Check Conversion Exists in SAP Query

Hi Experts,
In our SAP HCM, we can interchangebly use SAP pernr and Singapore NRIC in PERNR field. SAP has provided a utility to map Singapore NRIC with SAP number in the pernr field based on IT185.
SAP number can only been seen in Txn Code SE16. After displaying the results, click on
Settings > User parameters > Data Browser > Format > Check conversion exists.
On switching off this option, SAP number is displayed instead of NRIC.
When running Ad-hoc or SAP query, the system is displaying Singapore NRIC in the PERNR field. Our users want to have both the options so as to display NRIC and SAP number in this field.
I have checked, there is no 'Check Conversion Exists' function avaliable in SAP / Adhoc query.
Does anyone know, if it is possible to display SAP number in the PERNR field in query. Any help will be greatly appreciated. Thanks.
Rgds,
AJ

Hi, 
If it SAP query from infoset then you have to use action infotype and select pernr.
If it is standalone SAP adhoc Query, then create/ change the query to add table PA0001 and PA0185. Join it with pernr field, In the output select the pernr and NIRC number.
Good luck 
Thanks,
Amosha
 "Known is a drop & unknown is an OCEAN!"

Similar Messages

Issue with Infoset of sap query

Hi All,
There is an existing 'z' Sap query and the inofet is created using the data source 'Data retreival by program'(Data structure:BAPIEXPLOSIONLIST).
I got the requirement to add onemore radiobutton(for Costing Run) to the selection screen of exsiting query and when the radio button is clicked on, it should display two more fields (Costing Run name and Costing Run date).So,I have added the below lines in the existing Infoset.
1.Under the extras button and in data read program tab,I have added the below code for radio button and the two fields for selection.
PARAMETERS p_cstrun LIKE jest-inact RADIOBUTTON GROUP cost.
SELECT-OPTIONS sp_kaid FOR keko-kalaid MODIF ID s1.
SELECT-OPTIONS sp_kadt FOR keko-kaladat MODIF ID s1.
2.Under the extras button and in code tab and in at seletion-screen output,I have added the below logic to enable those fields dynamically.
LOOP AT SCREEN.
    IF p_CSTRUN EQ 'X' AND SCREEN-GROUP1 EQ 'S1'.
      screen-invisible = 0.
      screen-active = 1.
      MODIFY SCREEN.
      elseif p_CSTRUN NE 'X' AND SCREEN-GROUP1 EQ 'S1' .
      screen-invisible = 1.
      screen-active = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
After adding this,the existing selection-screen format has been changed.Please look at the below changes.
->Actually,there are two blocks in the existing screen with block titles.Now they are replaced with some different text
->And one more block for output format and under that the layout field selection was there in previous selection screen.Now this layout field text is changed to 'Sap Listviewer' and some butto has also come additionaly in the output format.
How to retreive the old selection-screen with previous texts and formats.
Can any one suggest to resolve the issue?
Thanks in advance!!
Best Regards,
Mounika

This is the complete code of selection-screen
SELECTION-SCREEN BEGIN OF BLOCK issel
                          WITH FRAME TITLE text-S01.
SELECTION-SCREEN SKIP.
PARAMETERS p_cstcur LIKE jest-inact USER-COMMAND ex DEFAULT 'X' RADIOBUTTON GROUP cost .
PARAMETERS p_cstfut LIKE jest-inact RADIOBUTTON GROUP cost.
PARAMETERS p_cstprv LIKE jest-inact RADIOBUTTON GROUP cost.
*Begin of Insert CBDK972000
PARAMETERS p_cstrun LIKE jest-inact RADIOBUTTON GROUP cost.
SELECT-OPTIONS sp_kaid FOR keko-kalaid MODIF ID s1.
SELECT-OPTIONS sp_kadt FOR keko-kaladat MODIF ID s1.
*End of Insert CBDK97200
SELECTION-SCREEN SKIP.
PARAMETERS p_niv_g LIKE jest-inact DEFAULT 'X'.
PARAMETERS p_niv_a LIKE jest-inact DEFAULT ''.
PARAMETERS p_niv_f LIKE jest-inact DEFAULT ''.
SELECT-OPTIONS sp_disgr FOR marc-disgr MEMORY ID lev NO-DISPLAY.
SELECTION-SCREEN SKIP.
PARAMETERS p_newfil LIKE jest-inact DEFAULT ''.
SELECTION-SCREEN END OF BLOCK issel.
SELECTION-SCREEN BEGIN OF BLOCK csel
                          WITH FRAME TITLE text-s02.
SELECT-OPTIONS sp_mtart FOR mara-mtart OBLIGATORY
NO INTERVALS NO-EXTENSION MEMORY ID mta.
SELECT-OPTIONS sp_werks FOR mbew-bwkey OBLIGATORY
NO INTERVALS NO-EXTENSION MEMORY ID bwk.
SELECT-OPTIONS sp_matnr FOR mara-matnr MEMORY ID mat.
SELECTION-SCREEN END OF BLOCK csel.

