Check list document to get my scenario certified by SAP

Does someone have standard documents that state rules to fllow while developing PI scenarios?
this is basically to get my project certified by SAP.. what are the things SAP looks for before certifying PI scenarios created by me?
thanks in advance.

Hi ,
bewlo naming convention document provided by SAP,in my project also i am taking this document as the reference.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40a66d0e-fe5e-2c10-8a85-e418b59ab36a
coming to designing optimal solution,it depends on how you avoid going for XSLT Mappings,JAVA Mapping(Perfromace issues)
How you implement the mappiong with less number of function using effectively,
how you willa void Integration Process in Project and if its required how to use the steps provided SAP in ccBPM,some of the steps will take more resources,I dont have specified link for best practices guide,but search in sdn you will find it.
Regards,
Raj

Similar Messages

Check list document

Hi friends,
Can any one Send me some of Code review check list points documents for reports,interfaces,forms.
So that i can use these format in my project , since we don't have a standard check list formats.
Points are sure....
Regards,
Anil.

Hi ,
bewlo naming convention document provided by SAP,in my project also i am taking this document as the reference.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/40a66d0e-fe5e-2c10-8a85-e418b59ab36a
coming to designing optimal solution,it depends on how you avoid going for XSLT Mappings,JAVA Mapping(Perfromace issues)
How you implement the mappiong with less number of function using effectively,
how you willa void Integration Process in Project and if its required how to use the steps provided SAP in ccBPM,some of the steps will take more resources,I dont have specified link for best practices guide,but search in sdn you will find it.
Regards,
Raj

Check list documents

hello sap sd gurus,
could any one forward me some of the sap sd functional checklist and the questions to be asked since i am going onsite for KT.
points will be rewarded
Thanks
Edie
[email protected]

You need to know the process flow, document flow, sales doc types, Item categories, S.lines used for the processes
Good understanding about pricing, the significance of each condition type needs to be understood.
Some examples of issues which the team had faced earlier, with solutions and implications.
The way through which the transactions are executed, either through IDOCs, or custom made programs, or background jobs etc
Customisations (New developments) made for the project

C# Checked List Box Checked Values only

How can I loop through a checked list box and get the values for the checked items only?

List<CheckedListBox> cbList = new List<CheckedListBox>();foreach (var item in checkedListBox.CheckedItems)
// Loops checked checkedListBox items cbList.Add(item);
}

Audit Check List

Does anyone have any idea what criteria should be included in "EssBase Performance Audit Check List " that would get the most representative sample possible errors of the developer.
Eg for the development of rules
- All dimensions in a fixed direction perechisliny
- Creation of data block is manageable
- The memory settings are optimal
and so on.

Hi
Full example and more* u can find here ..._
Re: Dependent drop down lists in forms 6i
Hope this helps...
Regards,
Amatu Allah.

Base on invoice list document no. how to get MATKL field

my question is regardsing, based on the provided invoice list document number, how to get MATKL (merchadise category) field from MARA table or other table. Thanks

In the invoice document if you have the material number, MATNR, then take that and using that you can get the MATKL from the MARA table.
Regards,
Ravi
Note : Please mark all the helpful answers

Getting error Failed to check in document from ODC to UCM 11g

Hi:
I am getting the below error while trying to commit image from ODC running on windows to UCM 11g running on linux
SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
     at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
     at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
     at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
     at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
     at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
     at com.jniwrapper.Callback.enterPoint(SourceFile:222)
     at com.jniwrapper.Function.invokeCFunc(Native Method)
     at com.jniwrapper.FunctionCall.a(SourceFile:126)
     at com.jniwrapper.FunctionCall.call(SourceFile:34)
     at com.jniwrapper.Function.invoke(SourceFile:188)
     at com.jniwrapper.Function.invoke(SourceFile:212)
     at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
Can anyone help me to correct this error?
Thanks & Regards,
Raj
Edited by: user13270764 on Dec 8, 2010 10:59 PM

