CHARM - Retrieve error messages

Hello,
For a new project, we want to import the CHARM documents automatically. But befor we can do this, we need to check the status. If everyting is ok, the import can start. But in some cases errors occurs eg: transport is not released, no import done, ... (at the right side, on top of the change document). Does anyone know how i can access these messages by a function module or on table ? So i can implement it in my program. I found already the message keys, but i can't link the error message with it. Thank you.
With kind regards,
Kurt Janssens

Hi Shaun,
The item that you mention works and is a big help when some errors in the change document aren't clear. But that isn't the item that I'm looking for. I just need to know in which table the errors are stored during the processing of the change document or via which function i can access them. Then i can determin which action my program need to process. But first i need to know which error occurred before i can go on.
Kurt

Similar Messages

How to retrieve error message(s) after failed web service call

Hi!
I tried to create an item using the web service ego_item_pub.process_item and it worked ok (version 12.1.1). Sending the same request again, I got an error which should be ok since the item id already exists. The thing is, that I only get an "E" as return status:
<X_RETURN_STATUS>E</X_RETURN_STATUS>
<X_MSG_COUNT>1</X_MSG_COUNT>
As described in the integration repository, there should be a parameter called msg_data which should contain the message if there is exactly 1 message, but I cannot find it.
So, I tried to get the message using fnd_message.get, but the response of my web service call is:
AuthorizationFailure : User not authorized to execute service. (I use sysadmin/sysadmin as ws security user).
I use the following grant details:
All Users Direct GLOBAL Revoke Action Enabled
SYSADMIN SYSADMIN Direct USER
What else can I do or how can I retrieve error messages for a failed web service call?
Thanks a lot,
Konrad

Hi Konrad,
As we've found out, search the Integration Repository for internal name ERROR_HANDLER and use that. Letting the general public know the answer for this one!
Regards,
Gareth
http://garethroberts.blogspot.com

Retrieving error messages from lpxus.msg

What methods must be invoked in order to retrieve the correct error codes.
Eg 202 means 'file not found'.
How would be retrieve this message from \mesg\lpxus.msg(using the C++ XML Parser)
There are no examples in the samples.
null

Hi,
This is explained in the readme and function documentation:
Currently, the only message file is in English although message files for
other languages may be supplied in future releases. You should set the
environment variable <tt>ORA_XML_MESG</tt> to point to the <b>absolute
path</b> of the <tt>mesg/</tt> subdirectory. Alternately, if you have an
<tt>$ORACLE_HOME</tt> installed, you may copy the contents of the
<tt>mesg/</tt> subdirectory to the <tt>$ORACLE_HOME/oracore/mesg directory</tt>.
The function documentation for xmlinit() explains the msghldr parameter that can
be used to process error messages (or they are printed to stderr if msghdlr not
supplied).
Thanks,
Oracle XML Team
null

Retrieve error message of SAP provided web service in web service response

Hi All,
We have a SAP provided web service that sometimes fails to process data it is called with. This is not a problem as the data sometimes is just plain wrong (i.e. date field contains text). However, the error is only logged in SAP and can only be queried using SRT_UTIL.
The problem is that the error is not reported back via the response. How can we set up the web service so that the error could be displayed by the calling party without logging into SAP?
Thanks for the help in advance.
Best Regards,
Daniel

Hi Calvin,
The WS is indeed synchronous. The problem is not whether the error is captured or not. It is captured indeed but it is logged inside SAP only and not returned via the Web Service response mechanism. The error message says that error message can be retrieved using SRT_UTIL.
This is a major problem as the users of the outside system calling SAP have no right to use SRT_UTIL to track down the error. They need to contact SAP basis in order to get to the end of it.
What we need to achieve is to get back the same error message that can be seen with SRT_UTIL via the web service.
Thanks.

FM for error messages

Could anyone tell me which Function Module is used to retrieve error messages in BDC? Code samples will be helpful.

Using function module 'FORMAT_MESSAGE' you can capture the messages.
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

