Chart Comb with Static Table.
Hello everyone!
I have a graph made of bars and one static table below (with a column sorting). I need that the graph actualize automatically when I click on the table to see the next 10 items in the column sorting button.
Thank you for your help!
Edited by: Alex17 on 16-sep-2009 6:46
If I understand you correctly I don't think you understand how a compound layout works in the this case. The chart will show the full record set for the report, even if the table below it only shows 25 records per page, the chart still reflects the entire report. If for some reason you only want the chart to reflect only the visable table records, which makes no sense to me BTW, I'm pretty sure it will be very complex to implement (maybe something envolving two seperate reports in one dashboard?). If that's what you want, maybe one of the experts here could help you.
Similar Messages
-
Show Data as percent of Column with static table
Hello,
I have a problem calculating a % in a table. I have two columns in criteria tab:
Departments and measure
I need an extra column that calc % of total departments for each department. I know that I can do it with pivot table creating a new column and put: Show Data --> as Percent of --> Column but I need to do with static table.
Is possible to do it??
Thanks!!!Alex,
You could try the following example here :
http://www.biconsultinggroup.com/knowledgebase.asp?CategoryID=198&SubCategoryID=364
using sum( measure by dimension attribute)
This should give you access to the grand total in the report as a column, from which you can derive % of.
HTH, if correct please mark answered / award points as you see fit to do so!!
Alastair -
Hi Experts! I have one assignment to do...I have a bar line chart with departments on axis X and a static table with departments on rows....and one measure. Chart and static table has the same info. My static table has "Enable column sorting in Dashboards" YES, and a Rows per Page 10.
In dashboard I can click on column department to order A-Z or Z-A and my chart also changes, but in my chart I can see ALL departments (not 10) :S. Is possible to see in chart the same departments that I see in static table???
Thank you very much!
Regardsthis can be done with some work in pivot table. in pivot table use chart + table for your report. then implement pivot table pagination. that allows you to select page and based on selection chart and table changes. but enable sorting on dashboard wont work in pivot tables.
and here is the link for pagination on pivot table.
http://oraclebizint.wordpress.com/2008/01/17/oracle-bi-101332-pagination-in-pivot-tables/ -
ABAP transformation to XML for sap chart engine with internal table
Hello.
I am new to the SAP chart engine, XML and transformations so please be patient with me from an ABAP-program I am trying to call a Z-transformation and attach an internal table with two columns. In the ST program I want to loop through the table and for each row insert the two values from the table in the XML.
In an ABAP-program I have an internal table containing datacoordinates for a scattered chart.
The table looks like this:
DATA: BEGIN OF coordinate,
x_value TYPE f,
y_value TYPE f,
END OF coordinate,
polygon_data LIKE STANDARD TABLE OF coordinate with header line.
As a prototype I just add a few coordinates like this:
polygon_data-x_value = '700'.
polygon_data-y_value = '8'.
APPEND polygon_data.
polygon_data-x_value = '1400'.
polygon_data-y_value = '3'.
APPEND polygon_data.
polygon_data-x_value = '1400'.
polygon_data-y_value = '10'.
APPEND polygon_data.
polygon_data-x_value = '700'.
polygon_data-y_value = '10'.
APPEND polygon_data.
polygon_data-x_value = '700'.
polygon_data-y_value = '3'.
APPEND polygon_data.
I have created a Z-transformation and I call it like this (I also have a separate transformation for all the customizing generated with SAP chart designer but that one works fine):
DATA: data_xml TYPE xstring.
CALL TRANSFORMATION ztest_ce_tables2xml
SOURCE polygon_data = polygon_data
RESULT XML data_xml.
Since I am trying to create a scattered chart I need to insert an X and Y value for each coordinate.In the manual SAP Chart engine - XML format description it looks like this:
<ChartData>
<Series>
<Point>
<Value type="x">1</Value>
<Value type="y">1</Value>
</Point>
<Point>
<Value type="x">2</Value>
<Value type="y">2</Value>
</Point>
My ST-program that I cannot get to work looks like below. How can I loop through my internal table and get the X and thy Y value for each row in my internal table?
