Batch and Batch characteristics

    Dear Experts ,
    I have a question regarding GATP check
    scenario is like this
    1) Create a Sales order in a plant
    and there are 10 supply DC
    consider we are into batch management and the stocks are in Batches with production date and Expiry date
    when i create a sales order for qty  1000 , system must do ATP check in all the plants and pick the right batch according to the expiry date
    how to handle in GATP
    what are the basic steps for configuration and master setup
    Thanks  & Regards
    Raj

    *system must do ATP check in all the plants and pick the right batch according to the expiry date*
    ATP check and batch determination are unrelated things. Batch determination follows ATP check. but the SLED parameter may not be able to determine batches for the entire confirmed qty as there may be some bacthes that do not qualify the SLED parameter (assume only warehouse stocks being in scope of check) and this may not have been blocked before hand in say a separate stor loc that is excluded from ATP qty
    If you want to do ATP check at all locations..then remember that the check is happening at potentailly different material availability dates. It might be prudent to sort all the batches by remaining shelf life..and that might mean if the order qty is 1000.. then you might have 5 plants and 9 batches meeting the criteria based on oldest stocks first.(assuming this is what you would like to do). You then need to create five different line items in the sales order with different delivery plants and then immediately create delivery and do the picking,.
    Let me know if you discover a neater solution around this. You can also try global location determination (and a rule control strategy appropriate) in RBA and see if the proposal is as per the expected result. I have my doubts on this. Also to be considered are delivery group correlation to ship the entire qty at one. So you might have to pack 5 deliveries in one shipment..and probably one invoice?
    Regards,
    Loknath

  • Need to change the LOV field based on checked box selection in OAF page

    Dear ALL,
    I have a requirement as below:
    I have a custom OAF page having a lov  field which is mandatory, a check box and a two text fields.
    So based on LOV value selection i am defaulting two text field value automatically.
    So my requirement is when user selects the check box automatically the LOV field should be non mandatory and user can insert in values to the lov field and text field and submit it.
    SO basically based on check box field selection i need to make the lov field in such a way it should accept all the values what user enters instead of check the query added in VO behind the LOV.
    Please suggest me some pointers to achieve this requirement.
    Thanks
    Deb

    hi,
    in PFR use:
    if ("checkevent".equals(pageContext.getParameter(EVENT_PARAM))) 
                     HashMap hashMap = new HashMap();
                     String checkboxval=pageContext.getParameter("item2");
                  hashMap.put("checkboxval",checkboxval);
                    pageContext.setForwardURLToCurrentPage(hashMap ,
                    true, // retain the AM
                    OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
                    OAWebBeanConstants.IGNORE_MESSAGES);
    and in PR use:
    if((pageContext.getParameter("checkboxval'))!=null)
    OAMessageLovInputBean lovInputBean=(OAMessageLovInputBean)webBean.findIndexedChildRecursive("item3");
          lovInputBean.setRequired("false");
    try it
    Regards
    Mahesh

  • Default the GR based IV check in PO based on account assignment category

    Hi Experts,
    We have the below business requirement based on GR based IV check in the PO. We knows that this can be automatically defaulted by using the two master records.
    1.Vendor master,
    2.Purchase info record.
    But our cilents needs this field to be automated based on the account assignment category.  Because lot of vendors are created without the activiation of this check box also they do not want to go by mass upload transaction to change the master records.
    They want only based on the account assignement category. For example if a PO is created using the account assignement K then this GR based IV is selected automatically.
    Kindly adivce any configuration setting is available to fullfill this requiremennt.

    Hi,
    unfortunately the GR based IV can not be set in OME9 (in customizing).
    In ME21N, if it is normal PO, GR Based IV indicator is not set. But if 
    item category = D, GR Based IV indicator is automatically set by       
    system.                                                                
    Best regards
    Erika

  • If GR based IV checked for items without excise duty, MIRO posting hanging.

