Characteristic of Data Type = Date follows User Profile Only

Hi All
In EHS SVT the characteristic TSCAList_Date [SAP_EHS_1023_053_DATE_LIST] is of Data Type = Date) and follows the date format defined in the User Profile of actual user.
If a user is using EU profile such as:
EU date format = 1 DD.MM.YYYY
EU decimal notation format = 1.234.567,89
If he enters a date in another format (Such as YYYY-MM-DD - 2010-03-27) than the one defined in the User Profile (DD.MM.YYYY - 27.03.2010); he will get an error message text: "Value (&) is not numeric"
Question:
How he can bypass this error and allow SAP make the conversion to changing the date entered (2010-03-27) to the one used in the User profile (27.03.2010)?
I will apreciate any Help
KO

Hello Ouadria
very interesting request indeed.
a.) my understanding of SAP GUI approach is: user has an user id and logon parameter
b.) by specifing an user profile some "default" set up should be used in further UI interaction in SAP GUI interface (especially date format etc.)
c.) Therefore it makes "no" sense to use a "different" format in entering a date etc. as specified in the user profile; in addition I believe the "look and feel" of the data (display and no maintain) is once again connected to the user profile, That means if you change the data in user profile the "date" format and "numeric" format should change in UI; this "change" should be active after saving the profile once again (regarding fonts etc. in UI: the change is done "immediate"; user profile changes is done in a further session and I believe the original session is not changed (not sure ..))
d.) indipendent on user profile the application makes sure that the data is written into the SAP internal format (date and numeric vlaue) into the tables
Coming with EH&S 2.7 you can use a new function in class/characteristic maintenance to change (display conversion in different allowed UOM) "UOMs" (etc.) and to get an idea which UOMs are allowed. I believe (not sure) that this new function should be available regarding characteristics of date format too. This function is "hidden" in some sense in the Menue (if I remember correct; i am not using it often).
May be you could think of a "tricky" way to use the user parametres (by preparing some programming) but I would not investigate the money (and time) but simple change the user profile enter the data and then change back the profile.
Different "easy" solution would be to use a second user id (one with default format DD.MM.YYYY and second with YYYY-MM-DD)
May be this helps
With best regards
C.B.
PS: Regarding UOM conversion: take a look here:
http://help.sap.com/erp2005_ehp_04/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
And search for topic: "Conversion of Units of Measurement" which can be found in "Editing Characteristic Values" which is subtopic of: "Value Assignment "
Edited by: Christoph Bergemann on Nov 19, 2010 10:08 PM
Edited by: Christoph Bergemann on Nov 19, 2010 10:11 PM

Similar Messages

Issue with Data type 'Date' in Hyperion Planning V11.1.2.2

Hi,
I have created members with data type date. However when I save the date, it either disappears or comes up with a random date? Has any one come across this kind of problem before?
If so can you share the fix.
Thanks in advance for your help.
Cheers,
XXX

Hi
This problem is linked to you not having a consistent setting for your date input type.
So, go to application administration and set the date format to MM/DD/YYYY in application settings and display options, under current application defaults. Then after you have done this as a user go to User Preferences and display options and on the date format select the same. Or remove the Automatically detect.
I have seen this behaviour if you have Automatically Detect on the user preferences
Thanks
Anthony

Handle null value in char infoobject -data type DATE(ora-01722 invalid num)

Hi,
We have a DSO with a info object in the Data fields. The char info object has the data type DATE and most often it has the null value. but some times it has data in it.
When ever we were trying to run a report on the DSO it throws a error as ORA- 01722 INVALID NUMBER.
we tried editing PSA data and placing 00000000 for null values - and had a message invalid date.
suggestions pls
Regards.

Hello,
Please check the note given below
https://service.sap.com/sap/support/notes/1327167.
If null value is the problem, change the query setting for not to show the null values. Just add a filter in ZDAT to exclude "NULL"
Thanks
Nidhi

Is it possible to install a software to a one particular user profile only on my Mac?

Is it possible to install a software to a one particular user profile only on my Mac?

