Char type NUMC not storing 0 value

Hi All,
I am uploading data from a KF (in DSO) to a char of type NUMC in cube. I have some KF values 0 in DSO which are stored in cube char as # and not 0. I want the value to be stored as 0 in cube.
Could anyone please let me know how to achieve this?
Regards,
Niraj

Hi Niraj,
          Not sure, but you can try this.
         Create a routine for target Characteristics. Code as belw.
         DATA: Loc_Var Type NUMC.
        MOVE SOURCE_FIELDS-KF INTO LOC_VAR.
        RESULT = LOC_VAR.
Regards,
Harpal
Edited by: Harpalsinh Gohil on Nov 20, 2009 9:47 AM

Similar Messages

Visual Studio 2012 SharePoint Project Error : The partial project item type does not have a value for this property

Hi,
I am getting this error from visual studio 2012 whenever i try to create the following project types:
- Workflow Custom activity
- Web parts
The error is as mentioned below
"The partial project item type does not have a value for this property"
Due to this the when I add above type of items in my project, they show a red cross icon against them.
Please let me know If have you any solution?

Hi
I had same issue. Below is the solution
Installing
"Visual Studio 2012 Update 3" usually solves this problem. (You can download it through microsoft's official site at
"http://www.microsoft.com/en-in/download/details.aspx?id=39305")
Hansraj Rathva

Statistical condition type is not showing same value

Dear All,
I have one issue related with pricing condition that i want to use one statistical condition type ZEM1 suppose 100 INR which is entered manually at the contract level for suppose 10 qty but when i am creating the First sales order for 5 qty with reference to contract ,the ZEM1 condition is copied 100 INR and in second sales order for remaining 5 qty it is distributed with quantity and showing value 50 INR.But my requirement is such that i want the condition value of ZEM1 should appeare as 100 INR from contract to billing level for every sales cycle.Is it any way to make the condition type such that it will have the same value suppose 100 INR from contract to billing doc for every sales orders.
I maintained the copying control pricing type as "D" for S.Doc to S.Doc.
please suggest.
thanks in advance
ravi k

Hello
Check the condition type configuration. in the calculation type give the indicator as B- Fixed amount
the copy control seems to be correct.
you can try above and revert
hope this helps
Thanks
akasha

Gr/ir slip field value is not stored in table mkpf..!!

dear sap gurus,
    i have a typical problem.. i am doing Transfer posting from one storage location to another. using MB1B with 311 mov type.. and mentioning some values in the gr/ir slip field.. but system is not storing the value in table..
Can any one say how to solve this.. if i use MIGO_TR then its storinghte value i mentioned in MKPF table..
Regard,
Manu

Hi Manu,
This GR/GI slip number has only been designed for use in those countries (for example, Italy) whose legislation requires specification of this number for goods that leave the plant and are transported on public roads. In other countries, the material document number printed on the GR/GI slip (in the standard system) is usually sufficient. To enter external documents, you can use the field Material slip or Delivery note.
If still wants to use this field you are required make relevent settings in config.
Please go to transaction OMC1.
There you will find 4 push buttons.
   1. Activation of GR/IR slip for plant.
   2. Number range grouping code.
   3. Intervals for number range.
   4. Object(here you are assigning the number range for the plant, storage location and movement type.
This will allow you to store GR/IR slip number in MKPF with trx. MB1B
Regards
Mauro

Sybase ODBC driver for Linux - handle of numeric data type is not correctly

Linux RHEL 4 + Oracle 10.2.0.3 - all work fine. But numeric data type does not coorectly show values. I gor driver from ASE 15. Who has already resolve this issue???

To begin with:
- what is the table definition in Sybase?
- what is the table definition in Oracle: SQL> describe <table>@<sybase_hsodbc_link>;
and probably you need to start a gateway debug trace (HS_FDS_TRACE_LEVEL-DEBUG) and an ODBC trace to see what happens.
You could paste the appropriate section(s) here. Also paste the init<hsodbc>.ora and odbc.ini .
Ed

Transfer a char type varialble value to NUMC type variable

Hi all,
I have a BSEG-PROJK type NUMC(8) variable and one xyz type CHAR(50) variable.
I have to pass value from xyz to BSEG-PROJK
my e.g is that while I am passing
xyz= 'M-000064'
BSEG-PROJK = xyz
then the value of BSEG-PROJK is 00000064 but i need M-000064