How to retrieve only error message through report file

Hi,
When there is extract/replicat abended,we need to check complete report file to see the error message.
I would like to know is there parameter setting available ,so that we can retrieve only required error message.
For ex. Instead of complete error message to check in report file,i need to see below meesage only,starting from "source Context".
Source Context :
SourceModule : [er.main]
SourceID : [scratch/pradshar/view_storage/pradshar_bugdbrh40_12927937/oggcore/OpenSys/src/app/er/rep.c]
SourceFunction : [get_map_entry]
SourceLine : [9126]
ThreadBacktrace : [11] elements
: [ora/gg/install/replicat(CMessageContext::AddThreadContext()+0x26) [0x5f2ac6]]
: [ora/gg/install/replicat(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x7b2) [0x5e9562]]
: [ora/gg/install/replicat(_MSG_ERR_DB_CLAUSE_ERROR(CSourceContext*, char const*, CMessageFactory::MessageDisposition)+0x92) [0x5b1352]
: [ora/gg/install/replicat(get_map_entry(char*, int, __wc*, int)+0x1dd6) [0x4fcec6]]
: [ora/gg/install/replicat [0x5497e5]]
: [/ora/gg/install/replicat(WILDCARD_check_table(char const*, char const*, int, unsigned int*, int, unsigned int, DBString<777>*, int)+0
x16b) [0x54b08b]]
: [ora/gg/install/replicat(REP_find_source_file_wc(char const*, unsigned int, DBString<777>*, int)+0x350) [0x903d50]]
: [ora/gg/install/replicat [0x90bb0d]]
: [ora/gg/install/replicat(main+0x84b) [0x5081ab]]
: [lib64/libc.so.6(__libc_start_main+0xf4) [0x2b87d13469b4]]
: [ora/gg/install/replicat(__gxx_personality_v0+0x1da) [0x4e479a]]
2012-07-09 02:20:48 ERROR OGG-00919 Error in COLMAP clause.
--------------------------------------------------------------------------------------------------------------------------------------------------------

Nice..i think awk is better option.
Just one thing.awk command only displays part of the information instead of complete below information.
Ex: egrep -q ERROR dirrpt/PODS00C1.rpt && awk '/^Source Context/,/ERROR/ { print $0 }' dirrpt/PODS00C1.rpt
[22:00]goldengate]$ egrep -q ERROR dirrpt/PODS00C1.rpt && awk '/^Source Context/,/ERROR/ { print $0 }' dirrpt/PODS00C1.rpt
Source Context :
SourceModule : [ggdb.ora.sess]
SourceID : [scratch/pradshar/view_storage/pradshar_bugdbrh40_12927937/oggcore/OpenSys/src/gglib/ggdbora/ocisess.c]
SourceFunction : [OCISESS_try]
SourceLine : [500]
ThreadBacktrace : [12] elements
: [orashare/gg/navc1/extract(CMessageContext::AddThreadContext()+0x26) [0x6705e6]]
: [orashare/gg/navc1/extract(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x7b2) [0x667082]]
: [orashare/gg/navc1/extract(_MSG_ERR_ORACLE_OCI_ERROR_WITH_DESC(CSourceContext*, int, char const*, char const*, CMessageFactory::MessageDisposition)+0xa6) [0x61f2c6]]
Where as i would like to see complete information including ERROR details as mentioned below.Do you have any awk command for this?
Required below output:
Source Context :
SourceModule : [ggdb.ora.sess]
SourceID : [scratch/pradshar/view_storage/pradshar_bugdbrh40_12927937/oggcore/OpenSys/src/gglib/ggdbora/ocisess.c]
SourceFunction : [OCISESS_try]
SourceLine : [500]
ThreadBacktrace : [12] elements
: [orashare/gg/navc1/extract(CMessageContext::AddThreadContext()+0x26) [0x6705e6]]
: [orashare/gg/navc1/extract(CMessageFactory::CreateMessage(CSourceContext*, unsigned int, ...)+0x7b2) [0x667082]]
: [/orashare/gg/navc1/extract(_MSG_ERR_ORACLE_OCI_ERROR_WITH_DESC(CSourceContext*, int, char const*, char const*, CMessageFactory::MessageDisp
osition)+0xa6) [0x61f2c6]]
: [orashare/gg/navc1/extract(OCISESS_try(int, OCISESS_context_def*, char const*, ...)+0x353) [0x5a3d53]]
: [orashare/gg/navc1/extract(OCISESS_logon(OCISESS_context_def*, char const*, char const*, char const*, int, int, int)+0x89c) [0x5a596c]]
: [orashare/gg/navc1/extract(DBOCI_init_connection_logon(char const*, char const*, char const*, int, int, int, char*)+0x74) [0x5931a4]]
: [orashare/gg/navc1/extract [0x597918]]
: [orashare/gg/navc1/extract(gl_odbc_param(char const*, char const*, char*)+0x3b) [0x597f1b]]
: [orashare/gg/navc1/extract [0x520b96]]
: [orashare/gg/navc1/extract(main+0x1ce) [0x52726e]]
: [lib64/libc.so.6(__libc_start_main+0xf4) [0x2af768923994]]
: [orashare/gg/navc1/extract(__gxx_personality_v0+0x1ea) [0x4f3aba]]
2012-09-06 16:48:50 ERROR OGG-00664 OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
2012-09-06 16:48:50 ERROR OGG-01668 PROCESS ABENDING.

