Chart Interface In web application designer?

Hi experts:
I want to know if there is chart interface in web application designer?when i click a node in the chart ,it can triggle a js to jump to another page to show the detail? how I can do it?
I think there do have method to implement,as when I put the mouse on the node of the chart ,the "javascipt:;" shows in the status bar of the IE ,I don't know where can I write the JS ?
Best Regards
chan.

Hi Chan,
1. You type tcode RSBBS in BW system
2. Under Query Tab, there is 'Sender' field. You input the the origin query.
3. Click 'Create' button, you choose the report type that you want to jump into. In you case, if you want to jump into a web template, choose 'BW Web Application'
4. In 'Report' field, choose the destination query/web template.
For more details, please look at this link
http://help.sap.com/saphelp_erp2004/helpdata/en/c9/bc2d38c4b3f205e10000009b38f8cf/content.htm
Hope it will help.
Cheers,
Mona

Similar Messages

Chart problems in Web-Application Designer

Hello,
I am trying to use CHART in Web Application Designer.
But whatever TYPE I select in that (pie/stack/..),
It shows the report with default chart type..
Then after one /two trials, I have run time error. & Web application Designer crashes. In preview of that chart on template, it shows the chart type I have selected.
What am I missing in my steps. Or is some library missing..
Thanks for you suggestion.
Is very urgent & as I need to show report tomorrow.
Regards,
Santosh

Hi Santosh,
Defining the Width and Height of the Entire Chart
in the Properties
Enter the desired values in fields Width and Height of the window in which you are editing the chart. The entries should be in pixels.
Choose Apply.
The size of the entire chart is changed according to your specifications.
Changing the Size of the Entire Chart with the Mouse
Point to the border of the preview window with the mouse.
The cursor becomes a double arrow.
Click on the border and pull the preview window to the required size.
The size of the entire chart is changed when you let go of the mouse key.
Changing the Size of the Plot Area or the Legend with the Mouse
Click on the element whose size you want to change (plot area or legend).
The element is enclosed in a move handle.
Point to one of the move handles with the mouse.
The cursor becomes a double arrow.
If the cursor does not become a double arrow, you might not have selected the right element, for example the chart area instead of the plot area. In this case click again on the element whose size you want to change.
Click on the move handle and keep the mouse key pressed.
The cursor becomes a cross.
Pull the element to the desired size.
The size of the element is changed when you let go of the mouse key.
Avoid stretching the plot area over the whole area of the chart. The outermost border of the plot area disappears from the visible area in this case and cannot be clicked on again. You cannot change the size of the plot area. If you made the plot area too large by accident, you can undo it with the menu option Undo in the context menu. You can reset the plot area to its original size with Reset, but you will lose all the changes you made to the chart.

It is simple issue D't worry..And one morething is Check the Specific Properties of the Template in Design of the web template.
Thanks
Bhima Chandra Sekhar

Edit Chart error in web application designer

Hello,
Whenever I try to edit a chart in de WAD the edit popup window is empty (no edit fields). Does anyone know how to solve this error. BW is running on WAS 6.20 and I am running SAP GUI 6.40 patch 22.
Kind regards,
Raymond Does

Problem solved!
My graphics adapter was set to 128% DPI. This caused 2 errors:
1. The tabs below the template window where "overwritten" by the template window.
2. The "edit chart" popup window remained blank.
After setting my graphics adaper to 96 dpi (default) everything worked fine.

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Web Application Designer - Chart (Bar Chart) - Value description of chart

Hi Community,
i use the Web Application Designer in BW 3.5 to create a bar chart with the chart web item (Bar chart). Everything works fine - but in the query the values are 10.000.000 and much more. The description in the chart lokks like 10000000 - Nobody can handle this information in the chart - i could not change the values in the ODS. Is there a possibility to show only steps in 1.000.000 in the chart. In the chart description it should look like 10 and the in a text "in billion".
Is the chart designer in the WAD possible to habdle this ? Hope you have a solution

After applying IGS patch. It is resolved.

