Charts and dashboards

Gurus,
using APEX can we develop Charts and dashboards. if so can you help me find like/documentation regarding this?
thanks

Hi "user13319804"
What version of APEX are you using? Since APEX 3.0, Flash chart support has been supported, using a third-party component from AnyChart: http://anychart.com/. With APEX 4.2, we've integrated AnyChart 6 which offers HTML5 chart support, as well as enhanced Flash charts. The AnyChart online documentation is pretty detailed, and I'd recommend taking at their User's Guide for further information on the various chart types that we expose through the APEX wizards. Please note that we only license a subset of the chart types that AnyChart offer, and users are only licensed to create chart types that we expose through the APEX wizards.
I would also recommend reviewing the section Creating Charts in the APEX User's Guide - http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/bldapp_chrt.htm#CHDFEJAB - for information on creating charts. While it is possible to layout your pages in APEX as a dashboard, the AnyChart dashboard feature for creating a charts dashboard is not covered by our license.
You might find it useful to step through the Building Charts, Gantts and Maps OBE, available here: http://apex.oracle.com/pls/apex/f?p=44785:24:16898343576394::NO:24:P24_CONTENT_ID,P24_PREV_PAGE:4776,2.
I hope this helps.
Regards,
Hilary

Similar Messages

  • Live Charts and Gauges in Interactive Reporting

    Hi All,
    Im trying to create a Live chart and a Gauge for my dashboard in IR 11.1.1.3 Ver.
    I see the them in the design mode.. but when i try to add the FACT value it doesnt allow me to do it.
    Even if i try to see the report in the run mode i get blank screen.
    I tried even with a simple result which has
    Fact Target
    Service1 100
    Service2 95
    And can i use these Live charts and Gauges with Essbase as the source??
    Is there any prerequisite for the Live charts and gauges to display the data..
    Any document or post on the above problem will be helpful.

    the cannot be any null records in the facts or dimensions used.
    are you sure the adobe components are properly installed...can you open/view other analysis that use Live Charts or sliders/guages?
    -w

  • Users able to build reports and dashboards via the Web browser

    Hi All,
    My requiremts is "Users able to build reports and dashboards via the Web browser and perform ad-hoc queries and analysis online via the internet" .
    Requesting to kindly let us me know  the procedure to get resolve the above requirement.
    Thanks,
    KVR

    Hi,
    Go through the links below
    Designing Microsoft Excel 2007 Chart
    http://charts.jorgecamoes.com/how-to-create-an-excel-dashboard/
    http://dashboardspy.com/dashboards/23/designing-microsoft-excel-2007-charts
    SAP BUSINESSOBJECTS DASHBOARD BUILDER
    http://www.sap.com/solutions/sapbusinessobjects/large/business-intelligence/dashboard-visualization/dashboard-builder/index.epx
    http://www.sap.com/solutions/sapbusinessobjects/sme/reporting-dashboarding/index.epx
    It may help you
    Regards,
    Marasa.

  • Charts and pivot tables are not generated in Seed Cache using iBots

    Hi,
    I have been working on OBIEE cache. I encountered few issues.
    1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
    We are using OBIEE 10.1.3.3.1.
    2. When an end user logs in and access dashboard, the query is hitting the database.
    3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
    4. Please let me know if anyone has faced same issue and any solutions.
    Any help is appreciated
    Thanks,
    Swetha

    Hi,
    I have been working on OBIEE cache. I encountered few issues.
    1. We scheduled ibots to run daily and deliver dashboards to seeding cache. But the cache is not getting created for some reports which have charts and pivot tables in the dashboards .
    We are using OBIEE 10.1.3.3.1.
    2. When an end user logs in and access dashboard, the query is hitting the database.
    3. The sql query for reports which got created in server cache are not the same as sql query generated when an end user logs in to access dashboard. The difference being query generated when an end user is accessing dashboard is using aggregates.
    4. Please let me know if anyone has faced same issue and any solutions.
    Any help is appreciated
    Thanks,
    Swetha

  • SPC Charts and Analysis

    Hi....
    Do any of the BusinesssObjects applications support the generation of statistical process control (SPC) charts like x-bar charts and histograms?  Which one....
    I need a software application that can pull data out of a MS SQL 2005 database and Oracle database and present SPC charts via a web browser.  It'll need to be able to calculate and display standard deviation, control limits, specification limits, and process calability stats like Cpk.
    I've found some references to what I need in reference to 'BusinessObjects Process Analysis' and 'BusinessObjects Dashboard builder', but nothing that really communicates which product or products can do it.
    Thanks for any pointers.
    John

