Characteristics Display for Overview Screen

Hello,
I know one solution to this problem, but i need a simply one. The one i know is using user-exit and adding a new field in VBAP.
I explain my doubt...
I put one characteristic into overview screen (RV45A-MWERT01). I need to know if this field is in a transparent table to simplify a proccess of us.
Thanks for your time.

Hello Mangesh,
did you try to access the variant configuration through the normal valuation screen?
If does not work, then you have probably not set up the variant configuration correctly.
Then you should take a look into PMEVC and test your configuration model.
If this works ok, let me know. Then you may have to manually select a characterstics display.
Best regards,
Stefan

Similar Messages

Multi-language display for the screens display

Hi,
we want to have the display in different languages for the text displayed on the control panel.
please confirm is it possible with the lookout so that we can change the language as per our choice for the displayed texts.

The only method I can suggest would to use a DataTable with the text of each label inside.
1 2 3 4 5
A English Stop Go On Off
B Spanish Alto Ir En Apagado
C German Halt Gehen Auf Ab
(Example, translations are probably not 100% )
Forshock - Consult.Develop.Solve.

Clickonce application can't run on Linx 10 Windows tablet for full screen

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu
Hello Mingxu,
Maybe you mean your project is a windows form application, and you deployed it with ClickOnce and get that installed, right?
>>My Clickonce application can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen.
Which form has this issue, the one when you installing that application or the form you are running the application?
I will based on the result to get the proper forum to help you, and if that is an issue about the form of your windows form application, then this is the right forum for your issue.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to display fields in IT0002 to PA30 overview screen for IT0024(Qualifi)

Hi,
I have a requirement where I want to display two fields NACHN and VORNA on PA30 overview screen for IT0024(Qualifcations).
How can I achieve this?
Thanks,
Ameet

Hi,
There is no harm in enhancing IT0024 using PM01. However, these two fields added to P0024 using Customizing Include, happen to be display only fields over the overview screen of PA30 for IT0024.
Now to write a query in PBO of generated module pools after clicking on the button labled Generate Objects, how to take care of delimited records in both infotypes.
Thanks,
Ameet

Display description in Overview screens

I am currently working on the Overview Screens for Personal Data, Address etc., and need your inputs on below:
1. how to display the "description" instead of codes/key for the fields like Preferred language(dropdown), Gender (radio button), State (dropdown) on the Overview Screens in the respective applications.
2. is there a best practice to show a generic error message when the screen is locker by a user ? please share the details.
3. how to display the values of from different fields like communication type, area code and telephone number on the Overview screen. for ex: Communication Type 1: CELL 123-4567890
Version: EHP3
Appreciate your inputs.
Thanks,
Amar Challa

Amar,
For requirements 1 and 3 you need to change the webdynpro for java code and you need NWDI for that.
for requirement 2 you cannot have control for displaying custom message because it is webdynpro for java code
Thanks
Bala Duvvuri

Display Button on Overview Screen of iView

Hello,
Would someone please help me understand how I can insert a 'Display' button on an iView? Basically the requirement is as follows:
The Personal Data iView is something for which I dont want to give Edit access to the users. I know I can disable the Edit button through iView personalization, and it works great. However, now the problem is the only 2 fields you can see on the overview screen are Full Name and SSN. Can we put a 'Display' button on the overview screen such that the user can view all the Personal Data fields, without having to go to Edit screen?
The same is the requirement for all iViews. Would someone please let me know how would this be possible without custom coding; if there is a way to do it.
Thanks,
Nakul

Jay,
Thanks so much for the answer!! Sometimes after knowing the answer, it feels it was so easy all the time; why did I not think about it!! ".
That defenitely solves the Personal Data issue.
Just before I mark this thread answerd and close it; another question:
The other past is, can I add another Button for Display apart from the Edit button? For some iViews I may want to have both Edit and Display buttons on the overview screen. How would I meet this requirement?
Thanks,
Nakul

User exit/BADI for VT03N Shipment overview screen

Hi All,
I have a requirement to add a custom field to the shipment overview screen. This field will be populated with one of the special partner function on the delivery and should be displayed in the shipment overview screen.
Are there any user exits/BADI's available for the same?
Regards,
Nilesh.

