Character engoding during RFC module call

Hi all!
I have FunctionalModule which calls remote FM and pass string to it. In remote FM I can't see proper symbols but seems encoding problem. I pass char10 variable. Importing variable in remote FM is char10 as well.
Any thoughts?
Seems problem is with casting char and integer. I moved integer to char-like variable before passing it to remote FM
Edited by: Andrey Selivanov on Aug 19, 2010 9:59 AM

yes. it is ok.
I have already said - it is the problem with concatenating integer and char and passing as a char. integer seems coming in HEX format...

Similar Messages

RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!

Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck.

System error during RFC call BAPI_FIXACCOUNT_GETLIST

Hi Gurus,
Below are the error and steps when i perform Payroll Posting to Accounting. To enable communication between distributed systems, the appropriate method have been specified in ALE Customizing for the objects of the following tables. (Basis -> Application Link Enabling (ALE) -> Modelling and Implementing Business Processes -> Maintain Distribution Model and Distribute Views.)
However, error still exists as shown below:-
1.     Run TCode PC00_M99_CIPE
2.     Encountered Error as shown below:
Communication error with system QAS, function FI_ACCT_DET_HR
Message no. 3G404
Diagnosis
The function module "FI_ACCT_DET_HR" has been called remotely in system "QAS". As a result, an error occurred when creating the connection or during communication.
Procedure
Check that the ALE distribution model is correctly maintained.
Account determination could not be performed
Message no. 3G361
Diagnosis
The account could not be determined for one of the following reasons:
No destination could be found in the ALE distribution model for the AcctngEmplyeeExpnses.Check method.
A system or communication error occurred when executing the function FI_ACCT_DET_HR in the target system.
System error during RFC call BAPI_FIXACCOUNT_GETLIST: / CPIC-CALL: 'ThSAPCMINIT' Unknown serv ice
Message no. KI012
3.      Check in SM21: NiConnect Unsuccessful, Return Code: -0003
                    Communication error, CPIC return code 020, SAP return code 665
Please advice. Thanks in advance.
Best Regards,
Fung

Hi,
Probably because of timeout, it is unable to execute the request ..so it is aborted.
btw, is it a synchronous call ? what is the message size ? the given data to RFC is correct and valid structure ? check the mapping .for this use the data from SXMB_MONI and test it
Check this blog for timeout errors-
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Regards,
moorthy

ABAP Dump due to RFC Function module call in another thread

Hi,
I am facing some problem since yesterday. In one of my executable program I am calling a RFC fm as below mentioned
REPORT ZREPORT.
CALL FUNCTION 'Z_XXXXXXXXX'
 STARTING NEW TASK L_NAME
 DESTINATION IN GROUP 'TASK'
 PERFORMING RETURN_INFO ON END OF TASK
 EXPORTING
 P_exp1 = l_emp
 TABLES
 R_VBELN = r_it_vbeln
 EXCEPTIONS
 NO_DATA_TO_PROCESS = 1
 OTHERS = 2.
wait until v_task = 1.
update ztable.
Due to some data inconsistence one of the SAP function
module which I am calling in my function module Z_XXXXXXXXX
is generating dump with message type X. Since there is data inconsistence it is generating dump that's OK.
But the problem i am getting is, report ZREPORT is generating dump at WAIT statement saying illegal statement even though I am calling that function module
Z_XXXXXXXXX as a separate new task.
Can somebody help me.
Thanks,
Amara.

