Characters missing in output file?

Hi all,
In the below code I am not able to see the characters from 500 onwards in output file. What might be the reaon?
PARAMETERS:P_OUTPUT type rsfillst-dirname
DEFAULT TEXT-001 lower case.
data:vtext(900) type c.
start-of-selection.
vtext+0(5) = 'abcde'.
vtext+100(5) = '1bcde'.
vtext+200(5) = '2bcde'.
vtext+300(5) = '3bcde'.
vtext+400(5) = '4bcde'.
vtext+700(5) = '7bcde'.
vtext+895(5) = '9bcde'.
OPEN DATASET P_OUTPUT FOR OUTPUT in text mode encoding default.
TRANSFER vtext TO P_OUTPUT.
CLOSE DATASET P_OUTPUT.
IF SY-SUBRC = 0.
WRITE:/ 'ok'.
ELSE.
WRITE:/ 'FAIL'.
ENDIF.
I can see only characters till '4bcde' in output file.
Please help.
Thanks,
Subba

Hi,
You can view upto 512 character in the output.
Check out the PROGRAM statement of Program PROGRAM rswatch0 (Transaction AL11).
PROGRAM rswatch0 MESSAGE-ID s1 NO STANDARD PAGE HEADING LINE-SIZE 512.
Thats the reason why u can see more that 512 characters.
You can download the data to ur internal table and check that data is still there.
Reward points if helpful.

Similar Messages

Receiver SFTP adapter giving spaces between characters in the Output file

Hi PI Experts,
My Scenario is: Paymul (EDI file ) ECC -> PI -> SFTP server.
Source Sender File adapter able to pickup this Paymul D96A file and able to send messages to target SFTP server using SFTP receiver adapter.
But, Generated Output file having single space between each character. I am not using any content conversion modules in Receiver SFTP adapter.
Also not having any mappings to transform the messages. it is just pass through interface.
I have attached example Output file. I have changed the .Dat file to .txt just to attach here.
Could any one try to help me on this. Please let me know incase need any more details.
Thanks,
Govindu.

Hi Govindu,
Please see if the below Endcoding settings wont resolve your issue.
File Type - Text
File Encoding - ISO-8859-1
Regards,
Jannus Botha

Bad Characters writing an output file from CISCO router

Hi,
I'm making a backup of an accessrouter using telnet. I want to create a log file,so I redirect the stdout to a file this way:
System.setOut(new PrintStream(new BufferedOutputStream(new FileOutputStream("c:\\Maint\\Operator\\accounting\\accounting.txt")),true,"US-ASCII"));
When I use the monitor as stdout there are no problems, but when I do the redirection, some extrange characters appear in the log file:
AccessRouter#
copy system:running-config tftp://10.1.3.34/Maint/Operator/Backu$:running-config tftp://10.1.3.34/Maint/Operator/Backup /tempo/Baonfig tftp://10.1.3.34/Maint/Operator/Backup/tempo/Bac kup/BBDDa://10.1.3.34/Maint/Operator/Backup/tempo/Backup/BBDDan dEquip/1334/Maint/Operator/Backup/tempo/Backup/BBDDandEquip/13_
I don't know where's the problem,
Please help !
Thank you in advance. Best Regards.

What are you using to view the file? What happens if you use the default encoding instead of US-ASCII? It looks to me like either the application you are using to view the file can't interpret those characters or there are characters in the stream that don't convert well to US-ASCII.

Payment details are missing in the file generated by driver program RFFOJP_T

Hello Friends – We send the payment files generated by driver program RFFOJP_T (Payment Medium Japan - Domestic DME (and Bank Charges)). Now, we see issue that couple of payment details are missing in Output file/AL11.
If 20 payment documents are created in F110, only few are shown in AL11/Output file.
Can you pls give me a little idea on how to analyze this issue.
Thanks

Hello Friends - Can you please give me a little idea on what could be the reason for the below issue.
We are using the program RFFOJP_T and when payment file is generated, some of the payment details are missing.
I have executed payment run for 5 payments and only one 1 has come to the file and below 4 are missing.
The following payment documents/payment orders were not updated
(Result of the payment document update)
    CoCd Payment document/Payment order
    9770 1400001524
    9770 1400001525
    9770 1400001526
    9770 1400001527
The accompanying payment media have not been generated
>
> Overview of the files generated (DME)
> Name / File name
Thanks

Output File : German Characters are not coming

Hi All,
In my output file german characters are not showing. All the german Symbols are coming as '?'.
Is there any way to get that?
Regards,
Sridhar