Hi,
The value M-000064 is showing in field PROJK of BSEG, due to the conversion routine ABPSP attached in the domain level of this field.
- To check the actual value stored in data base level
- SE16 Give table name=>to see the table contents Press F7=>settings=>user parameters=> uncheck the check box check conversion exit.
- now the value in field PROJK will show in numeric.
Regards
DKS

Problem - Values are not stored into Tables when value are accepted from us

// jsp code
<%@ page import="java.util.Enumeration" %>
<%@ page import="java.util.Vector" %>
<%@ page import="java.util.*" %>
<%@ page import="java.lang.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="beans.register2" %>
<jsp:useBean id="registerbn" scope= "session" class="beans.register2" />
<% String base = (String) session.getAttribute("base");
registerbn.setDburl((String)session.getAttribute("dbUrl"));
registerbn.setDbuser((String)session.getAttribute("dbUserName"));
registerbn.setDbpasswd((String)session.getAttribute("dbPassword"));
System.out.println("Inside jsp - setMembers of promotion successful");
// registerbn.setMembers1();
System.out.println("after setting");
%>
<%
String action=request.getParameter("action");
%>
<HTML>
<HEAD>
<TITLE> TIFR INTRANET </TITLE>
</HEAD>
<HEAD>
<script language="JavaScript1.2">
//some validations functions
</script>
</head>
<body>
<table valign="top" align="top">
<TR>
<TD COLSPAN="100%"><jsp:include page="Header.jsp" flush="true"/></TD>
</TR>
<TR>
<TD align="top" valign="top"><jsp:include page="menu.jsp" flush="true"/>
<font face="arial" size="1">
site developed by ADPCell TIFR
</font>
</td>
<td>
<table cellpadding="2" cellspacing="3" width="40%">
<form method="post" action="./beans.register2">
<td width="40" align="center"
<font face="arial" size="5" align="right">
<b>
Registration <hr> </hr>
</b>
</font>
<br>
</td>
<tr valign="center" width="80%">
<td width="40%">
<b><font face="Arial" size="2">IdCode </b> </font>
</td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="idcode" size="6" style="border-style:solid" value="">
</font></b>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">User </font></B></td>
<td width="40%">
<input type="text" name="user" size="12" style="border-style: solid" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Password </font></B></td>
<td width="40%">
<input type="password" name="password" size="25" tabindex="20" style="border-style: solid" width="12" value="">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Section code </font></b></td>
<td width="40%">
<select size="1" name="section_code" tabindex="9"
style="border-style: solid">
<%@ include file="section.txt" %>