hi, Amara
I agree with Rich said, and do a simulate test in my server, here is the analysis.
Assume we have a RFC, like this:
FUNCTION ZGZL_DUMPTEST.
*"*"Local interface:
*" EXPORTING
*" VALUE(OUT) TYPE I
*" EXCEPTIONS
*" CONVERT_FAIL
data:a type i.
a = 'A'.
ENDFUNCTION.
And call this RFC like you way:
REPORT ZGZL_DUMPTEST .
DATA:
SEMAPHORE(1) VALUE SPACE,
LC_OUT TYPE I.
CALL FUNCTION 'ZGZL_DUMPTEST'
STARTING NEW TASK 'DUMP'
PERFORMING RETURN_INFO ON END OF TASK.
WAIT UNTIL SEMAPHORE = 'X'.
WRITE: 'OVER'.
FORM RETURN_INFO USING TASKNAME.
RECEIVE RESULTS FROM FUNCTION 'ZGZL_DUMPTEST'
 IMPORTING OUT = LC_OUT.
SEMAPHORE = 'X'.
ENDFORM. " RETURN_INFO
if we run the RFC in se37 directly, obviously it will occur a rumtime error CONVT_NO_NUMBER, and dump.
But if we run the above application to call the RFC, we will get a different runtime error CALL_FUNCTION_REMOTE_ERROR.
Error Analysis in ST22 like this:
An error occurred when executing a REMOTE FUNCTION CALL.
It was logged under the name "CONVT_NO_NUMBER"
on the called page.
I think that means the application receive the runtime error from RFC when call RECEIVE RESULTS.
In normal CALL FUNCTION, the external application will accept the rumetime error throw from FM, that's correct, because it let the caller can handle these runtime errors.
In you case, you said RFC run in a new task, yes, that's true, so you can call the RFC like this:
CALL FUNCTION 'ZGZL_DUMPTEST'
STARTING NEW TASK 'DUMP'
PERFORMING RETURN_INFO ON END OF TASK.
WAIT UNTIL SEMAPHORE = 'X'.
WRITE: 'OVER'.
FORM RETURN_INFO USING TASKNAME.
SEMAPHORE = 'X'.
ENDFORM. " RETURN_INFO
It will goes well, no dump. Why? because we don't use RECEIVE RESULT. RECEIVE RESULT will bring the result from FM, also bring the runtime error from FM.
So if you want to call the FM and receive the result, handle the runtime error in FM inside at first.
like this:
CATCH SYSTEM-EXCEPTIONS CONVT_NO_NUMBER = 1.
 a = 'A'.
ENDCATCH.
IF SY-SUBRC = 1.
 RAISE CONVERT_FAIL.
ENDIF.
And then you call FM like this:
CALL FUNCTION 'ZGZL_DUMPTEST'
STARTING NEW TASK 'DUMP'
PERFORMING RETURN_INFO ON END OF TASK.
WAIT UNTIL SEMAPHORE = 'X'.
WRITE: 'OVER'.
FORM RETURN_INFO USING TASKNAME.
RECEIVE RESULTS FROM FUNCTION 'ZGZL_DUMPTEST'
 IMPORTING OUT = LC_OUT
 EXCEPTIONS CONVERT_FAIL = 1.
SEMAPHORE = 'X'.
ENDFORM. " RETURN_INFO
That's will be ok for your scenario.
Hope my reply is useful.
thanks

RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#

Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.

hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno

Rfc function module call error

Hi Abaper,
I'm doing upgrade from 4.7 to ecc 6.0 currently and encounter problem in one of the rfc function module that we used. I've tested the connection to destination using sm59 and the connection is successful.
As an information, in the rfc setting, the target system is not Unicode system.
When I test using se37 and put the rfc destination in my function module call, I always encountered system_error exception. There's no issue with this rfc call before in 4.7 system.
Please help me on this. Thank you.
Edited by: Abraham Bukit on Sep 3, 2008 2:36 AM

Hi,
I had the same issue in the past and solved it in the following way.
If the destination system is not Unicode please try to set the password for the communication user set in SM59 using only upper-case characters and taking into account that the password shouldn't be longer than 8 characters.
Hope this will help.

STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

Hello All
i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
System EC2 Command TMS_PM_DISTRIBUTE_PROFILE
Client 000 Service tp Profile Service
User TMSADM Start Online
Date 20.10.2009 Function TMS_PS_WRITE_PROFILE_TO_DISK
Time 17:36:23 Message SET_CODEPAGE_FAILED
description : Could not start transport control program tp
detail error is as below if i press on more information
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
everythign is fine except below entries
under RFC destination
EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
under TP call
RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
Can anybody please help me on the same.
Mani

Hello All,
thanks a lot for you reply, i want to clear some point here
- I have no other physical attached to the system, i created other system as virtual system.
- to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
- to Anil .. i did as u said but nothing changed after that.
here is the log from trans log file
4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.10.2009 - 17:37:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans.exe -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 20 17:37:37 2009 12584 0.012584
4 ETW000 [dev trc ,00000] db_con_init called 65 0.012649
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 401 0.013050
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 160 0.013210
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
i have dbms/type = mss in profile parameters
I am still getting the same error.
Mani

MDX Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (NW 7.0)

Hello everyone,
while trying to execute an MDX Statement on NW 7s SAP BI i ran into the "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'" error.
I searched these forums for a solution an found SAP Note 1032461.
The Problem is: it only applys to older versions of the NetWeaver. NW 7 seems to have a new RFC library.
Is there another solution for this problem in NW 7?