Navigational charts in Web Application Designer

Hello all,
I have a question regarding actionable charts in Web Application Designer. For example a user selects a bar in a chart and based on that selection filters to additional reports or changes existing charts/tables in the Web Application Designer? I know you can right click and setup RRI then goto functionality but I would like the capability to click on the bar chart and then proceed with the action.
I know this can be done with Geo enabled Map Web Items where you click on a state/country and drill in for additional information but I'd like to know if it can be done with in charts. I know there is an option in WAD to setup Eventing, maybe there you set the onclick event to do the function?
Any help is appreciated.
Thanks.

Does anyone have any suggestions? I keep reading its possible but found no examples.
Thanks,

Web Application Designer: Change Table Chart to Line Format

Dear Experts,
We, as novices of the web application designer, encounter a problem in using this program. After having created a Chart table, we cannot changed it to the line format.
The things that we perform are as follows:
1) Right click and choose lines format
2) Give it all titles
3) Click Next until finish
However, the result is still the chart table. Is there anyone who kindly give me steps of how to change it.

Hi,
Please try the following:
1. Highlight the chart.
2. In the Web Item Properties for chart, go to Edit Chart.
3. Click on the ... incon
4. Pick Lines
5. Pick a type of Lines graph.
6. Follow the wizard to change the required properties.
This should work for you.
Regards,
Xibi

How to create own Web Items for Web Application Designer

Hi all,
is it possible to create own Web Items for the Bex Web Application Designer? Each Web Item has a Master Web Item and a class that is responsible for rendering data. I need a solution to get the Web Item's data - i.e. the content of a table (if Web Item = table). So my approach would be to create an own (Standard) Web Item with an own class. For example I would like to change the table's Web Item parameter <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/> to an own class...
Is this possible?
Or ist there any possibility to get the Web Item's data by an interface?
Any support is welcome...thanks in advance!
Best regards,
Dominik

if you want to create your own webitem check out the link given by other sdner.
if you want to be able to execute BW query using abap you can check out the following weblog.
/people/durairaj.athavanraja/blog/2005/12/05/execute-bw-query-using-abap-part-iii
Regards
Raja

Working with WEB APPLICATION DESIGNER ( WAD)

Hi all ,
Could anyone pl suggest me some books or some URL's for me for mastering in WAD. I am new to this.Bail me out of this situation .
Thx in Advance ,
Badarinarayan.H.

Hi Badri,
WAD:
http://help.sap.com/saphelp_nw04/helpdata/en/1a/456a3badc1b315e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/47/d4fed1c60a9743ade3b4cf306d5d48/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/40/8b174082fe1961e10000000a155106/content.htm
http://service.sap.com/bi -> SAP BW InfoIndex -> Web Application Design (3.x)
have a look on this thread posted, it speaks about front end problems in WAD:/thread/101416 [original link is broken]
To know about hyperlinking in WAD:
'how to enchance web context menu'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3541a990-0201-0010-f1ae-b24b72690df7
'how to table interface'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/49dfeb90-0201-0010-a1a2-9d7a7ca1a238
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f0aca990-0201-0010-0380-f3aac4127a57
and on how to use JAVA in WAD:
WAD and JAVA
web reference bw 3.5
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b1089290-0201-0010-288c-98e4d26487ee
Regards,
R.Ravi

Report to Report - Web Application Designer

I have created a simple template using BEx Web Application Designer. The Query I've picked is set up with receiver reports. e.g. I want to do a report to report interface from the data in my template to another query and another template. However when I choose Goto on the data and select the query I want it opens the data but opens it using a template I havent created. A standard template? How do I get the query I go to to open with one of my templates? Do I have to do some linking somewhere?

Hello Joel,
Have you put your new template in 'Set standard web templates'?
Txn rscustv27? this may not work but it is worth a try. u would need to put it in the bottom option.
Another way to do this would be to create an iview for each query and in the the query properties you can assign what template you will use under 'bex web application query string'. The iView properties can be found in the Portal Content Directory. i think this will definatley work.
Also one other thing to look at in WAS is the RRI options (in the properties of the web template). This may have something in there.
Enjoy your friday.....
Nick.

