Character problem in toad import table data from excel

Hi everybody,
I want to import data from an excel file to an Oracle table, so I'm using Toad's "Import Table Data" tool for this purpose.
The problem is Oracle doesn't import non-english characters properly.
My database is XE and character set is 'AL32UTF8'.
I searched web, but didn't find the solution.
Please help...

Hi again,
Thank you for your reply Srini, but it is not about Toad.
Character encoding of Excel causes the problem.
I exported an unicode encoded csv file from excel and tried to load data from that file. It worked.
Thanks.

Similar Messages

EXPORT/IMPORT TABLE DATA FROM ONE SCHEMA TO ANOTHER ONE (S.O.S)

Hi,
I urgently need your help:(, I have two different instances, in each of them there are two schemas, A and B; which tables are the same, but I need to transfer JUST the table data from A's tables to B's tables, how can I do so??
Thanks in advance,
Isabel

The total number of tables is 989:(And how many do you want ? If 988, and if you're on a 10g db, you can use exclude parameter from expdp/impdp?
Nicolas.

JDBC Lookup - Import table data from a different schema in same DB

Hi XI Experts,
We are facing an issue while importing a Database table into the external definition in PI 7.1.
The details are as below:
I have configured user 'A' in PI communication channel to access the database. But the table that I want to access is present in schema "B". Due to this, I am unable to view the table that I have to import in the list available.
In other words, I am trying to access a table present in a different schema in the same database. Please note that my user has been given all the required permissions to access different schema. Even then, I am unable to access the table in different schema.
Kindly provide your valuable suggestions as to how I can import table which is present in another schema but in the same Database.
Regards,
Subbu

If you are using PI 7.1, then you can do JDBC Lookup to import JDBC meta data (table structures from DB). Configure a jdbc receiver communication channel where you specify username and password which has permission to access schema A and Schema B of database. Specify database name in the connection string. Then you might have access to import both schema.
Please refer these links
SAP PI 7.1 Mapping Enhancements Series: Graphical Support for JDBC and RFC Lookups
How to use JDBC Lookup in PI 7.1 ?

How do I import the data from Excel (.xls) file into Oracle Database table

I have an excel file with 5 columns of 5000 rows.
I have to import 5000 rows of data into my oracle table with
same column names & Data types.
What is the best advise for this ?
Thanks.
Srini

You can connect to Oracle from Excel directly. I know you can read data but am not sure if you can export data.
Other option is to import the data into Access.
Create an ODBC connection for Oracle
Use the to connect to Oracle from Access
Export data to Oracle from Access
Shakti
http://www.impact-sol.com
Developers of Guggi Oracle - Tool for DBAs and Developers

Problem in uploading HR master Data from excel

Hello
When I am uploading HR master data using excel , I get the error
"Error in info type 0006 and emp no 00000016 with msg id 00 no. 055 msg Fill in all required entry fields "
I have filled in the following fields for infotype 0006:-
SUBTY ='1'
ANSSA = '1'
STRAS , LOCAT ,ORT01, STATE , PSTLZ , LAND1, TELNR.'
But I am getting the error for filling the required entry fields.
I am using The function module HR_MAINTAIN_MASTERDATA.
If anyone has an idea...about the problem, please write

No work schedule rule for key 1 0501NORM 20090101 ###
This type of error is a functional one . It simply means you are trying to feed the field with value which is not acceptable (here work schedule does not exist for specific key). Either contatct your functional collegue to check the configuration or change the provided data.
Also as Bala noticed you should always check if relevant record is allowed to be entered directly in PA30. Make sure all required fields are provided too.The best is to either enter it manually or use SHDB to record this entry and get technical field names. You then know which fields you need to provide in order to create a correct entry.
Regards
Marcin

