Character value can display automatically

Dear Experts,
i have a question for character value.
In BW, we have master data for PH1-PH6.
And if you know the PH6, there is unique value for PH1-PH5.
For example, if PH6 = 111111, PH1 = 1, PH2 = 11, PH3 = 111,etc.
This value is unique.
Now we have a excel layout for user to key in.
User only key in PH6, we want that the value for Ph1-Ph5 can fill-in automatically.
Just like user key in ph6 = 111111, ph1 = 1, ph2 = 11, ect.
I think characteritic relationship can achieve this requirment.
But question is that we must use the exit type for this requriment, am I right.
Can we use attribute or reference data or hierarchy ,etc to achieve this target?
If we use exit, we must create a function to support this requirement.
Thanks and best regards
Alex yang

Hi Alex,
you can do that easily with standard relationship, you need to have in the master data of PH6 the others PH as attrubutes, this way you can use char relationship based on master data. A similar way is to have a DSO with PH6 as a key and all the others PH and you can use C R with DSO. again hier is the same, if you have the hier you can easily set C R based on hier.
if you don't want to create such relations then you need exit relat.
hope this helps
Mike

Similar Messages

Problem with display of a character (value 65533)

Hi all, sorry for my english but i don't speak it very well.
I have a big problem with the visualization of a character.
I have a binary text that i have to analyze with java. With my utility all works fine, but when i get the character (binary 81) and i analayze this character i obtain an int 65533 or a byte -3 , and after a casting to char i see that java doesn't display correctly this char, infact i obtain a char like this a question mark in a square. Even if a try to write this into a text file, i can see correctly all the other char, but instead of this char i see a question mark.
Someone know why i obtain this?i have to set some specific character encoding or something like this?
I don't know if this is usefull, but these are Hebrew char.
Thanks,bye.

A character value of 65533 in not in the Unicode range for Hebrew and Java characters are Unicode encoded as UTF16. See http://www.unicode.org/charts/ .
65533 is not a byte value since bytes have a range -128 to +127 .
0x81 is not the same as 65533 decimal.
How are you converting the bytes of the file to characters?
Edited by: sabre150 on Oct 9, 2008 8:51 AM

Maximum number of character we can print in a column uing ALV grid display

Hi frnds,
My requirment is to print 500 charcter data in a column using ALV grid display.
Could any body tell me is it possible and the maximum character it can i print in a column using ALV grid dispaly.
Regards,
Sandipan

Hi Sandipan,
refer notes 857823, 910300 and 959775. All these say there is a limitation of 128 characters.
857823 - ALV grid: Strings with a maximum of 128 characters
Symptom
Entries in cells of the type CHAR or string are truncated after 128
characters in the SAP GUI.
also refer,
ALV Grid Control (cl_gui_alv_grid), function module (Full-screen) Grid
(Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
Cause and Prerequisites
The data table that is sent to the front end only allows character values
with the length 128.
Solution
This is the standard system behavior and cannot be changed.

Value can not be assigned automatically to Characteristics in Pro. Order

Hi All,
I am working on PP-PI scenario. I am getting one error during creation of Control recipe in Process order.
Error is
Value can not be assigned automatically to char XX in Process Instruction IN_AA phase BB
I have checked the settings of Characteristics XX in T code O27C but it is OK.
Thanks,
Shailendra
Edited by: Shailendra Hadkar on Feb 14, 2008 4:14 PM

Dear,
Can you tell me what is the chaerecteristics you are using?
This message comes when it is a variable and is assigned during CR creation.

Can you hide a dimension value but display one of it's attributes?

Can you hide a dimension value but display one of it's attributes in a query output?

Hi Prakash,
I assume you are referring to a characteristic ('dimension').
This is possible: If the attribute is a navigational attribute you can include it in the query definition without the 'parent' char.
If the attribute is a Display attr then you can try by setting the Display property of the parent char to No Display (right click the char in the query > Properties)
Hope this helps...

Where we can find the detail infomation about the Value String of automatic

Where we can find the detail infomation about the Value String of automatic?
such as WE06,WE01 and so on.