Create an Applications folder in the user's Home folder. Install the application to that /Home/Applications/ folder. To create a new folder in the Home folder press COMMAND-SHIFT-N. Rename the new folder Applications.

Idoc message type which contains all data types & date format

Hello experts,
I have Two questions :
1.Need Idoc message type which has all sap data types (24 types).
2. I am getting output date in 31-05-1999, whereas am expecting 5/31/1999.
is there anything to be done at system level, since same Func Mod gives expected output in 4.7 verions, whereas in ecc 6.0 version it doesnt.
Thnx in advance

Hi Taj,
The date format usually depends upon the user settings in SAP. for this check your user settings... Go to menubar - > System - > user profile -> own data ->defaults tab -> change the date format in which you want.
Or else.......
There is a conversion exit to change the date in the format you wish to get.... use the Function Module FORMAT_DATE_4_OUTPUT and give the date and the format in which you want to print as input parameters.
Hope this helps.
Regards,
Ravikiran.

Change "String" into data type "Date"

Hi,
I have created a report containing several date fields for a plan/actual comparison. The connection is built up by using the jdbc connector.
My problem is that the date fields are only displayed as String, but I actually want them to be displayed as Date type.
Here an example:
Right now the date fields are displayed like this "20060411"
but I want them to be displayed like this ("11/04/2006", or similar).
I would appreciate any suggestions to solve this problem!
Cheers
Thomas

Hi Thomas,
Check out the following links :
http://help.sap.com/saphelp_nw04/helpdata/en/55/55a34098022a54e10000000a1550b0/content.htm
http://help.sap.com/download/netweaver/nw04/visualcomposer/VC_60_UserGuide_v1_1.pdf
Re: Custom message in VC
Thanks in advance,
Deep.

Change what data type data socket requests from OPC server

I suspect this is a foregone conclusion, however just in case; is there a way to make Datasocket request items from an OPC server in a different data type than variant?
I have a server that scales integers (native data type) and offers tham as floating point values, however to get those nice floats the client must request the data in the right type. If the client asks for a variant the server will return the integer value (e.g. 2 instead of 2,36...).
I have not checked whether this is a server behaviour as it must be (according to OPC specs) or if it's just a choice by the vendor (Automated Solutions), but still it may become an obstacle.
Has anyone implemented OPC Client functionality without using Datasocket (and server for that matter)? Any software componants you can recommend?
MTO

Hi Mats
I once found vi's (..\vi.lib\Platform\dataskt.llb) with different read- and write-types. In fact they are all wrapping up the read- & write-variant functions.
I use them to communicate with Siemens OPC-Scout and it works. They make life a little easier .
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

