Chart with data from different subject area

What I want to draw in a single chart is the following (I made this up just to show my requirement)
-The number of accounts by month (a line chart)
-The number of activities by month (bar chart)
Not all accounts necessary have any activity in a month.
In excel I can have two data streams and I can use two Y-axis to present the two different data streams (# of accounts, # of activities). Is it possible to do this in Analytics? I look at the chart setup. It seems there is only one Y-axis. Is that the case?

You can have 2 Y axis. Try the 3d charting mechanism and you may want to try a chart from a pivot stand point.

Similar Messages

  • Stacked Bar Chart with data from a Web Service

    Hi,
    I'm working on Dashboard Design (version 14.0.1.287) and I'm trying to create a chart linked to data from a webservice.
    With a Year in input, my webservice gives an Amount per Cities and Products
    Data retrieved look like this (Sheet1) :
    Paris          Tablets          45
    Paris          Laptops          12
    Paris          Cellulars          89
    New-York     Tablets          56
    New-York     Laptops          36
    New-York     Cellulars          1
    Londres          Tablets          150
    Londres          Laptops          3
    Londres          Cellulars          45
    Then I use a Pivot Table (created manually in Excel) looking like this (Sheet2) :
                   Tablets     Laptops     Cellulars
    Paris          45          12          89
    New-York     56          36          1
    Londres          150          3          45
    The chart is a Stacked Bar Chart plugged on the previous Pivot Table
    I create 3 series (one per Product), values (X) are set with Amount
    Category labels (Y) are set with Cities
    The goal is to have a dynamic chart (series and categories must update if a new city or a new product appears)
    So my question is : how can I set up the chart directly with data retrieved from webservice on Sheet1?
    Thx a lot !
    Nicolas
    Edited by: nicolasheurtevin on Sep 14, 2011 4:58 PM

    hi
    First thing , bad news if you are using .Net framework 1,
    just forget it, Flex 2 doesn't work well with framework 1, but 2nd,
    good news, if you want to use webservices, you'll have to make an
    array of objects on .Net Side and send it as objects to flex, i saw
    an example on the net but i can't seem to remember where, on the
    other hand,if you want to simply use, like i do, HTTPSERVICE its a
    very nice way to talk with .Net and you can see my example here
    http://flex1-for-dummies.blogspot.com
    By the way, in your code, you have a request tag , but you
    aren't requesting anything, because if you were you would have to
    make like this
    <mx:request>
    <Artist>{yourinputtext.text}</Artist>
    </mx:request>
    So if you don't have an input text, you don't need a request
    tag, only the operation.

  • Sorting by last 12 months in a Chart with data from the last 24 months

    Hi Guru's
    I am trying to create a Trend chart which will show the trend percentage vs previous year.
    In the X -axis I have Month wich is currently sorted by Jan, Feb, Mar etc ...Dec.
    The problem is that I want to show the last 12 months instead, but since I need data for the last 24 months to do so, I am having problems with the chart to show correct sorting.
    If this month is Oct 2011, I would want the chart to show the follwoing in the x axis:
    Oct10, Nov10, Dec10, Jan11,Feb11, Mar11, Arp11, May11, Jun11, Jul11, Aug11, Sep11.
    The problem is that in order for me to create the diff between previous year/month, the chart will either show last 24 months or 12 months thus causing the previous years values to disapear.
    So far I have managed to create a variable that will tell the age of the values in a month. The Chart is filtered and will now only contain data for the last 24 months. I have a variable which calculates the diff for each month agains previuos years values.
    So far so god, but how can I solve so that values are are included in the chart and sorted by the last 12 months?

    I discovered the solution, appereantly it was as easy as using the IN operator:
    =[Year] Where ([vAgeMonths] <= 12) In ([Time].[Short month])
    Now I am able to sort this by year and then month. Sometimes it helps tinkering a bit and a sollution will reveal it self.

