Check whether the document text is filled in the manual posting document.

Dear BCS experts,
Our client would like to have a check whether the document text is filled in the manual posting document.
Do you have any ideas how it is possible to implement?
Thanks.

The probelm is solved. I implemented the validation of document header with a condition function.

Similar Messages

Checking Whether Physical Standby is in Sync with the Primary

I writing script to alert dba if primary and standby database are not in sync. I use article - How To Check Whether Physical Standby is in Sync with the Primary? ID 861595.1
It suggests comparing Last Sequence Generated on primary and Last Sequence Received on standby for each thread. And if they are not equal - NOT in sync.
My assumption is that if there are multiple threads we running RAC. Is it correct ?
And if we running RAC as far as I am aware it's sufficient to have one thread in sync.
Please comment on this
Thanks in advance
Edited by: user613441 on Jan 6, 2010 9:16 PM
Edited by: user613441 on Jan 6, 2010 9:17 PM

deleted

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was

I am trying to install Lightroom and I am OK until it asks for a serial number. I purchased Lightroom from B&H and the have entered the seal number on the the B&H invoice. Nothing happens, not all the entry boxes are filled with the serial number that was provided by B&H. I looked for a serial number on and in the box it came in, nada. Need a bit of help here, what can I do?
RJ@

Try to connect on Live chat one more time.
Still not connected , better to contact Adobe Phone Support
Click on Phone option and check once :
Contact Customer Care

I am not able to open my itunes store account in my apple iphone.What is the security code? Where can i get the security code to fill in the form of apple itunes store account?

iphone 4 32 gb
version 7.1.2 (11D257)
when i open the account itones store asks a security code. I purchased this device from another person. i dont know the security code to fill in the format.

The security code is the Apple ID of the person who setup the account. You will need to have the person you purchased the iPhone from remove their information from the iPhone.

Is Content stored in the Rich Text Editor saved to the Database?

Is Content stored in the Rich Text Editor saved to the Database? We are planning a migration from our Dev environment to our QA/Staging environment and would like to migrate our existing content. We were told that content stored in the Rich Text Editor is stored somewhere in the Plumtree database. Is this true? If so, where in the DB (table/field) is it stored?

Some of the content from Publisher is stored in the file system.
Look under: plumtree\ptcs\publishedcontent
there you'll find your preview and published content.

Remove text "This is the instruction text that applies to the entire page.

Hi,
How to remove text "This is the instruction text that applies to the entire page." under header, this text is defaulted and display under header (above search panel)
Please help..

Click on Personalize Page
In personalization structure Choose complete view and identify the item you would like to hide and click on personalize for that item
set the rendered property to false
regards
Ravi

How to check whether a default browser is opened in the operating system?

Hi,
I am newbie here. During my work, I faced an interesting problem. I need to:
- check whether a default html browser is opened;
- check whether the browser is minimized/maximized (simply, a window's state);
- get an url address typed in the browser.
If any of these conditions is not met, I have to open the browser in a maximized view with a desired url address. I primarily wanted to do all this in Java, but it came to my mind that I should employ many techniques/technologies and combine them appropriately to complete the functionality. But, which ones? That's the problem. I just recalled Windows API, but I'm not sure if it is of any help... On another forum, some users suggested that I should consider JNI... At this time, I only know how to open a default browser (e.g. with use of the 'browse(URI uri)' method of the 'java.awt.Desktop' class) - that's too little to be proud of. Please give me some hints, maybe links to reasonable discussions, I would greatly appreciate any suggestions how to approach the problem.

Crosspost! [http://www.java-forums.org/advanced-java/29583-how-check-whether-default-browser-opened-operating-system.html]

How to check whether set up tables are filled or not

Hi Gurus,
How to check whehter set up tables are filled or not?
Cheers,
Reddy.

Hi Reddy.......
And another point I want to make u clear............LBWQ is not the Delta Queue.............Delta queue is RSA7...............it comes into play in delta loading.......LBWQ is Extraction Queue.........While delta loading....if we use the Update mode Queued Delta........then any Changes will not directly get updated in the Delta queue.....For the Delta set up.........
1) First u hav to run init with data transfer(After filling the set up table)
2) After that any Changed ........will be recorded in the Extraction Queue(LBWQ)........
3) After a certain number of records get accumulated in LBWQ........We hav to run V3 jobs to bring the data in the Delta queue(RSA7)...
Check this.....
Re: question on LBWQ and RSA7
Regards,
Debjani.....