User-Defined Data Type (Data Transfer Objects) is null

hi
i try to access a nested complex datatype over blazeds. i always see that the second level of the complex datatye is NULL but the other data's like String are ok.
here an example:
as you can see TT1 has a member TT2, and a String
TT2 has a member TT3 and a string
and TT3 has just a string.
in the ActionScript the TT2 referenz in TT1 is always NULL.
Java Code
Java code:
package clientreportingserver;
public class TT1 {
    public String getT1s() {
        return t1s;
    public void setT1s(String t1s) {
        this.t1s = t1s;
    String t1s;
    public TT2 getTt2() {
         return tt2;
    public void setTt2(TT2 tt2) {
         this.tt2 = tt2;
    TT2 tt2;
=================================================
package clientreportingserver;
public class TT2 {
    public String getT2s() {
        return t2s;
    public void setT2s(String t2s) {
        this.t2s = t2s;
    String t2s;
    public TT3 getTt3() {
         return tt3;
    public void setTt3(TT3 tt3) {
         this.tt3 = tt3;
    TT3 tt3;
=================================================
package clientreportingserver;
public class TT3 {
     public String getT3s() {
        return t3s;
    public void setT3s(String t3s) {
        this.t3s = t3s;
    String t3s;
ActionScript DataType
package clientreporting.model
import mx.collections.ArrayCollection;
[RemoteClass(alias="clientreportingserver.TT1")]
[Bindable]
public class TT1
    public var t1s:String;
    public var t2:TT2
====================================================================
package clientreporting.model
import mx.collections.ArrayCollection;
[RemoteClass(alias="clientreportingserver.TT2")]
[Bindable]
public class TT2
    public var t2s:String;
    public var t2:TT3
===================================================================
package clientreporting.model
import mx.collections.ArrayCollection;
[RemoteClass(alias="clientreportingapi.TT3")]
[Bindable]
public class TT3
    public var t3s:String;
here the output from blazeds. for me it looks perfect, all data are transmitted
BlazeDs output
[BlazeDS]Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/5)
    (Array #0)
      [0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
        source = null
        operation = "getTT"
        destination = "exposedServiceWrapper"
        clientId = "E57066B1-170E-503A-D4EC-004166E95FC3"
        body = (Array #1)
        timeToLive = 0
        headers = (Object #2)
          DSEndpoint = "channel-amf"
          DSId = "E570490A-C218-4A29-4229-8CD6F29222FC"
        timestamp = 0
        messageId = "5FDB47AD-9066-DD95-4CD4-0CE0D3F6C337"
[BlazeDS]Adapter 'java-object' called 'null.getTT(java.util.Arrays$ArrayList (Collection size:0)
[BlazeDS]Result: 'clientreportingserver.TT1
t1s = TT 1 String
tt2 = clientreportingserver.TT2
    t2s = TT 2 String
    tt3 = clientreportingserver.TT3
      t3s = TT 3 String
[BlazeDS]Serializing AMF/HTTP response
Version: 3
(Message #0 targetURI=/5/onResult, responseURI=)
    (Externalizable Object #0 'DSK')
      (Typed Object #1 'clientreportingserver.TT1')
        t1s = "TT 1 String"
        tt2 = (Typed Object #2 'clientreportingserver.TT2')
          t2s = "TT 2 String"
          tt3 = (Typed Object #3 'clientreportingserver.TT3')
            t3s = "TT 3 String"
1.262936445958E12
(Byte Array #4, Length 16)
(Byte Array #5, Length 16)
(Byte Array #6, Length 16)
the last Alert (accessing t2) got always a null pointer, the fist Alert works fine and print out the string i expected to see
call in ActionScript
    public function loadTT():void {
       _policyService.getTT(loadTTHandle);
    private function loadTTHandle(content:TT1):void {
       Alert.show("" + content.t1s);
       Alert.show("" + content.t2.t2s);
is it possible to access a nested complex type? i only could find simple examples.
thanks for your help joe

I found the problem
in the flashlog.txt i found :ReferenceError: Error #1056: Cannot create property AFoo on [...]
this let me to this blog http://blog.comtaste.com/java/ ==>
Automating ActionScript 3 classes generation from Java Beans in a LiveCycle Data Services context
it was a naming problem.

HTMLDB search on columns defined as data type date

I have a HTMLDB applications that has a date column in the report. When I search and enter a date, no rows are returned. How do I enter the date in search text so that rows are returned?

