Check which data records have been updated or created by the business rule.

Dear all,
   Is there any way to check which data records have been updated or created by the business rule?
   For ex:
   When I run a data package which execute some standard store procedure and the log shows :
Executing SPRUNCONVERSION  'LEGALAPP', [ACTUAL], [GGGG],'GLOBAL','SPSCOPE_42412','SPLOG_125272'
SPRunConversion Version 2.06
20071200 - 210 Rows Calulated
20071200 - 84 Rows Updated
Anyway to see the data content of "84 Rows Updated "?
Best Regards,
Jeff

Yes each aplication has 3 fact tables:
FACTWB:Real time storage, when you send data it is stored here and this is linked to the FACTWB partition in OLAP which is a ROLAP partition to enable real time updates of the data.
FAC2: Short term storage. If too many records are in the FACTWB the aplication becomes slow because these records need to be queried by the OLAP engine everytime new records are send to the database. To clean up te real time storage you can do a lite optimize, which will move the FACTWB records to the FAC2 partition. this lite optimize can be done even when users are in the system.
FACT: this is the long term storage. When your reporting is finished you can run a full optimize to clean up both FACTWB and FAC2 tables and store it in the FACT table. This contains all your historical records.
Evertime you run a reort, SAP BPC is looking at all 3 partitions and combines the data of the 3 partitions to present the correct value in your report. Remember that BPC is posting differences in the WB and not the final values. So if you have for example a record with 10 in the FAC2 partition and you send 12 to the database for that intersection, BPC will post only 2. When running a report it combines the 10 and the 2 which makes 12.
Hope this makes it more clear.
Joost
Edited by: Joost Hoppenbrouwers on May 6, 2008 12:19 PM : Seems that James and I where writing pretty much the same post at the same time

Similar Messages

  • Any possibility of getting records have been updated by another user

    is there any possibility of getting the error
    --records have been updated by another user.please requery to see the changes.
    i am getting this error when no other user connected to same data base and only one session is opened.
    i am getting this error under below case.
    there are 3 fields in a multiple record block.
    field 1 will have the total amount.in field 2 i user can enter the percentage.and field 3 will be populated
    as field 1 * field 2 /100. if user changes field 3 it back update the field 2 as field3 * 100/field 1.
    there is a POST in when-new-record-instance.
    the above error comes when i navigate to second record
    and try to come bk and change the values in 1st record.
    if any one faced this problem or have any idea of it
    please let me know.

    thank u all
    the round option solved my problem. But still i am not clear with why it is giving when i am in the same session. Is there any link where i can get more info. on this perticular issue.steve i am not fully convinced with what u have said. can u give more details on this.
    once again i thank u all.

  • Error: Data may have been lost

    Hi All,
    I have a typically issue with the crystal reports 8.5.
    Below is details :
    I have application which is built using ms access and crystal reports 8.5
    When i run the application and download the reports in the form of excel,  i get a error saying that data may have been lost when i open the excel file. This happens only when i open the excel file in excel 2003 service pack 3, when contacted microsoft they said that this is a issue with the crystal report and not with the excel.
    So does any one have a idea how this issue can me resolved.
    Thanks in advance.

    How many records (rows) and columns are you exporting to Excel?
    Excel does have limits on both.....AND if you check the supported platforms document for CR8.5 you will notice that Excel 2003 is not supported.  May be time to move up to a newer version of CR.

  • IMac G5/17" Dec 2004 with OS X 10.3.7 - which CDs should have been shipped?

    I bought an iMac G5 17"/1.8 in December 2004 and I would like to check which CDs should have been shipped.
    The only CD I have is 'iMac G5 Additional Software & Apple Hardware Test'.
    I believe I should have had at least 2 other CDs
    Mac OS X install disc 1
    Mac OS X install disc 2
    Is that correct? Do the Mac OS X install discs include iLife and Appleworks, or just OS X 10.3?
    I would be grateful for any help, and suggestions.
    iMac G5/17"   Mac OS X (10.3.7)  

    If you purchased the computer from a dealer then it's still in warranty until next month. I would contact the dealer. If you did not receive all the software that should have come with the computer, then they can resolve that for you within your warranty. After the warranty expires any costs will be yours. I wouldn't wait for your answer here. Call the dealer.

  • Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Latest update returns error " None of the selected updates could be installed. The update could not be expanded, and may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs."

    Which latest update? Details get answers. Rather than using SU, DL and install from http://support.apple.com/downloads/.

  • The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs.

    How can I solve this? Every time I have the option to update an application I receive the same notification: "The update could not be verified. It may have been corrupted during downloading. The update will be downloaded and checked again the next time that Software Update runs"

    Can we eliminate one minor possibility: are you in the UK and using Virgin Media cable connection? I ask because the latest 'Superhub' firmware is corrupting large downloads for some people.

  • Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    Hello,
    I have the following scenario for the installation of EPM 2013 environment:
    1 Server running Windows 2008 R2 SQL Server 2008 R2 Service Pack 2
    1 Windows Server 2008 R2 Standard SP1, running Sharepoint 2013 Enterprise (Standard Initially installed and then migrated to the Enterprise in order to install Project Server 2013), Project Server 2013 and Workflow 1.0 (2013).
    After configuring and validating the configuration of Workflow 1.0 by http://server_name.example.com:12291 page and also check the Application Services in Central Administration and receive the Workflow Status = Connected.
    Alright, but when I run the SPD 2013 RTM to test the creation of Sharepoint Workflow 2013, I get the following warning:
    "Server Side activties have been updated. You need to restart SharePoint Designer to use the updated version of activities."
    I've tried:
    a. Restart SPD2013;
    b. Restart Server 2013 and Sharepoint Workflow 1.0;
    c. Reinstall and reconfigure Workflow 1.0
    And the message is always displayed, preventing the use of Workflow Sharepoint 2013.
    Can anyone help me, I'm in the middle of a deployment to a customer.
    Print of alert

    How did you uninstalledLanguage Pack from SharePoint 2013 ? when I googled it I found that language pack cannot be uninstall@
    http://technet.microsoft.com/en-us/library/cc262108.aspx
    "If you no longer have to support a language for which you have installed a language pack, you can remove the language pack by using the Control Panel. Removing a language pack removes the language-specific site
    templates from the computer. All sites that were created that have those language-specific site templates will no longer work (the URL will produce a HTTP 500 - Internal server error page). Reinstalling the language pack will make the site functional again.
    You cannot remove the language pack for the version of SharePoint 2013 that you have installed on the server. For example, if you are running the Japanese version of SharePoint 2013, you cannot uninstall the Japanese language support for SharePoint 2013."

  • I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

    I have a brand new mini mac and a new apple TV. Both have been updated and can see my movies in itunes. I can use Netflix and stream music. I have tried to use my old laptop and it streams video fine. But my new computer only see a spinning circle.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • "FRM:40654 Record has been updated by another user" - Error in POST-QUERY

    Hi,
    I'm using Forms version 6.0.8.26.0
    In one of the forms, its data block is based on a view.
    In POST-QUERY trigger, I try to change the value for a database item. This operation results in following error:
    "FRM-40654: Record has been updated by another user. Re-query to see change."
    After this message the value of the item is automatically being set back to what was queried from the DB.
    I tried setting the DML Returning Value to 'Yes'. It doesn't help :(
    Any suggestions please?
    Thanks,
    Usha

    Hy
    try to set key-locking delayed
    and check
    if one field from the view as primary key
    or
    manually create On-Update, On-Insert, On-Delete and On-Lock triggers
    or
    write an INSTEAD OF TRIGGER

  • How to select which RFC USERS have been accessed my host ?