Hi,
Change the encoding in your File adapter to <b>ISO-8859-1</b>
In the receiver file adapter --> File Encoding.
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
Regards,
Bhavesh

Japanies characters are converting to # in output file in open dataset

Hi Experts,
I am trying to transfer data from my internal table to application server. When i use
Open Dataset e_file for output in text mode encoding NON-UNICODE ignoring convertion errors.
All Japanies and chines characters(double byte characters) are converting to "#" in output file. I have used set locale language commend also.Still same problem is there.
Could you please any one help me on this.
Thanks
Srinivas

hi
problem exporting text in hebrew
Similar kind of problem has been solved here.. check that link first
Use the class CL_ABAP_CONV_OUT_CE and use it to convert file from unicode to ascii.
After that you should call OPEN DATASET IN LEGACY MODE and write the file.
you have to find the Code Page format for japanese here..
Is your system Unicode enables, if not please check whether you have japanese installed on your system.
Run the program RSCINST in SE38 which throws a pop up if u work on a Unicode system and also shows what are the language packs currently installed on ur system.... if u dont have Japanese installed then u need to contact Basis People for installion of that language pack

Junk Characters in the output XML file after Parsing

Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM

Wierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
     public static void main(String[] args) throws Exception {
          String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
                              "<test>\r\n" +
                              "</test>";
          System.out.println("Input:");
          lookForCR(input);
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
          Source source = new DOMSource(doc);
          ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
          Result result = new StreamResult( new StripOutputStream( bArrOut ) );
          Transformer xformer = TransformerFactory.newInstance().newTransformer();
          xformer.transform(source, result);
          System.out.println("\nResult:");
          lookForCR(bArrOut.toString());
          System.out.println("\nDone");
     public static void lookForCR(String input) throws Exception {
          char[] chars =input.toCharArray();
          for ( char chr : chars ) {
               if (chr == 13 ) {
                    System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
     OutputStream out = null;
     public StripOutputStream(OutputStream out) {
          this.out = out;
     @Override
     public void write(int b) throws IOException {
          if ( b != 13 )
               out.write(b);
}- Roy

Chinese Characters in output file

Hi All,
We have recently made our SAP Unicode compliant. Now user started entering customer name in Chinese language. We have program to extract customer name.
If I use following, then output file contains hash (#)
OPEN DATASET file_name FOR OUTPUT IN TEXT MODE ENCODING NON-UNICODE MESSAGE l_message IGNORING CONVERSION ERRORS.
If I use following, then output file shows Chinese character but record alignment gets disturbed.
OPEN DATASET file_name FOR OUTPUT IN TEXT MODE ENCODING DEFAULT
MESSAGE l_message IGNORING CONVERSION ERRORS.
Thanks
We are flexible to open file in both mode

Hi,
Refer it may useful for you.
https://forums.sdn.sap.com/click.jspa?searchID=4155531&messageID=2916685
https://forums.sdn.sap.com/click.jspa?searchID=4155593&messageID=2530886
Regards

DMEE Output File missing records

I'm trying to create a flat file to send payment information to the Bank. I create a format tree that correspond to the Bank Layout using DMEE1 tcode. The request is create a flat file in which only detail records are stored (no headers are needed). After I configure all the payment stuff and run the payment program, the output file only contains one record. My testing scenario include two invoices pointing to a different vendors which are ready to be paid, the file should have two records.
In addition, the idea is to create an Output file based on the CoCde field (separate files). Could you please help on this issue.

HI Cristobal:
Verifying the file I noticed that It has one record including to payment documents. Instead of that I need to records one per payment document. I tried with both options that you mentioned, but both of them creates one record with the two payments documents.
Could you please let me know what I'm doing wrong?
Regards...

DW CC erasing code; strange characters; missing file.

HEllo, an user in the French forums experiences several issues since the last update (I asked him to give the exact version)
DW erases parts of the code; gives error messages about a missing welcome.js file ; adds underlined < character. more info (thanks to the translate button in: http://forums.adobe.com/thread/1354156?tstart=0

Try turning off dictation and speech.
Try creating a new Mac user account.
Nancy O.