Importing table data from one schema to another schema

Hi All,
I exported tablerows only of Schema A, and same I am trying to imported in Schema B.
While importing I am getting oracle error "row rejected, Integrity constraint violated
parent key not found".
What I did is I disabled all the constraints through script in Schema B, and imported data. Data imported successfully, but while executing the enabling the constraints script in Schema B constraints are not enabled due to parent and chile relationship problems, even I executed this script many times.
Note:- Schema A and Schema B are same structure, Schema A contains data but
Schema B does not
Can any body have any idea on this?
Thanks,

Hi,
But I want data to be completely imported without losing.
I am trying to disable the constraints using the following queries for enabling and
disabling
select 'ALTER TABLE '||A.TABLE_NAME||' DISABLE CONSTRAINT '||B.CONSTRAINT_NAME||';'
FROM user_constraints A, USER_CONSTRAINTS B
WHERE A.TABLE_NAME = B.TABLE_NAME
AND A.CONSTRAINT_TYPE = 'P'
Foreign constraints -
select 'ALTER TABLE '||A.TABLE_NAME||' DISABLE CONSTRAINT '||B.CONSTRAINT_NAME||';'
FROM user_constraints A, USER_CONSTRAINTS B
WHERE A.TABLE_NAME = B.TABLE_NAME
AND A.CONSTRAINT_TYPE = 'R'
-- Check constraints ---
select 'ALTER TABLE '||A.TABLE_NAME||' DISABLE CONSTRAINT '||B.CONSTRAINT_NAME||';'
FROM user_constraints A, USER_CONSTRAINTS B
WHERE A.TABLE_NAME = B.TABLE_NAME
AND A.CONSTRAINT_TYPE = 'C'

I'm trying to import raw data from excel file to diadem, how can i do that, and also i want to know if i can put header for it or not?

i'm using diadem version 8.1, and my operating system is windows Me.
i'm also want to know if the diadem hae an "undo button" or not??
Thansk.

Hi,
To import EXCEL files you can open the device DATA and then go to the menu FILE->OPEN. In the following dialog you must set the FILE TYPE to Excel. If you open an Excel file with that settings the Excel-file-import-wizard will be launched. With the wizard you configure the parameters which should be imported (that includes header parameter too). Please refer to the NI-Web page to get the latest service pack "SP1d" for the Excel import filter (http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C104B?opendocument&node=132070_US)
Yes, in DIAdem 8.1 we support undo for displacements in the device GRAPH. For DIAdem 9 we expand this functionality.
I hope this information will help you.
Greetings
Walter Rick

Problem while Exporting Table Data to Excel Sheet

Hi All,
Im getting problem while downloading the table data to Excel.
Steps i was fallowed:
1)created Context node with four attributs.
2)created one attribut(resource) type: com.sap.ide.webdynpro.uielementdefinitions.Resource
3)Taken one Filedownload UI and Property resource bounded to (resource)
4)Added required jar file in the library and copied the same jar file in the navigator lib file
written the necessary coding but showing the below problem in the Browser
You must Flush before accessing the resource content
Please give me any suggestion on this
Regards
Polaka

Hi
Check this might help with Brian Fernandes comments.
Flush?
Regards
Arun Jaiswal

How to import data from excel or csv files to Oracle table

hello everybody,
I am new here and new in Oracle. I would like to know the steps how to import data from excel or csv files to Oracle table.
Let say I already have table inside the Oracle. Then my user give me the sets of data inside the Excel Worksheet.
So, how can I import the excel data into Oracle table.
Thank you in advance.
cheers,
shima

Even easier. Download JDeveloper 11G from this site.
Set up the database connection, right click on the table, select Import->Excel and specify your file to load it. On the import pop-up, you must view and update each tab indicating Columns, Data Types, and DML.
Columns -- move the selected columns that you want to load to the box on the right
Data Types -- select column name from second column to which the data for each column of the import file should load
DML -- click this tab to generate the INSERT SQL
Once done click 'Insert'

Import data from Excel to MS-SQL 2008?