BR Tommy (Sweden)
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="POLYGON_DATA"/>
<tt:template>
<ChartData>
<Series>
<tt:loop ref=".POLYGON_DATA">
<Point>
<Value type="x"><tt:copy ref=".POLYGON_DATA.X_VALUE"/></Value>
<Value type="y"><tt:copy ref=".POLYGON_DATA.Y_VALUE"/></Value>
</Point>
</tt:loop>
</Series>
</ChartData>
</tt:template>
</tt:transform>Hello again.
I found the solution and would like to share it with the forum, maybe it could help someone.
My first error was in the call transformation statement:
CALL TRANSFORMATION ztest_ce_tables2xml
SOURCE polygon_data = polygon_data [] <----
Do not forget these
RESULT XML data_xml.
I also had an error in the ST program, it should look like this:
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="POLYGON_DATA"/>
<tt:template>
<ChartData>
<Series>
<tt:loop ref=".POLYGON_DATA">
<Point>
<Value type="x"><tt:value ref="$ref.X_VALUE"/></Value>
<Value type="y"><tt:value ref="$ref.Y_VALUE"/></Value>
</Point>
</tt:loop>
</Series>
</ChartData>
</tt:template>
</tt:transform> -
Chart attached with Crosstab table/Horizontal table in same block
Hello All,
I need to design a chart with table data which may be corsstab/horizontal table in the same block using WebI. Is this possible in WebI??
Thanks,
Anila.Hi Anila,
I just tried at my end,we cant show graph and data in one block.,but you can follow below trick.
Insert a column into block , set no color to the borders in cell properties.and place graph in that column.
Regards,
Samatha B -
How To Create Table with Static Data
JDEV 10.1.3
ADF BC
ADF Faces
I am trying to make some simple screen/screenflow diagrams to help flesh out some requirements. To do that, I need to make a table with static data that is not hooked up to a data source (because the data model has not yet been clearly defined, and I'm using the diagrams to help iterate the requirements).
Is it possible to create a table that shows static data (i.e. a set of rows that does not come from a model data source, but rather is hardcoded.)
If not, how does one create mock ups without actually implementing the data model?
Thank you.Deepak, what specifically in those 2 links from Amis are useful? Those 2 posts are about bind variables, not static list of values?
In response to the original poster, I'll attempt to help a little more.
In the 11g release you can create VOs based on a static list of values. However in your case on 10.1.3, the best method I've found is to create a VO based on a SELECT <columns> FROM DUAL statement. The columns then include your dummy data. If you need more than one row, simply UNION ALL a number of SELECT statements together.
What I haven't checked, is when you eventually transform the VO based on the SELECT DUAL statement into a VO based on an EO drawing real data from the database, is it an easy process? I recommend you try this out before committing to the approach above. Let us know how you go.
Regards,
CM. -
Is there a way to have a "text box" stay with a table or chart?
I have multiple tables on one sheet. I understand that the table is named over in the left side of the screen. For what i need to do, I am looking at multiple tables on one sheet. Its easier to know which is which by having a text box above with its desctription. If I need to move that table I would like for the text box to move with the table it is for, rather than having to move them both seperately. Is there a way to like "merge" them together? I've selected the two together and looked for an option in the inspector & in the menu bar, yet still cant figure it out.
=/ help!!For a table, you can use the Table Inspector to Show Name (checkbox near the top of the Inspector pane).
As seen above, the Table name can be formatted using a choice of font, size and colour (not changed in the example). To format, click on the displayed name to select its frame/box. Then use the controls in the format bar to chose font, set size and color, and set the background colour if desired.
I had finally just figured that out before I read this, after quite some time of messing around with it. Thanks for your quick response. Wish i realized these discussions were available when I first started using numbers! How very helpful!!
And to fireflyer, thanks for that advice I didnt know you can do that and I will be able to use that in many situations! =) -
How to create a dynamic table (repeating) with static header?
Hello
My purpose is to create a table which should be dynamically filled at runtime depending on the number of elements in the datasource($record.list). If the list is empty, the table shouldn't be displayed at all.
I created a subform which holds a table, ticking "Repeat Subform for each data item" and I set the binding of the table elements to $record.list[*].myelement. This works fine so far.
For the table header I created a second subform with a table having exactly the same size like the other table with text fields that contain the table header texts.
My problem now is that I would like to control the display of the subform which serves as table header row depending on whether $record.list is empty or not.
What's the best way to do this? How can I have access to the datasource for a form?