Web Application Designer broadcast select Web Items

Hello all,
I have a request to use the broadcast only select web items, Chart/Analysis items only in a Web Application Designer Template. Is this possible? I've tried the option "Data Binding" Report [ITEM_REF] but that didn't work and brought everything in my Web Template in my PDF broadcast to Email. It seems to ignore the Data Binding and bring everything in the template, pictures, Charts, Analysis items. Can anyone tell me if it is possible to select only select web items to broadcast via PDF?
Thank you in advance!

Found it:
- New Button
- Action = Command
- Commands for DataProviders/ Hierarchies / SET_HIERARCHY

Print a Web Template with Web Application Designer 3.X

Hello
I would know how I can print a web template made with Web Application Designer 3.X and that it is in the Intranet.
Actually I'm printing that page with the option of the browser (Internet Explorer) but it print only I see, no print all the chart and the rest of the columns.
How can I print all the data that compose the web template?
Thank you.

Hello Sharath,
First check whether you have change authorizations for WAD, check you user name is added in the role for web templates and also check the authorizations.
then in the web template in the menu bar go to view option ,select web items and properties , so that you can find them in the left hand side, then replace the chart item with the table and assign the query to the table.
hope it is clear,
assign points if useful.

Web Application Designer thinks that script outside head is a bad idea

Hi all,
I am using BW Web Application Designer to create a web interface for out offshore users. I found an annoying bug in WAD that is driving me up the wall:
When I place <script> tags within <body> (or anywhere outside <head> tags, really) in the HTML view of WAD, and change to Layout view, the automatic HTML validation places "</head><body>" tags after the terminating </script>.
Presumably this is because WAD thinks that the scripts should be contained within the header, and the header closing and body opening tags are missing, and tries to fix this by adding them.
Is there any way to fix this bug?

Hi,
I think it's best to create a message in the service market place for this.
I don't see any notes on this
Eddy
PS. Reward useful answers and earn points yourself

Web Application Designer ver 3 vs Standard Web base on Query designer

Hi All,
*. How to get the detail information regarding the standard template that have been created by SAP when we click the button 'Display Query on the Web'
The standard template quiet useful , however we trying to make the graph bigger.
*. In Web application designer, we put 1. Generic Navigation Block, Table and Chart. But we cant find how to make Generic Navigation block and table in same row as it is shown in standard template.
Please Advice.
Cheers,
Nies

Hi,
Please check the URL:
http://help.sap.com/saphelp_nw04/helpdata/en/1d/499d398b45160ae10000000a11402f/frameset.htm
Thanks,
Venkat

Web Application Designer need help ASAP

Hi All,
I have a requirement to customize the analysis item in a web application designer.
I have created new templetes and added a analysis with a query view as data provider .
in the output I require to hide some rows of the query view and also change the color of the text i.e the numbers.
How to modify the output of the analysis item which is coming from a query view or is there any way where I can modify the output of the web templete.
Thanking You,
Rukmini

Dear Devi,
If you do not want to use the default display and behavior of the Analysis Web item, you can use the Modification parameter to change them. You can modify the table structure and the table cells.
The Modification parameter provides modules whose use can be controlled using additional parameters.
This function enables you to use similar options to those available in earlier releases with the Web Design API for Tables. Unlike the Web Design API for Tables, modifications enable you to make targeted changes to the display and behavior without any programming.
Prerequisites
The modules are the main prerequisites for making modifications to the Analysis Web item. The modules are implemented in Java. The SAP Basis infrastructure in SAP NetWeaver 7.0 does not support any customer modifications or extensions to Java coding. Customers are therefore not able to develop their own modules for modifications to the Analysis Web item.
SAP delivers a number of sample modules. You can use parameters to modify the display and behavior of these modules.
Procedure
You use the modules as follows:
       1.      Select a module from the sample modules.
       2.      Specify the module in the Modification parameter of the Analysis Web item.
       3.      Control the display and behavior of the module by specifying the module-specific parameters.
Result
The table of the Analysis Web item is displayed in an individual manner using the modules. The behavior of the table may also be different. For example, you can define commands for table cells.
Example
For example, you can define a fixed column width or display comments in cells.
For more info :
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Hope this helps u..
Best Regards,
VVenkat..

Chart Interface In web application designer?

Similar Messages

Maybe you are looking for