I'm taking data from excel, exporting it to a csv file.
Importing it forst to Access so I can see if it fails and then using the SQL Server Import Export Wizard to pull it in.
It keeps failing and there's very little information on the internet that points me to a solution.
If I just let it create it's own tables, it does fine but I need it to import the data in specific character types.
So, I think my problem goes back to Access and it's way of setting character types.
Anyone else have this problem? Solutions?
Thanks

If anyone is wondering.
It tuned out to be the data in the Excel file, being old and abused, it had a lot of "junk" in the rows.
I ended up just copying all the columns and rows and pasted "Special" (with values) back in new rows and that seem to have gottem me past the major errors. I hate how Excel is so loose with the rules. You ad that to the fact that a lot of people that don't know how to use Excel and you end up with a mixure that's not good.
It seems that everyone here at this company uses Excel and because there aren't any rules and because Excel is so easy to start using, it gets messy.
In most cases here, people should be using Access but I doubt that's going to happen.
Man, I miss the NNTP server.

Reg transfer of data from excel to internal table

hi
i need to upload datas from Excel sheet to Internal Table.For this i use d FM
ALSM_EXCEL_TO_INTERNAL_TABLE.but the problem is if a particular field has no value in excel sheet,then its not uploaded into internal table.then next field value has come to that blank place in d internal table. what i need is if the excel sheet has a blank value for a field then a blank value is added in d inetrnal table also.