How To Check Whether Physical Standby is in Sync with the Primary

hi All,
I'm new in data guard. In our current production, my boss is asking me to write a shell scripts monitoring physical standby and primary archive is sync (archive gap)
I'm referring metalink [ID 861595.1], but when i ran the first query in Primary node, the screen hang.
On primary
========
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1;
I tried to turn on 10046 SQL trace, the SQL consume a lot of CPU, and it full table scan in X$KCCAL table.
TKPROF result look like below:
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1     88.29     115.59          0          0          0           0
total        3     88.30     115.60          0          0          0           0
Misses in library cache during parse: 1
Misses in library cache during execute: 1 Optimizer mode: ALL_ROWS Parsing user id: 80
Rows     Row Source Operation
      0 SORT ORDER BY (cr=0 pr=0 pw=0 time=21 us)
      0   FILTER (cr=0 pr=0 pw=0 time=19 us)
   1124    FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=40537 us)
      0    FILTER (cr=0 pr=0 pw=0 time=115538625 us)
   1122     HASH GROUP BY (cr=0 pr=0 pw=0 time=115530193 us)
7465972      FIXED TABLE FULL X$KCCAL (cr=0 pr=0 pw=0 time=94648975 us)
Elapsed times include waiting on following events:
Event waited on                        Times   Max. Wait Total Waited
-----------------------------------   Waited ---------- ------------
SQL*Net message to client               1        0.00          0.00
control file sequential read        16841        0.05         30.88
SQL*Net break/reset to client           1        0.00          0.00Due to this is production environment, thus i had terminated the session, can anyone teach me or share with me any scripts to monitor physical standby is sync with primary or not? Or do you encounter the above issue when running the SQL?
My db version is Oracle 11.2.0.1.0
Thanks in advance.
Regards,
Klnghau

Hello;
Note 861595.1 has not been subject to an independent technical review. Not sure if that make it bad or not.
This is what I'm using: ( I spool this to a file and have it e-mailed to me daily)
PROMPT
PROMPT Checking last sequence in v$archived_log
PROMPT
clear screen
set linesize 100
column STANDBY format a20
column applied format a10
SELECT name as STANDBY, SEQUENCE#, applied, completion_time from v$archived_log WHERE DEST_ID = 2 AND NEXT_TIME > SYSDATE -1;
prompt
prompt----------------Last log on Primary--------------------------------------|
prompt
select max(sequence#) from v$archived_log where NEXT_TIME > sysdate -1;
Best Regards
mseberg

How to display data with the same text and key in the drop down list?

Hi All,
Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
REPORT ZTESTING.
TYPE-POOLS: VRM.
DATA: NAME TYPE VRM_ID,
      LIST TYPE VRM_VALUES,
      VALUE LIKE LINE OF LIST,
      c(20) type c.
*      c = 'select any'.
data:begin of itab occurs 0,
      kunnr like kna1-kunnr,
      name1 like kna1-name1,
     end of itab.
data:begin of jtab occurs 0,
      kunnr like kna1-kunnr,
      land1 like kna1-land1,
     end of jtab.
PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
                          default 'SELECT'.
AT SELECTION-SCREEN OUTPUT.
NAME = 'p_list'.
VALUE-KEY = 'Name'.     "---> Data for key is the same with text
VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
APPEND VALUE TO LIST.
VALUE-KEY = '2'.
VALUE-TEXT = 'Country'.
APPEND VALUE TO LIST.
CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
start-of-selection.
select kunnr name1 up to 20 rows from kna1 into table itab.
select kunnr land1 up to 20 rows from kna1 into table jtab.
case p_list.
when '1'.
loop at itab.
write:/ itab-kunnr,itab-name1.
endloop.
when '2'.
loop at jtab.
write:/ jtab-kunnr,jtab-land1.
endloop.
endcase.
<Added code tags>
Moderator Message: Please use the "code" tags to format your code snippet.
Edited by: Suhas Saha on Nov 17, 2011 11:19 AM