I found the solution.
The note was right, but i used the wrong .dll.

STMS error - Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'

Dear Experts,
We are facing issue in releasing or importing TRs.
1.When releasing TRs in DEV server, it is showing error message "Could not start control program TP" on status bar. But repeating the same process went successful.
2. While Importing TRs into QAS, at the time of refreshing queue/adjusting import queue, it pops-up error " timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' .But after repeating same process, TRs were impoted successfully.
We had performed the following in DEV & QAs:
1. Upgraded kernel to patch level 137.
2. After that replaced TP & R3trans with latest patch levels 169.
3. Re-configured STMS
4. Restarted Server.
Also checked,
(i). Report RSTPTEST in se38- sometimes successful; sometimes error :"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (ii). RFC "CALLTP_WindowsNT" in sm59 Connection is OK.
Please help.
Thank you in advance.
Regards

Hi,
Check below link if it helps:
Re: STMS
Pls also check below things :
- check that the "Gateway Options" are maintained in SM59 and the sapdp00/sapgw00 are maintained in the etc/services files. SAP Note 52959
- Please check SAP Note 773830 if you are on a cluster environment.
For the error regarding timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' please check SAP Notes 581509, 566566.
Thanks,
Rupali

Timeout during allocate / CPIC-CALL: ThSAPCMRCV

We have the error: "timeout during allocate / CPIC-CALL: ThSAPCMRCV" when test our RFC "MDX PARSER". Windows 2003 x64 Server, SAP NetWeaver 7.0 Unicode. We read notes about this error (for example 1032461) but we have another problem. Our problem concerned librfc32.dll registration (we doing this using command: regsvr32 C:\Windows\system32\librfc32.dll) because of this we can't starts mdxsvr. Anybody doing same operation on Windows 2003 x64 server?

Hi
I think you should post this in basis and security forum.
Cheers
Chanda

Function module call with destination

Hi,
how can check if a function module call with destination works or not ?
How can I debug.
What can be the reason if it is not calles
regards
ertas

* to chcek the rfc Destination By pass RFC destination name and Connection Type..
RFC_CHECK_DESTINATION
or
RFC_CHECK_DESTINATION_ID
or
You can use this FM RFC_VERIFY_DESTINATION if your release is greater than 4.6C.
Check this sample code from Craig Cmehil's weblog.
CALL FUNCTION 'RFC_VERIFY_DESTINATION'
EXPORTING
    DESTINATION = TMP
        TIMEOUT = 10
EXCEPTIONS
    INTERNAL_FAILURE           = 1
    TIMEOUT                    = 2
    DEST_COMMUNICATION_FAILURE = 3
    DEST_SYSTEM_FAILURE        = 4
    UPDATE_FAILURE             = 5
    NO_UPDATE_AUTHORITY        = 6
    OTHERS                     = 7.
IF SY-SUBRC EQ '0'.
    "* Do code here
ENDIF.
Prabhu

Problem using RFC to call an adobe form to create pdf file........