Error while extracting values from SOAP Body using XPath (Retrieve from Message filter)

Hi,
I am using 'Retrieve from Message' filter to extract element value from the following SOAP response envelope:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:math="http://example.com/math.xsd">
<soapenv:Header/>
<soapenv:Body>
<math:DivideResponse>
<iResult>10</iResult>
</math:DivideResponse>
</soapenv:Body>
</soapenv:Envelope>
I am using the XPath expression - /soapenv:Envelope/soapenv:Body/math:AddResponse/iResult
soapenv = http://example.com/math.xsd
math = http://schemas.xmlsoap.org/soap/envelope/
ERROR
4/19/15, 19:29:03.016
Empty attribute retrieved from message via XPath
ERROR
4/19/15, 19:29:03.016
The message [Id-59643455b76a00000000000045edd6a6] logged Failure at 04.19.2015 19:29:03,015 with log description: Failed to extract attributes via XPath
ERROR
4/19/15, 19:29:03.017
Retrieve math result from SOAP response
Could you please help me resolve it?
Thanks,
Aneesh.

Hi Aneesh,
XPath Expression: /soapenv:Envelope/soapenv:Body/math:DivideResponse/iResult
You are using AddResponse in your XPath there is no element named like that.
Cheers,
Stefan

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Repeated retrieval and parsing of XML file causes IE to display an error message

I have a flash application that makes a HTTP call every 120
seconds to retrieve a xml file. This file is being generated with
fresh data every few minutes or so and pushed to the apache web
root with a unix mv command.
I'm using the standard Flash XML object. The HTTP request is
NOT over SSL (I know there is a bug related to this). Here is the
code to make the retrieval:
xmlData = null;
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = xmlTraverse;
xmlData.load("
http://domain/dir/somefile.xml");
The "xmlTraverse" method was written by my team. There is no
known bug in the parsing logic.
Intermittently and unpredictably, IE will display the
following dialogue box:
"A script in this movie is causing Macromedia Flash Player 8
to run slowly. If it continues to run, your computer may become
unresponive. Do you want to abort the script?"
I originally leaned toward an infinite loop causing this
problem. The timeline jumps back and forth between two frames,
checking in the latter frame if the xml has been loaded and parsed
before allowing execution to move to the next frame. I hardcoded
the loop check to always be false, but this did not produce the
message above (although it pegged my CPU).
The only scenario where I've managed to reproduce the message
above is by making a huge (50 MB) xml file. This consistently
produces the message. But I don't realistically see how our xml
file could ever be over 1 MB.
First, can anyone cite another cause for this message? I'm
starting to lean towards the issue lying in our parsing logic such
as infinite recursion on a badly formed XML file. Second, does
anyone know of a solid xml SAX parsing actionscript utility where
you can assign callbacks to XML nodes? If the problem is in the
parsing, we may have to replace our homegrown solution with
something more robust and proven.

Is it a recursive parsing function? I'm not sure about this,
but I think this message pops up when there are more than 256
iterations in a loop (I've read something about this 256 limit,
that will end while loops if they exceed this, but with another
error message... but again, I'm not totally sure about that).
The message is typically for loops, but I don't know when it
fires. Sometimes it appears for really 'small' loops when you're
using the debugger (e.g. a for loop with 100 iterations), so maybe
it is connected to the time a loop is running. You could place some
trace statements in the xmlTraverse method, to see where the
function was when the message occurs, or take the time the function
needs and check if this might be related to the error.
That's all I can come up with, guess there are people here
with more insight to this...
cheers,
blemmo

I suddenly am unable to retrieve my emails. I discussed this with my Internet provider, but still get an error message and can't access my emails. Any suggestions???

I am unable to retrieve my emails since yesterday. I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading. I adjusted the settings, but still get an error message:
          Alert
          There may be a problem with the mail server or network. Verify the settings for account "Mail 1" or try again.
          The server returned the error: The connection to the server "smtp.roadrunner.com" on port 110 timed out.
I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail. They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?). They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
Any help would be appreciated.

Hi, what Interface are you using, & which one are you checking?
Each Interface will have it's own settings.
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Error message- "LR has encountered problems reading this photo" after installing LR 5.6 on new computer and retrieving all contents from old HD from external HD.

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

Hi-
I got a new PC laptop, retrieved all old HD contents from my external HD, installed LR 5.6 (5.4 on previous PC) and when I tried to open up my old Lightroom catalog it has an error saying "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to this photo". I tried to open the catalog straight from my external HD with the same error message. I've read about four billion forum threads to try to figure it out- files do not seem to be missing as most threads indicate. The other threads suggest there is a corruption with the file, but I don't THINK that is the case. Are there any other suggestions? If the file is corrupted, how do I find out for sure? Have I lost all my edits??
Thanks for your help and time!
sarah

I recently upgraded computer to windows 7. When I open itunes I am able to see my music library, but unable to play. Gives an error message of "Could not be found". How do I retrieve my library contents?