How to find the report for the SAP query (Query exists in table AQLQCAT)

Hello Experts,
I need to find the tables used in the SAP Query but i don't have access to transaction SQ01,SQ02 and SQ03 to check the same.
Therefore i checked table AQLQCAT and got the SAP Queries in the system. Then searched for the reports that would have been generated for the same passing AQusergroupquery name* in transaction SE38.
But unfortunately the program does not exists for the given paramenter.
Could you please let me know how to get the report name for the SAP Query.
Secondly please suggest any other way of checking the tables used in the SAP Query.
Also the table name from where i can download the SAP Queries.
Thanks in advance.
Regards,
Rahul Sinha

I suggest you a simple method.
Execute the query. When the selection screen is showed, go to menu and click to SYSTEM->STATUS.
Check the program name and double click it to access the program code.
Search for tables or functions into the source code in order to understand where data are taken.
If you do not find anything , go to the program atttribute and check for logic database, sometimes they are used....
Best regards.

Modify existing SAP Query / Quickview

Hello,
Greetings!
We have a requirement to modify an existing SAP Query. This query was created much earlier by a user who is no longer present.
We have the query name, user group, and the program for the query. This query, we assume was created using tcode SQVI.
However, in tcode SQVI, we cannot see the query as we have not created it.
I understand that this is because the quick view has not been converted to query.
I have referred:
SQVI - Quick view modification
http://wiki.sdn.sap.com/wiki/display/ABAP/QuickViewer
In tcode SQ01, we are unable to see the query, as we get an error that the user group does not exist.
In table AQLTQ, we get an entry for the query and the user group. But the user group does not exist in tcode SQ03 as well.
In this case, how to we convert the quickview to query? Or is there any other way to edit the exisitng quickview/query?
Kindly help.
Best Regards,
Smruthi

Hello Suhas,
Thank you for your reply.
I checked in both the tables.
There exists an entry only in AQLQCAT(Local or Client-dependent queries). We now have the infoset as well, along with the user group and the query.
When I check for the infoset in SQ02, I get an error, "Infoset <infoset name> not created"
The user group is the same as that found in table AQLTQ.
Best Regards,
Smruthi

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO AS T0 LEFT OUTER JOIN
 VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
 OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
 VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM ODPO T0 LEFT OUTER JOIN
 VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
 OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
 VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

Check box in SAP Query selection screen

I want to keep 2 check box in SAP Query selection screen.
could you please tell me any one.
regards,
kumar

Hi Vijay,
If these check boxes are the fields in the table you are using then you can do it in SQ01, otherwise you may required to make the changes in the standard code generated for that query.
You can find the name of the generated program of the query when you execute the query.
Reward points if useful.
Regards,
Atish

Check whether master record conversions exist

Dear All,
I have copied the requests from developement server to quality server for SD IMG configrations.
When i am doing consistency check in Developement server there is no error.
However when i check the same in quality server I am getting the following error.
Check whether master record conversions exist
Dist. channel is missing for condition conversion 1000 10
Dist. channel missing for customer/material conversion 1000 10
Check whether master record conversions exist
Division is missing for condition conversion 1000 10
Division missing for customer conversion 1000 10
Can some body help me to solve this problem.This very urgent and will really appreciate your timely support.
Thanking you,
Best regards,
R.Srinivasan
Check whether master record conversions exist
Division is missing for condition conversion 1000 10
Division missing for customer conversion 1000 10

Experiencing the same problem also.
Right now, i'm re transporting the DEV config for Define Dist Channel, Define Division, Assign Dist channel to sales org, Assign Division to sales org, and Set up sales area. I hope once i transport them again in this order, the issue will be resolved is QAS.
Anyone know what i should do?