Thank you very much for your help!!!
Best regards
Bettina HeppHi,
Instead of creating the header row outside the table.
Create it inside the same table as header row.
So when you create a condition then automatically applicable for the header row also.
This is the best option.
Regards,
sasi -
Please I need some help with a table
Hi All
I need some help with a table.
My table needs to hold prices that the user can update.
Also has a total of the column.
my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
I have tried using but as I need to set the toal with something like total
totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
Can any one please advise on some way I can get this to work ?
Thanks for reading
CraigHi there camickr
thanks for the help the other day
this is my full code....
package printing;
import java.awt.*;
import java.awt.event.*;
import java.awt.print.*;
import javax.swing.*;
import javax.swing.table.*;
import java.text.DecimalFormat;
public class tablePanel
extends JDialog implements Printable {
BorderLayout borderLayout1 = new BorderLayout();
private boolean printing = false;
private Dialog1 dialog;
JPanel jPanel = new JPanel();
JTable table;
JScrollPane scrollPane1 = new JScrollPane();
DefaultTableModel model;
private String[] columnNames = {
private Object[][] data;
private String selectTotal;
private double total;
public tablePanel(Dialog1 dp) {
dp = dialog;
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
public tablePanel() {
try {
jbInit();
catch (Exception exception) {
exception.printStackTrace();
private void jbInit() throws Exception {
jPanel.setLayout(borderLayout1);
scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
this.add(jPanel);
jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
scrollPane1.getViewport().add(table);
jPanel.setOpaque(true);
newTable();
addToModel();
addRows();
setTotal();
public static void main(String[] args) {
tablePanel tablePanel = new tablePanel();
tablePanel.pack();
tablePanel.setVisible(true);
public void setTotal() {
total = 0;
int i = table.getRowCount();
for (i = 0; i < table.getRowCount(); i++) {
String name = (String) table.getValueAt(i, 1);
if (!"".equals(name)) {
if (i != table.getRowCount() - 1) {
double dt = Double.parseDouble(name);
total = total + dt;
String str = Double.toString(total);
table.setValueAt(str, table.getRowCount() - 1, 1);
super.repaint();
public void newTable() {
model = new DefaultTableModel(data, columnNames) {
table = new JTable() {
public Component prepareRenderer(TableCellRenderer renderer,
int row, int col) {
Component c = super.prepareRenderer(renderer, row, col);
if (printing) {
c.setBackground(getBackground());
else {
if (row % 2 == 1 && !isCellSelected(row, col)) {
c.setBackground(getBackground());
else {
c.setBackground(new Color(227, 239, 250));
if (isCellSelected(row, col)) {
c.setBackground(new Color(190, 220, 250));
return c;
table.addMouseListener(new MouseAdapter() {
public void mouseClicked(MouseEvent e) {
if (e.getClickCount() == 2) {
if (e.getClickCount() == 1) {
if (table.getSelectedColumn() == 1) {
table.setTableHeader(null);
table.setModel(model);
scrollPane1.getViewport().add(table);
table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
public void addToModel() {
Object[] data = {
"Price", "5800"};
model.addRow(data);
public void addRows() {
int rows = 20;
for (int i = 0; i < rows; i++) {
Object[] data = {
model.addRow(data);
public void printOut() {
PrinterJob pj = PrinterJob.getPrinterJob();
pj.setPrintable(tablePanel.this);
pj.printDialog();
try {
pj.print();
catch (Exception PrintException) {}
public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
Graphics2D g2 = (Graphics2D) g;
g2.setColor(Color.black);
int fontHeight = g2.getFontMetrics().getHeight();
int fontDesent = g2.getFontMetrics().getDescent();
//leave room for page number
double pageHeight = pageFormat.getImageableHeight() - fontHeight;
double pageWidth = pageFormat.getImageableWidth();
double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
double scale = 1;
if (tableWidth >= pageWidth) {
scale = pageWidth / tableWidth;
double headerHeightOnPage = 16.0;
//double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
//System.out.println("this is the hedder heigth " + headerHeightOnPage);
double tableWidthOnPage = tableWidth * scale;
double oneRowHeight = (table.getRowHeight() + table.getRowMargin()) * scale;
int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
double pageHeightForTable = oneRowHeight *numRowsOnAPage;
int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
if (pageIndex >= totalNumPages) {
return NO_SUCH_PAGE;
g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
//bottom center
g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages), (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
g2.translate(0f, headerHeightOnPage);
g2.translate(0f, -pageIndex * pageHeightForTable);
//If this piece of the table is smaller
//than the size available,
//clip to the appropriate bounds.