    You have to log into SAP to see the charts , cp,cpk values etc. I am not aware of any options to publish these charts on web, I never got  a chance to do that.
    But with my experience, the SPC options in standard SAP (ECC or R/3) are very limited not like  third party applications like infinity qs etc. The SPC chart options like any other sap r/3, go to the related transaction code and pull up the charts on various selection criteria. Configurable graphical options are available and SAP supports various kinds of charts.
    The other option (I have doen it in multiple places) is utilize sap to gather/collects data points, inerface third party statistical packages  like statistica to sap r/3 . downlaod the data from sap and do the analysis.
    Hope it helps.
    Thanks,
    Ram

  • Workflow and dashboard question

    Hi there,
    I'm project managing a SharePoint implementation and, although I know the basics of SharePoint's capabilities, I'm now diving into more complex requirements related to workflows and dashboards.  
    Context:  We're working to consolidate our metrics (both quant and qual) from all business units on a quarterly basis.  Some of the metrics are consistent across BUs, others are unique to particular units.    
    Approach:  I'm thinking we want to create either one form or multiple forms where units can add their baseline goals and progress.  After the data is entered, I want it to aggregate into an excel spreadsheet(s) so we can analyze it and ultimately
    create different dashboards and graphs to visually represent the units' progress.
    I imagine this is possible, but is this the best approach?  What apps are the best to use?  
    Thanks for pointing me in the right direction!
    -M

    Hi M,
    Using PerformancePoint Dashboard Designer, you can create many kinds of reports for your dashboard. Examples of report types include analytic charts and grids, Excel Services reports, strategy maps, and many other kinds of reports.
    Please refer more information:
    http://technet.microsoft.com/en-us/library/ff806339(v=office.15).aspx
    http://office.microsoft.com/en-in/sharepoint-help/create-and-use-a-report-or-a-scorecard-HA102772329.aspx
    Among the kinds of report, you might be more interested in Excel Services reports, please refer to:
    http://technet.microsoft.com/en-us/library/ff724277(v=office.15).aspx
    Regards,
    Rebecca Tu
    TechNet Community Support

  • Chart and text items are not synchron

    hi all,
    i am a newbie in apex 4.0.
    i have two regions. the first shows a chart, based on pl/sql-code. second shows text items for possible filter an the current statement of the chart.
    when user clicks on a bar in the chart then
    1. i set the the first text item as filter,
    2. a pl/sql-code runs, build a sql statement, assign the sql statement string to the second text item and
    3. returns the statement for the chart.
    it works fine. the chart refresh. and the data i can see are correct.
    but the text items in the other region doesn't refresh.
    when i press "refresh"-button at browser level everything is fine. chart and text items fits together.
    what can I do to refresh all regions when the chart changes the sql-statment / User clicks?
    Is there any way to read out the current statement of a chart?
    thx in advance
    jogi
    Edited by: Jogi on 09.05.2011 12:31

    Bernd: the reason I asked about views is that you don't have any error messages. This might indicate that (a) you have no items in the view, or (b) there's something wrong with view-role-user assignment.
    To check for (a), please go to the published procurement catalog, and go to Views tab. Check that your View is Active. Click on your View ID link to display view details. You should see a list of characteristics assigned to your view in Assign Characteristics sub-tab (the list should not be blank!). Go to Assign Items sub-tab. Navigate in your schema to find items that are supposed to be assigned to your view. You should see "Yes" in the "Assigned" column for those products. If you don't, then you simply don't have any items in your view.
    Another thing I'd like you to check: when the user calls your procurement catalog for search, do you see the name of the catalog displayed just below the drop-down "Select Categories Hierarchically"?
    Cheers,
    Serguei

  • Any way to set color for value in chart and still filter out values (but retain colors)?