Hi Suresh:
This is what I would do.
Here is the demo...Hope this will help.
BHAVESH@oracle10> create table suresh(created_date date, attribute1 varchar2(20));
Table created.
BHAVESH@oracle10> desc suresh
Name Null? Type
CREATED_DATE DATE
ATTRIBUTE1 VARCHAR2(20)
BHAVESH@oracle10> insert into suresh values (sysdate,to_char(sysdate,'yyyy/mm/dd hh:mm:SS'));
1 row created.
BHAVESH@oracle10> insert into suresh values (null,to_char(sysdate,'yyyy/mm/dd hh:mm:SS'));
1 row created.
BHAVESH@oracle10> select * from suresh;
CREATED_DATE ATTRIBUTE1
01/01/2009 11:24:08 AM 2009/01/01 11:01:08
2009/01/01 11:01:28
BHAVESH@oracle10> -- please notice my nls_date_format is mm/dd/yyyy hh:mi:ss AM
BHAVESH@oracle10> -- which can be changed to anything...use alter session or on windows..using registry..or on server
BHAVESH@oracle10> -- ....using nls_date_format init parameter.
BHAVESH@oracle10> alter session set nls_date_format = 'DD-MM-YYYY';
Session altered.
BHAVESH@oracle10> select * from suresh;
CREATED_DA ATTRIBUTE1
01-01-2009 2009/01/01 11:01:08
2009/01/01 11:01:28
BHAVESH@oracle10> -- however, this may not work for you.
BHAVESH@oracle10> -- so, you can convert the date in the format you want
BHAVESH@oracle10> select to_char(created_date,'DD-MM-YYYY') as converted_date, ATTRIBUTE1 from suresh;
CONVERTED_ ATTRIBUTE1
01-01-2009 2009/01/01 11:01:08
2009/01/01 11:01:28
BHAVESH@oracle10> -- now use the decode function
BHAVESH@oracle10> ed
Wrote file afiedt.buf
1* select s.*, to_char(decode(created_date,null,to_date(ATTRIBUTE1,'yyyy/mm/dd hh:mi:ss')),'dd-mm-yyyy') as new_date from suresh s
BHAVESH@oracle10> /
CREATED_DA ATTRIBUTE1 NEW_DATE
01-01-2009 2009/01/01 11:01:08
2009/01/01 11:01:28 01-01-2009
If your date format is different under the attribute1 column, then you have to write a PL/SQL function to handle different date formats under the same column of different column!
THanks
- Bhavesh

Script to delete users profile only months old profile with the Registry itself but should leave current profile intact.