Hai,
           Value string keys are for SAP internal usage. It is just a pointer to the transaction event key which is necessary for automatic account determination.
           Movement types are linked to transaction keys via valuation string in OMWN T-code.
           The R/3 System automatically determines the value string assigned to a specific transaction. It depends partly on entered parameters manually and partly on parameters derived internally by the system. The value string contains all posting transactions that are possible for a certain transaction. The program decides which of these posting transactions lead to G/L account postings in individual cases. You cannot define this in Customizing.
Value string WE01, for the goods receipt for a purchase order into stock, contains transactions BSX and WRX.
WE01: BSX, WRX, PRD, KDM, EIN, EKG, BSV, FRL, FRN, BSX, UMB.
WA14: BSX ,PRD, BSX, UMB
WA01: BSX, GBB, PRD, BSX, UMB
Value string RE05 contains transactions BSX and UMB.
In the standard system, value string WE01 is assigned to goods receipts (and also cancellations and return deliveries) for Standard and Subcontracting purchase order items without account assignment concerning valuated material into stock. In the case of (valuated) goods receipts for purchase order items not subject to account assignment,
post the items to a stock account using the transaction key BSX and make an offsetting entry to a GR/IR clearing account. A price difference posting (transaction key PRD) is only used if the valuated material is subject to standard price control and if the order price (or invoice price) is different from the standard price. Transaction key KDM is required in Inventory Management for purchase orders in foreign currencies because of differences in exchange rates between goods receipts and invoice receipts, unless the material can not be debited or credited because it is subject to standard price control.
The transaction keys EIN and EKG (and possibly FRE see account determination for delivery costs) are only used in company codes where purchase account management is active (as required in France and Belgium for example).
The transaction keys BSV, FRL, and FRN are only used for the Subcontracting item category.
Value string WA14 is defined for deliveries without charge (movement type 511).
The following scenarios are possible:
Delivery without charge for material subject to moving average price control → No accounting document
Delivery without charge for material subject to standard price control (and if the posting date is in the previous period standard price in the posting period = standard price in the current period) → Inventory posting (receipt at standard price) and offsetting entry to price differences account
Delivery without charge for material subject to standard price control, with posting date in the previous period and the standard price in the posting period is different to the standard price in the current period → Inventory posting (receipt at standard price) and offsetting entry to price differences account (posting in the previous period) → Stock correction posting and Revenue/expense from revaluation (posting in the current period)
In the standard system, value string WA01 is assigned to goods issues and other goods receipts. The R/3 System uses an additional influencing factor, account grouping, to differentiate further between the various movements during account determination.
Hope it will be Helpful 4 u.
Reward Point if Useful.

I want application name can display more than 13 character. Could you tell me how to fix this problem?

I want application name can display more than 13 character.
Could you tell me how to fix this problem?

Backup and restore your software via iTunes. If the problem continues, restore as a NEW device. If this solves it, that means there is some corruption in your backup file. If the problem is still there, you should take it to the Genius Bar at an Apple Store for evaluation.

Can we automate a notification e mail before everyday with alert if there is no values on Dashboards?.

Dear All,
We are broadcasting revenue dashboards on every Monday.
1. Can we automate a notification e mail before Monday with alert if there is no revenue on Dashboards.
2. Also need to automate stop sending broadcasting e mail on Monday if there is no revenue on Dashboards.

Unfortunately there is no email bursting & broadcasting features available in dashboard so far.
Schedule and email Xcelsius dashboard
Automatic Emailing for Dashboards

How 2 assgin a character value to the auxillary cell

Hi,
I'm assigning a character value to the auxiliary cell in the macro. But it gives me a dump. So do let me know can I assign a character value to the auxiliary cell ( I need to display this value for the alert text).
Thanks,
Siva.

Why are you trying to use a character in the planning book - why not a representative value in numbers
but if you HAVE to use characteristic then you can also try to use the notes functionality (right click on a cell and go to notes if you have not seen this )
These notes are usually anchored to a cell. These notes are stored in a table (check in se 16 with wildcard on notes ) and is associated to the value of a cell
So if you can reference a cell value and put in the conditons to the values on it you might be able to manipulate the values in the table for notes and this will cause the notes in the interactive planning boo to change accoring to the value of the cell

Include character value variable processed by customer exit in the report

I have defined a character value variable' processed by 'customer exit'. i am troubleshooting a problem so I need to see the value of this variable. Is there a way to display this variable in the report. If so, what section, rows or columns? And how to configure?
Thanks,
Sharon

Hi,
You can add directly the variable, in BEx Analyzer 7.0 you can add variables in the Excel Cell that you would.
Steps:
- Select the Excel Cell
- In the BEx Design Toolbox, select Insert text
- When you are in Design Mode - click over the text element
- Go to Constants tab and select the Custom Exit Variable
- Save the workwook
Regards,
Dani