    Iam working in a client location, one of client business scenario is MIRO posting without excise (Only VAT or CST). for this case i have not maintained vendor excise details in J1ID.
    When a MIRO with reference to PO for an item ticked for "GR based IV" is posted, the system is hanging or is not posting and not issuing any message. Specifically for an item to which exicse is not applicable.
    please send your expert advice on this
    Edited by: J Sridharan on Mar 30, 2009 3:55 PM

    Thanks for your response
    this issue is further briefed below
    we are working for a indian client with CIN. most of the PO's which is created in SAP system with all Excise parameters and applicable taxes. further all PO's created with GR based IV check box enabled.
    now the issue is, in some of the purchases vendor is not applicable for excise, so there is no excise parameters in the PO, only tax is applicable. for this case we have not maintained vendor excise details in J1ID. but we have maintained material chapter id and CENVAT determination in J1ID. but as i mentioed earlier these PO's also with GR based IV check box enabled.
    If the PO is not excisable no Excise capturing and posting is required, for these types of PO's we are following the below steps
    1. Creation of PO with GR based IV check box enabled
    2. Goods Receipt without excise capturing
    3. Invoice verification - MIRO ( here system is not able to post the docuement because of GR based IV tick mark)
    i hope this will brief about my query.
    waiting for your response.

  • GATP check on a Material Variant of a configurab​le material

    Hi Experts,
      In ECC side material variant is created . with reference to a configurable material of type KMAT.
       The same configurable material is also used a pricing reference material for the material variant.
    The configurable material is not relevant for production has no MRP tabs created. It is also not relevant for ATP check.
    Material variant is of MTS strategy and relevant for ATP check.
    Configurable material is not CIF'ed to APO. ECC ATP check was working fine. While doing GATP check , it is showing following error and not doing ATP check.
    Product  for external product number XXXXXXX and
    BSG BSG1 does not exist .
    XXXXXX---> is the configurable material.
    Do I need to CIF across classes , characteristics and configurable material to APO even if I am doing ATP check on the material variant.

    Hi,
    No need to CIF across Class and Characteristics.
    CIF across the Material ( Guess this material is just one Material). Activate the ATP Model for that material.
    You need to maintain "CDP" in the customizing instead of Variant configuration in APO.
    This should work.
    Regards,

  • GR based IV check box suppressed - Extended Classic Scenario

    Hello Folks,
    How are you doing today ?
    We are working in SRM 5.0 Extended Classic scenario.
    When created the Local PO in SRM with GR Based IV Check box active, the
    follow-on back-end Purchase order is generated without this flag. In
    other terms, system is creating the follow-on ECC PO without GR Based
    IV check box active. As a result, we are unable to run the ERS cycle.
    Back-end system in above scenario is ECC 6.0. And vendor settings are
    maintained with GR based IV flag on in both ECC and SRM.
    Kindly advice.
    Thank you for your assistance !

    Hi Ravi and Yann,
    Thank you for your inputs. OSS note-956083 can not be applied in my case due to the hight system version (patch level 550).
    I have already raised this issue to SAP, but in the lack of proper infrastrucure SAP can not access the system. (BASIS guys are still struggling with it)
    Well...let me give you recap-
    We have not activated nor implemented any BAdi so far (Vanila SRM 5.0 EC scenario) PO creation for goods is working fine and as desired. But when it come across with PO with limit item or services, system throws an error as -
    "PO 5100000263: Service-based invoice verif. requires GR "NO" or G R-based invoice verif."
    Would deeply appreciate if you guys can share insight on this issue.
    Thank you for your assistance!

  • GATP Check with Batch

    Hi
    We have a requirement of GATP check from one batch. We plan to use the user exits around RBATP to achiev this. We are facing issues when we set up the COnsolidation Process. I am unable to pass on the batch information to the Stock Transfer Requisition generated. Moreover I dont think there is any link between the Sales Order and the generated STR (beyond the conversion of ATP tree structure). In case you have worked on such a scenario or have any inputs/workarounds for this process, it will be of immense help.
    Rajiv

    Hi Rajiv,
    Just a thought, I don't know how it will help you.  Try creating a characteristic in R/3 and assign it to a class.  The same has to be maintained in the classification view of the material under class type 023 and then try pass on the batch information to the stock transfer requisition.
    Regards
    R. Senthil Mareeswaran.

