ChaRM: Incorrect message "request has already been released"

Hello experts!
I have a fresh working ChaRM implementation and facing an error that SOMETIMES happens. ChaRM cannot release a transport request, with all tasks released, and an error message is shown in SCMA:
"Transport request DLDK959614 can no longer be changed
Message no. /TMWFLOW/TRANSPORT_N643
Diagnosis
The request DLDK959614 has already been released.
System Response
The system does not allow you to create a transport of copies.
Procedure
It is not usually necessary to create a transport of copies for a request that has already been released. Perhaps you entered an incorrect request, in which case you have to enter a different one."
In fact the transport request IS NOT REALESED. The workaround I am using is to momentarily allow the "manual" release via SE09. And then I follow the normal process until reach the production environment.
I could not find anything wrong with those transport orders. The only fact that made me think a while is that a new task list was created.
Does anyone have a clue?
Thanks!

HI Jose,
DO you have solution for this issue, I am getting same error
Dinesh

Similar Messages

ODM Client Error: Error Message: Attribute has already been added

I'm getting the following error message in the ODM client (I've substituted an elipsis for the attribute name below.)
Error Message: Attribute ... has already been added to LogicalDataSpecification.
Exception type: oracle.dmt.odm.InvalidArgumentException: Attribute ... has already been added to LogicalDataSpecification.
Stack trace:
oracle.dmt.odm.InvalidArgumentException: Attribute ... has already been added to LogicalDataSpecification.
at oracle.dmt.odm.data.LogicalDataSpecification.addAttribute(LogicalDataSpecification.java:251)
at oracle.dmt.dm4j.wizard.director.minings.ModelBuildBuilder.buildLogicalDataSpecification(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.RegressionModelBuildBuilder.createFunctionSettings(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.ModelBuildBuilder.getMiningTask(Unknown Source)
at oracle.dmt.dm4j.wizard.director.minings.MiningBuilder.run(Unknown Source)
at oracle.dmt.dm4j.browser.ProgressBar.run(Unknown Source)
at java.lang.Thread.run(Thread.java:534)
Anyone have any ideas what is causing this?
-- Joseph

OK, I figured out what happened. I was using the multi-case format. I had two attributes with similar names, on in all caps, and one in mixed case... attribute names are not case sensitive, so the algorithms became confused.
If anyone from Oracle is monitoring this forum, I would suggest adding a note to the documentation noting that the algorithms are not case sensitive, so you should make sure that your attribute names are all unique per observation.

Send a request to a conversation that has already been finished

This error continually occurs. Any idea why?
 An attempt was made to send a request to conversation id []:169.254.17.244-b61346.100533c48f4.-7fea-gend.
 This is not a valid conversation id. The most common cause of this exception is an attempt to send a request to a conversation that has already been finished.
 Work around is to restart WLS and maybe this time it will not happen. WLS 8.1SP3.
 From: [email protected] ([email protected])
 Subject: Weblogic Tutorial Question - Need help
 This is the only article in this thread
 View: Original Format
 Newsgroups: weblogic.developer.interest.jms
 Date: 2004-09-17 09:12:33 PST
 Hi guys,
 I'm a Weblogic newbie. I have started working with Weblogic Workshop's
 Tutorial. I find them interesting and easy to follow. All was going
 well until I reached the Step 4 (Add a JMS Control). The url to this
 page is:
 http://edocs.bea.com/workshop/docs81/doc/en/workshop/reference/navResources.html
 After completing this tutorial to the end I get all the results
 mentioned, but I get additional error messages like these in my
 InvestigateTest.jws Web Service client:
 1095373714829
 investigate:creditScoreJMS:listener.onMessage
 External Service Callback investigate:creditScoreJMS:listener.onMessage
 Submitted at Friday, September 17, 2004 10:25:52 AM EDT
 Executable Request:Callback.onMessage
 ConversationNotFound Exception
 Submitted at Friday, September 17, 2004 10:25:52 AM EDT
 An attempt was made to send a request to conversation id 1095373714829.
 This is not a valid conversation id. The most common cause of this
 exception is an attempt to send a request to a conversation that has
 already been finished.
 Request Cancelled
 Submitted at Friday, September 17, 2004 10:25:52 AM EDT
 Processing Request
 Submitted at Friday, September 17, 2004 10:25:53 AM EDT
 Request Complete
 Submitted at Friday, September 17, 2004 10:25:53 AM EDT
 I cannot figure out why I'm getting these. I'm doing everything as
 described in the Tutorial. Can somebody tell me what I'm doing wrong.
 I would greatly appreciate.
 Thanks.
 Adnan