    Is there any way that I can hard code a color into a chart and still filter out values?
    I have 5 divisions, each with a specific color.  I have put them into a stacked column chart and it looks fine.  My issue arises when I try to filter out some of the divisions.  The colors do not stay with the specified divisions.
    Ex.)
      Div 1 = Red
      Div 2 = Green
      Div 3 = Black
    When I filter out Div 1, this is what I see:
    Div 2 = Red
    Div 3 = Green
    I have tried standard delivered filter panel, and check-boxes using CHART_1.setDataSelection( )
    It seems like the color hard coding in the "additional" properties of the chart are not tied to the value, but are determined by sort order.  Any help is greatly appreciated

    Hi,
    There is one Possibility bu not By chart .
    It will look like chart but will use Text box .
    Lets say you have 5 Divisions & 3 Key figures .
    Then You need 5 * 3 = 15 Text box .
    Arrange them in 5 columns and 3 rows type of view .
    now .
    set fix width for all .
    set the height & position by coding
    You need to set this type of code for filter selection also .

  • Report Designer - Chart and data

    Hi,
    I have a query section. In one of the cell, I have a chart. I have the data in other columns on the side of the chart. When I execute the report designer, I get the chart and the then the data below on the side. When I create a pdf, the data moves up to the side of the chart. I want the web view look like the pdf view where the data is on the side of the chart. Is it possible? Why is the web view and the pdf view different?
    Best regards,
    Jai

    Moved to BOE Admin forum

  • OBIEE Report and Dashboard development best practice

    Hi All,
    Is there any best practice available on OBIEE report and dashboard development? Any help would be appreciated.
    Thanks,
    RK

    http://forums.oracle.com/forums/thread.jspa?messageID=2718365
    this might help you
    Thanks

  • Safari, iMail, iTunes, and Dashboard won't open

    A week ago, Safari, iMail, iTunes, and Dashboard won't open but other applications will, like Mozilla, iPhoto, Word, Excel, etc. Does anyone have any ideas of how I can get Safari and the other programs to open? Thanks for any help you can offer.

    Hi, I'm replying to myself to add more information on my case. I wasted half my day yesterday trying to fix this, looking into forums and trying to talk to people about it and there it absolutely no answer. Yesterday I installed the programs necessary to sync my phone in my wife's macbook and nothing bad happened. So I'm guessing it isn't about the phone plugins I installed. I've tried to download combo updates but they crash as soon as I try to install them - I even tried to install a 10.4.10 update.
    This is the error message I get:
    Command: Installer
    Path: /Applications/Utilities/Installer.app/Contents/MacOS/Installer
    Parent: WindowServer [114]
    Version: 2.1.9 (104)
    Build Version: 36
    Project Name: Installer
    Source Version: 1040000
    PID: 603
    Thread: Unknown
    Link (dyld) error:
    Symbol not found: _WebCoreUnicodeDirectionFunction
    Referenced from: /System/Library/Frameworks/WebKit.framework/WebKit
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    /System/Library/Frameworks/WebKit.framework/WebKit
    I put part of in on google to check if there was anybody discussing anything related and someone suggested - bizarrely enough - updating adobe reader. I did it just in case and, of course, it didn't work. I repaired permissions a million times already, I rebooted in safe mode, I scaned the computer with apple jack, I verified the disk with diskutility - which showed nothing. I tried downloading an anti-virus (ClamXav), but I couldn't open it also, I trashed my prefs, I deleted all internet plugins, but still.... nothing. I'm about to quit and take it to the very expensive - yet reliable - authorized tech support apple has in Rio. Any ideas, anyone?

  • Templates for charts and other objects

    Hi, new to this group, and a newbie to Macs, too.
    When I do my own presentations, not relying on the templates of Keynote, I notice that when I insert a chart or any object, it looks so, what's the word? so bland and even unattractive.
    So kindly allow me three questions:
    First, how do I access the nice-looking charts and objects of the Keynote templates without having to open one up and cutting and pasting them on my presentation?
    Second, where do I find the textures that the chart templates use for background? In which folder are they stored?
    And third, which is, I suppose, a frequent plea, where can one find other templates? The ones available on the Internet aren't as well-composed as the bundled ones.
    Thanks in advance.