1)
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Category </font> </b></td>
<td width="80%">
<font face="arial" size="2"> <b>
<input type="radio" name="Category" value="General">General
<input type="radio" name="Category" Value="Operators">Operators
<input type="radio" name="Category" Value="Heads">Heads<BR>
</b> </font>
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Category </font> <b> </td>
<td width="40%">
<font face="Arial" size="2"> <b>
<input type="radio" name="BCategory" value="General">BGeneral
<input type="radio" name="BCategory" Value="Operators">Operators
<input type="radio" name="BCategory" Value="Head">Head
</td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Budget Heads
</font></b></td>
<td width="40%">
<b><font face="Arial" size="4">
<textarea rows="2" name="Bheads" cols="20" size="100"
style="border-style: solid">
</textarea></font></b></td></tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Other Category</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="OtherCategory" tabindex="20" style="border-style:
solid" size="2"><OPTION value="EH">EH
<OPTION value="EO">EO
<OPTION value="FH">FH
<OPTION value="FO">FO
<OPTION value="AO">AO
<OPTION value="AH">AH
</select></font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">email </font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<input type="text" name="email" size="20" style="border-style:
solid" width="6">
</font></b></td>
</tr>
<tr width="80%">
<td width="40%">
<font face="Arial" size="2"><b>Dob </font></b></td>
<td width="40%">
<font face="Arial" size="2"><b>
<select size="1" name="day" style="border-style: solid"><OPTION value="0">Day
<% int i;
for(i=1;i<=31;i++)
out.print("<OPTION VALUE=\""+i+"\">"+i+"</option>");
%>
</select>
<select size="1" name="month" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10">October
<OPTION value="11">November
<OPTION value="12">December
</select>
<select size="1" name="year" style="border-style: solid">
<% int j;
for(j=1950;j<=2000;j++)
out.print("<option value=\""+j+"\">"+j+"</option>");
%>
</select></b></font></td>
</tr>
<br> <br>
<tr width="80%">
<td width="40%">
<b><font face="Arial" size="2">Date of Join
</font></b></td>
<td width="40%">
<b><font face="Arial" size="2">
<select size="1" name="day1" style="border-style: solid"><OPTION value="0">Day
<% int k;
for(k=1;k<=31;k++)
out.print("<OPTION VALUE=\""+k+"\">"+k+"</option>");
%>
</select>
<select size="1" name="month1" style="border-style: solid" ><OPTION value="0">Month
<OPTION value="1" >January
<OPTION value="2" >February
<OPTION value="3" >March
<OPTION value="4" >April
<OPTION value="5" >May
<OPTION value="6" >June
<OPTION value="7" >July
<OPTION value="8" >August
<OPTION value="9" >September
<OPTION value="10" >October
<OPTION value="11" >November
<OPTION value="12" >December
</select>
<select size="1" name="year1" style="border-style: solid">
<% int l;
for(l=1950;l<=2000;l++)
out.print("<OPTION VALUE=\""+l+"\">"+l+"</option>");
%>
</select>
</b></font></td>
</tr>
</table>
<table cellpadding="2" cellspacing="3" width="40%" >
<tr width="100%">
<td width="30%">
<input type="Submit" value="Submit" name="B1" > </td>
<td width="40%">
<input type="reset" value="Reset" name="B2"></td>
<%
//String action=request.getParameter("Submit1");
if(action!=null && action.equals("Submit"))
try{
String idcode=request.getParameter("idcode");
String user=request.getParameter("user");
String password=request.getParameter("password");
String seccode=request.getParameter("section_code");
String Category=request.getParameter("Category");
String BCategory=request.getParameter("BCategory");
String Bheads=request.getParameter("Bheads");
String OtherCategory=request.getParameter("OtherCategory");
String email=request.getParameter("email");
String day=request.getParameter("day");
String month=request.getParameter("month");
String year=request.getParameter("year");
String Dob=day+"/"+month+"/"+year;
String day1=request.getParameter("day1");
String month1=request.getParameter("month1");
String year1=request.getParameter("year1");
String Doj=day1+"/"+month1+"/"+year1;
registerbn.setIdcode("idcode");
registerbn.setUser("user");
registerbn.setPasswd("password");
registerbn.setSec_code("seccode");
registerbn.setCategory("Category");
registerbn.setBut_cat("BCategory");
registerbn.setBut_heads("Bheads");
registerbn.setOther_Category("OtherCategory");
registerbn.setEmail("email");
registerbn.setDob("Dob");
registerbn.setDoj("Doj");
registerbn.saveData();
}catch(Exception ex)
out.println("ERROR :has occured ");
%>
</table>
</table>
</table>
</form>
</td>
</tr>
<jsp include page="Footer.jsp" flush="true"/>
------------------ End of JSP Programs ----------------
// Beans Code
package beans;
import java.util.*;
import java.util.Date;
import java.util.Vector;
import java.sql.*;
public class register
private String idcode;
private String user;
private String passwd;
private String sec_code;
private Vector sec_names;
private String category;
private String bud_cat;
private String bud_heads;
private String other_category;
private String email;
private String dob;
private String doj;
private String ent_dt;
private String act_dt;
private String dbUrl=null;
private String dbUser=null;
private String dbPassword=null;
public void setDburl(String u)
dbUrl=u;
public void setDbuser(String us)
dbUser=us;
public void setDbpasswd(String Pass)
dbPassword=Pass;
public String getIdcode()
return idcode;
public void setIdcode(String i)
idcode=i;
public String getUser()
return user;
public void setUser(String u)
user=u;
public String getPasswd()
return passwd;
public void setPasswd(String p)
passwd=p;
public Vector getSec_names()
return sec_names;
public void setSec_names()
// This function should select valid section code from the database and then populate the sec_names vector.
public String getSec_code()
return sec_code;
public void setSec_code(String s)
sec_code=s;
public String getCategory()
return category;
public void setCategory(String c)
category=c;
public String getBud_cat()
return bud_cat;
public void setBud_cat(String b)
bud_cat=b;
public String getBud_heads()
return bud_heads;
public void setBud_heads(String b)
bud_heads=b;
public String getOther_Category()
return other_category;
public void setOther_category(String o)
other_category=o;
public String getEmail()
return email;
public void setEmail(String s)
email=s;
public String getDob()
return dob;
public void setDob(String d)
dob=d;
public String getDoj()
return doj;
public void setDoj(String d)
doj=d;
public String getAct_dt()
return act_dt;
public void setAct_dt(String d)
act_dt=d;
public void setMembers()
Connection conn;
Statement stmt;
String query="Select sec_code from web.section";
sec_details=new Vector();
try
conn=DriverManager.getConnection(dbUrl, dbUser, dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
System.out.println("Statement Created");
ResultSet rs=stmt.executeQuery(query);
do
String seccode=rs.getString(1);
sec_details.addElement(seccode);
}while(rs.next());
rs.close();
stmt.close();
conn.close();
}catch(SQLException e)
System.out.println("Execution Occured" +e);
catch(Exception e)
System.out.println("Execution Occured" +e);
public void saveData()
Connection conn;
Statement stmt;
String id=getIdcode();
String use=getUser();
String pass=getPasswd();
String mail=getEmail();
String sec=getSec_code();
String cat=getCategory();
String oth=getOther_Category();
String bud=getBud_cat();
String dob1=getDob();
String doj1=getDoj();
String budh=getBud_heads();
String query="insert into wb_register " + "(idcode, user, passwd, sec_code, category, bud_cat, bud_heads, other_category, email , dob, doj, ent_dt)" + " values('"+id+"','"+use+"','"+pass+"','"+sec+"','"+cat+"','"+bud+"','" budh"','" oth"','"+mail+"','"+dob1+"','"+doj1+"','"+"Sysdate"+"')";
try
conn=DriverManager.getConnection(dbUrl,dbUser,dbPassword);
System.out.println("connected");
stmt=conn.createStatement();
stmt.executeUpdate(query);
stmt.close();
conn.close();
catch(SQLException e)
System.out.println("Exception occured" +e);
catch(Exception er)
System.out.println("Exception occured" +er);
------------------------End of Beans Program ---------------
Questions:-
1) when we are submitting values to form it is not stored into backend (Oracle 9i)
2) please send some source code for how to fetch values from backend and wants stored into Combo box /select Box
3) We have faced problem of How call methods of Bean program into JSP programs