Currency conversion in SAP Query

Hi,
We need to develop a SAP query(SQ01) in which we have to pull two fields maintained in sales order (sales order net value & PO net value(ie.z field)).
These fields values may be maintained in different currencies.
So need to know how to convert the PO net currency value as of sales order net value in SAP query as a new column (or how to convert any currency to USD in SAP Query).
This will help user to get comparison in output.
Please help.
-- Amit

Hi again
The point 2 is still not clear for me..
1. Should I put in the source code (256 lines) of the function module here, or should I just put in a reference to the Function module like:
FM convert_to_local_currency;
2. Where should I put in the import variables you refer to?
3. When I push "single test" of the Function module I get these import parameters:
CLIENT                          210
DATE
FOREIGN_AMOUNT
FOREIGN_CURRENCY
LOCAL_CURRENCY
RATE                            0
TYPE_OF_RATE                    M
READ_TCURR                      X
Is this the import parameters you are reffering to?
Best regards
Ellen

Could anyone provide the complete manual of SAP Query Creation

Hi,
Now I am learning to create SAP Query.
I viewed many questions and answers about SAP Query.
Some mentioned this,and some did that...
Could anyone provide a complete manual of SAP Query Creation for developers.
I can create SAP Queries step by step with it.

http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
useful
http://www.erpgenie.com/abap/code/abap47.htm
regards,
Prabhu
reward if it is helpful

SAP Query - Adding new fields to SAP query

Hi experts,
I got an issue to work on SAP query.
I have Transaction code and need to know the infoset to add additional two fields to the existing output.
Please let me know how to find infoset/ Query for the specfic transaction and how to add fields.
Regards,
Venkata

first check the transaction code given to you.. if it is report transaction (check using SE93), then get the report name for example AQFKTES_SGS_IV==MMIV0003======, then after aQFK,TES_SGS_IV woulbe be your user group and MMIV0003 would be your query. Now go to SQ03 with the user group (you need to check the query areas also which would be Environment---> query areas) because some can be client depended some can be just cross client. and then go to sq01 from user group. It will direct you to the queries of the user group you mentioned in SQ03. Now you should be able to find the query you are looking for. The infoset will also be displayed linked to the query. The infoset can be displayed via SQ02 transaction.
If it is parameter transaction code, you need to check the parameter values to find the query details. Rest of the approach is same as mentioned above.

Transform sap query into transaction

hi!
my question is not related to mm but also not to other forums in this site.
i'm trying to transform sap query into transaction using se93 transaction.
i just learing sap in a class and we use an old version of sap.
user group name: ofer6
infoset name: ofer9
query name: ofer8
all created in global area
when i enter se93 i write t-code ZSTART and press "create".
then i choose: "transaction with parameters" in the popup window.
in the second screen i write the transaction ZSTART again.
i mark "skip initial screen" and "inherit gui attributes"
at the bottom of the page in "default values" i use the following:
D_SREPOVARI-EXTDREPORT     OFER8
D_SREPOVARI-REPORT          OFER6 G
D_SREPOVARI-REPORTTYPE     AQ
when i press enter i get messages:
transaction ZSTART does not exist
Screen 0000 of program does not exist
The field D_SREPOVARI-REPORTTYPE does not exist on the called screen
The field D_SREPOVARI-REPORT does not exist on the called screen

Hi,
Please check the link below:
http://www.freesaptutorial.com/how-to-create-transaction-code-in-sap-using-se93/
Hope this will be helpful to you.
Thanks,
Neeraj

Sap query iview error

Hi there!
I have a sap query iview in the portal that should display a query in CRM (build with SQ01). The query in the backend is fine, but I get this error message in the portal.
"Error in Source. Message not available"
I have double-checked that the connection parameters of the sap query iview are OK, also I have run a DQE connection test on the system that was(see below) also OK.
Any thoughts on this?
Thanks in advance
-fab
p.s. I reward points generously
Test Connection through the DQE
Test Details:
The test consists of the following steps:
1. Checks the existence of a backend admin user ID/password in the system properties.
2. Checks the existence of a default alias for the system.
3. Checks the DQE connection.
Results
1. Backend admin user ID and password exist in the system properties.
2. Default alias of the system exists.
3. DQE connection successful. If you continue to experience problems, verify the DQE admin user ID and password properties for this system object.