if (pageIndex + 1 == totalNumPages) {
int lastRowPrinted =
numRowsOnAPage * pageIndex;
int numRowsLeft =
table.getRowCount()
- lastRowPrinted;
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(oneRowHeight *
numRowsLeft));
//else clip to the entire area available.
else {
g2.setClip(0,
(int) (pageHeightForTable * pageIndex),
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(pageHeightForTable));
g2.scale(scale, scale);
printing = true;
try {
table.paint(g2);
finally {
printing = false;
//tableView.paint(g2);
g2.scale(1 / scale, 1 / scale);
g2.translate(0f, pageIndex * pageHeightForTable);
g2.translate(0f, -headerHeightOnPage);
g2.setClip(0, 0,
(int) Math.ceil(tableWidthOnPage),
(int) Math.ceil(headerHeightOnPage));
g2.scale(scale, scale);
//table.getTableHeader().paint(g2);
//paint header at top
return Printable.PAGE_EXISTS;
class TableRenderDollar extends DefaultTableCellRenderer{
public Component getTableCellRendererComponent(
JTable table,
Object value,
boolean isSelected,
boolean isFocused,
int row, int column) {
setHorizontalAlignment(SwingConstants.RIGHT);
Component component = super.getTableCellRendererComponent(
table,
value,
isSelected,
isFocused,
row,
column);
if( value == null || value .equals("")){
( (JLabel) component).setText("");
}else{
double number = 0.0;
number = new Double(value.toString()).doubleValue();
DecimalFormat df = new DecimalFormat(",##0.00");
( (JLabel) component).setText(df.format(number));
return component;
} -
Dealing with DB table-entries in ABAP OO
Hi everybody,
in ABAP-Reports (normally) we have deal a lot with DB table entries.
Is there a "state of the art" for doing this with ABAP OO?
An easy example:
Asuming I want to select table entries into an
internal table from BUT000.And than I want to write: the entries.
How would this look like in ABAP OO?
show the internal ZTable be my object?
or should every BUT000-Table-record be my object?
Regards Mario
null
Message was edited by:
Mario MüllerHello Mario,
A very good question. This is what is called as modeling.
I shall give you an approach into this. There is no right and wrong way of doing it. Probably, only a more desriable or better way !!
How you model it depends on what your object is.
If you have an internal table of sales orders, still in real world the services or methods are on a single sales order. So the object here is a single sales order.
=> I would model the class to deal with one sales order. (this more or less answers your question)
2. Just to take this a little further.
What I would do is have 3 different layers of abstraction.
A UI class, a business layer class and a DB class.
UI class can only talk to business class, business can talk to DB class. And the DB class is a static class.
The UI class is only responsbile to do the display job.
The UI will display multiple sales orders for eg, so u have an internal table of instances to the business layer.
The business layer itself does validation, processing for each sales order.
The business layer can also have soem static methods (or class methods) to select multiple records from Database. This is static, as it is not acting on one sales order, but you are returning multiple. This method should simply call a method of the DB layer.
The DB layer is meant only to read from DB and write to DB.
Hope this helps. Remember to reward points, if it does.
For more highlights into this, refer to some material on design approach or design pattern.
Best Rgds,
Prashanth.
SAP. -
WD4A Dynamic ALV Table with dynamic tables
Hi all,
first I want give you the information what I try to do.
I have an another WD4A application for administrative use in which I can assign certain tablefields to a certain user. You can say it's something like a customizing application.
In the next application (with my issues) I will display the tables for the user, but these tables are not the complete table.
I have a node in my context of the component controller which is bound to my ALV. I add during the runtime attributes to my node.
* .... coding ....declaration
* get the node
lr_node = wd_context->get_child_node( 'M_TABLE' ).
lr_node_info ?= lr_node->get_node_info( ).
* remove the attributes, if exists
lr_node_info->remove_dynamic_attributes( ).
* .... coding ....
* add attributes
LOOP AT l_t_m_table INTO l_s_m_table.
CLEAR ls_attribute.