The code to get the values from the database and store them in the combo box or select box would be as follows:
<%
zSQL = "select id, name from Users"
rs = Con.ExecuteQuery(zSQL);
if(!rs.next()) {
%>
<select name="id">
<option value="0">select the name</option>
<%
do {
%>
<option value="<%= rs.getString(1) %>"><%= rs.getString(2) %></option>
<%
while (rs.next());
%>
</select>
<%
else {
out.println("No Record Found");
%>
This would help you better.
and for your first question, please check whether u are able to connect database with your connection method. if you are able to connect to the database, then please check the values (print them on the browser) which are posted from form, if it is also correct then check you r insert statement.
and for your last question the best tutorial is JAVA API.
Cheers!
Rambee

Measuring Point during IK01 not allowing characteristics with CHAR type

Hi Experts,
Measuring Point during IK01 not allowing characteristics with CHAR type Only allows NUM,
could you anyone suggest on this.
Regards
Nitin

May i know the reason of such implementation?
You can use group code and valuation code for assigning predefined values to measuring documents.
Moreover text field can be used for assigning short text to it.

Info Object: Change of Data Type (NUMC to CHAR)

We have a scenario wherein one of the Info objects is defined currently as NUMC. Due to the change in the Source system, the info object is now defined with data type as CHAR. The info object in consideration is the "Cost element".
As the current info object contains data, it will not be possible to change the data type from NUM to CHAR.
Is there any pre-defined way of doing this data type change without loss of data (in the info object as well as the info cube(s) where the info object is used)?
Regards
Bala

Hi Balakrishana,
Try this:
Insted of changing the definition of infoobject(NUMC to CHAR), why cant you change the data itself from CHAR to NUMC...?? If length is same.
You can write a simple routine in transfer rules and you can convert.
Hope it Helps
Srini