Hi every one.
first of all sry if this post is repetitive for the profile deletion.
If you have a correct link please post it below or the script itself.
Question: as i have a lot of computers with windows 7 (2400 systems) as the operating system on them and as the users keep on changing or shifting place from one PC to another PC and managing the system or the C drive for the consistent system performance
or freeing space is a challenging task.
I would like have a Script that would only delete old (No of Months) profile as well as the registry itself but should keep the current profile instanct the the registry too.
I did find the below script on some forum that gets the job done but not the right way as it deletes all the profile and excludes the admin,administrator etc as seen in the script but i cannot delete the old profile of a certain time or date period.
As again sorry if this post looks like mess but help is appreciated
@echo off
' DELETES LOCAL PROFILES ON WINDOWS 7
:START
FOR /f "tokens=*" %%a IN ('dir c:\USERS /b /ad') DO CALL :PATHCHECK "%%a"
GOTO REGISTRY
::The following is where you would put in the profile you wish to exclude from the wipe. Just copy/paste a line and make the appropriate revisions.
:PATHCHECK
IF /i [%1]==["Administrator"] GOTO :PATHSKIP
IF /i [%1]==["Admin"] GOTO :PATHSKIP
IF /i [%1]==["All Users"] GOTO :PATHSKIP
IF /i [%1]==["Default"] GOTO :PATHSKIP
IF /i [%1]==["Default user"] GOTO :PATHSKIP
IF /i [%1]==["public"] GOTO :PATHSKIP
GOTO PATHCLEAN
:PATHSKIP
ECHO. Skipping path clean for user %1
GOTO :EOF
:PATHCLEAN
ECHO. Cleaning profile for: %1
rmdir C:\USERS\%1 /s /q > NUL
IF EXIST "C:\USERS\%1" GOTO RETRYPATHFIRST
IF NOT EXIST "C:\USERS\%1" GOTO :EOF
:RETRYPATHFIRST
ECHO. Error cleaning profile for: %1 - Trying again.
rmdir C:\USERS\%1 /s /q > NUL
IF EXIST "C:\USERS\%1" GOTO RETRYPATHSECOND
IF NOT EXIST "C:\USERS\%1" GOTO :EOF
:RETRYPATHSECOND
ECHO. Error cleaning profile for: %1 - Trying again.
rmdir C:\USERS\%1 /s /q > NUL
GOTO :EOF
:REGISTRY
ECHO.------------
FOR /f "tokens=*" %%a IN ('reg query "hklm\software\microsoft\windows nt\currentversion\profilelist"^|find /i "s-1-5-21"') DO CALL :REGCHECK "%%a"
GOTO VERIFY
::The following is where it parses the registry data and checks it against the user path. Copy/paste the IF line and make the user modification needed.
:REGCHECK
FOR /f "tokens=3" %%b in ('reg query %1 /v ProfileImagePath') DO SET USERREG=%%b
IF /i [%USERREG%]==[c:\Users\Administrator] GOTO :REGSKIP
GOTO REGCLEAN
:REGSKIP
ECHO. Skipping registry clean for %USERREG%
GOTO :EOF
:REGCLEAN
ECHO. Cleaning registry for: %USERREG%
reg delete %1 /f
GOTO :EOF
::The cleaning portion of the script is now done. Now begins the verification and log reporting.
:VERIFY
FOR /f "tokens=*" %%c IN ('dir c:\USERS /b /ad') DO CALL :VERIFYPATH "%%c"
::Same thing as the clean - if you need to exclude an account, make your copy/paste below.
:VERIFYPATH
IF /i [%1]==["Administrator"] GOTO :EOF
IF /i [%1]==["All Users"] GOTO :EOF
IF /i [%1]==["Default"] GOTO :EOF
IF /i [%1]==["Default user"] GOTO :EOF
IF /i [%1]==["public"] GOTO :EOF
GOTO VERPATHREPORT
:VERPATHREPORT
ECHO. %1
IF /i [%1]==[] (
set PATHRESULT=PATH_SUCCESS
) ELSE (
set PATHRESULT=PATH_FAILURE
ECHO. %PATHRESULT%
GOTO REGVERIFY
:REGVERIFY
ECHO.------------
FOR /f "tokens=*" %%d IN ('reg query "hklm\software\microsoft\windows nt\currentversion\profilelist"^|find /i "s-1-5-21"') DO CALL :REGCHECKVERIFY "%%d"
GOTO REGVERIFYECHO
::Same thing as the registry clean - copy/paste excluded profiles below.
:REGCHECKVERIFY
FOR /f "tokens=3" %%e in ('reg query %1 /v ProfileImagePath') DO SET USERREGV=%%e
IF /i [%USERREGV%]==[c:\Users\Administrator] GOTO :EOF
GOTO REGVERIFYECHO
:REGVERIFYECHO
ECHO. %1
IF /i [%1]==[] (
set REGRESULT=REG_SUCCESS
) ELSE (
set REGRESULT=REG_FAILURE
ECHO. %REGRESULT%
GOTO REPORTCHECK
::The following is where you would enter the mapped drive path.
::You can use a straight UNC if you like, but I find this to be a bit
::more solid and it allows you to use different creds in case you
::automate it for a local scheduled task to run as local admin.
:REPORTCHECK
'net use t: \\server\path
'IF EXIST "t:\labreport.txt" (
'GOTO REPORTGEN
') ELSE (
'GOTO EXIT
::This is a time/date stamp creator that I actually pulled from a Minecraft
::to Dropbox backup script I made a long while back.
':REPORTGEN
'FOR /F "tokens=1 delims=:" %%f in ('time /T') DO SET T=%%f
'FOR /F "tokens=*" %%g in ('echo %date:~10,4%-%date:~4,2%-%date:~7,2% %T%-%time:~3,2%-%time:~6,2%') DO SET TDATETIME=%%g
ECHO. %PATHRESULT% %REGRESULT% %COMPUTERNAME% %TDATETIME% >> "t:\labreport.txt"
net use t: /delete
GOTO EXIT
:EXIT
exit
:EOF