shawnTan wrote:
Hi All,
>
> Would like so to seek for you advice on the above mention topic. How to display the data with the same text and key using function module 'VRM_SET_VALUES'. From my testing by writing a program, this function module will only show the text and key if both have different data. Please find the coding as below. Is the normal behaviour of this function module? How to overcome this problem? Thanks in advance.
>
>
REPORT ZTESTING.
>
> TYPE-POOLS: VRM.
>
> DATA: NAME TYPE VRM_ID,
>       LIST TYPE VRM_VALUES,
>       VALUE LIKE LINE OF LIST,
>       c(20) type c.
>
> *      c = 'select any'.
>
> data:begin of itab occurs 0,
>       kunnr like kna1-kunnr,
>       name1 like kna1-name1,
>      end of itab.
>
> data:begin of jtab occurs 0,
>       kunnr like kna1-kunnr,
>       land1 like kna1-land1,
>      end of jtab.
>
> PARAMETERS: p_list(20) AS LISTBOX VISIBLE LENGTH 20
>                           default 'SELECT'.
>
> AT SELECTION-SCREEN OUTPUT.
>
> NAME = 'p_list'.
>
> VALUE-KEY = 'Name'.     "---> Data for key is the same with text
> VALUE-TEXT = 'Name'.    "--> Data for text is the same with key
> APPEND VALUE TO LIST.
>
> VALUE-KEY = '2'.
> VALUE-TEXT = 'Country'.
> APPEND VALUE TO LIST.
>
> CALL FUNCTION 'VRM_SET_VALUES' EXPORTING ID = NAME VALUES = LIST.
>
> start-of-selection.
> select kunnr name1 up to 20 rows from kna1 into table itab.
> select kunnr land1 up to 20 rows from kna1 into table jtab.
>
> case p_list.
> when '1'.
> loop at itab.
> write:/ itab-kunnr,itab-name1.
> endloop.
>
> when '2'.
> loop at jtab.
> write:/ jtab-kunnr,jtab-land1.
> endloop.
> endcase.
>
> <Added code tags>
>
> Moderator Message: Please use the "code" tags to format your code snippet.
>
> Edited by: Suhas Saha on Nov 17, 2011 11:19 AM
This surely seems to be a bug to me(if not by design), did you check for any SAP notes? Perhaps a front end trace can help(Note 407743) !
-Rajesh.

Retrieve list items from the textbox text value and display the dropdownlist item for that particular list item

hi,
I have created a custom list in my sharepoint :
List1 name: employeedepartment -
Title empdepartment
A D1
B D2
C D3
List2 name: employeedetails
emptitle empname empdepartment(lookup) --> from the list "employeedepartment"
x Ram D1
y Robert D2
z Rahim D3
My task is to create a custom webpart that will be for searching this employee details by entering emptitle
For this, i have created a visual webpart using visual studio 2010, my webpart will be like this:
emptitle ---> TextBox1 Button1--> Text property : Search
empname---> TextBox2
empdepartment--> DropDownList1
For this, i wrote the code as follows:
protected void Button1_Click(object sender, EventArgs e)
using (SPSite mysite = new SPSite(SPContext.Current.Site.Url))
using (SPWeb myweb = mysite.OpenWeb())
SPList mylist = myweb.Lists["employeedetails"];
SPQuery query = new SPQuery();
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + TextBox1.Text.ToString() + "</Value></Eq></Where>";
SPListItemCollection myitems = mylist.GetItems(query);
if (myitems.Count > 0)
foreach (SPListItem item in myitems)
string a1 = Convert.ToString(item["empname"]);
string a2 = Convert.ToString(item["empdepartment"]);
TextBox2.Text = a1; // displaying properly
//DropDownList3.SelectedIndex = 1;
It is showing the list item in textbox according to the item entered in the textbox1... But I am stuck to show in the dropdown list.
Suppose, if i enter X in textbox and click on search, then dropdownlist need to show D1,
for Y --> D2 and for Z-> D3... like that.
What code do i need to write in the button_click to show this...
Please don't give any links...i just want code in continuation to my code.

Hi,
Since you have got the data you want with the help of SharePoint Object Model, then you can focus on how to populate values and set an option selected in the Drop Down List.
With the retrieved data, you can populate them into the Drop Down List firstly, then set a specific option selected.
Here is a link will show how to populate DropDownList control:
http://www.dotnetfunda.com/articles/show/30/several-ways-to-populate-dropdownlist-controls
Another link about select an item in DropDownList:
http://techbrij.com/select-item-aspdotnet-dropdownlist-programmatically
Best regards
Patrick Liang
TechNet Community Support

How to write program for the long text in EMIGALL for the DEVICE LOCATION.

Hi,
I am pretty new to this ISU field and i have been asked to code for a Long Text in EMIGALL for DEVICE LOCATION,
so i would like someone can help me with it.
thanks in advance.
Robert.