  • Report using colmns from 2 subject areas

    Hi,
    I have to buld a report as below
    Product      ForecastRevenue(A)       ActualRevenue(B)       Variance
    A                200                                      100                           100
    B                200                                      200                            0
    ForecastRevenue(A) comes from 1 subject area and ActualRevenue(B) comes from another subject area. Using these 2 columns from different subject area I have to create
    a calculated column variance which is the difference of two columns. How can I create this report. Any idea?

    can be done in two ways;
    1. Using Union report
    Create a union report with two request.
    Request1 -          product               Forecast_Revenue     Actual Revenue
    Col expression     "product.name"     "Fact.Revenue"         0
    Request2 -          product               Forecast_Revenue     Actual Revenue
    Col expression      "product.name"    0                             "Fact.ACTUAL_Revenue"
    In the result tab create a pivote report and set the aggregation of fact column as sum.
    Add a calculated column and write the expression as
    Farecast_Revenue - Actual_Revenue
    You are done.
    2. Use the advance tab in the report and write a custom SQL to join these two subject area.
    eg.
    select product, A.forecast_reveneu, B.Forecast_Reveneue, A.forecast_reveneu-B.Forecast_Reveneue
    from SA1 A join SA2 B on (A.product=B.PRODUCT)
    You are done.
    Best of Luck,
    Kashi

  • Procedure to check data from different tables

    Hi
    I am trying to write a procedure to compare data from a table with another.
    Table 1
    ID Name Dept
    1 ABC Y
    2 DEF Z
    Table 2
    ID Dept
    1 Y
    2 Z
    Table 3
    Name ID
    1 ABC
    2 DEF
    I would like to compare each record data in Table 1 with data from different tables table2,table3 by matching ID,name.... Please help me with how I could start writing a procedure and also spool data that does not match from the table1 with other tables
    thanks
    Edited by: 890563 on Apr 30, 2012 10:34 AM

    Hope below helps you.
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE1 VALUES('123456','testfirst','testlast','testmiddle');
    INSERT INTO TABLE1 VALUES('123457','testfirst1','testlast1','testmiddle1');
    CREATE TABLE TABLE1
    (    ID          VARCHAR2(10),
         FIRST_NAME  VARCHAR2(30),
         LAST_NAME   VARCHAR2(30),
         MIDDLE_NAME VARCHAR2(30)
    INSERT INTO TABLE2 VALUES('123456','testfirst','testlas','testmidd');
    INSERT INTO TABLE2 VALUES('123457','testfirst2','testlast1','testmiddle1');
    SELECT TABLE1.ID,
            -- Match First Name
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE1.FIRST_NAME ELSE NULL END TABLE1_FIRST_NAME,
         CASE WHEN TABLE1.FIRST_NAME != TABLE2.FIRST_NAME THEN TABLE2.FIRST_NAME ELSE NULL END TABLE2_FIRST_NAME,
            -- Match Middle Name
         CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE1.MIDDLE_NAME ELSE NULL END TABLE1_MIDDLE_NAME,
            CASE WHEN TABLE1.MIDDLE_NAME != TABLE2.MIDDLE_NAME THEN TABLE2.MIDDLE_NAME ELSE NULL END TABLE2_MIDDLE_NAME,
            -- Match Last Name
         CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE1.LAST_NAME ELSE NULL END TABLE1_LAST_NAME,
            CASE WHEN TABLE1.LAST_NAME != TABLE2.LAST_NAME THEN TABLE2.LAST_NAME ELSE NULL END TABLE2_LAST_NAME
    FROM  TABLE1, TABLE2
    WHERE TABLE1.ID = TABLE2.ID
    ID         TABLE1_FIRST_NAME  TABLE2_FIRST_NAME  TABLE1_MIDDLE_NAME TABLE2_MIDDLE_NAME TABLE1_LAST_NAME   TABLE2_LAST_NAME
    123456     NULL               NULL               testmiddle         testmidd           testlast        testlas
    123457     testfirst1         testfirst2         NULL               NULL               NULL            NULL
    {code}                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • Error when  building a report from 2 different subject areas

    Hello Experts,
    I am using obiee 11.1.1.5.
    I have 5 dimension D1,D2,D3,D4,D5 connected to fact1 and 4 dimension connected to fact2 such as D1,D2,D6,D7.
    where D1,D2 is common to both the facts.
    Fact1 Is in subject area 1 and Fact2 is in subject area2.
    I need to create a report by adding columns of  subject area 1 and 2 with columns from all the dimensions D1,D2....D7.
    As of now i am getting error stating "No fact table exists at the requested level of detail " when i try to add columns from 2 different subject areas.
    Can anyone help me in solving the above problem.
    Is there any prerequisite to be taken care when  building a report from 2 different subject areas.
    Regards,
    NN