Raj,
Are you using the 11g commit driver for ODC. Do you have the URL in the correct form:
http://Instance/web root//idcplg&AUTH=INTERNET
Thanks
Data_Bitz

How can i get a drop down menu or check list control

i want to give the user a choice between 7 options on the front panel. i want either a check list or drop down menu.thanks

You can use any of the ring controls to generate a drop down list. The ring controls are found on the Controls >> Ring & Enum palette. You program the drop down items the same way with any of these controls. Type the first drop down item on the control. Right click on the control and select "add item after". The controls text field will blank out and you can enter your second item. Repeat for every item on the list you need to generate. After you are done entering items, click on the control with the application tool and you will see a drop down menu of all the items you entered.

Controlling Document Not Getting Posted

Dear All,
We have a peculiar scenario of Controlling Document not getting posted. Any pointers on wat could be the issue will be highly helpful.
Scenario:
We have an interface which posts an accounting document.
Dr. Expense
Cr. Balance Sheet.
The Cost Center is supplied thru the interface and FI document and Profit Center Document is posted without any issues. However, CO document is not generated, not sure wat could be the issue. We have performed the basic checks. Also, for the same expense account, we observe some postings have gone into CO where are some didnt'. The difference between documents posted with corresponding CO and documents without corrsponding CO posting is only the "Transaction Key". When we maintain blank Transaction key.. the system posts CO document, when transaction key is "WRX" for that specific GL the system doesn't post.
Not sure why Standard SAP behaves like that. Please advice wat items i need to check to resolve
this.
regards
Diwakar

Hello,
Make sure in OBYC, for key WRX, you have maintained the GL accounts.
Regards,
Ravi

COPA Documents not getting posted - Doc with unauthorized busi.trans SD00

Dear Experts,
COPA Documents are not getting posted, although billing /accounting documents are getting posted
We are getting the below error message, when KE4ST is executed
Kindly share your inputs for this issue
Document with unauthorized business transaction "SD00"
Message no. KE/AD604
Diagnosis
Document 6000000026 cannot be transferred to Profitability Analysis (CO-PA) because the business transaction"SD00'"(Billing document) is not profit-related.
System Response
The document is not posted to CO-PA.
Procedure
If you decide that the document does contain data relevant to CO-PA and that it therefore should be posted to CO-PA, change your Customizing settings accordingly. Otherwise you can ignore this message.
Advance Thanks,
Sanjai

Hi,
   1. First please check if COPA is active in the system i.e. tcode KEKE
   2. Then check if operating concern is active in tcode KEA0
   3. If so then check if billing document has an account assignment to PA segment. If not then maybe you have changed the account assignment in OKC9.
   4. If all the 3 conditions above are satisfied then you need to check if this is a made-to-order scenario (MTO). A made-to-order scenario can be identified in COPA in that the billing doc will have an account assignment to a sales order in addition to a
PA segment (field vbap-kzvbr = 'E' and vbap-vbelv = sales order no).
If the above conditions are satisfied then from a COPA point of view it is a MTO. In this case the invoice will be assigned to the sales order and will not be directly transferred to COPA. With the order settlement the costs and the revenues (invoice) will then be posted to COPA.
regards
Waman

Check list for testing

Hello everyone,
I am trying to put a document together to have a check list for integration testing. does anybody have anything like this that can share? Or any tips of what steps should be taken in consideration to complete integration testing?
Thank you for your help!

Hi,
1) Integration testing validate end to end business scenarios including interfaces. Use converted data (if applicable and based on the data strategy). Can be executed in multiple cycles based on the implementation strategy
2) Scenario-based testing across process areas
May include multiple t-codes, or equivalent units in a string or sequence
3) Testing across modules
4) Primarily deals with cross-application chains that directly or potentially impact each other
5) Consists mostly of positive testing with selected negative testing
6) Executed in the Quality Assurance test environment
7) Integration Testing will be performed in multiple cycles
8) Next cycle should not begin if critical discrepancies have not been dispositioned. All Integration test discrepancies must be closed by the end of the last integration test cycle
9) A discrepancy can be dispositioned if:
Retest Passes or
Workaround approved or
Alternate resolution approved
Regards
R. Senthil Mareeswaran.