Hi,
 I have an RFC that calls an adobe form to display the pdf output back in a bsp page...the RFC fails at the call to the adobe form (next call after after getting the form name) ...while debugging it looks like within this call it is trying to call fpcomp_job_open and failing on the call check_job_open ...
The code in my RFC looks like this....
DATA:
 gs_outputparams TYPE sfpoutputparams,
 fn_name TYPE rs38l_fnam,
 fp_docparams TYPE sfpdocparams,
 fp_formoutput TYPE fpformoutput,
 frm_result TYPE sfpjoboutput,
 lv_form TYPE fpname.
DATA: l_pdf_xstring TYPE xstring,
 l_pdf_len TYPE i.
lv_form = 'ZHR_ASSESSMENT_FORM'.
Start formrocessing - OPEN spool job to send to printer
gs_outputparams-getpdf = 'X'.
call function 'FP_JOB_OPEN'
 changing
 ie_outputparams = gs_outputparams
 exceptions
 others = 1.
IF sy-subrc <> 0.
*// RAISE FP Open Error.
 exit.
ENDIF.
Get name of the generated function module for the form
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
 EXPORTING
 i_name = lv_form
 IMPORTING
 e_funcname = fn_name.
IF sy-subrc <> 0.
*// RAISE FP Get Form Module Name Error.
 exit.
ENDIF.
Call the Adobe Form
CALL FUNCTION fn_name
EXPORTING
 /1bcdwb/docparams = fp_docparams
 gv_appraisal_id = gv_appraisal_id
IMPORTING
 /1bcdwb/formoutput = fp_formoutput
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 others = 4.
IF sy-subrc <> 0.
*// RAISE Call Form Module Error.
 perform f_build_message using 'E'
 'ZEXT'
 012
 changing return.
 exit.
ENDIF.
End from processing - Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
 IMPORTING
 e_result = frm_result
 EXCEPTIONS
 usage_error = 1
 system_error = 2
 internal_error = 3
 OTHERS = 4.
IF sy-subrc <> 0.
*// RAISE FP Close Error.
 exit.
ENDIF.
form = fp_formoutput-pdf.
Thanks,
Venkatesh

what is the solution for this problem? I have the same problem. I get sy-subrc = 1 after CALL FUNCTION 'FPCOMP_JOB_OPEN'.
If I look more in detail I see that "Perform check_job_open" is creating the problem:
FORM check_job_open.
IF fpstat-is_opened = c_true. (--> exactly here is the problem. This condition is true so the program is terminated.)
 PERFORM reset_status.
 MESSAGE ID 'FPRUNX' TYPE 'E' NUMBER '101' RAISING usage_error.
ENDIF.
fpstat-is_opened = c_true.
fpstat-is_started = c_false.
ENDFORM.
Does somebody know why my job is open and what is the solution to have the job closed at the beginning of my processing?
Thanks in advance.

Problem with function module calling

Hi,
I have two questions here
i have a function moduel 'Z_GET_MATL_BALANCE'
in my code it called in the below said way
CALL FUNCTION 'Z_GET_MATL_BALANCE'
    DESTINATION 'NONE'
    STARTING NEW TASK 'A'
    PERFORMING f_back ON END OF TASK
    EXPORTING
      ref_dte    = s_datum-low
      str_dte    = s_datum-high
      end_dte    = s_datum-high
      i_werks    = p_werks
      i_past     = 'X'
      i_future   = 'X'
      verselem   = p_mrpver
      plscn      = p_scenar
      r_outrec   = r_outrec
      supstk     = p_supstk
      days_ahead = w_days_ahead
      shipnt     = p_shipnt
    TABLES
      mat_bals   = w_zmat_bals_a
      i_zdatum   = i_datum
      mat_movmts = w_mat_movmts_a
      mat_ship   = i_mat_ship_a.
IF sy-subrc NE 0.
    MESSAGE e005(ZMIM) WITH
   text-009 text-166 text-054 sy-subrc.
ENDIF.
FORM f_back USING task.
CASE task.
    WHEN 'A' .
      RECEIVE RESULTS FROM FUNCTION 'Z_GET_MATL_BALANCE'
     TABLES
          mat_bals                     = w_zmat_bals_a
          mat_movmts                   = w_mat_movmts_a
          mat_ship                     = i_mat_ship_a
       EXCEPTIONS
            call_material_lesen_fail     = 1
            call_t450n_fail              = 2
            call_t399d_fail              = 3
            call_aufbauen_mdpsx_fail     = 4
            call_mdezx_aufbauen_fail     = 5
            call_t001w_fail              = 6
            call_zmrpelem_failed         = 7
            call_aufbauen_mdpsx_sim_fail = 8
            OTHERS                       = 9.
      IF SY-SUBRC NE 0.
       RET_CODE1 = SY-SUBRC.
      ENDIF.
now my first question is what is the difference between function modules calling normally and in the above said way
and the second question is
under tables parameter i have four internal tables defined where as while calling the same function module using recive results i have three internal tables. is this correct?
i am asking this because i am getting an error message while using this funciton module
please do not give generic answers, all the helpful answers will get a def reward