Hi every one.
first of all sry if this post is repetitive for the profile deletion.
If you have a correct link please post it below or the script itself.
Question: as i have a lot of computers with windows 7 (2400 systems) as the operating system on them and as the users keep on changing or shifting place from one PC to another PC and managing the system or the C drive for the consistent system performance
or freeing space is a challenging task.
I would like have a Script that would only delete old (No of Months) profile as well as the registry itself but should keep the current profile instanct the the registry too.
I did find the below script on some forum that gets the job done but not the right way as it deletes all the profile and excludes the admin,administrator etc as seen in the script but i cannot delete the old profile of a certain time or date period.
As again sorry if this post looks like mess but help is appreciated
@echo off
' DELETES LOCAL PROFILES ON WINDOWS 7
:START
FOR /f "tokens=*" %%a IN ('dir c:\USERS /b /ad') DO CALL :PATHCHECK "%%a"
GOTO REGISTRY
::The following is where you would put in the profile you wish to exclude from the wipe. Just copy/paste a line and make the appropriate revisions.
:PATHCHECK
IF /i [%1]==["Administrator"] GOTO :PATHSKIP
IF /i [%1]==["Admin"] GOTO :PATHSKIP
IF /i [%1]==["All Users"] GOTO :PATHSKIP
IF /i [%1]==["Default"] GOTO :PATHSKIP
IF /i [%1]==["Default user"] GOTO :PATHSKIP
IF /i [%1]==["public"] GOTO :PATHSKIP
GOTO PATHCLEAN
:PATHSKIP
ECHO. Skipping path clean for user %1
GOTO :EOF
:PATHCLEAN
ECHO. Cleaning profile for: %1
rmdir C:\USERS\%1 /s /q > NUL
IF EXIST "C:\USERS\%1" GOTO RETRYPATHFIRST
IF NOT EXIST "C:\USERS\%1" GOTO :EOF
:RETRYPATHFIRST
ECHO. Error cleaning profile for: %1 - Trying again.
rmdir C:\USERS\%1 /s /q > NUL
IF EXIST "C:\USERS\%1" GOTO RETRYPATHSECOND
IF NOT EXIST "C:\USERS\%1" GOTO :EOF
:RETRYPATHSECOND
ECHO. Error cleaning profile for: %1 - Trying again.
rmdir C:\USERS\%1 /s /q > NUL
GOTO :EOF
:REGISTRY
ECHO.------------
FOR /f "tokens=*" %%a IN ('reg query "hklm\software\microsoft\windows nt\currentversion\profilelist"^|find /i "s-1-5-21"') DO CALL :REGCHECK "%%a"
GOTO VERIFY
::The following is where it parses the registry data and checks it against the user path. Copy/paste the IF line and make the user modification needed.
:REGCHECK
FOR /f "tokens=3" %%b in ('reg query %1 /v ProfileImagePath') DO SET USERREG=%%b
IF /i [%USERREG%]==[c:\Users\Administrator] GOTO :REGSKIP
GOTO REGCLEAN
:REGSKIP
ECHO. Skipping registry clean for %USERREG%
GOTO :EOF
:REGCLEAN
ECHO. Cleaning registry for: %USERREG%
reg delete %1 /f
GOTO :EOF
::The cleaning portion of the script is now done. Now begins the verification and log reporting.
:VERIFY
FOR /f "tokens=*" %%c IN ('dir c:\USERS /b /ad') DO CALL :VERIFYPATH "%%c"
::Same thing as the clean - if you need to exclude an account, make your copy/paste below.
:VERIFYPATH
IF /i [%1]==["Administrator"] GOTO :EOF
IF /i [%1]==["All Users"] GOTO :EOF
IF /i [%1]==["Default"] GOTO :EOF
IF /i [%1]==["Default user"] GOTO :EOF
IF /i [%1]==["public"] GOTO :EOF
GOTO VERPATHREPORT
:VERPATHREPORT
ECHO. %1
IF /i [%1]==[] (
set PATHRESULT=PATH_SUCCESS
) ELSE (
set PATHRESULT=PATH_FAILURE
ECHO. %PATHRESULT%
GOTO REGVERIFY
:REGVERIFY
ECHO.------------
FOR /f "tokens=*" %%d IN ('reg query "hklm\software\microsoft\windows nt\currentversion\profilelist"^|find /i "s-1-5-21"') DO CALL :REGCHECKVERIFY "%%d"
GOTO REGVERIFYECHO
::Same thing as the registry clean - copy/paste excluded profiles below.
:REGCHECKVERIFY
FOR /f "tokens=3" %%e in ('reg query %1 /v ProfileImagePath') DO SET USERREGV=%%e
IF /i [%USERREGV%]==[c:\Users\Administrator] GOTO :EOF
GOTO REGVERIFYECHO
:REGVERIFYECHO
ECHO. %1
IF /i [%1]==[] (
set REGRESULT=REG_SUCCESS
) ELSE (
set REGRESULT=REG_FAILURE
ECHO. %REGRESULT%
GOTO REPORTCHECK
::The following is where you would enter the mapped drive path.
::You can use a straight UNC if you like, but I find this to be a bit
::more solid and it allows you to use different creds in case you
::automate it for a local scheduled task to run as local admin.
:REPORTCHECK
'net use t: \\server\path
'IF EXIST "t:\labreport.txt" (
'GOTO REPORTGEN
') ELSE (
'GOTO EXIT
::This is a time/date stamp creator that I actually pulled from a Minecraft
::to Dropbox backup script I made a long while back.
':REPORTGEN
'FOR /F "tokens=1 delims=:" %%f in ('time /T') DO SET T=%%f
'FOR /F "tokens=*" %%g in ('echo %date:~10,4%-%date:~4,2%-%date:~7,2% %T%-%time:~3,2%-%time:~6,2%') DO SET TDATETIME=%%g
ECHO. %PATHRESULT% %REGRESULT% %COMPUTERNAME% %TDATETIME% >> "t:\labreport.txt"
net use t: /delete
GOTO EXIT
:EXIT
exit
:EOF