Use below program logic
Program    : ZLWMI151_UPLOAD(Data load to ZBATCH_CROSS_REF Table)
Type       : Upload program
Author     : Seshu Maramreddy
Date       : 05/16/2005
Transport : DV3K919574
Transaction: None
Description: This program will get the data from XLS File
             and it upload to ZBATCH_CROSS_REF Table
REPORT ZLWMI151_UPLOAD no standard page heading
                       line-size 100 line-count 60.
*tables : zbatch_cross_ref.
data : begin of t_text occurs 0,
       werks(4) type c,
       cmatnr(15) type c,
       srlno(12) type n,
       matnr(7) type n,
       charg(10) type n,
       end of t_text.
data: begin of t_zbatch occurs 0,
      werks like zbatch_cross_ref-werks,
      cmatnr like zbatch_cross_ref-cmatnr,
      srlno like zbatch_cross_ref-srlno,
      matnr like zbatch_cross_ref-matnr,
      charg like zbatch_cross_ref-charg,
      end of t_zbatch.
data : g_repid like sy-repid,
       g_line like sy-index,
       g_line1 like sy-index,
       $v_start_col         type i value '1',
       $v_start_row         type i value '2',
       $v_end_col           type i value '256',
       $v_end_row           type i value '65536',
       gd_currentrow type i.
data: itab like alsmex_tabline occurs 0 with header line.
data : t_final like zbatch_cross_ref occurs 0 with header line.
selection-screen : begin of block blk with frame title text.
parameters : p_file like rlgrap-filename obligatory.
selection-screen : end of block blk.
initialization.
g_repid = sy-repid.
at selection-screen on value-request for p_file.
CALL FUNCTION 'F4_FILENAME'
       EXPORTING
            PROGRAM_NAME = g_repid
       IMPORTING
            FILE_NAME    = p_file.
start-of-selection.
Uploading the data into Internal Table
perform upload_data.
perform modify_table.
top-of-page.
CALL FUNCTION 'Z_HEADER'
EXPORTING
    FLEX_TEXT1       =
    FLEX_TEXT2       =
    FLEX_TEXT3       =
*&      Form upload_data
      text
FORM upload_data.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            FILENAME                = p_file
            I_BEGIN_COL             = $v_start_col
            I_BEGIN_ROW             = $v_start_row
            I_END_COL               = $v_end_col
            I_END_ROW               = $v_end_row
       TABLES
            INTERN                  = itab
       EXCEPTIONS
            INCONSISTENT_PARAMETERS = 1
            UPLOAD_OLE              = 2
            OTHERS                  = 3.
IF SY-SUBRC <> 0.
    write:/10 'File '.
ENDIF.
if sy-subrc eq 0.
    read table itab index 1.
    gd_currentrow = itab-row.
    loop at itab.
      if itab-row ne gd_currentrow.
        append t_text.
        clear t_text.
        gd_currentrow = itab-row.
      endif.
      case itab-col.
        when '0001'.
          t_text-werks = itab-value.
        when '0002'.
          t_text-cmatnr = itab-value.
        when '0003'.
          t_text-srlno = itab-value.
        when '0004'.
          t_text-matnr = itab-value.
        when '0005'.
          t_text-charg = itab-value.
      endcase.
    endloop.
endif.
append t_text.
ENDFORM.                    " upload_data
*&      Form modify_table
      Modify the table ZBATCH_CROSS_REF
FORM modify_table.
loop at t_text.
    t_final-werks = t_text-werks.
    t_final-cmatnr = t_text-cmatnr.
    t_final-srlno = t_text-srlno.
    t_final-matnr = t_text-matnr.
    t_final-charg = t_text-charg.
    t_final-erdat = sy-datum.
    t_final-erzet = sy-uzeit.
    t_final-ernam = sy-uname.
    t_final-rstat = 'U'.
    append t_final.
    clear t_final.
endloop.
delete t_final where werks = ''.
describe table t_final lines g_line.
sort t_final by werks cmatnr srlno.
Deleting the Duplicate Records
perform select_data.
describe table t_final lines g_line1.
modify zbatch_cross_ref from table t_final.
if sy-subrc ne 0.
    write:/ 'Updation failed'.
else.
    Skip 1.
    Write:/12 'Updation has been Completed Sucessfully'.
    skip 1.
    Write:/12 'Records in file ',42 g_line .
    write:/12 'Updated records in Table',42 g_line1.
endif.
delete from zbatch_cross_ref where werks = ''.
ENDFORM.                    " modify_table
*&      Form select_data
      Deleting the duplicate records
FORM select_data.
select werks
         cmatnr
         srlno from zbatch_cross_ref
         into table t_zbatch for all entries in t_final
         where werks = t_final-werks
         and cmatnr = t_final-cmatnr
         and srlno = t_final-srlno.
sort t_zbatch by werks cmatnr srlno.
loop at t_zbatch.
    read table t_final with key werks = t_zbatch-werks
                                cmatnr = t_zbatch-cmatnr
                                srlno = t_zbatch-srlno.
    if sy-subrc eq 0.
      delete table t_final .
    endif.
    clear: t_zbatch,
           t_final.
endloop.
ENDFORM.                    " select_data
Reward points if it is helpful
Thanks
Seshu

Giving dynamic sheet name while importing data from Excel in OPENROWSET query

I want to import data from Excel to table in SQL server. Sheets in Excel file can have any name. I want to get data from first sheet of the excel file.
CREATE PROC CopyExcelDataToTempTable
@ExcelPath VARCHAR(1000)
AS
BEGIN
EXEC sp_configure 'show advanced options', 1;
RECONFIGURE;
EXEC sp_configure 'ad hoc distributed queries', 1;
RECONFIGURE;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0', N'AllowInProcess', 1;
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.12.0', N'DynamicParameters', 1;
INSERT INTO TempData
SELECT *
FROM OPENROWSET('Microsoft.ACE.OLEDB.12.0',
SELECT CONCAT('Excel 12.0 Xml;HDR=YES;Database=', @ExcelPath),
'SELECT * FROM [Sheet1$]');
END;
Currently I am giving Sheet1 as static name in Select statement. But my sheet name is not fixed. I want to create a dynamic query. If getting Sheet name is not possible then can we put sheet with its index in Select query? There is no front end. Whatever I
want to do is in SQL server 2012. Is there any solution for this problem?