I recently upgraded computer to Windows 7. When I open itunes I am able to see my music library, but unable to play. Gives an error message of "Could not be found". How do I retrieve my library contents?

Hello ehoff5,
I would be concerned too if I was not able to play my music in iTunes. It sounds like the music files may be in a location that iTunes is not expecting. I recommend reviewing the following articles to locate you music files on your computer:
iTunes: Finding lost media and downloads
http://support.apple.com/kb/ts1408
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT4863 I composed a response to an e-mail that came into my iCloud mailbox. When I sent it out i received an error message. Will I be able to retrieve the e-mail I composed? If so what are the steps. It is not in my drafts.

I responded to an email thread on my Macbook Air iCloud account. Shortly after sending it i received an error message regarding settings. When I went to close the error message I was unable to find the e-mail I composed. Is there a way to retrieve it? If so, How??

Hi LeeJennie,
If your email didn't go out, you please check other mail boxes as well, including checking online with a browser.
iCloud: Troubleshooting iCloud Mail
http://support.apple.com/kb/TS4002
If your recipient doesn't receive your message
2. If you're using OS X Mail or accessing your iCloud Mail (icloud.com/mail) using Safari or another supported web browser, check your Drafts, Sent, and Outbox mailboxes:
Try also doing a search in Mail for the content.
Take care,
Nubz

Error message-retrieve data from database

I tried to retrieve data from oracle database. I got the following error message. I did compile the files without error. but when I run index.jsp I got the following error message. is it related with taglib Directives ?
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Exception in JSP: /index.jsp:8
5: <% AccessDB accessDB=new AccessDB(); %>
6:
7: <%-- create an instance of List, then retrieve SubjectNames --%>
8: <% List subjNames=accessDB.getSubjectName(); %>
9:
10: <%-- make list accessible to page --%>
11: <% request.setAttribute("subjNames", subjNames); %>
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:504)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:393)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
root cause
java.lang.NullPointerException
     org.AccessDB.getSubjectName(AccessDB.java:68)
     org.apache.jsp.index_jsp._jspService(index_jsp.java:62)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:332)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:368)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.17 logs.
Apache Tomcat/5.5.17

Hi,
Try to print the value in List...n comment the request.setAttribute...n then run the program....
check wot value is printed in List....
This error may b because the List doesnt have anyvalue into it.....

Try to retrieve data from database got error message

Try to retrieve data from database got error message *"java.lang.ArrayIndexOutOfBoundsException: 2*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.clearParameter(JdbcOdbcPreparedStatement.java:1023)*
*     sun.jdbc.odbc.JdbcOdbcPreparedStatement.setDate(JdbcOdbcPreparedStatement.java:811)*
*     guestbk.doGet(guestbk.java:32)*
*     guestbk.doPost(guestbk.java:73)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:710)*
*     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)"*
I have used prepared statment
java.text.SimpleDateFormat sdf = new java.text.SimpleDateFormat("dd/MM/yy");
            java.util.Date dt = sdf.parse(str3);
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   con=DriverManager.getConnection("jdbc:odbc:gbook");
                   //Statement stmt=con.createStatement();
PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));
//ps.executeQuery();
                   //ResultSet rs=stmt.executeQuery("select * from gbook where emailid = str1");
              ResultSet rs = ps.executeQuery();
                   out.println("<Html>");
                out.println("<Head>");
                   out.println("<Title>GuestBook</Title>");
                   out.println("</Head>");
                   out.println("<Table border=1 align=center >");
                   out.println("<H4><B><center>Teacher's Lesson Plan</center></B></H4><BR>");
                   out.println("<TR><TD><b>Teacher Name</b></TD><TD><b>Class</b></TD></TR>");
           while(rs.next())
                    ctr++;
                    String email=rs.getString("emailid");
                    String cmt=rs.getString("comment");
                    out.println("<TR><TD>"+email+"</TD><TD>"+cmt+"</TD></TR>");
        }Please anybody help .

PreparedStatement ps = con.prepareStatement("SELECT * from gbook where emailid =? AND date =?");
ps.setString(1,str1);
ps.setString(2,str2);
ps.setDate(3,new java.sql.Date(dt.getTime()));Your SQL query has 2 placeholders but you try to set 3 values.
And didn't you read the stack trace?
guestbk.doGet(guestbk.java:32)You could've tracked down line 32 and seen what was there at that line.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://www.catb.org/~esr/faqs/smart-questions.html
----------------------------------------------------------------

CHARM - Retrieve error messages

Similar Messages

Maybe you are looking for