Hi Nilesh,
in our ECC600 system I found the implementation /DSD/CL_IM_RP_SHPMNT_EXT. Please have a look at the methods implementation, this may provide a solution for you.
You can also check the customizing IMG. For sales and distributuion you can find a lot of text documents explaining customer extensions.
Kind regards
Clemens

Exits for LT03 stock overview screen

Hi Team,
There is a requirement to add new coloumn to the exsisting layout of LT03 stock overview screen.After adding i need to populate Parent SU details in the new coloumn.I have searched for the exits but not able to find.Can you please help me on this one..
Thanks and Regards,
Shakeer

Hello Shakeer,
check with the below user exits, if there is any screen exit available which meets your requirement and then implement it.
MWMTO001 Enhancements for end of transfer order generation
MWMTO012 Correction of Sorting and Split Transfer Order
MWMTR001 Exits at the end of transfer rqmnt creation (IM,PP interf.)
MWM2S001 Exit to Determine 2-Step Picking Characteristic
MWMBAP01 Enhancement for BAPI WarehouseTransOrder.GetDetail
MWMBAP02 Enhancement for BAPI WarehouseStock.GetDetail
MWMD0001 Transfer order print via RLVSDR40
MWMD0002 Transfer order print as multiple process with RLKOMM40
MWMIDI07 Enhancement for Output WMPIHU (Create Pick-HU) Inbound
MWMIDO11 Enhancement for message WMTORD: TO with several items
MWMIDO12 Enhancement for Output WMPIHU (Pick-HUs) Outbound
MWMIDO13 Extension for WMMBXY (subsequent tasks after goods move
MWMPP001 Enhancement WM/PP Interface (automatic TR generation)
MWMRF001 RF: Influence Display of material description
MWMRF100 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0100)
MWMRF101 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0101)
MWMRF102 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0102)
MWMRF104 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0104)
MWMRF105 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0105)
MWMRF106 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0106)
MWMRF107 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0107)
MWMRF108 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0108)
MWMRF151 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0151)
MWMRF152 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0152)
MWMRF153 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0153)
MWMRF170 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0170)
MWMRF202 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0202)
MWMRF203 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0203)
MWMRF204 ENHANCEMENT FOR USER SCREENS (LOGICAL SCREEN 0204)
Regards,
TP

Balanced Scorecard overview screen-trees to be displayed in collapse mode

When the user logs into Balanced Scorecard overview screen all the trees are displayed in expanded mode, need to display the trees in collapse mode by default. i.e Only nodes visible should be top level hierarchy nodes. The user should be able to decide which nodes he wants to expand.

Hi RP,
1. 0SEM_C02 can typically be used to store all the initiatives. Please note that initiatives can be linked to Project Systems in SAP R/3 and the project data can be automatically brought over to initiatives. Now it may happen that not all of those initiatives may be dependent on scorecards and there can be scorecard independent initiatives. The business content cube that you mentioned can be used to store and report on such inititives and their links to scorecards if any.
2. What infoobjects to have in the scorecard cube depends upon your requirements and there is not a good or bad choice here. If you choose 0SEM_POSIT as one of the infoobjects, then you can easily access all the measures.
3. The data read from BW or buffer also depends upon your performance requirements. If your situation is such that you must report the latest data in BW all the time, then reading from buffer only will not serve your purpose because the data will be read only from the buffer and not from the cube. In that case, you may have to fill the buffer often to keep the buffer data up to date. If you select read from Bw only, then it will bypass your buffer and for every small request, it will access the infocube(s). This may be performace drag depending upon the size of the data, performance of the related queries etc. If you choose read from buffer/BW with latest time stamp, then it will access BW only if latest data resides there. This may not be a good option if the performace is a prime concern. Ofcourse if you are using BIA, then you can safely read from BW.
Regards
Pravin

User Id long field not displayed in communication infotype overview screen

System: SAP 4.7
After HRSP upgrade, in communication infotype overview screen (Program MP010500 and Screen 3000), the user id long field (technical field USRID_LONG) is not displayed for email subtype 0010 and CELL.
For subtype 0001, the field (USRID) is still is visible.
Any help is appreciated.