* name of the attribute
MOVE l_s_m_table-NAME TO ls_attribute-NAME.
* DDIC type of the attribute
MOVE l_s_m_table-TYPE_NAME TO ls_attribute-TYPE_NAME.
* If the DDIC has a gen namespace like /B135/ replace the / with _
REPLACE ALL OCCURRENCES OF '/' IN ls_attribute-NAME WITH '_'.
* add the attribute
lr_node_info->add_attribute( EXPORTING
attribute_info = ls_attribute ).
ENDLOOP.
This coding works fine I get the columns in my ALV. Then I tried to fill my ALV table with data from a database table.
I created dynamicly an internal table with the following coding:
* Create dynamic table
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = l_t_FLDCAT
IMPORTING
EP_TABLE = l_t_NEW_M_TABLE.
* assign the table
ASSIGN l_t_NEW_M_TABLE->* TO <M_TABLE>.
* structure of table
CREATE DATA l_s_NEW_M_TABLE LIKE LINE OF <M_TABLE>.
ASSIGN l_s_NEW_M_TABLE->* TO <l_s_m_table>.
* get data from database
SELECT * FROM (l_m_table) INTO CORRESPONDING FIELDS OF TABLE <M_table> WHERE OBJVERS = 'A'.
With this coding I get the data from the database and only the required fields that means I have e.g. an itab with columns1, columns3, columns4 from the database.
I also added e.g. these columns (columns1, columns3, columns4 from the database) to the node as attribute. Now it should be possible to bind the table to the structure with this coding:
lr_comp_usage_m = wd_this->wd_cpuse_usage_alv_M_table( ).
* create component if not active
IF lr_comp_usage_m->has_active_component( ) IS INITIAL.
lr_comp_usage_m->create_component( ).
else.
* set data if node exists
l_ref_interfacecontroller = wd_this->wd_cpifc_usage_alv_M_table( ).
l_ref_interfacecontroller->set_data( lr_node ).
endif.
* bind table
lr_node->bind_table( <M_TABLE> ).
Now, I get an error, which is caused by the table binding.
In ST22 I get:
Short text
Line types of an internal table and a work area not compatible.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_WDR_CONTEXT_NODE_VAL=======CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The statement
"INSERT wa INTO TABLE itab"
requires the lines of the internal table "TABLE" and the
work area " wa" to be compatible. Compatibility means
equivalence in the context of ABAP/4 type checking.
In this case, the condition is not satisfied because the internal table
"TABLE" has the line type "u" and the length 28, but the work area " wa"
has the type "C" and the length 2.
(If the work area " wa" is the header line of the internal
table "TABLE", the above inconsistency can arise if an internal
table t with the line type T1 is passed to a subroutine (FORM or
FUNCTION) as an actual parameter and the corresponding formal
parameter p is declared in the subroutine by "TABLES p STRUCTURE T2".
If then T1 and T2 are incompatible, the header line p
has the type T2 (specifed by STRUCTURE), but the internal
table p has the line type T1 (passed from the actual parameter)).
Source Code Extract
Line SourceCde
1 method if_wd_context_node~get_static_attributes_table .
2
3 field-symbols:
4 <element> like line of me->collection,
5 <static_attributes> type data,
6 <table> type index table.
7
8 * check whether elements are supllied or not
9 if me->elements_supplied = abap_false.
10 me->supply_elements( ).
11 endif.
12
13 clear table.
14
15 if me->table_ref is not initial.
16 assign me->table_ref->* to <table>.
17 table = <table>.
18 else.
19 loop at me->collection assigning <element> from from to to.
20 assign <element>->static_attributes->* to <static_attributes>.
error in line 21 insert <static_attributes> into table table.
22 endloop.
23 endif.
24
25 endmethod.
Any suggestions? Is it allowed to use bind_table() with a field symbol?
Another strange thing is that if I try the same with static itab and attributes during runtime it works, but only if the fields of the itab has the same name as the attributes, which means that I can not use itabs with fieldnames like /BI0/S_CUSTOMER and if I can not use them it's difficult to read data from database with SELECT * FROM ... INTO CORRESPONDING FIELDS OF TABLE itab.
Thanks in advance for your suggestions!