Transaction Type field not getting value in F-05 transaction

Hi All,
When ever we are doing a reverse posting for foreign currency valuation using F.05 Tcode it will create a BDC session where we can execute this batch Input session thru SM37.
This will use F-05 Tcode to post the the entries, but the problem is one of the field Transaction Type is not getting value for some of the GL account numbers range. This is totally SAP standard program take cares of it. Transaction type field value shuld be populated by '990' value for this GL account range, this is fixed. So is thr any User exit or Screen exit for this Tcode or how we can populate the value....
Help me...
Chandar
Edited by: Bala Chandar on Feb 12, 2009 1:25 PM
Edited by: Bala Chandar on Feb 12, 2009 1:28 PM
Edited by: Bala Chandar on Feb 12, 2009 1:33 PM

Hi Mr/Mrs Bala Chander,
I am having the same problem.
When running F.05 a BIM is created for GL account X. GL account X has a field status in which transaction type is defined as a required field because of BCS / ECCS. We have a substitution rule in place which should default the transaction type, based on several criteria. But when executing the BIM, I see that nothing is filled in field transaction type. Did you find a proper solution for your problem? Changing the field status is not an option in my opinion.
Regards,
Joep

Value Misc. Allowance for the flexfield segment Expense Type does not exist

Dear All,
can any budy help me out in Internet Expense modulee
Error:- Value Misc. Allowance for the flexfield segment Expense Type does not exist in the value set OIE_EXPENSE_TYPES.
Problem details:- we have define one expense templates " Relocation Expnse" under this we have define number of expense items ,in which Misc. Allowance is one
Prevously it was end dated but now end date is removed , now when we are trying to claim expense against this item we are getting the above error.
can you please tell me why this is happining and what is the solution.
Regard
Ajay Sharma

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Value Type 66 not showing up on Report FMAVCR01

Hi Experts,
I experience one problem on report FMAVCR01 [display annual values of control objects] that my consumed Amount is not zero because value type 66 - transfer posting is not included in the output.
My client did a actual finance posting between different commitment items, funds. Is there a reason for not including this value type?
Thanks for your answers
HP

Hello HP,
Besides of question above, you might also have a look at this customizing and read the on-line documentation in the IMG:
Funds Management Government->Budget Control System (BCS)->Availability Control->Settings for Availability Control Ledger->Define Filter Settings for Commitment/Actual Values
Check whether you have excluded any value type at this point, as it will not be considered for AVC..
Good luck
regards,Mar

Discount Condition types is not showing values

Hi All,
We have defined 5 discount Condition Types which will work based on percentage all these are header level, but in the transaction when i am entering 2% or 3% it is taking discount percentage but its not showing discount values.
Please help me to resolve this issue.......
Thanks in Advance.

Hi,
Refer to note 731831- Transaction DB02 always shows 0 as the number of tables.
Regards,
Maheswaran

Why is there a data type NUMC?

Hi ABAP masters,
working in database support for several years I've very often seen the problems that arise from the awkward data type NUMC.
A numeric type stored as characters.
What I always wondered is: what is this data type really good for?
The leading zero output display alone is hardly a valid reason to waste storage and complicate the usage of the data of that type.
I cannot imagine any use for this data type that wouldn't be better done by using integer types.
So, if you know what the reasoning behind this data type is, please let me know.
thanks and best regards,
Lars

NUMC data type can be used to maintain positive numbers with leading Zeros
Most of SAP's important numbers like Sales Order numbers, Customer numbers, Delivery documents,
Material numbers, Sales Org, Division, Company Codes, Distribution Channel are CHARs only
But if their Data is containing only digits, SAP Transactions will automatically add Leading zeros for them and store in the database as Raw data.
If those SAP numbers contains at least one non-digit character, then leading zeros will not be added.
Example: if 54 is assigned to BUKRS it will be stored in DB as 0054
               if 5A is assigned to BUKRS it will be stored in DB as 5A only
Leading zero concept is very useful for Date and Time calculations.
Month, Day, hours etc., must be declared as NUMC for better calculations
Example:
    PARAMETERS p_year TYPE I.          "instead of Integer we can use type N LENGTH 4 also here
    DATA v_month TYPE N LENGTH 2.
    DATA v_day     TYPE N LENGTH 2.
    DATA v_year    TYPE N LENGTH 4.       then calculations will be easy
    DATA FDATE   TYPE D.
    v_year = p_year.
    v_day = 1.              "1st day of Month
    DO 12 TIMES.
        v_month = sy-index.           "Leading zero will be added automatically
        CONCATENATE v_year v_month v_day INTO FDATE.
        WRITE / FDATE.                "Every month 1st day of selected year
    ENDDO.
Example: Customer number contains uneven digits. It should be converted to a 10 digit number
                 with "C" as 1st Character. Logic will be
                 PARAMETERS custno TYPE I.
                 DATA v1                     TYPE N LENGTH 10.
                 DATA str_custno         TYPE C LENGTH 11.
                 v1 = custno.       "customer number will be converted to 10 digit number
                 CONCATENATE 'C' V1   INTO str_custno.
please correct me, if I am wrong
Thanks and Regards
Nagababu Tubati

