Check Price and Availability: is BAdI a must to fetch customer?

Hi,
While running the app Check Price and Availability, the screen (see the attachment) displays. Do I have to implement the BAdI BADI_SRA016_USR_TO_CUSTOMER to fetch customers? At the current stage, the user's access to the customer list are not limited and all customers should be accessible. How can I configure it?
Best regards,
ts

Hi TS,
You have to follow the Configuration Tasks maintained in APP Implementation.
Configuration Tasks
To enable Check Price and Availability, perform these configuration tasks:
Map 0105 communication type for the employee PERNR to the system user ID.
Enable the SRA016_PRICE_AVAIL_SRV SICF Services for the Gateway and SD_PRAV_MON SICF Services for UI5.
Call transaction SIMGH to open the Check Price and Availability node to configure user information with the Sales Order Document type and Price Condition type in the SRA016_T_CONFIG table.
Implement the following BAdIs:
BAdI: Fetch CustomersYou can use this BAdI to fetch a list of customers associated with a specific employee.
BAdI: Retrieve Product ImageYou can use this BAdI to retrieve the image of a product.
Please double check these Config Tasks.
You should implement the badi to fetch Customers associated with a specific employee
You Can check this link for all the fiori Apps related BAdi s to implement
SAP Fiori - BAdI quick reference
Regards,
Venu

Similar Messages

Check price and availability shows no data

Dear Experts,
In the Check price and availability app, im trying to check the availability of a material on a particular date.
Issue 1:
The available stock quantity for material 953 is 260. There is no availability check maintained in material master(KP- no check)
Say for eg, 29th may and quantity as 10 items for material 953, the app displays data as below. How is the estimated delivery date calculated as i ahve not maintained any planned delivery date in MMR.
But when i check for this material 953 or 954 or 2390 or any other material for date 27th may or 29th may, it says stock is not available though the
physical stock is listed for 260 pcs as below.
Issue 2:
The available stock of material 953 is only 260. when I check for 1000 quantities on 30th May, the system must say, stock is not available
But however the app displays stock is available with the estimated delivery date. Im unable to find the cause of this output.
Please guide me how to sort the issue.
Please help as this issue is urgent.
Thanks & Regards
Dhinesh
Message was edited by: Michael Appleby

Hi Dhinesh
I am Also facing this problem from long back. And we updated all the Patch level but i didnt get the solution.
Please Share the Info if you find the Solution for this issue.
Regards
Prasanth SV

Pricing and Availability Screen in OM

Hi Gurus,
If I open pricing and availability screen in order management, Input item number, clicked on "Price and Availability" button system is giving below error message:
Note:
ONT_INLINE_CUSTOMER (TEXT=No APS instance defined. Set APS instance and run collection.
As per oracle docs, I have done all setups correctly but unable to trace out this error.
Please advise If i want to see/ use this screen without above error, what setups do i need to complete?
Thanks
AK

Please check the below metalink note
Pricing And Availability Error: ONT_INLINE_CUSTOMER No APS Instance Defined. [ID 343820.1]
Thanks
Pradeep
<edited by moderator - all possible document text erased, leaving just the document ID as the appropriate reply>

MRP and Availability check clarification

while browsing the forum, many experts here mentioned in old threads that MRP and availability check are two different (independent) concepts. I am really confused on this one. let me put my understanding here and plz experts help me if I am wrong with a figurative explanation, so that will be easy for understanding.
Assume this is the scenario as of today.
Plant stock for material x u2013 100
Reservations for material x u2013 70
Incoming receipts for material x u2013 50
So net stock = 100 + 50 -70 = 80
sales order arrived for material x u2013 100 and availability check is done. Results of availability check says 80 can be confirmed and 20 can be confirmed on later date.Transfer of requirement for quantity 20 is done to MRP. Mrp runs and creates planned order for 20.
In the availability check config ovz9 if I say donu2019t consider reservations, then when availability check is done for 100 quantities..system will confirm 100 because available stock according to system will be 100+50 = 150. So transfer or requirements are not sent to mrp.
So isnu2019t mrp run directly dependent on availability check?