hi
 We just encountered this problem while load testing using JMeter. While it may not be the same scenario, we have found that we can consistently trigger this error if:
 a) multiple threads from the same client are invoking the service (i.e. a JMeter using JavaSamplerClient can do this)
 b) the web service is conversational according to the polling design pattern recommended in the WLW doco: i.e.
 startQuery()(one-way) conversation phase = start
 checkQueryStatus() conversation phase = continue
 fetchQueryResponse()conversation phase = finish
 c) buffering is enabled for the startQuery() operation.
 d) the number of threads > 3 (might occur very infrequently <= 3 - cant remember)
 This is reproducable in our WLS/WLW 8.1 SP2/SP3 environment.
 With buffering enabled - errors occur
 With buffering not enabled - no errors
 On reflection, buffering isn't really needed for our usage so we removed it, however the errors might indicate a bug or unsupported use case
 Regards
 Jim Nicolson

HT204266 I have a balance on my iTunes gift card but when I try to redeem it, the message says the code has already been used and won't let me go on

I have a balance on my gift card but can't redeem it. When I enter the requested code the message says it has already been used. How do I redeem the amount left on my card?

Hi Rosemarie316,
If you are having issues redeeming your gift card, the following article will help:
iTunes Store: Invalid, inactive, or illegible codes
If you're still unable to redeem your code after verifying the characters in the code, you'll need to contact iTunes Store Support for help. You'll need to provide a digital image of the front and back of the gift card as well as the sales receipt for the purchase of the gift card.
Contacting iTunes Store Support
Go to the iTunes support page and select your iTunes country.
From the iTunes support page, choose Contact Support on the lower-left side of the page.
Follow the instructions to get iTunes Store support assistance.
I hope this information helps ....
Have a great day!
- Judy

Error message: Fulfill:2004 This license has already been fulfilled by another user. I need to read on 3 devices. I could until I upgraded from 4S to 6 plus. Can you help

I just upgraded my iPhone 4S to a 6Plus. I also have an iPad2 and an iPad Mini. I read on all 3 devices depending on where I'm going at the time. In my OverDrive settings on my iPad/Mini it says it is authorized by Adobe ID <and my email address>. On the 6Plus settings it says it is authorized by OverDrive account <and my email address>. How do I get the Adobe ID authorized on my 6Plus. Please??? and Thank you.
Ellen

I'm sorry I gave the impression I thought Overdrive was an Adobe product. I know it is not. The problem I am having IS with the Adobe product and the message I receive concerning "This license has already been fulfilled....." appears to be the result of the Adobe product. I had Googled Adobe Digital and discovered what I felt were conflicting or at least ambiquus statement including: http://http://forums.adobe.com/thread/1232101.
Anyone else have any thoughts? I DID send a help request to Overdrive but have not yet heard back from them.

Reverse PO Release strategies - "Document has already been outputted"

Hi SAP Expert
need your help to solve this issues. I'm trying to reverse back the PO release strategies in order for me to change the GL code, when i click on the reverse indicator the system tell me that "Document has already been outputted". what does this message mean and how do i resolve it ?

Dear Nikamz,
It means that the PO is already been outputed , you can to ME23N--> messages button.
Also In the PO release strategy--> release indicator, we can set if the PO with such release indicator is release for transmission.Suppose you can still change the PO. Also check to user exit for your PO transaction.What is the Changeable value in your release indicator?
Regards,
w1n

How do you search through configured Alternate Extensions to correct error message : The phone number or extension has already been assigned to some other object.

When configuring a new Unity Voicemail Account I receive this message : The phone number or extension has already been assigned to some other object. I understand that this means that the 10 digit number I am trying to configure as the alternate extension for this user is already configured for another object with Unity.
I need to search by the 10 digit number and determine where it is configured so I can change it and map to the correct end user.
I have attempted to to search Users via DTMF Access ID using the 10 digit number with nothing being returned via that search.
How do I Search all of the copnfigured Alternate Extensions within our Unity Server?