In FTP server file not storing in proper order when 'FTP_R3_TO_SERVER'

Dear ,
when i used FTP_R3_TO_SERVER to download data in FTP server
i checked in FTP server file is not storing in proper order in FTP server . plz help how to get the file in proper order .it urgent . full points must be given. i given code below .
DATA : BEGIN OF iresult OCCURS 5,
rec(450),
END OF iresult ,
DATA :
dest LIKE rfcdes-rfcdest VALUE 'SAPFTP',
compress TYPE c VALUE 'N',
host(64) TYPE c.
DATA: hdl TYPE i.
DATA: BEGIN OF result OCCURS 0,
line(100) TYPE c,
END OF result.
DATA : key TYPE i VALUE 26101957 ,
dstlen TYPE i,
blob_length TYPE i.
host = p_host .
DESCRIBE FIELD p_password LENGTH dstlen IN CHARACTER MODE.
CALL 'AB_RFC_X_SCRAMBLE_STRING'
ID 'SOURCE' FIELD p_password ID 'KEY' FIELD key
ID 'SCR' FIELD 'X' ID 'DESTINATION' FIELD p_password
ID 'DSTLEN' FIELD dstlen.
CALL FUNCTION 'FTP_CONNECT'
EXPORTING
user = p_user
password = p_password
host = host
rfc_destination = dest
IMPORTING
handle = hdl
EXCEPTIONS
not_connected = 1
OTHERS = 2.
IF sy-subrc = 0.
CONCATENATE 'cd' ftppath INTO ftppath SEPARATED BY space .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = ftppath
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
CLEAR result .
REFRESH result .
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = 'ascii'
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
IF sy-subrc = 0 .
DESCRIBE TABLE iresult LINES lines.
blob_length = lines * width .
clear : lines.
Delete the existing file
CONCATENATE 'del' ftpfile INTO delfile SEPARATED BY SPACE.
CALL FUNCTION 'FTP_COMMAND'
EXPORTING
handle = hdl
command = delfile
TABLES
data = result
EXCEPTIONS
command_error = 1
tcpip_error = 2.
*End of deleting the existing file
CALL FUNCTION 'FTP_R3_TO_SERVER'
EXPORTING
handle = hdl
fname = ftpfile
blob_length = blob_length
TABLES
blob = iresult
EXCEPTIONS
TCPIP_ERROR = 1
COMMAND_ERROR = 2
DATA_ERROR = 3
OTHERS = 4.
IF sy-subrc 0 .
WRITE 'Error in writing file to ftp' .
ELSE.
WRITE 'File downloaded on the ftp server successfully'.
ENDIF.
ENDIF.
ELSE.
WRITE : 'Path on ftp not found : ' , ftppath .
ENDIF.
CALL FUNCTION 'FTP_DISCONNECT'
EXPORTING
handle = hdl.
CALL FUNCTION 'RFC_CONNECTION_CLOSE'
EXPORTING
destination = 'SAPFTP'
EXCEPTIONS
OTHERS = 1.
ELSE.
WRITE 'Could not connect to ftp' .
ENDIF.
ENDFORM. " FTPFINANCEACCESS_DOWNLOAD
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'PASSWORD'.
screen-invisible = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Edited by: manoj kv on Feb 27, 2008 12:55 PM
Edited by: manoj kv on Feb 28, 2008 5:37 AM
Edited by: manoj kv on Feb 28, 2008 5:39 AM
Edited by: manoj kv on Mar 5, 2008 2:15 PM
Edited by: manoj kv on Mar 7, 2008 12:51 PM

Hello,
Did you try to put 'X' to the parameter CHARACTER_MODE.
Hope it will help you
Olivier

Char type NUMC not storing 0 value

Similar Messages

Maybe you are looking for