925,
sales order arrived for material x u2013 100 and availability check is done. Results of availability check says 80 can be confirmed and 20 can be confirmed on later date. Transfer of requirement for quantity 20 is done to MRP
No. 100 pcs requirements are passed to MRP.
In the availability check config ovz9 if I say donu2019t consider reservations, then when availability check is done for 100 quantities..system will confirm 100 because available stock according to system will be 100+50 = 150. So transfer or requirements are not sent to MRP.
No, 100 pieces requirement are passed to MRP.
This behavior depends upon how your 'transfer of requirements' is configured, which is an SD setting. Normally, unless the fix date qty field is set in the sales order, the entire 100 pc requirement is passed to MRP in all cases. The assumption is that you have accepted the sales order and will 'some day' need to issue and sell the parts. You need to begin planning for this event now.
When MRP subsequently runs, it will net out the supply elements (stock and inbound reservations) and will from this calculation determine how much needs to be built. It then proposes a solution (planned order or purchase req).
ATP check seldom has much impact on MRP. You are correct in realizing that the ATP check must be consistent with MRP and with your chosen MRP strategies, in order to provide an end-to-end business process that is logical and meets all business requirements. However, in SAP these two functions are separate.
Best Regards,
DB49

Not able to query the price of PTO model through Pricing and availability

Hi all,
I book an order for PTO model through OM, i get the prices displayed,
if i query the same model through Pricing and availability form, to know the price, there is no item found in the LOV
The same model in istore, shows no prices in the catalogs.
What might be the reason??
Regards,
PRasad

I think this could be because the configurations are created and priced dynamically at the time of order entry.

Error in va01 for transfer of reeqirement and availability check

hi every one when i have done TOR and availabilty check configuration it is not reflecting in va01 can any one help out with configuration step by step

HI
Kindly check the Google with Same text so you can find out so many documents which is related to Availability Check & TOR
Coming to your Question , try to check the Schedule line Category (VOV6) , you need to TICK the Field *"Availability" * Requirement/Assembly"*
and also kindly check the Below
link [Availability Check (ATP) and Transfer of Requirement (TOR)|http://wiki.sdn.sap.com/wiki/display/ERPLO/AvailabilityCheck(ATP)andTransferofRequirement+(TOR)]
[Available to Promise (ATP)|http://wiki.sdn.sap.com/wiki/display/ERPLO/AvailabletoPromise+(ATP)]
Regards,
Prasanna

I recently moved to USA from Canada. I have not changed my apple id but I have changed my phone and computer. Is there a way to retrieve my purchased music via iTunes? I checked what was available to download and only got a few digital booklets.

I recently moved to USA from Canada. I have not changed my apple id but I have changed my phone and computer. Is there a way to retrieve my purchased music via iTunes? I checked what was available to download and only got a few digital booklets.

Most Windows users don't.
Purchase an external hard drive and use the backup software that comes with it to backup files from your computer.
Buy TouchCopy and install it on your new computer, connect your old iPod and transfer your songs to your computer.

BSOD with both Kernal Security Check Error and Bad Pool Header.

All -
I have a HP DV7 laptop with Windows 8.1. It has BSOD with both Kernal Security Check Error and Bad Pool Header.
Despite doing all the built in HP tests, there is nothing. Using an Anker HardDrive Dock results in the identical errors on another machine.
Bottom line, even if I could see the DMP files (which I cannot); because the machine fails to boot, there are no files to be copied.
I have tried various AIO and UEFI disks and USB, and the laptop NEVER accepts the PREINSTALL environment. Being unable to use the Anker has never happened. I seem completely locked out of the drive. Any suggestions? Thx.
Bruce A Ades

Hi Texas_Bruiser
Some required details are needed for us to help you.
Ensure that the BIOS/UEFI has been configured to allow boot from DVD/CD or USB.
When you attempted to boot into PREINSTALL environment (PE) by using disks or USB, we need more details about error message or what happened?
If your computer cannot even boot into Windows PE by using installation media, we suggest you check if memory and other hardware are works properly on this computer. Also try to plug this hard disk on other computer as data volume, see if the hard disk works.
Regards
D. Wu

Different between Availability Check 02 and CH

Hi all,
what is the different using Availability check mode "02" and "CH" in MRP 3 view??
maybe is there an example to check the different for using those 2 mode??
regards,
MARUFAT

>
marufat wrote:
> Hi all,
>
> what is the different using Availability check mode "02" and "CH" in MRP 3 view??
> maybe is there an example to check the different for using those 2 mode??
>
> regards,
> MARUFAT
Marufat,
You can check differrences with respect to the scope of check based on the combination of Checking group and Checking rule.
Normally checking rule would be constant for an application, example for PPOrders when availability is checked it would take the checking rules from what is defined for that plant and order type in OPJK and for every component based on the checking group assigned to it in MRP3 view. The scope of change you can see in OPJJ transaction.
Regards,
Prasobh

Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

Hello everybody,
Can help anyone to resolve my problem.
I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4 When I disconect AC power and remove battery and connect again, I see this message on screen:
"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Press Esc to continue or F1 to enter Setup"
Is this a system board problem or CMOS battery problem ?
Thank you

Hello and welcome,
It's probably (hopefully) just the CMOS battery. The easiest way to find out is to just replace that battery.
Page 85 of the Hardware Maintenance Manual:
Hardware Maintenance Manual
Here's an example of the battery. I'm not recommending (or not) this vendor:
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

I have a box that will not go away, it says, "To open JavaApplication, you need to install a Java SE 6 runtime. Would you like to check for and install one? If i push not now, it keeps popping up, if I push install, it says it's not available, help.