A subscriber info dump is likely the fastest way. If you're curious regarding other methods, you can also use the Data Link Explorer (CUDLE) tool which is in the Cisco Unity Tools Depot. All extensions for all objects are referenced in the "DTMFAccessId" table. The View menu has a Query Builder which you can use to compile a SQL query that searches for a digit string. It's best to search for both the 10 digit string as well as an abbreviated string as Unity sees them essentially the same and they are usually should be associated with a single subscriber. Once you find a match, you can use the "ParentObjectId" value associated with the DTMF access ID to look for a matching owner in the "GlobalSubscriber" table. The ParentObjectId should match the SubscriberObjectId for a subscriber (assuming the DTMF access ID is assigned to a subscriber). This is the same thing as looking at SQL; however, you are not directly accessing the DB so this is generally considered the safest way to browse and get a feel for where things are.
Hailey

I am not able to copy Keynote and Numbers to iTunes from my phone. Message says that my Mac isn't authorized. When I authorized it, it said my Mac has already been authorized. Why??

I have purchased Keynote and Numbers via my iPhone recently with payment details different from the one I usually use. When I synced my phone with iTunes, a message popped out stating that my Mac isn't authorized and advised me to do so which I did and another message popped out informing me that my Mac has already been authorized. However, when I tried syncing again, the same former message popped out again. I have even disauthorized my computer and authorized it again but still get the same message.
What is wrong? And what can I do to rectify this?
Both have the latest iOS, by the way......

http://www.thexlab.com/faqs/trash.html
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

HT201269 Hi this was useful however the phone I want to transfer my messages isn't new, it has already been setted up. What do I do without having to set up my phone again?

How do I transfer data (messages) from old iphone to an iphons which has already been setted up?

The only method to restore SMS/iMessages is to restore from a backup. The backup contains the SMS/Messages. You cannot selectively restore from the backup, it is all or none.

HT1390 I can't transfer a rented movie from my iMac to my iPad. It get the following error message- the rental could not be transferred to the iPad because it has already been transferred to another computer or device. I have not transferred it to anywher

I can't transfer a rented movie from my iMac to my iPad. It get the following error message- the rental could not be transferred to the iPad because it has already been transferred to another computer or device. I have not transferred it to anywhere device.

Is the computer connected to the the internet?

Error Message: "One of the base documents has already been closed".

Hello everyone
I would appreciate very much if someone can help me. The following error message prompts up when trying to create a Credit Note BASED on a A/R Invoice: "One of the base documents has already been closed". it is necesssary to say that we are not changing anything in between the two documents.
We are running SAP Business One 2007A PL49.
Thanks very much
Claudia

Hi.
Please read this SAP Note: [854781 Error message "Invoice is already closed or blocked".|https://websmp230.sap-ag.de/sap(bD1lcyZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=S&note_numm=0001290054|Click here to view].
This issue could be related to decimal places in amounts.
This could be caussed by changing the decimal places for amounts, prices, etc. in General Settings.
Regards.

TS1389 Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer. This has already been done and I have tried the suggestions regarding authorisation. I can play the programs on my computer, but not the Apple TV.

Trying to play purchased TV series to my Apple TV, I am requested to authorise the computer. This has already been done and I have tried the suggestions regarding authorisation. I can play the programs on my computer, but not the Apple TV.
Any ideas?

in remote app click on the
lower left corner on the text
top of the context menu click devices
choose the appletv rather then your shared lib in the list
if you are trying to view a movie that is located on your ipad on your tv using the appletv then
you should use airplay mirror not the remote app

HT201209 I have tried to redeem a gift card but I get the message "the gift certificate or card you have entered has already been redeemed". I haven't redeemed it, please help.