Adobe plugin crash - one user profile only

HI
I have been using adobe flash with no problems until yesterday. I go onto facebook and the page loads but when I go to "home " on facebook a message states flash plugin has crashed reload again. I was using IE but loaded Mozilla firefox. I uninstalled flash and reloaded and still same problem.
I logged on to another user name on the same laptop and the problem did not occur. How can I fix this ? Should I just create a new user ?

I'd try Refreshing Firefox first:
Refresh Firefox - reset add-ons and settings | Firefox Help
If that doesn't work, you might give the Firefox ESR a spin. Mozilla has been experimenting on their own recently with a number of changes that impact Flash.
Firefox Extended Support Release FAQ — Mozilla
If that doesn't work, do you have better results with Google Chrome, or are you seeing similar problems across multiple browsers?

IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.

I am trying to modify the value of the field "Job Code" through API I am getting the following error.(OIM11gr2). I do not get this error when updating the other fields. There is a field by the name USR_JOB_CODE in the database. When I poked around I found that there is no Job Code field in the User Form. Any ideas?
IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
oracle.iam.identity.exception.ValidationFailedException: IAM-3056160:Modify User Profile request cannot set or change attribute Job Code, since it is not defined in the corresponding data set.:Modify User Profile:Job Code
       at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:237)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
       at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
       at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_1036_WLStub.modifyx(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
       at java.lang.reflect.Method.invoke(Unknown Source)
       at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
       at $Proxy2.modifyx(Unknown Source)
       at oracle.iam.identity.usermgmt.api.UserManagerDelegate.modify(Unknown Source)
       at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
       at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
       at sun.reflect.DelegatingMethodAccessorImpl.invoke

THanks for your reply. Here is the snippet from User.xml that contains info about job code.
<entity-attribute>Job Code</entity-attribute>
<target-field>usr_job_code</target-field>
<field name="usr_job_code">
<type>string</type>
<required>false</required>
</field>
<attribute name="Job Code">
<type>string</type>
<required>false</required>
<searchable>true</searchable>
<multi-valued>false</multi-valued>
<MLS>false</MLS>
<multi-represented>false</multi-represented>
<attribute-group>Basic</attribute-group>
<metadata-attachment>
<metadata>
<name>multi-valued</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>user-searchable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>category</name>
<value>Preferences</value>
<category>properties</category>
</metadata>
<metadata>
<name>bulk-updatable</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>read-only</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>visible</name>
<value>true</value>
<category>properties</category>
</metadata>
<metadata>
<name>encryption</name>
<value>CLEAR</value>
<category>properties</category>
</metadata>
<metadata>
<name>display-type</name>
<value>TEXT</value>
<category>properties</category>
</metadata>
<metadata>
<name>system-controlled</name>
<value>false</value>
<category>properties</category>
</metadata>
<metadata>
<name>max-size</name>
<value>512</value>
<category>properties</category>
</metadata>
<metadata>
<name>custom</name>
<value>false</value>
<category>properties</category>
</metadata>
</metadata-attachment>
</attribute>
I am able to retrieve the value of the Job Code attribute without any problem with the following code.
System.out.println("JOB Code: "+user.getAttribute("Job Code"));