How i can display i_tab data in smartform as required

hi all
 i have tried a lot but not able to make logic for displaying data frm i_tab to SF as required ,
 my requirement is , i have data in i_tab as given below
field 1, 2,3,4, are TRNTYP CHAPID MATNR MAKTX OF J_1IEXCDTL respectivly.
GRPO 8707.00 0025F AC92 CON ROD FORGING.
ARE1 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
DLFC 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 now i want to display this data on SF like as :
discription of 8700.00
export against = ARE1
 1315F CONNECTING ROD
 1315F CONNECTING ROD
 1315F CONNECTING ROD 
 Way to Display :-
 1. Chapter id in one single line
 2. then if TRNTYP is ARE1 or ARE3 it should display in second single
 line. <not any other TRNTYP>
 3. then field no. 3 & 4 of i_tab should come based on TRNTYP
 please guide me and help me , if possible help me with dummy code example
or if not then help me to make logic by give hint,
 i have all related data in one single i_tab
Message was edited by: SACHIN
 sachin sharma

Hi
see this and do accordingly
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Smartform
you can check this link here you can see the steps and you can do it the same by looking at it..
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SMARTFORMS STEPS.
1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
2. Create Table type(t_struct) of stracture in se11.
3. In your program declare Internal table(Itab) type table of structure(struct).
4. Define work area(wa) like line of internal table.
5. Open Tcode Smartforms
6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
8. In form pages and window, create Page node by default Page1 is available.
9. In page node you can create numbers of secondary window. But in form there is only one Main window.
10. By right click on page you can create windows or Go to Edit, Node, Create.
11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
13. In table there are three areas Header, Main Area, Footer.
14. Right click on the Main area create table line by default line type1 is there select it.
15. Divide line into cells according to your need then for each cell create Text node.
16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
17. Save form and activate it.
18. Then go to Environment, function module name, there you get the name of function module copy it.
19. In your program call the function module that you have copied from your form.
20. In your program in exporting parameter of function pass the internal table(itab).
SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
configure forms with data from an SAP System for the relevant business processes.
To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
SAP Smart Forms also support postage optimizing.
Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
What Transaction to start SAP Smart Forms?
Execute transaction SMARTFORMS to start SAP Smart Forms.
Key Benefits of SAP Smart Forms:
SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
These actions do not include writing of coding lines or using a Script language.
Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
For Web publishing, the system provides a generated XML output of the processed form.
Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
Reward if useful
Anji

Values for the automatic posting items are invalid

Hi,
I'm doing two kinds of consolidations, both using its own Special Versions. IFRS and Local Accounting system (Portugal)
In IFRS the system it is working fine.
Although when I try to consolidate in Local Accounting, I have errors.
The customizing of the two special versions only differ in the consolidation of investments. In Local Accounting I have a different account in Net Income Prior to First Consolidation(Appropriation of retained earnings) and in Net Income Item of Statistical Net Income (Selected Items).
After doing this customizing, I tried the Consolidation of investments, and after executing the measure I have the following error "Values for the automatic posting items are invalid".
I can see the document that system is trying to post and everything seems fine. I only noticed that the statistical items are apeearing, which is not normal.
Do you what I'm missing or doing wrong?
I'm new to BCS.
Thanks in advance.
João Arvanas

The message is most likely regarding the posting to the Retained Earnings item defined in Selected Items. I've seen this before and do not recall the specific solution but it entailed using a different item for this.
It may be that the COI setting for displaying the statistical items in the log is version-dependent. If so it may be turned off. I think this is in location of values.

Error while assigning a character value to a numeric variable.

I fire a sql statement and check the number of rows returned by the sql.
I check this result with the application logs.
The application logs keeps the sqls fired by the application and the no of rows returned, in the example below the sql returned 8454 rows.
My script compares the two results.
***********Application Log***********
4/14/2008 11:15:01 AM: 0059 SQL SELECT "CLUSTER_CD",
4/14/2008 11:15:01 AM: 0060 "PRODUCT_DESC",
4/14/2008 11:15:01 AM: 0061 "TEAM_CD"
4/14/2008 11:15:01 AM: 0062 FROM "OPS$TMS"."MAP_CLUSTER_TEAM_PROD"
4/14/2008 11:15:01 AM: 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, 8,454 lines fetched
***********Application Log***********
My script:
#!/bin/ksh
typeset -i resA
typeset -i resB
opstms_conn_string="abc/[email protected]"
set `sqlplus -s $opstms_conn_string << EOF
set pages 0
WHENEVER SQLERROR CONTINUE
SELECT count(*)
FROM MAP_CLUSTER_TEAM_PROD;
exit
EOF`
resA=$1 ##returns 8454
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
##resB returns 8,454
## here i get syntax error
if [ $resA -eq $resB ]; then
echo "QA passed for sql1"
else
echo "QA failed for sql1"
fi
The problem is as resB is integer variable it does not accept character value: 8,454 so returns a syntax error:
How do I change the value assigned to resB into a numeric variable?
error:
+ grep 3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD, BCVP_Main_Loader.qvw.log
run.ksh[52]: 8,454: syntax error