Hi,
Please check OSS note 1561054.
Hope this helps.
Donnie

Ideas for Adding a Quick Print Button to VA01 Overview Screen

Problem Statement:
Our users would like a "quick print" button on the VA01/VA02 application toolbar that immediately spools the Order Confirmation output to the printer. Our users want to print the output on demand, i.e., they do not want the output to automatically be printed when the order is created because a printout is not always needed. We already have condition records created with Dispatch Time set to 3 - Send with application own transaction. However, it takes 7 or more clicks to print the output on demand by navigating the menu (Extras > Output > Edit...Further Data...etc.) and changing the Dispatch Time to 4 - Send immediately when saving. This is a big ergonomic issue and a time killer.
Although the number of clicks to print are less when printing the output from the VA02 initial screen (via menu Sales document > Issue Output To), this is not acceptable when creating new orders. Really need an on-demand, quick print button on the VA01 screen. As an aside, we have a totally custom transaction for preparing sales order data (shopping cart-like way of finding materials and entering required data) that then calls VA01 and fills in all of the information. When saving in VA01, the user is returned to our Z-transaction so asking the user to subsequently run VA02 to print is not practical.
Current Output Determination:
We have custom output type ZBS0 (copy of BS0). Condition records for print medium are set to Dispatch Time = 3.
Questions:
1. Searching these forums, it appears custom code (extension or user exit?) can be written to call RSNAST00, or something similar, to automatically send output having a Dispatch Time = 3. Where can I find more information on exactly how to do this?
2. Do transactions VA01 and VA02 (Overview screens) have extensions that allow a print button to be added to the application toolbar? We would want to call the custom printing code from the button to send the output.
Any feedback on how others have solved this problem would be greatly appreciated.
Warm Regards,
Rob
P.S. Using GuiXT is not an option for us.

HI
We had similar issues with printing packing list and picking list by the warehouse people.
We created a new ztransaction with input fields of delivery number, output type, number of copies and a check box for repeat output(in case if the output was already printed).
You can also create a new Z-transaction with input fields of Sales order number(mandatory field), output type (Default it with value of ZBS0), number of copies (default it with 1) and a check box. On executing the transaction You can provide a message if the output was already printed so that the user can select the check box to repeat the output and execute. You can also print multiple SO by giving a range value if required.
If you do not want the user to enter the new ztransaction every time, try providing a menu path to the new z-transaction from the existing z-transaction which you are using for order entry.
Hope this helps you.
Thanks,
Arun.S

Ideas for Adding a "One Click" Print Button to VA01 Overview Screen

I am not an ABAP developer and am doing some preliminary functional investigation to determine the best way to add a simple "one-click" button that allows a Sales Order Confirmation output to be sent to the printer.
Can someone that really knows, tell me whether or not a custom menu item can be added to VA01 and VA02?
I have seen lots of threads telling folks how to find user exits and menu exits for a program so I don't need that advice. Rather, looking for someone who has already investigated this for VA01 and VA02 and knows the answer.
Problem Statement:
Our users would like a "quick print" button on the VA01/VA02 application toolbar that immediately spools the Order Confirmation output to the printer. Our users want to print the output on demand, i.e., they do not want the output to automatically be printed when the order is created because a printout is not always needed. We already have condition records created with Dispatch Time set to 3 - Send with application own transaction. However, it takes 7 or more clicks to print the output on demand by navigating the menu (Extras > Output > Edit...Further Data...etc.) and changing the Dispatch Time to 4 - Send immediately when saving. This is a big ergonomic issue and a time killer.
Although the number of clicks to print are less when printing the output from the VA02 initial screen (via menu Sales document > Issue Output To), this is not acceptable when creating new orders. Really need an on-demand, "one click" quick print button on the VA01 screen. As an aside, we have a totally custom transaction for preparing sales order data (shopping cart-like way of finding materials and entering required data) that then calls VA01 and fills in all of the information. When saving in VA01, the user is returned to our Z-transaction so asking the user to subsequently run VA02 to print is not practical.
Current Output Determination:
We have custom output type ZBS0 (copy of BS0). Condition records for print medium are set to Dispatch Time = 3.
Ideal Solution:
Add a Print Icon to the application toolbar as described above. From the button, write custom code that calls RSNAST00 (or is there a better way?) to send the output to the printer.
Any feedback on how others have solved this problem would be greatly appreciated.
Rob