Thanks for the help Michael. Here is the xml file, I have also sent it to your email address.
Cheers,
faB
- <GenericCreator author="XML Creator" version="XML Automatic Creation" mode="clean,execute" report.level="success" createMode="1" default.locale="en" ignore="false">
<Property name="parent1" value="pcd:portal_content/XXX/XXXXXX/IVIEWS" />
- <Context name="qtf" objectClass="com.sapportals.portal.iview" create_as="0" template="par:/applications/com.sap.pct.srv.portaldataviewer/components/SAPQueryTemplate" parent="$">
- <Attributes>
- <Attribute name="com.sap.portal.private.iview.PropertiesUrl" type="string">
<AttributeValue value="pcd:com.sap.portal.system/applications/com.sap.pct.srv.portaldataviewer/components/SAPQueryTemplate" />
</Attribute>
- <Attribute name="PDVParameterQUERY_WORKSPACE" type="string">
<AttributeValue value="G" />
</Attribute>
- <Attribute name="PDVParameterQUERY_VARIANT" type="string">
<AttributeValue value="TEST" />
- <Attribute name="personalization" type="string">
<AttributeValue value="NO_DIALOG" />
</Attribute>
</Attribute>
- <Attribute name="PDVParameterQUERY_NAME" type="string">
<AttributeValue value="ZQ_ECCSPO_01" />
</Attribute>
- <Attribute name="PDVParameterQUERY_USERGROUP" type="string">
<AttributeValue value="ECCSPO" />
</Attribute>
- <Attribute name="PDVParameterQUERY_CREATE_SELTAB_FM" type="string">
<AttributeValue value="" />
- <Attribute name="personalization" type="string">
<AttributeValue value="NO_DIALOG" />
</Attribute>
</Attribute>
- <Attribute name="com.sap.portal.iview.MainObject" type="string">
<AttributeValue value="" />
</Attribute>
- <Attribute name="SystemIdentifier" type="string">
<AttributeValue value="SAP_CRM" />
</Attribute>
</Attributes>
</Context>
</GenericCreator>

Hi sap query doubt

where shud we add two additional fields in SAP query ? actually i am not able to locate the query but i have the program whch is generated along it . so in whch section of the query i shud write the logic to get two additional fields ?

Hi,
Already there are some Infosets (tables) defined in that query.
Go to that infosets and add extra fields which are there in those tables
or add extra infoset(table) and link it to the existing table with the key, then add that table field.
No need to write the code.
Only thing is to select that field on to the Selection screen or on to the output is required.
See the help:
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
use either SQ02 ans SQ01
or SQVI tr code
for more information please go thru this url:
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
http://goldenink.com/abap/sap_query.html
Please check this PDF document (starting page 352) perhaps it will help u.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
check the below link will be helpful for u
Tutorial on SQVI
once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
reward if useful
regards,
Anji

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)

Cannot implicitly convert type 'System.Data.SqlClient.SqlDataReader' to 'Microsoft.ReportingServices.DataProcessing.IDataReader'. An explicit conversion exists (are you missing a cast?)
I am getting the above error in c#. Please help me. Thanks in advance
public IDataReader ExecuteReader(CommandBehavior behavior)
string query = "select * from Sales.Store";
SqlConnection readerconn = new SqlConnection("Data Source=localhost;Initial Catalog=AdventureWorks2000;Integrated Security=SSPI");
SqlCommand readercmd = new SqlCommand(query);
try
readerconn.Open();
readercmd = readerconn.CreateCommand();
readercmd.CommandText = query;
readercmd.CommandType = System.Data.CommandType.Text;
SqlDataReader TestReader = readercmd.ExecuteReader();
return TestReader; //Getting error at this line
readerconn.Close();
catch (Exception e)
throw new Exception(e.Message);

Hi,
Please firstly take a look at the documentation:
IDbCommand.ExecuteReader
Method
Users do not create an instance of a
DataReader class directly. Instead, they obtain the
DataReader through the
ExecuteReader method of the Command object. Therefore, you should mark
DataReader constructors as internal.
You need to use this method to get the IDataReader object, all the IDbCommand and IDataReader are in the Microsoft.ReportingServices.DataProcessing namespace. There's another IDataReader object which is in System.Data namespace, but they're actually two different
objects, that's why you got the exception.
For how to properly implement this Microsoft.ReportingServices.DataProcessing.IDataReader, please check this documentation:
Implementing a DataReader Class for a Data Processing Extension
It also provides code samples there.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Diff. bet ABAP and SAP Query

HI
Anybody can explain in detail about ABAP and SAP Query.....
And tell me what is the main diff. bet ABAP and SAP Query...
Regards
S.Baskaran

SAP Query
Purpose
The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
Features
SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
All the data required by users for their lists can be selected from any SAP table created by the customer.
To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
ABAP Query, as far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly.
Check out these links.
http://help.sap.com/saphelp_46c/helpdata/en/35/26b413afab52b9e10000009b38f974/content.htm
http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Introduction.asp
Step-by-step guide for creating ABAP query
http://www.sappoint.com/abap/ab4query.pdf
ABAP query is mostly used by functional consultants.
Kindly reward points by clicking the star on the left of reply,if it helps.Kindly close your previous threads if your problem is solved and reward points for helpful answers.
Don't forget to reward if useful...

Check Conversion Exists in SAP Query

Similar Messages

Maybe you are looking for