Call function starting new task is used to make Asynchronus RFC Call. In this case your function module will be called in a NEW SESSION and it will exceute independently from the Main program which is calling the FM. Also, the main program will continue its own processing and it will not wait for the RFC FM to complete.
Its not mandatory to have all the TABLES parameters in the RETURN Perform (..Receive results from ...)

How to identify order of RFC'S calling in a bussiness package component

Hi,
My problem is to find out order of rfc's calling for bussiness package(ESS) component.......................i can't proceed to do modifications without knowing about order of rfc'c calling...............
Regards,
Rajesh

Hi Rajesh,
To identify the order of RFC's calling in your application, you have look into CcAppl Component in ess/lea DC.
loadConfiguration() method in CcAppl performs the following actions
 Initializes member variables (especially the VACs and the perspectives)
 Defines the navigation graph
 Creates a list of all perspectives
In case of ess/lea, first perspective is perspCreateEdit.
Perspective perspCreateEdit = new Perspective(PERSP_CREATE_EDIT_NAME, Perspective.LAYOUT_ROW, new VAC[] { vacEdit, vacTeamView });
VAC vacEdit = new VAC(DC_NAME, VAC_FORMEDIT_PACKAGE);
public final static String VAC_FORMEDIT_PACKAGE =
 PACKAGE_PREFIX + "form.edit.VcFormEdit";
It means the first view is from VcFormEdit component, ie EditView.
In Edit view, Pt_Arq_Request_Prepare, Pt_Arq_Application_Create, Pt_Arq_Search_Next_Processor Function modules are calling to fill types of leave, Approver name,.....
This is the way to identify the order of calling function modules in application.
Regards
Vasundhara

How to handle JCO Exceptions at JCO (RFC) function call

Hello Forum,
I am implementing an JCO Server scenario.
I use dynamic repositories like Example7.java from the JCO documentation.
Example7 throws an JCO.AbapException if anything went wrong, e.g. the function is not implemented.
How to react on this AbapException?
The examples in SAP Help documentation only catch
SYSTEM_FAILURE and COMMUNICATION_FAILURE.
All other RFC modules I have seen which declare the function modules to be used by dynamic JCO repositories (like Example7.java) do not define any other Exception parameters.
But these two are only thrown and caught when something with communication went completely wrong, e.g. RFC not found.
But when RFC can be reached and the JCO Server is executing the Java method, an AbapException could be thrown on error. How to react on this?
In my implementation based on the examples I always get a ABAP dump. The dump says:
Exception named without message text. Why that name?
How to handle this type of exception in order to avoid the dump?
Can anyone post an example please?
Thanks,
Carsten
Edited by: Carsten Schön on Apr 15, 2008 4:22 PM
Edited by: Carsten Schön on Apr 15, 2008 4:24 PM

Hi Micky,
thanks for your quick response.
If so, to throw JCO.AbapException on JCO Server side is not correct?
What I do is throwing the JCO.AbapException (like in the JCO Example 7).
At the RFC call in APAB I handle both exceptions SYSTEM_FAILURE and COMMUNICATION_FAILURE like
CALL FUNCTION 'MY_JCO_FUNCTION_MODULE'
 DESTINATION JCO_DEST
 <...>
 EXCEPTIONS
 SYSTEM_FAILURE = 1 MESSAGE RFC_MESS
 COMMUNICATION_FAILURE = 2 MESSAGE RFC_MESS.
This works as far something with RFC is wrong, e.g. Server can not find the function or Server not reachable.
But the AbapException thrown by the JCO Server (Java) is not handled that way. Why?
Sorry if this is the wrong forum but I tried posting in Netweaver integration and got no answer for 1 week and because it's ABAP related I thought the topic suites here.
Carsten
Edited by: Carsten Schön on Apr 15, 2008 5:10 PM

Character engoding during RFC module call

Similar Messages

Maybe you are looking for