I have a dialogue box that will not go away and it seems to have started when I upgraded to Mt. Lion. the box says, "To open JavaApplication, you need to install a Java 6 SE runtime. Would you like to check for and install one? (smaller print) Note: Usw of this software is subject to the Software License Agreement applicable to the software you are downloading. A list of Apple SLAs may be found here: htp://www.apple.com/legal/sla/
Finally there are two boxes to click. One says not now. If I click on that the box goes away for 2 to 3 seconds and then pops back up and WILL NOT go away. If I click on the second box, Install, it says The software is currently unavailable. To install a Java SE 6 runtime later, open Java Application again.
My confusion here is that I have no idea what the java application is, When I click "okay" on that box, the original box pops us again and WILL NOT go away. CGoing to the apple lega web site was no help. My solution so far has been to drag the dialogue box as far to the lower right and out of the way as far as I can. Help.

Does this happen immediately after you log in? If so, one of your login items is probably causing it.

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

Welcome to the SQL Server Disaster Recovery and Availability Forum

(Edited 8/14/2009 to correct links - Paul)
Hello everyone and welcome to the SQL Server Disaster Recovery and Availability forum. The goal of this Forum is to offer a gathering place for SQL Server users to discuss:
Using backup and restore
Using DBCC, including interpreting output from CHECKDB and related commands
Diagnosing and recovering from hardware issues
Planning/executing a disaster recovery and/or high-availability strategy, including choosing technologies to use
The forum will have Microsoft experts in all these areas and so we should be able to answer any question. Hopefully everyone on the forum will contribute not only questions, but opinions and answers as well. I’m looking forward to seeing this becoming a vibrant forum.
This post has information to help you understand what questions to post here, and where to post questions about other technologies as well as some tips to help you find answers to your questions more quickly and how to ask a good question. See you in the group!
Paul Randal
Lead Program Manager, SQL Storage Engine and SQL Express
Be a good citizen of the Forum
When an answer resolves your problem, please mark the thread as Answered. This makes it easier for others to find the solution to this problem when they search for it later. If you find a post particularly helpful, click the link indicating that it was helpful
What to post in this forum
It seems obvious, but this forum is for discussion and questions around disaster recovery and availability using SQL Server. When you want to discuss something that is specific to those areas, this is the place to be. There are several other forums related to specific technologies you may be interested in, so if your question falls into one of these areas where there is a better batch of experts to answer your question, we’ll just move your post to that Forum so those experts can answer. Any alerts you set up will move with the post, so you’ll still get notification. Here are a few of the other forums that you might find interesting:
SQL Server Setup & Upgrade – This is where to ask all your setup and upgrade related questions. (http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/threads)
Database Mirroring – This is the best place to ask Database Mirroring how-to questions. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabasemirroring/threads)
SQL Server Replication – If you’ve already decided to use Replication, check out this forum. (http://social.msdn.microsoft.com/Forums/en-US/sqlreplication/threads)
SQL Server Database Engine – Great forum for general information about engine issues such as performance, FTS, etc. (http://social.msdn.microsoft.com/Forums/en-US/sqldatabaseengine/threads)
How to find your answer faster
There is a wealth of information already available to help you answer your questions. Finding an answer via a few quick searches is much quicker than posting a question and waiting for an answer. Here are some great places to start your research:
SQL Server 2005 Books Onlinne
Search it online at http://msdn2.microsoft.com
Download the full version of the BOL from here
Microsoft Support Knowledge Base:
Search it online at http://support.microsoft.com
Search the SQL Storage Engine PM Team Blog:
The blog is located at https://blogs.msdn.com/sqlserverstorageengine/default.aspx
Search other SQL Forums and Web Sites:
MSN Search: http://www.bing.com/
Or use your favorite search engine
How to ask a good question
Make sure to give all the pertinent information that people will need to answer your question. Questions like “I got an IO error, any ideas?” or “What’s the best technology for me to use?” will likely go unanswered, or at best just result in a request for more information. Here are some ideas of what to include:
For the “I got an IO error, any ideas?” scenario:
The exact error message. (The SQL Errorlog and Windows Event Logs can be a rich source of information. See the section on error logs below.)
What were you doing when you got the error message?
When did this start happening?
Any troubleshooting you’ve already done. (e.g. “I’ve already checked all the firmware and it’s up-to-date” or "I've run SQLIOStress and everything looks OK" or "I ran DBCC CHECKDB and the output is <blah>")
Any unusual occurrences before the error occurred (e.g. someone tripped the power switch, a disk in a RAID5 array died)
If relevant, the output from ‘DBCC CHECKDB (yourdbname) WITH ALL_ERRORMSGS, NO_INFOMSGS’
The SQL Server version and service pack level
For the “What’s the best technology for me to use?” scenario:
What exactly are you trying to do? Enable local hardware redundancy? Geo-clustering? Instance-level failover? Minimize downtime during recovery from IO errors with a single-system?
What are the SLAs (Service Level Agreements) you must meet? (e.g. an uptime percentage requirement, a minimum data-loss in the event of a disaster requirement, a maximum downtime in the event of a disaster requirement)
What hardware restrictions do you have? (e.g. “I’m limited to a single system” or “I have several worldwide mirror sites but the size of the pipe between them is limited to X Mbps”)
What kind of workload does you application have? (or is it a mixture of applications consolidated on a single server, each with different SLAs) How much transaction log volume is generated?
What kind of regular maintenance does your workload demand that you perform (e.g. “the update pattern of my main table is such that fragmentation increases in the clustered index, slowing down the most common queries so there’s a need to perform some fragmentation removal regularly”)
Finding the Logs
You will often find more information about an error by looking in the Error and Event logs. There are two sets of logs that are interesting:
SQL Error Log: default location: C:\Program Files\Microsoft SQL Server\MSSQL.#\MSSQL\LOG (Note: The # changes depending on the ID number for the installed Instance. This is 1 for the first installation of SQL Server, but if you have mulitple instances, you will need to determine the ID number you’re working with. See the BOL for more information about Instance ID numbers.)
Windows Event Log: Go to the Event Viewer in the Administrative Tools section of the Start Menu. The System event log will show details of IO subsystem problems. The Application event log will show details of SQL Server problems.