Change:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}'`
to this:
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{print $10}' | tr -d ,`
to drop the comma. Or you could do it in awk(1):
resB=`grep '3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD,' BCVP_Main_Loader.qvw.log | awk '{ gsub( /,/, "", $10 ); print $10}'`
Or you could to it all in awk(1):
resB=`awk '
/3 fields found: CLUSTER_CD, PRODUCT_DESC, TEAM_CD/ {
gsub( /,/, "", $10 )
print $10
' BCVP_Main_Loader.qvw.log`
(This example was not tested, it's just for a model.)
Someone more of an SQL guru than I can probably tell you how to change your numeric locale to avoid presenting those commas in the first place and avoid the problem.
HTH

Strange Value in DISPLAY variable

Hello all,
in order to access remote Linux machines, I am running X11 on my iMac. For some reason this does not work anymore when connecting (ssh) from a "regular" bash (application Terminal) but it still works when I am accessing from the xterm-bash which was started with X11.
The error message indicates that the X-Server is not reachable.
Comparing the environment of the to bash', showed the culprit:
working: DISPLAY=/tmp/launch-Gu9ioY/:0
not working: DISPLAY=my_hostname:0.0
As far as I remember this was no issue with Tiger. Does anybody know what "/tmp/launch-Gu9ioY/:0" means? I have never seen this as a value for DISPLAY.
What does X11 sets here for DISPLAY?
Thx for your info on that!

X11 is completely rewritten in Leopard. The Leopard X11 sets DISPLAY for you and you should not override that. Edit anything left over from Tiger, such as .bash_profile, that is resetting DISPLAY. In other words, DISPLAY=/tmp/launch-Gu9ioY/:0 is correct; DISPLAY=my_hostname:0.0 is wrong.
Also note that Leopard's X11 will launch automatically when needed. You don't need to pre-launch it. For example, if you type "ssh -X" at the Terminal, X11 will launch.

How to create a report in Form line Style and can display Image field?

Hi,
In Report builder 10g, I would like to create a Report with Form Line Style and this report included a Image field.
I can choose this Style only when Select Report type is Paper Layout. Because, If I choose Create both Web & Paper Layout or Create Web Layout only then in the next Style tab 03 option Form, Form letter and Mailing Label be Disabled.
But in Paper Layout, my report can not display Image field.
I tried with Web layout and all the other Styles (Except 03 mentioned be Disabled) then all Styles are displayed Imager field OK.
How to create a report in Form line Style and can display Image field?
I was change File Format property of my Image field from text to Image already in Property Inspector. But report only showed MM for my Image field.
Thanks & regards,
BACH
Message was edited by:
bachnp

Here you go..Just follow these steps blindly and you are done.
1) Create a year prompt with presentation variable as pv_year
2) Create a report say Mid report with year column selected 3 times
- Put a filter of pv_year presentation variable on first year column with a default value say @{pv_year}{2008}
- Rename the second time column say YEAR+1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)+1
- Rename the second time column say YEAR-1 and change the fx to CAST(TIME_DIM."YEAR" AS INT)-1
Now when you will run Mid Report, this will give you a records with value as 2008 2009 2007
3) Create your main report with criteria as Year and Measure col
- Change the fx for year column as CAST(TIME_DIM."YEAR" AS INT)
- Now put a filter on year column with Filter based on results of another request and select these:
Relationship = greater than or equal to any
Saved Request = Browse Mid Report
Use values in Column = YEAR-1
- Again,put a filter on year column with Filter based on results of another request and select these:
Relationship = less than or equal to any
Saved Request = Browse Mid Report (incase it doesn't allow you to select then select any other request first and then select Mid Report)
Use values in Column = YEAR+1
This will select Year > = 2007 AND Year < = 2009. Hence the results will be for year 2007,2008,2009
This will 100% work...
http://i56.tinypic.com/wqosgw.jpg
Cheers

Character value can display automatically

Similar Messages

Maybe you are looking for