Hi Ajinkya,
To get the sheet names from an excel, you can use the Stored Procedure
SP_TABLES_EX. See the below code.
EXEC sp_addlinkedserver 'ExcelSource', '',
'Microsoft.ACE.OLEDB.12.0',
'c:\worksheet.xls',
NULL,
'Excel 8.0'
EXEC sp_addlinkedsrvlogin 'ExcelSource', 'false'
GO
EXECUTE SP_TABLES_EX 'ExcelSource'
the names in the worksheet.xls and execute result are like below.
Table name
a
b
c
d
Regarding your description, you need the first sheet of your excel. As the result shows, the sheet names are sorted, so there’s no guarantee to get the first one. The SP can work as a workaround when there’s only one sheet in your excel or the required sheet’s
name is customized to be sorted at the top first.
If you have any question, feel free to let me know.
Best regards,
Eric Zhang

Import table data in right order to avoid violating foreign key constraints

Gentlemen
I am trying to import table data into an existing 10g schema using datapump import in table mode.
However, in order to avoid violating foreign key constraints, the tables must be loaded in a specified order. I tried specifying the order in the TABLES parameter:
TABLES=table1,table2,table3 etc.
However, datapump seems to chose its own order leading to errors like the following:
ORA-31693: Table data object "SCHEMAX"."TABLE3" failed to load/unload and is being skipped due to error:
ORA-02291: integrity constraint (SCHEMAX.TABLE3_TABLE1#FK) violated - parent key not found
I want to try to avoid having to disable all foreign keys because there are hundreds of them.
Any advice?
Yours
Claus Jacobsen, Denmark

Thanks Anantha.
Since I am only loadding data (the constraints are already defined in the target database), I am not sure whether this approach would work. Meanwhile I have solved the problem of moving data from one system to another using another, tedious and far from elegant approach that I would prefer to not eloborate on:-)
However, I have also discovered another probable reason why the foreign key constraints were violated, other than wrong order of table data loading. It turns out almost every single table in the schema contains a trigger supposed to generate a unique row ID from a sequence on insert such as:
CREATE OR REPLACE TRIGGER "SCHEMAX"."TABLEX#B_I_R"
BEFORE INSERT
ON TABLEX
FOR EACH ROW
DECLARE
BEGIN
SELECT tablex_seq.nextval INTO :NEW.ID FROM dual;
END;
If the import mechanism fires this trigger, and the sequences in the source and the target systems are not synchronized, then I guess that referred records a more than likely to end up with wrong ID's compared to the row ID's in the referring rows?
Spooky. Anybody can confirm this theory?
Yours
Claus
Message was edited by:
user586249

Upload data from Excel to Internal table in ECC

Hello SDN,
Here I am facing a problem for uploading the data from excel sheet to internal table in ECC6.0
Main problem is we don't have any FM ALSM_EXCEL_TO_INTERNAL_TABLE.
Please provide me the solution how to upload the data from excel to internal table through class. If possible please provide me the sample code so that it will be very helpful for me.
Waitingfor your valuable response.
Thanks & Regards,
Kumar.

Hi,
you can use OLE to acces (not only) excel, but this will only work in dialog processing.
regards,
Hans

Data from Excel to ADF table

Hi,
I need to export data from excel to ADF table and edit the data and finally send it back to database.
Would you kindly let me know how to proceed in this?
Many thanks in advance
Regards

This depends on your excel file structure.
You can use ADF Desktop Integration or
something like this(for simple excel files):
for excel -> adf table
http://technology.amis.nl/2010/09/16/adf-11g-import-from-excel-into-an-adf-table/
For adf table -> excel:
http://www.baigzeeshan.com/2010/04/exporting-table-to-excel-in-oracle-adf.html
http://adfreusablecode.blogspot.com/2012/07/export-to-excel-with-styles.html
Dario

Character problem in toad import table data from excel

Similar Messages

Maybe you are looking for