No output file on custom Invoice Report

Hi,
I have made custom reports using Reports/XMLP for PO, Consolidated Invoice and Invoice. PO and Consolidated Invoice are running fine, my problem is with Standard Invoice.
I made a modification to the datamodel of the standard report (RAXINV.rdf), creating a new report with the modified data
(RAXINV_FAR.rdf). After uploading the report and creating the request, I
followed all the steps that appear in the XMLP User Guide (Generate & register
data definition, design and register the layout rdf model). After running the concurrent program It ends with no errors, but when I try to fetch the Output. Under View->Requests->Find->View
Output, I get the error message: "Unable to find published output for this
request" and after clicking 'OK' I get "No output file exists for request
XXXXXX".
The funny thing is that if I run the Concurrent "XML Report Publisher" I can retrieve the missing Output.
Is there a patch/workaround to get the output without running "XML Report Publisher"?
I´m on EBS 11.5.10.2 and the XMLP version is 5.0.0

Stupid case of RTFM -- as I'd changed the mapping (as per other post) to include the ITEM as the higher level node this is the parameeter I need in the recordset
so when recordset parameter is changed to item the other parameters rmaining the same)
the file works fine
Output text file
1000001|One-time ship-to|ONE-TIME
1000005|ddfask|;LK;L
1000010|One Time Customer Test|SADFIWQEFG
I've given you the points in any case --although I solved the problem before I saw your post you put me on to the correct track from my other related post where I was missing the higher level node in the data and message mappings
Cheers
and thanks
Jimbo

** The XML output file is unreadable in SAP ECC 6.0 (Working fine in 4.6c)

Hi Friends,
I am working in SAP Technical upgrade Project from 4.6C to SAP ECC 6.0. In 4.6c one Z program is there, the output of Z program is to generate output XML file in the application Server. We checked and downloaded that the output file is readable and the XML is valid.
When we run the same program in ECC 6.0. (after unicode check & changes done), the output xml file is generated and it is in unreadable form. (XML contains some machine characters). When we open the XML in Altova Spy, it shows the error XML is invalid. The erorr is 'character #x3F3C is grammatically unexpected'.
In 4.6c, they used the encoding <?xml version="1.0" encoding="ISO-8859-1" ?> . We changed the encoding to UTF-8 in ECC 6.0 since we are doing unicode conversion. (
<?xml version="1.0" encoding="UTF-8" ?> ). After this change also, the output file is not generated correctly. It is unreadable form. (Some Machine Characters).
Friends, What could be the problem ? . Can you help me to identify this problem.
Kind regards,
Jegathees P.

I troubleshooted that, the reason is that conversion of X to C (Hexadecimal to C) in the ASSIGN statement is not working correctly in ECC 6.0. Then, we replaced the code with our custom Function Module to convert xstring to string. After this, we got the XML correctly, readable and well-formed XML.

EDIFECS Mapping not found in the X12 Output file in Oracle B2B 11g

Hi,
We are using Oracle SOA suite 11g, we have created a outbound process for EDI 855 which is PO Acknowledgement.
We are using a XML Gateway for the outbound and consuming the message in BPEL. We are mapping the OAG xml to EDIFECS xml to be consumed by Oracle B2B. We had created the EDIFECS xsd and ecs file using Oracle B2B editor and got it validated.
Now the issue is we have mapped few elements in BPEL and the same data is found in the payload message in Oracle B2B, but we are unable to see the data in the X12 output file.
Any thoughts will be hightly appreciated.
Thanks
Sathish

Hi,
Thanks for your update.
The following were the elements missing in the native X12 flat file. I verified these elements present in ecs using oracle b2b document editor.
<ns0:Segment-PO1>
<ns0:Element-355>EA</ns0:Element-355>
<ns0:Element-235>UI</ns0:Element-235>
<ns0:Element-234>UPCXREF</ns0:Element-234>
</ns0:Segment-PO1>
<ns0:Segment-ACK>
<ns0:Element-355 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="">EA</ns0:Element-355>
<ns0:Element-373>20100318</ns0:Element-373>
</ns0:Segment-ACK>
Thanks
Sathish

Junk Characters in the Output of Reports2.5

I have created Report in Reports2.5 which is giving good output display
But when I Register the Report in Oracle Apps & see output
it shows Junk Characters in the place of Labels
e.g. Revenue Report
will come like sg0Revenue o7Report
Can any-one give me the solution for this
Regards / Shailesh ( [email protected] )

This is probably due to the prt file that's being used to format the output. I'm willing to bet that the headings are in bold, and the prt file being used has includes some control characters to tell the printer to switch on and off bold - when you view the output file those are the characters you're seeing.
To switch this off simply remove the control characters from the prt file being used.
Hope this helps,
Danny

Getting junk data in the output file in UNIX server due to UNICODE error.

Hi All,
I am working on an Upgradation project from 4.7 to mySAP ERP 2005.
IN 4.7 we are using
OPEN DATASET lv_filename FOR OUTPUT IN   BINARY MODE. and getting the file as required.
In ECC 6.0 for the same OPEN DATASET statement ,the output file in unix server has the junk data having the characters like #<##d9{y#+G9###T>j(##^# #K## #q### #####.
Pls help me in this issue to proceed further .
Thanks,
Chakradhar.