Best Regards,
MarcelHi Francois,
I solve it with the RTTI and the method
lr_node_info = lr_node_info->add_new_child_node(
name = 'Dynamic_TABLE'
IS_MANDATORY = ABAP_false
IS_MULTIPLE = ABAP_true
STATIC_ELEMENT_RTTI = lr_struct_descr
IS_STATIC = ABAP_false
I don't know why it doesn't work with adding attributes and binding the table after adding the attributes.
Anyway thanks for your help.
Best Regards,
Marcel -
How to implement static tables in XI Mapping
I need to use a static table for lookup purposes in an XI mapping. I am using Java Mapping.
-- This is a small 5 columns - 264 rows table, which is unlikely to be changed.Hi,
U can maintained table in Xi and use the RFC lookup from graphical mapping this will avoid use of graphical mapping.
Refer the below weblog for more infor:
RFC lookup using JCO (without communication channel)
/people/sravya.talanki2/blog/2005/12/21/use-this-crazy-piece-for-any-rfc-mapping-lookups
RFC lookup with communication channel.
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
Thnx
Chirag -
Chart - problem with realize one of the function under CR XI
Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
year ,
month
Second query
"SELECT
year + FLOOR({month + offset} % 13),
{month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you. -
Grand total "before" on static table
I can do grand total "before" on pivot table...but I need to do in static table. Is possible??
With pivot table I have option "after", "before" but in static table I don't have any option...
Thanks!Set the aggregation for the metrics.. Either in RPD or in report.
In report, Open fx of column and you will aggregation drop down at bottom of pop up window. Set that to proper aggregation, and try grand totals.
- Madan -
I’m getting the below issue when I try to deploy a crystal report with Dynamic parameters in BI Launch Pad, when I deploy the same report with static parameters I can deploy and run it. I have Restarted the BI server, still the issue exitno use. kindly help me on this issue.
“This error occurred: Adding Crystal Report "CrystalReport1.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file CrystalReport1. Reason: Failed to read parameter object”.BO does not run dynamic params through the report as would happen without BusinessObjects (BO) or Crystal Reports Server (CRS). When you publish a report with dynamic parameters to BO/CRS, the prompt is published to the repository so that it can be accessed through the Business View Manager (which can be installed as part of the client tools). In order for this to work a couple of things need to happen:
1. You need to be sure that you check the "Update Repository" box on the Save As screen the first time you publish the report.
2. Your BO/CRS user needs to have "view" access to the Crystal2013ReportApplicationServer in the Servers section in the CMC - in fact, the Everyone group should be given view access to the server in order for dynamic prompts to work correctly.
3. In the Business View Manager, the Administrator user needs to give your user, or, even better, a Crystal Developers group full control access to the "Dynamic Cascading Prompts" folder.
Best practice for dynamic prompts in a BO/CRS environment is to actually create the prompts in the Business View Manager. This will allow you to create a single data connection that can be reused and also create lists of values such that the same list or prompt can be reused by multiple reports. If you just create the prompts in Crystal, you will end up with multiple data connections to the same database, the prompts will use the whole query for the reports to get the dynamic values instead of just a focused query to the lookup table that contains the values, and there ends up being lots of duplication and chaos.
-Dell
Maybe you are looking for
-
i want to copy my data to my iPhone via itools the error occured is unable to ascertain the compatibility of itunes my itools and itunes both are updated. please help
-
Product category filter now working
Hi Gurus, We want to restrict material flow from ERP toSRM by filtering on the basis of Product category. In Tcode R3AC1, we tried filtering entire number range e.g from 0301 to 03999, hence we used 03* in the filtering criteria. But the materials wh
-
Pantalla Azul y reinicio en IPad Air iOS 8
Hola, después que instalé el iOS8 en mi IPad Air, cada cierto tiempo sale una pantalla azul y automáticamente se reinicia, supongo que el problema viene a raíz de la actualización ya que antes no le pasaba eso, alguien sabrá que se puede hacer? Mucha
-
Running iphone and ipod form one itune programme. How
I have had an Ipod for a number of years 20gb. My son has just passed on to me a 3gb iphone. How do I run both the iphone and Ipod from the same itune's programme. I want to take off a number of songs from the Iphone and download some of my own as he
-
For those of you who have pre-ordered phones in the past, did you find you got better results doing it from apple rather than AT&T or vice versa? Just wondering if it really even matters. Thanks!