hi,I have a question on sql database high availability. I have tried using database mirroring, where I am using sql standard edition, in this database mirroring of synchronous mode is the only option available, and it is giving problem, like sql time out errors on my applicatons since i had put in the database mirroring, as asynchronous is only available on enterprise version, is there any suggestions on this. thanks ---vijay

E26 253 Error while checking in and storing: \\sapserver\file.tif

Hi Experts,
I have now been fighting with this problem for a couple of weeks, and not been able to solve the issue.
My problem is to upload/check-in documents from the application serve in background.
I have a program to create DIF and attach files using BAPI_DOCUMENT_CREATE2.
When I'm running the program in foreground there is no problem.
When I run it in background I get the error message E26 254 Error while checking in and storing:
sapserver\file.tif
I have checked that the background process can see the document on the server and that is OK, so the problem must be within the actual storing of the document in DMS in the BAPI.
Any input to how I can solve this issue is appreciated.
Thanks in advance,
Thomas

Hi All,
We have now done some testing.
We got it to work on one of our systems but not on the other
I ran report RSCMST on both systems with the same backend directory. (A directory on the application server of the one that fails).
Running this report I get this result on the system that does not work.
HTTP interface test using function group SCMS_HTTP
21.06.2010 14:39:01
serverInfo:
contRep                   ZEBAN
contRepDescription        PR Attachments
serverStatus              running
serverVendor              Copyright SAP AG, All rights reserved 1998, 2001
serverVersion             6300
serverBuild               193
serverTime                123902
serverDate                21.06.2010
serverStatusDescription
pVersion                  0046
contRepStatus             data(89%) log(1%)
contRepStatusDescription
                                                  ok           58.848
create(1): new doc (frontend)                     ok          445.211
create(2): new doc (back end)
check_subrc: subrc     2 instead          0
check_subrc: HTTP error: 400 Bad Request
create(2): new doc (back end)                    error
docGet/create(1): copy document                   ok          105.684
info(1): existing doc                             ok           26.881
update(1): new comp                               ok           47.050
info(2): after update                             ok           30.458
delete(1): unknown doc                            ok           33.061
delete(2): unknown comp                           ok           31.669
delete(3): existing doc                           ok           53.330
delete(4): deleted doc                            ok           34.781
delete(5): existing doc                           ok           31.088
putCert:                                          ok           35.785
         1 errors
Any ideas to what could be wrong?
Thanks in advance.

I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

DesertCatVicki
I am trying to get my Canon MP190 to print with Macbook, OS10.5.8. I used to use the printers utility file to check ink levels. Now am told must go to Apple for latest drivers, etc. Where do I go??I am lost.

Printer and Scanner software available for download:
http://support.apple.com/kb/HT3669?viewlocale=en_US

Check Price and Availability: is BAdI a must to fetch customer?

Similar Messages

Maybe you are looking for