    Hello Nagireddy,
    So kind of you, for your quick reply
    I was able to solve the error by doing below steps in additional what you have specified
    -->For the fact table LTSs, set the logical level in the Content tab to the dimension's lowest level for each conforming dimension (leave the non-conforming dimensions level blank).
    Now I have another requirement i,e
    I need to have non measure columns such as Date into the newly created fact in BMM layer.
    I tried doing the steps which I followed for measure column, but it is throwing the same error which I get earlier.
    Below is the error
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14025] No fact table exists at the requested level of detail:
    Let me know if have any suggestions

  • Passing a value from Report A to B when B is in a different Subject Area

    I had posted a question previously on how to pass the Dept # from Report A to B when B i in a different Subject Area. The question was:
    Report A is a table on the Dashboard that shows Actual vs Budget results by Department. I want the user to click on the Department and be navigated to report B that shows the detail transactions that make up the Actual results. Report A and B are from different underlying subject areas. Thus when I navigate to report B, I see ALL departments, and not the one I clicked on in Report A to bring up Report B. How can I limit the results in Report B to be just the respective cell I clicked on in Report A?
    I got great advice from Nico on how to use the GO URL, but I can only get that to work if the 2 reports in question are from the same data model. In my case they are NOT.
    The GO URL seems to be working, as it does open up Report B when I click on the Department field in Report A, but it does not pass the Department number to Report B, even though reprot B has that field "as prompted".
    Can anyone definitively indicate whether what I'm trying to do is not possible in BI EE?

    Read this from Venkat... I think this will be helpful in understanding prompts, both the column prompts (Answers) type and the dashboard prompts. Very useful, I think.
    http://oraclebizint.wordpress.com/2008/04/30/oracle-bi-ee-101332-understanding-dashboard-prompts-passing-prompts-to-multiple-subject-areas-aliases/

  • Creating Sales Order with reference to Quotation from different Sales Area

    Hi,
    I would like to inform you that our customer (GE ENERGY OC) from Europe have a requirement where they want to create sales orders with reference to quotation that is from different sales area. Standard SAP functionality doesn't allow this feature, hence requesting your help to give me an update in this regard.
    Please treat this as urgent as they have to do business cutover where they are in the process of completing open sales orders.
    Thanks
    Ashfaq
    Mobile: +91-98857-07558
    E-Mail: [email protected]

    Hi RadhaKrishna,
    In standard system it is not possible to create sales order from a quotation whose sales are is different.
    However I think this is possible by using some user exit in sales order. I have never tried this.
    Regards
    srini

  • Fields from 2 different Subject Area via inner or outer join

    Hi All
    I have a requirement where I have to pull columns which are available in 2 different Subject Areas.
    For eg. Col1 and Col2 in one SubjectArea1/Report1 and Col2 and Col3(obviously not available in SubjectArea1) in second SubjectArea2/Report2.
    The resultant expected is a single report with Col1, Col2 and Col3.
    SUBJECTAREA1/REPORT1----     SUBJECTAREA2/REPORT2-----------     FINAL REPORT(on Inner/Outer join)     
    col1,col2----------------------------col2,col3-----------------------------------col1,col2,col3
    Please let me know how to achieve this

    Outter Joins are not available within On Demand. Please let me know what Objects you are trying to user here for SubjectArea One and SubjectArea Two?

  • Can I make a chart automatically source data from different parts of a table?

    Hi! I have a chart that shows data entered into one row across several columns of a table. I want the chart to automatically display information from the next row down once data has been entered into all fields of the first row without the chart displaying two sets of data i.e. just the second row only. I would greatly appreciate any ideas as I've hit a total roadblock with this. Thanks!

    Hi gsnwosu,
    I don't know of any way that Numbers can predict your next move! You must enter all your data and then select cells and create a chart. Here is a Table with a Header Row and two Rows of data:
    You don't say what kind of chart you want. Here is a bar chart using data from Row 2. Select Row 2 by clicking once on the grey Row number (2) and choose a chart type (bar chart here):
    Ignore the "Chart 3" label. I had three goes at this!
    Click on the chart to select it:
    then drag the Row (or Cells) selection down to Row 3 for a new chart (Oranges):
    Regards,
    Ian.
    Message was edited by: Yellowbox. then drag the Row (or Cells) selection down to Row 3 for a new chart (Oranges):