Use of Configuring "Stochastic Check of Documents"

Hi All,
I have a scenario I need to change the Invoice workflow at runtime based on some invoice document value......
For this I have found a BADI BBP_STOCH_CUST_BADI.... this gets triggered only when we Configure "Define Stochastic Check of Documents" in SPRO Supplier Relationship Management -> SRM Server -> Cross Application Basci Settings ->SAP Business Workflow -> Define Stochastic Check of Documents....
This says that using this configuration you can change the approval workflow from standard one to the anyother workflow....Can anybody jus give focus when exactly this step can be configured so that I can make use of BADI?
Or can suggest any other BADI which can be used to change the workflow based on the one of the invoice document value?
Thanks In advance.
Yaseen M

The flag indicates whether field inserted in the database is to be filled with initial values. The initial value used depends on the data type of the field. I.e. type n(2) is '00'.
When you create a table, all fields of the table can be defined as NOT NULL and filled with an initial value. The same applies when converting the table. Only when new fields are added or inserted, are these filled with initial values. An exception is key fields. These are always filled automatically with initial values.

Check in Document: Kpro Screen Help

HI All,
I just installed SAP content server 6.40. Everything is green and running in CSADMIN so I think it is working correctly. I tried to test it by checking in a document in CV01N, but I get stuck when I try to check it in. I click "Check in Original" and a screen pops up asking me to choose the Storage Category. My content server does not show up in the list. How do I get it to show up so I can check a document in?
Thank you,
Shelby

Hi,
Create content strorage category in OACT. Once it is done, it will appear in CV01N while saving original.
Anirudh,

BAPI/BAdI/OSS notes for PRT measuring.document auto.update -REM scenario

Dear Forum members,
In a REM scenario how to pull the PRT's assigned to the individual operation in the routing to the planned order.
(In my understanding if we carry out a elad time scheduling we get the operation deatils along with the timings under the detailed
planning tab and we can see the component's list)
Is there any OSS notes/BAdI/BAPI which addresses the measuring document update automatically as per the confirmation
quantity made in a REM scenario.
Eg: If the confirmation quantity is for 100,then whatever the PRT(equipment category)linked to the routing should get updated
automatically for 100 quantity,(the measuring document should get generated for an usage value as 100).
Please give your suggestions and input on this concept.
Regards
S Mangalraj

Hi Mangal ,
What is your exact requirement and why are you using PRT as equipment ?
You can use PRT as Material and consume in order if required . Also create document in CV01N and assign in BOM as
component with Document category.
Regards,
Jayavimal
Edited by: jaya vimal on Jun 18, 2010 2:08 PM

QA Check List

Hi All,
Can any one help me to prepare QA Check List
Idea behind this is before submitting for review what are the things we need to check
Ex:
1) For unit testing what are the steps we need to chek
2) Before proposing transport requests what are the steps we need check to get transports success full.
Just i need subject line on what aspects we can prepare QA Check List.( Like mentioned above Unit testing, transpotation... etc
Thanks,
Kishore

Dear Kishore,
Some tips are mentioned below.
Unit testing:
     Make sure that all the objects are already tested in the Development system by the developers.
     Load all the relevant Masters before loading the transaction Data.
     Take a snap shot data of production server and load it in QA server.
     Prepare the test case documents based on the Production data
Transport Requests:
     Break the complex transport requests into multiple simple requests. for example if you have a data
     flow from Datasource to Multiprovider and reports. Break them into 2 or 3 requests to avoid memory
     related issues.
    Always import the dependent objects requests first to avoid import errors
   Prepare a transport request log and mark the sequence of transport & dependencies
   Analize each and every request log after import is completed.
   Manually check whether all the objects are properly imported or not.
Hope this helps to prepare your QA related activities.
Regards,
Sreenivas.

Check list document to get my scenario certified by SAP

Similar Messages

Maybe you are looking for