    1. You can't, the chart settings are built into each theme, there's no way to get them without opening a theme. One thing you COULD do though, is make a bunch of cool charts, and copy and paste them into a "holding" file that you open when you need it. Then you won't have to constantly make an empty file, create a table and copy and paste it. The other alternative, especially if you like one particular style and will likely use it most of the time, is to lock in the table style to your own file once you've used it on your own slide once. You can find that function under the Advanced menu.
    2. They aren't stored in a folder. With Keynote 1, Apple did provide you with a .key file that had chips of color or texture in it, but now they don't. You could create your own by making a bunch of objects, and then using the Copy Style functions in Keynote to copy the style of say, a colored bar in a chart, onto say, a square you just made in your new file.
    As for the templates found on the web being not as well composed as the Apple one's, I beg to differ. Have you seen Keynotepro or keynotethemepark? My stuff (Keynoteuser.com) isn't as snazzy or artistic (though I think it's more usefull in most cases for the business world than many of the Apple templates) the stuff the other sites are doing is up there in quality to Apple's. Keynotepro especially is churning out stuff that in my opinion is better than Apple's.

  • Horizontal Bar Chart and Overlaying Line Chart

    I am using SSRS 2008 and developing my reports in BIDS.
    I have a report with two data points. I want to chart the first as a bar (horizontal) chart and then the second as an overlaying line chart.
    I created both data series, originally, as a bar chart. I have clicked on the second series in the "Drop Data Fields Here" area and changed the chart to a line chart. When I do that, it changes both series to a line chart.
    However, if I use the column (vertical) chart for the first series, it will let me make the second one a line chart.
    Is this a limitation of SSRS 2008? Can I not have one data point be the horizontal bar chart and the second one a line chart?
    If so, are there any suggestions how to get around this?
    Thanks.

    Both charts for SSRS 2005/2008 are very limited when it comes to horizontal charts and are infact supporting only left-to-right bar charts, with no ability to combine them with other charting types (lines, areas, points etc.). For a SSRS charting solution that supports all types of charting type combinations in left-to-right and right-to-left horizontal fashion you can use Nevron Chart for SSRS - www.nevron.com. Besides a huge number of charting types and subtypes (most of which are not available in the MS Chart for SSRS 2008) it also provides better image quality in 2D and 3D modes, more settings, has support for rich text formatting in texts, has image filters, ability to customize via C# code and implements many more large and small charting related details.
    Best regards,
    Crank

  • Data and Dashboard Security using ROLES Variable in OBIEE 11g

    Hi all,
    I'm currently using OBIEE 11g. I'm wondering how to implement the security for data and dashboard in the 11g.
    Below is the sample of how the security matrix requirement when I use the 10g version. In 10g, we usually use GROUP (for the data filter in RPD) and WEBGROUPS (for dashboard objects) variables in my initialization block to read from database. As we have 2 different variables, it is possible to control security separately for data and dashboard.
    GROUP | Country
    G1 | US
    G2 | FR
    G3 | UK
    WEBGROUPS | Dashboard
    WG1 | D1
    WG2 | D1
    WG3 | D1
    WG1 | D2
    WG2 | D2
    WG1 | D3
    WG3 | D3
    WG3 | D4
    Now, in 11g, the recommendation is to use ROLES variable (for application role). So, how would I apply the required security matrix above in 11g using just ROLES variable? Do I still create G1, G2, G3, WG1, WG2, and WG3 as application roles then only use G1-3 in the RPD to filter the data and only use WG1-3 in the analytics to serve as webgroups?
    Any advice on this? Thank you very much.

    "...Could you elaborate more?"
    I mean that role creation and user->role assignment will be managed outside of to the obiee interface - whether that's via the database, LDAP, fmw etc.
    Webgroup creation and assignment is managed within the obiee interface and I think that has a lot of benefits - generally you have people responsible for shared folders and dashboard creation, so having them responsible for webgroups and presentation permissions is preferable for me.
    "are you saying that I use the role G1-3 only in the RPD, while using the role WG1-3"
    Yes .. I'm assuming you have something like
    G1 | US
    G2 | FR
    G3 | UK
    WG1 | Finance
    WG2 | Marketing
    WG3 | Sales
    Which becomes
    R1 | US
    R2 | FR
    R3 | UK
    R4 | Finance
    R5 | Marketing
    R6 | Sales
    And John belongs to R1 and R4, Fred belongs to R2 and R4 etc. So you would set your data filters against R1-R3 and use R4-R6 like webgroups in the presentation services.
    Regards,
    Robert

  • In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    yes.
    To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu.  Select the menu item "Hide ..."

Maybe you are looking for