User Data Type

Visual Basic has the capability to define a User Data Type as
follows:
Type myDataType
foo as Boolean
bar as Integer
anArray(1 to 10) as Integer
end Type
Then you can create a new array of this this type as follows:
myNewVariable(1 to 5) as myDataType
and access the first member of the array and its submembers
as follows:
myNewVariable(1).foo = True
myNewVariable(1).bar = 23
myNewVariable(1).anArray(8) = 41
All of the submembers are strictly typed.
I would like to do the same thing in Actionscript 2.0. I
assume I would do this by creating a
class myDataType extends Array {
function myDataType(){
but I can't figure out how to create and strictly type the
submembers of myDataType, so that I can access them from an
instance of an array of myDataType in a fla file.
var myNewVariable:myDataType = new myDataType(5);
myNewVariable(1).foo = True;
myNewVariable(1).bar = 23;
myNewVariable(1).anArray = new Array(10);
Is there a way to do what I want?
Thanks in advance.

You can do this with classes in an .as file.

OIM 11g Modify User Profile for Updating End Date

Hi Gurus!
We have an OIM implementation where users may request the creation of other users by means of a Create User request template. In this template we set the End Date to be 3 months after the request date.
In order for the requester to extend the period of a user's OIM user account (along with its provisioned resources) we customized a Modify User Profile by displaying the End Date field and automatically populate it again to 3 months after the request date. Also we developed a custom event handler to enable the user when it is disabled and the End Date is updated to a future date.
This Modify User Profile is working great when the user is still enabled (the End Date is still in the future), however, when the End Date has passed (and the user is Disabled) the requester is not able to see the user when selecting the Modify User Profile request template.
Is there a way to allow requesters to also see disabled users in the Modify User Profile request template?
Thank you in advance.
Regards,

Hi Kevin,
thanks for your reply!
But, in this case, when the user is already disabled due to his End Date, how can a requester, through the Self Service TAB, enable it?
The Enable User request template does not work since when trying to enable the user, OIM sees the End Date is already passed and the DataSet validation throws an exception.
The only way I saw was providing a Modify User Profile Request template to change the End Date and developing a custom event handler to enable the user upon the extension of the End Date...
How can, in this situation, a requester enable the user and extend its End Date?
Thank you!
Regards,

Exception Reporting based on a characteristic of type DATE

Hi Friends,
I am new to this community. Please help me in solving the below problem about exception.
There is an infoobject 0CSM_PLDA (Planned closed date). It is an charactesitic of data type 'DATE'. And my requirement is that for an infoobject 0CSM_PLDA <b>I have to create an alert based on difference between SYSDAT and 0CSM_PLDA :</b>
Good - < 5 days
Medium between 5 and 2 days
Bad <1 day
So please tell me
1. How to find out the difference between SYSDAT and 0CSM_PLDA ? Where does Sysdat is avaialble in BW?
2. 0CSM_PLDA is a characteristic of type DATE and as you know Exception generally supports keyfigure...then tell me how to solve this?
Please answer in detail. Thanks----Sasi.<b></b>

Hi Stefan,
Still I couldn't find the solution.
0CRM_PLDA is a characteristic of type DATE. And SYSDAT we can assume it as a characteristic of type DATE.
How can you find out the difference between two characteristic of type DATE. In formula, its possible to perform calculations only on keyfigures. So finding the difference is the complex one for me.
Even I tried with formula replacement for an 0crm_plda. Its not helpful.
please guide me in solving the problem.
Thanks,
Sasi

Characteristic of Data Type = Date follows User Profile Only

Similar Messages

Maybe you are looking for