Robert,
You can find most of the answers to your questions in the Guidelines:
Chapter 2.4.2 describes how to configure the field rule Fixed Value.
Chapter 2.4.5 describes how to configure the field rule via KSM.
Chapter 2.5 descibes the Key- and Status Management and the usage of the the KSM in field rules.
The specific answer to your questions are:
(1) ...When i was adding the fixed rule, it was asking for domain so what should be the Domain that i should add ... You may ignore the domain field when creating a fixed value object. It's more for information purposes.
(2) ... and what should i keep the fixed value, string or filed or abap rule ... I'd suggest to use 'String' and enter the specific value in the field 'FV contents'.
(3) ... Finally you need to adjust the RETURN-FIELD of the newly created BAPI migration object to AUTO-X_HEAD-TDNAME, where do i make this adjustment can you specify that ... The return field can only be adjusted int the migration object maintenance screen (MigObject -> Change). Please see chapter 3.1 for more details on the 'return field' and figure 3-8 in chapter 3.4.2 how to generate a BAPI migration object.
(4) ... Well i would also like to ask about the x_head-tdname = via KSM (e.g. DEVLOC), where should i put the value ... You wanted to know how to migrate a long text of a device location migration object DEVLOC). According to chapter Chapter 2.4.5 you need to enter the name of the superior migration object (here DEVLOC) in the 'MigObject1'field on the 'via KSM' sub-screen on the field maintenance screen.
(5) ... and what exactly would it be can i put DEVLOC in the ID of technical Object and where should i put this value... I am not sure I understand your question. In the end you will need to pass the number (ID) of the technical object in the TDNAME field. Either you put the id into the import file (only if you know the id) or you need to use the 'via KSM' field rule to replace the legacy system key of the device location by the SAP key by the load report and prior to passing the auto data to the application thus your new function module.
Kind regards,
Fritz

Linux: The tabs text color changes with the theme, while the menu text color is always black.

Hello,
When Firefox theme is changed, it usually changes window appearance, e. g. backgrounds, and sets corresponding text color to contrast with that background. It always used to be like this. For instance, I currently use Sunflower_01 theme which sets blue sky as a background. The tabs text is white, as well as the bookmarks. The white text contrasts very fine with the sky. But the menu items are awfully black, casting dark-gray shadows on the dark-blue sky. The menu remains black regardless of the theme I set.
Of course, it's all fine without any add-ons (light background, dark text), but with a theme enabled, it looks not the way it used to be. I wonder if it can be fixed somehow.
I use Mozilla Firefox 33.0 for Linux Mint (release 13, maya).
Looking forward to your reply.
Regards,
Andrey

Hello,
Did you install from the repositories? I have found the same problem with Ubuntu 14.04, a workaround is to either use a userChrome.css file, or (in my opinion, the easier route) [https://addons.mozilla.org/en-US/firefox/addon/stylish/ Stylish] extension with a new Style.
See these articles about the userChrome.css file:
* http://kb.mozillazine.org/index.php?title=UserChrome.css
* http://kb.mozillazine.org/UserChrome.css_Element_Names/IDs
If you use the userChrome.css route, you may need to restart Firefox to apply the changes.
See this article for Stylish:
* http://forums.mozillazine.org/viewtopic.php?f=38&t=1570945
To add a new style in Stylish, click on the Stylish tool on your toolbar, then "Write New Style", then "Blank style". Or:
* Tools (or [[Image: New Fx Menu]]) > Add-ons > User Styles > Write New Style
Example code for either one method you choose (you can play around with the colours, but I found this worked nicely for my theme):
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*change size, color, style of text in Menu Bar */
menubar > menu
{color: darkgray !important}
/* Mouse hovering over menu */
menubar > menu[_moz-menuactive="true"]
{color: white !important;}
/* Active/Open menus */
menubar > menu[_moz-menuactive="true"][open="true"]
{color: black !important;}

Can you turn off the location text that appears on the bottom left for links in Firefox 4?

The text box that appears when you mouse over a link and it shows the location in the lower left. Can you turn that off? I find it annoying.

it would even be nice if there were options to change the status text such as length of time of popup, on/off, similar to how an information bar is customized. what makes it so annoying is that is pops up and never goes away and if you hover over it then it goes to the other side of the browser

Can I get the AD Login to fill in the Proxy Authentication?

Hi,
Here at work (an FE college) we have a windows based Proxy system that it's as hard as Fort Knox. Currently, when users have logged in, the Proxy Authentication box pops up, the users fill in their details, then another pops up and they fill it in again (one is for HTTP, the other HTTPS). Thing is, for some people, it continually pops up, causing great annoyance and complaints.
What I would like to find, is a way that when the user logs in (using the AD for authentication), that the details are then placed into the relvant fields in the Proxy Authentication.
I don't work for the IT department, so I'm not in a position to know many answers about the windows based stuff, but will try to follow any advice or questions you have.
Thanks,
LCM Technician

The security code is the Apple ID of the person who setup the account. You will need to have the person you purchased the iPhone from remove their information from the iPhone.

Check whether the document text is filled in the manual posting document.

Similar Messages

Maybe you are looking for