Hi Markus,
Below are the files data in both environments.
In ECC 6.0
001B2274001802007051                                 0 20070519CTLMEA      RPTIME00043900 #
###9##;c_5####Tj#y#.##'###u###<#<##d9{y#+##G9###T>j(###^###K####q##########C##dA4####ձ###x##
R[#!#J##ڢw###u#-C#'Qho#箐}j##w%##/#'ZhW##s###nи#ڻ>-J#####Ж#tP}##Hu#}Q7###Sh_###C4<3nqk##i l#
####{############Qns###;####p##{si##y##@##ϰ0####C###,###2ύ#j̾########Q#f####;)k>lO#5#n###ܼ#
####M##S##IM#z0#o##ԭ####!#V#9###ں#?s##[#####V&#˴s#&#56196;&#56590;[#l#s##뷢:#Զ{Ȥ&#55960;&#57086;M-##v@#########v#߲###s##
9Q##!#d#####`#############Lc####J#######%?######E#HV3#(#N####Wl####}S#O######zA[##m####u/7#T
##2#s##Q#umF]##Z###}##݂###a######z1#`#####됞-###Q#o#####Q###x#######7Z[##?#V#e##nI####O1=u[#
##p##Kj#####]#####/5#20{####Ӝ##x##A#?###xa##/<^#Rj䅥#######xI#+j#%###$##$######p=##V#Ԋ
#######k#K##yI#yI#!/)#y#z##-y######"/#eڵ##/############*###"/_##-##+##/#y9#####5#9/#yI#A#
###################J/yih=####u4i#K##t####ܞ######=##AX###J##z#####KC믔## /###G{#K#####
In 4.7
001B2274001802007051                                 0 20070519CTLMEA      RPTIME00043900
ãÔ?®zåÖ#Iï-_Î-ør7##*Ódöã ²äÐÁSjòä`ëÏ©"yÿï¾E#[µºEW#g#2éu##a±¸u~#ZäTéR¯F&o#C·¼åÈÝÁ%½ß´y6+##¿
íE#z!#â#ùG#>{#éJæ##jÅSM<±òxwÆüI¾jâ#µ#ù
íQ ÕÈ###dÝ#/«#ycãA¼#ø#7#¿#¼#íxãý#y«#o#â¡ùéËÖ_C¼½À4ðÀó#Ð8?qÊ#O½Î¿_##b#xjÛÓ#OÜ#×gÌ#×ós##
í¡ùh¿~ëÊÓü#ò#'¡#Á#â©#<áoú#'Ô®ü#»L»þ#y)hà#ç#Z[¡#'®Uy1?YC<Ýú#iÇÇ###Íç'Ô#§#Ù#O§#f<###B{#§##ñ
#0H}¬#^##6¨7V¨7VÚX#M9&#A#øG º'õxOù§ø #W¨Å+Ðb#ÉÇ7#SôRXß\u00A7à#wE"#mê#óÀd# ¼##gn###:ô#E<#######ú
ûJ¦H}#·¦Y½â>ºbò#xSSÿÿÕ«óG#ï#6²f´Ú¾fyqèhJÖçCOr´#Ý#S?##KËÄ×mâë¶x)º×ªh2Åw8&í####7 `Ùo#ö»#òöw$
½##Gê#ì#»#La)ì##Ý÷#{7í´éã»##ãî]¾[##{O#¾C##£¶G#û¼Eû#dL#ª:#PÉEÉ>Ó##ª:G#éaR^·BEµÏ+¹###y#N##È±
DÕ##5#"9Ní>#íFo##kp#ÂðÆè5¿ð½F®¯M##þð1#îi##Z #Z #Z#ô-¾#§èH»û¹ö9é#Ôä#001B2274001802007051
èÁ##<(#ÿ#¢²ÿ#è#éc#z¾vçÌá#¹#ý#x%ìÜ#çÌ##ùÍÙ#¹{Ç¯epmâí#¸Ö##¸=ÝÙ½¹uë·,ù#þ¼øl###£åg#,##-`q#ÿøæï
viÁ#]3#.O#þÊöèR##=##L#LÊk###¤à##ó#'V052 øé]+####ã!ÁC#s#q###åLj##Á¯Æ4#.àíT#¸Þ¹µ·¶É)ç#Ïå#<#/ð
Thanks,
Chakradhar.

Characters missing in output file?

Similar Messages

Maybe you are looking for