  • Rule based ATP check with SOA

    Hello,
    We wish to implement ATP check using Ent Services.
    Details:
    Environment : SAP ECC 6.o with Enhancement Package 3/ SCM 5.0
    Ent service used: /SAPAPO/SDM_PARCRTRC :  ProductAvailabilityRequirementCreateRequestConfirmation
    We were able to carry out Product check using the service. However we are unable to carry out rule based ATP check using the same service.
    We have carried out the entire configuration as per SAP's building block configuration guide for Global ATP & SAP Note 1127895.
    For RBA <Rule based ATP check>, we are getting the results as expected when we create Sales order from SAP R/3 (Transaction VA01), however ATP simulation in APO & Ent service does not give the results as expected. When we carry out ATP simulation in APO / Ent service, results are same as Product check & not as RBA i.e. they respect only requested Product location stock & does not propose alternate Product or Location in case of shortages
    Plz share the experience to fix the issue
    Mangesh A. Kulkarni

    Hi mangesh
    Check this links , not very sure , but may help you...
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/availability%252bchecking%252bin%252bsap
    Re: ATP confirmation in CRM
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/scm/rba
    Regards
    Abhishek

  • GR Based IV check box

    Hi. I need help in controlling the GR Based IV check box in creating the PO.
    We normally set this in the vendor master. But then, How can I set the GR BASED IV checkbox base on the PO document type that will be used?
    Let say I want all sap standard types of PO to be GR Based and some Z type PO to be not a  GR based IV PO.  Is this possible?
    Is there a User-Exit for this?

    HI,
    Since you want to set the GR based IV to set for all Standard Purchase order- at doc type level.
    So the first thing is the vendor master setting which you are already doing.
    Second you can also do it by the info record .by creating info record for all vendor and material /Material Group ..we can control the GR IV indicator
    Third  thing is Controlling it by the screen layout.
    SPRO-Material Mangement-Purchasing- Purchase order-Define doc types
    here in the definition of Doc type ,attach a screen layout.
    SPRO-Material Mangement-Purchasing- Purchase order- Define screen Layout at doc type level.
    in this Screen layout in the tab --GRIR control. make the GR based invoice as mandatory,so that it cant be skipped while created or change of PO and user will check it even if it is missed out.
    hope so it helps
    Regards
    Anjanna

  • Default settings for gr based ir check box for asset PO

    dear experts,
                  in vendor master record in purchasing data tab i have checked gr based iv check box, and hence whenever i am creating a Po with X vendor for material system is automatically  checking the check box in po for gr based iv but with the same vendor X if i am creating a PO for Asset itis not checking the gr based iv check box by default.
           can you pls tell me where the default setting for gr based  iv lies for the asset procurement.
    thanks
    ujwal

    HI Ujjwala,
    The setting in spro in Acct assigment,  u are talking about is GR Receipt or Invoice Receipts.
    These are not GR Based Invoice Verification.
    GR based Invoice Verification comes from either ur inforecords or vender master.
    if u check or uncheck these in spro in acct assigment, then it will comes ur Deliver Tab not ur invoice Verification Tab.
    one thing more, if u make it mutiple Acct assigment, then it will be Non Valuated G/R Based IV.
    Hope Clear U !
    REgards,
    Pardeep Malik

  • Rule based availability check

    Hi,
    Please provide step by step guide instructions for rule based availability check configuration. Your help is highly appreciated.
    Thanks
    Chandana

    Hi Chandana,
    I have provided the below link which contains the full details of step by
    step configuration of rule based availability check
    http://help.sap.com/saphelp_scm70/helpdata/EN/fb/e6783739e6ff5de10000009b38f8cf/frameset.htm
    Please confirm your query is resolved
    Regards
    R. Senthil Mareeswaran.

Maybe you are looking for