Hi.
I recently bought a £15 ituens gift card for my partner. Since she is not too savvy with itunes, I went on to her account to redeem it for her. I scratched off the panel and entered the code into the correct box on itunes and was told "the gift certificate or card you have entered has already been redeemed".
I took the card back to Morrisons Supermarket in Guiseley where I had bought it and was told that since Morrisons only sell gift cards on behalf of iTunes and receive a commission, that they could do nothing and I had to take the problem up with iTunes.
Well, dealing with iTunes is no easy thing. I finally found what I thought was the right area on the website and was directed to send an email. I did this, but the chap I got through to seemed to think I had a problem with my iTunes software or that I didn't know how to redeem the card. I tried my best - over several emails - to get through to him that the problem was with the gift card code and that they may have been hacked. It would be very easy for them to find out that a) I wasn't the one who had redeemed the code and b) who the culprit was due to the fact they would know whose iTunes account the code had been credited to. I got nowhere, the chap sent me a link to "account security" and told me to phone them even though it was not possible to get a phone number from the link he sent me.
So, I got back in touch with Morrisons customer complaints and basicaaly told them that as far as I was concerned they were selling faulty goods on behalf of another company and that they should at least try and help me out with iTunes. I have since received an email from Morrisons asking for all the details of the card so they can look into it. iTunes - meanwhile - have stopped replying to my emails and I am now being completely ignored by them.
Has anyone else had this problem or does anyone know where I stand and how I can either get my money back or get the funds put on to my partners iTunes account?
Many thanks
Damian

Not likely you'll get a "history" but Apple should be able to resolve the problem.
You can report issues with your iTunes Store purchases directly through the iTunes Store:
http://support.apple.com/kb/HT1933

ERROR: getOutputStream() has already been called for this response

I am trying to export a pdf from a jsp page using the crystal report viewer. The jsp is deployed in a .war archive on JBoss 4.0.4. The PDF comes up fine, but each time I make the request I get the error listed below from the JBOSS console. Can anyone explain what is going wrong? How do I make thie message go away? 16:33:50,966 ERROR [[jsp]] Servlet.service() for servlet jsp threw exceptionjava.lang.IllegalStateException: getOutputStream() has already been called for this response at org.apache.catalina.connector.Response.getWriter(Response.java:599)at org.apache.catalina.connector.ResponseFacade.getWriter(ResponseFacade.java:195) at org.apache.jasper.runtime.JspWriterImpl.initOut(JspWriterImpl.java:124)at org.apache.jasper.runtime.JspWriterImpl.flushBuffer(JspWriterImpl.java:117) at org.apache.jasper.runtime.PageContextImpl.release(PageContextImpl.java:191)at org.apache.jasper.runtime.JspFactoryImpl.internalReleasePageContext(JspFactoryImpl.java:115) at org.apache.jasper.runtime.JspFactoryImpl.releasePageContext(JspFactoryImpl.java:75)at org.apache.jsp.rptFBATAG_002dviewer_jsp._jspService(rptFBATAG_002dviewer_jsp.java:164) at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314) at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)at javax.servlet.http.HttpServlet.service(HttpServlet.java:810) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173) at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:175) at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:74)at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869) at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527) at org.apache.tomcat.util.net.MasterSlaveWorkerThread.run(MasterSlaveWorkerThread.java:112)at java.lang.Thread.run(Thread.java:595)

Hi there, This issue is the same as the one in the following thread:<a href="/node/711">http://diamond.businessobjects.com/node/711</a> There are a few ideas in that thread to use as a work-around. Regards, Sean Johnson (CR4E Product Manager)

Crawl Error GetVirtualServerPolicyInternal - An item with the same key has already been added