  • InfoCube Modelling-Adding data from different ODS's on to the Infocube

    Hi Experts,
    I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
    In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
    And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
    For Example.
    I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
    there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
    And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
    I will make it clear.
    I have a record in CUBE already containing Fields- : Delivery no, field_a,  field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
    Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
    And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
    Will the value in this info-object get overwritten ?
    OR.. will it combine the data from both the ODS's and show it as ONE record ???
    Please advice ... How will I solve this scenario ?
    Thanking You in Advance
    Shyne Sasimohanan

    Answer for your question and the suggestion.
    the data will look like as given below
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            0           0            0            0
    11233          0           0          0             0           1           1           1          1 
    but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
    Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
    11233           1           1           1          1            1           1           1          1 
    Regards,
    Siva A

  • How to combine data from different input forms outside a nested iView

    Hi,
    i try to combine data from different input forms in a single one.
    Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
    But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
    Is there any solution?
    Thanx
    Mathias

    Hi Scott,
    i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
    And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
    Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
    In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
    greets
    mathias

  • Prepopulating PDF Fillable Forms with data from XML files

    How can I get a PDF fillable form to open pre-populated with data from an XML file automatically? I've been using Adobe Standard 9.0 and am willing to upgrade in a modest fashion if necessary. I am aware of the Navigation method > Forms > Manage Form Data > Import Data. This works fine, however, my users are not smart enough to do tis much clicking and selecting. Is there an automated way to have this XML data merged into the PDF file on the fly. These files will reside on an internal local area network and will be operated on local PC's that will probably have Acrobat Reader ONLY. I have been told that the only way to accomplish this is through Java Scripting. I would prefer to do this the 'old fashioned' way of command line switches, but that does not appear to be an option. Does anyone have a sample Javascript that would accomplish what I am trying to achieve. Any help would be greatly appreciated.

    Hi Sharon
    The easiest way is:
    - Open your PDF form within Acrobat
    - From the File menu, import the XML form data into the form
    - From the File menu, use Save As... to save the file with a new name.
    The new PDF will be identical to the original one, but will have the data embedded in it. Voila.
    If you want the same form to pre-populate with different XML files depending on the circumstances, or if you're generating the XML on the fly, then things get more complicated. (And more expensive.) As your consultant said, LiveCycle Forms is one option, but it is expensive (actually even more than 10K). There are other options, including Cold Fusion, custom servlets, etc.
    Howard
    http://www.avoka.com

  • Select data from different database

    hi,
    may I know how to select data from different database?
    for example,
    I've 2 databases, OracleDB and OracleAR
    Connect with OracleAR in SQL*Plus
    select * from OracleDB.TableName
    does Oracle support this kind of query?
    how can I retrieve data from other database while im connecting with
    other database?

    Hi,
    Yes, it's possible. No, your syntax won't work.
    First of all you have to define a DATABASE LINK inside the DB where you are already connected (in this case OracleAR). Read docs how to do that.
    Second thing is the query. It will look like
    SELECT * from TableName@<NameOfDatabaseLink>Greetings,
    Guido

  • Consistency check error 38011: Logical tables from multiple subject areas..

    I received multiple 38011 errors when performing a consistency check after merging repositories:
    For example:
    Logical tables from multiple subject areas associated, OHRP and Enterprise Warehouse
    (OHRP and Enterprise Warehouse refer to different business models)
    I'm really not sure what this means, and Metalink and Google aren't turning up anything.
    Thoughts?
    -John

    John,
    Does it say anything about Assertion Failure? Also, this is straight up from help regarding import (through file menu) "Use this option when the objects you import are unrelated to objects already in the repository such as when the business model and physical layer objects do not exist. If an object of the same name and type exists, the import process overwrites the existing object with the new object. When you import objects from one repository into another, the repository from which you are importing must be consistent."
    Sometimes Merge does bring unexpected (and unwanted results) - especially if there're presentation aliases, duplicate business models, or naming conflicts. If it's not too late, I suggest you use Import,rather than Merge, also, preferably starting with a new RPD file. This would enable you to bring items piece-by-piece and hopefully would allow you to isolate the problem.
    Also, depending on the size - it's sometimes preferable to just reproduce missing part(s). I hope this is helpful.
    Also, I forgot to say - the Import is deprecated and not supported. They suggest you use Project Extract and Merge. If Merge isn't working out for you and Import isn't an option - maybe you could try Project.
    Edited by: wildmight on Mar 9, 2009 7:58 AM

Maybe you are looking for