Still looking for input from anyone that has had experience trying to add a menu item or toolbar button to VA01. In our case, for sending output.
Madhu,
Please again read my Problem Statement in my original posting for the business requirement. We are using ECC 6.0. Yes, I know that transaction VA02 has Sales Document > "Issue Output To" that allows you to print. However, we want to be able to print from the VA01 Overview screen after all of the sales order information has been entered. We would like to be able to click a print button which would save the new sales order and immediately issue the output. Again, we do not want the output to automatically print for every new sales order - we want to be able to print only when needed. The conditions that a sales person would use to decide to print a copy are too numerous or varied so they cannot be automated in a condition record. Of course we do use condition records for creating the output but we do not send immediately on save.
When creating a sales order, the sales person does not want to do the extra clicks and key strokes to then navigate or open a new VA02 session to print from the VA02 initial screen. And as described in my original posting, it is a lot of clicks navigate the VA01 Extras > Output menu to change the output to print on save.
If you observe the "day in the life" of a sales person and see all of the key strokes and clicking required to create an ECC 6.0 sales order, you understand why the extra 7 to 11 clicks to just print an output is very annoying. We have created a totally custom Z-transaction that allows our sales folks to capture everything need for a new sales order all on one screen with no tab views. We then launch VA01 to fill in all of the data entered in our custom transaction. This all works very well and is a huge time saver for our sales staff. Now we are looking to save a few more clicks by simplifying the printing.

Apples update didn't work for me: Boot Camp: iMac displays a black screen during installation of Windows 7

Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple Support
I have followed each of the steps listed in the link above with no success.
Prior to adding the extra drivers I was able to start the Windows install process up to reformatting the "Windows" Bootcamp drive. After that the computer would go through some instal processes and eventually restart. After the restart the screen would go black. The black screen lead me to the Apple Support link above dated March 5 2015. After going through steps listed in the link above, I get an error message stating that the D:\Sources\instal.win. file cannot be located. I am forced to restart the computer at that point and theWindows install process attempts to start again but always ends up at the same point.
Note: I am installing windows 7 Pro from a DVD. I scanned the AutoUnattend.xml file and noticed that it refers to "Windows 7 ULTIMATE" but not "Pro" or any others that I could see. (see below). Could that be part of the issue?
Any feedback would be greatly appreciated.
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
iMac (27-inch, Late 2009)
2.66 GHz Intel Core i5
16 GB 1067 MHz DDR3
ATI Radeon HD 4850 512 MB

Here is an over-simplified explanation of WIM and CLG files. Assume your DVD Media contains
W7- Ultimate
W7- Professional
W7- Home Premium
W7- Home Basic
WIM Files
File1
y
y
y
y
File2
y
y
y
y
File3
y
File4
y
y
File4
y
y
y
The File .wim will contains a compressed image which contains File [1...5].
The W7-Ultimate .clg will have 5 entries, with all set to 'Y'.
The W7-Professional .clg will have 5 entries, with 'Y','Y','N','Y','Y'.
The W7-Home Premium .clg will have 5 entries, with 'Y','Y','N','N','Y'.
The W7-Home Basic .clg file will have 5 entries, with 'Y','Y','N','N','N'.
This allows a single .wim Image file on the DVD media to be used to install any of the 5 flavors of Windows. When you enter your product key, the Installer knows what specific W7 variant you have the key for and will tell the WIM to extract the specific files the installer needs to be extracted.
The following line
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 ULTIMATE" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
is telling that a retail product key will be entered, which should go look for this specific .clg file (from the five you already have on disk). You can test if it will work for you by changing this line to the following
<cpi:offlineImage cpi:source="wim:d:/sources/install.wim#Windows 7 PROFESSIONAL" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
If it does not work, the other issue can be related to device discovery. Typically A: and B: device names are reserved for Floppy Drives. C: is your internal HDD.
D: can either point to the Optical drive, or the USB. The normal convention is that the removable media is named from Z: backwards. Y: and Z: are usually used for Network drives, so X: should be your USB. First try with the change to "Professional". If it does not work,

HT1338 Since having my Macbook Pro attached to a large display screen, everything is too large for the screen. Is there a cure please?

Today I had my Mac linked to a projector screen, and since disconnection evrything from the desk top onwards has been too large for the screen. Before that evrything was perfect. I have tried zoom buttons etc, but nothing seems to work. Any help gratefully rceived.

So it's not the Zoom feature? Open System Preferences Universal Access pane Seeing tab. Make sure Zoom is turned OFF.
If it's not that, then you may have the resolution set so that it is not optimal for the built-in display. Open System Preferences Displays pane Display tab. The optimal resolution is usually the one at the top of the list of choices.

Trouble with mobile site. Displays for a second then screen goes black.

Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/

I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt

Characteristics Display for Overview Screen

Similar Messages

Maybe you are looking for