Hi,
I did an index reset and now I can't start any crawl. It's complaining "An item with the same key has already been added". Exception seems to from Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal.
What should I check? Thanks.
The SharePoint item being crawled returned an error when requesting data from the web service. ( Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: 9e69ff9c-f925-50bf-5110-d1b0e74c77bc; SearchID = 522CB441-0028-4E7D-BED4-4230D7ADD14B
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dm1k Medium Exception Type: System.ArgumentException *** Message : An item with the same key has already been added. *** StackTrace:    at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean
add)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicyInternal(String strStsUrl, WssVersions serverVersion, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String&
strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL)     at Microsoft.Office.Server.Search.Internal.Protocols.SharePoint2006.CSTS3Helper.GetVirtualServerPolicy(String
strStsUrl, sPolicyUser[]& vUsers, sPolicyUser& anonymousUser, String& strVersion, String[]& vServerWFEs, Boolean& fIsHostHeader, Boolean... 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93* mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dm1k Medium ...& fIsAllUsersNT, Boolean& fIncludeSiteIdInCompactURL) 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
fsa0 Monitorable GetVirtualServerPolicy fail. error 2147755542, strStsUrl
http://serverurl 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvt6 High    SetSTSErrorInfo ErrorMessage = Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7 hr = 80042616 [sts3util.cxx:6988]
search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvi3 High    Couldn't retrieve server
http://serverurl policy, hr = 80042616 [sts3util.cxx:1865] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvu0 High    STS3::StoreCachedError: Object initialization failed. Message: "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7"
HR: 80042616 [sts3util.cxx:7083] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvg4 High    Server serverurl security initialization failed, hr = 80042616 error Message Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7
[sts3util.cxx:1591] search\native\gather\protocols\sts3\sts3util.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dv5x High    CSTS3Accessor::InitServer: Initialize STS Helper failed. Return error to caller, hr=80042616 [sts3acc.cxx:1932] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dv3t High    CSTS3Accessor::InitURLType fails, Url
http://serverurl, hr=80042616 [sts3acc.cxx:288] search\native\gather\protocols\sts3\sts3acc.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvb1 Medium CSTS3Accessor::Init fails, Url
http://serverurl, hr=80042616 [sts3handler.cxx:337] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Connectors:SharePoint
dvb2 Medium CSTS3Handler::CreateAccessorExD: Return error to caller, hr=80042616            [sts3handler.cxx:355] search\native\gather\protocols\sts3\sts3handler.cxx 7a91de3b-a271-43c3-9f1a-935558902623
04/22/2015 19:37:10.93 mssdmn.exe (0x1A34)                     0x225C SharePoint Server Search      Crawler:FilterDaemon
e4ye High    FLTRDMN: URL
http://serverurl Errorinfo is "Error from SharePoint site: *** An item with the same key has already been added., CorrelationID: ae5aff9c-2940-50bf-5110-da6764f258d7" [fltrsink.cxx:566] search\native\mssdmn\fltrsink.cxx
04/22/2015 19:37:10.93 mssearch.exe (0x1118)                   0x0628 SharePoint Server Search      Crawler:Gatherer Plugin
cd11 Warning The start address http://serverurl cannot be crawled. Context: Application 'Enterprise_Search_Service_Application', Catalog 'Portal_Content' Details: The SharePoint item being
crawled returned an error when requesting data from the web service.   (0x80042616)
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:10.99 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x06B4 Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. ab403221-f69c-43ef-a8cc-7df384f6a4b3
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 2bbbeea9-aeb8-4497-a774-2927bd21ba98
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.00 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x10E4 Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. e15da110-f86d-4e3d-8d73-a67dccaa82cd
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyfa Unexpected CCANameProjector : Exception:Exception : Access to the path 'C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl' is denied. encountered while attempting to
load the Projection Model Catalog C:\Program Files\Microsoft Office Servers\15.0\Data\Office Server\CanonicalResources\ProjectionModels\EN_EN.mdl for Language : en encountered while attempting to load the projection model. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyd9 Unexpected CCAMetadataProducer : Fuzzy metadata generation failed to load resource for language: en. 58d54385-497b-466d-9f02-aeba664bc1b6
04/22/2015 19:37:11.03 NodeRunnerContent1-84b5adb7-0d6 (0x2090) 0x240C Search                        Fuzzy Name Search
ajyed Monitorable CCAMetadataProducer : Fuzzy metadata generation failed for the current record. Check logs for more details. 58d54385-497b-466d-9f02-aeba664bc1b6

Hi,
For troubleshooting your issue, please take steps as below:
1. Try to crawl your content source using farm admin account.
2.
Disable loopback check .
3.Add reference  SPS3s://WEB into your content source start addresses.
For more information, please refer to these blogs:
http://sharepoint.stackexchange.com/questions/5215/crawling-fails-with-404-error-message-but-the-iis-log-tell-a-different-story
http://www.cleverworkarounds.com/2011/07/22/troubleshooting-sharepoint-people-search-101/
http://blogs.msdn.com/b/biyengar/archive/2009/10/27/psconfig-failure-with-error-an-item-with-the-same-key-has-already-been-added.aspx
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

ChaRM: Incorrect message "request has already been released"

Similar Messages

Maybe you are looking for