    Hi, guru
    how to select which RFC USERS have been accessed my host ?
    or how to record the RFC users's trace ?
    because the auditor wants to know it.
    Best regards,
    Michael

    how to select which RFC USERS have been accessed my host ?
    did you check ST03N->User profile ?
    or how to record the RFC users's trace ?
    Check ST01 for system trace.

  • Displaying the rows that have been updated....

    SQL> select * from spr;
    EMP_NAME EMP_no age sex
    hry 45353 42 M
    spt 43436 34 M
    pen 34533 21 M
    aen 65475 33 M
    SQL> select * from sprfac;
    EMP_NAME EMP_no age sex Appraisal Extra_Time
    hry 45353 N N
    spt 43436 N N
    pen 34533 N N
    aen 65475 N N
    I have a problem regarding updating the sprfac table.
    What i need is to satisfy the following conditions and update the second table with values in the second table.
    I need to upadate the second table when:
    1. The emp_name and emp_no of first table matches with the second table and
    2. The Appraisal field and extra_time field should be 'N' in the second table and
    3. only if the values of age and sex are NULL.
    Let me explain in detail.
    My original table is sprfac. spr is Temporary Table.
    I have some data in flat files and i have loaded all the data into a temporary table using sqlloader. Now i need to update the second table.
    Originally the age and sex fields in the sprfac table are NULL. Once i update the age and sex fields in the sprfac table again if i do update it should not update the rows which have data in age and sex columns.
    Suggest me how to update multiple columns simultaneously or send me the code for the update statement if possible.
    NOTE: I have changed the tablenames and column names since i cannot keep the original tables here.
    And i got the following reply........
    update sprfac a
    set (a.age, a.sex) = (select b.age, b.sex from spr b
    where a.emp_name = b.emp_name
    and a.emp_no = b.emp_no
    and appraisal = 'N'
    and extra_time = 'N')
    where a.age is null
    and a.sex is null;
    Everything is working fine.
    Is there any way to send the name and age fields which have been updated of sprfac to a file.
    should i use cursors....
    Send me the code if possible....
    Thanks..........

    You can try similar to this, if you have oracle 9i. In 8i merge does not work. In that case u have cursor.
    merge into EMP e1
    using akg_emp e2
    on ( e2.empno = e1.empno AND e1.sal > 1000 AND <whatever condition on e1>)
    when matched then
    update set e1.sal = 100
    when not matched then
    insert ( empno, ename, job, mgr, hiredate, sal, comm, deptno )
    values ( e2.empno, e2.ename, e2.job, e2.mgr, e2.hiredate, e2.sal, e2.comm,
    e2.deptno )

  • Error while saving a workflow via sharepoint designer: Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.

    While saving a workflow using SharePoint designer on a SharePoint site, I get the following error: 
    Server-side activities have been updated. You need to restart SharePoint Designer to use the updated version of activities.
    Steps to recreate error:
    Login to the WFE server hosting IIS and workflow manager, open SharePoint Designer 2013 and login to a SharePoint site.
    Access the list using SharePoint Designer 2013, in the workflow section, click new workflow. 
    In the new workflow dialog, enter workflow details, click save (see screenshot below).
    Error message is displayed as below:
    After restarting SharePoint Designer, the saved workflow is not seen in the site/workflows or list/workflow section.
    Workaround
    When the above steps are repeated while accessing the site via SPD from any other box besides the WFE/Workflow manager host server, the error is not encountered and its possible to save/publish workflows.
    Notes
    Workflow Manager 1.0 is installed.
    The site has been registered with Workflow manager using Register-SPWorkflowService
    cmdlet.
    Any clue on why is this happening?

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SAP report showing sales orders on which pricing conditions have been chang

    Is there a SAP report that shows a list of sales orders on which pricing conditions have been changed.
    My knowledge is:
    Review pricing condition transaction data table (‘KONV’) helps is some way.

    Hi Ashish,
    I don't know any such a report, but I guess you can play arround with table CDPOS.
    Change doc. object = VERKBELEG
    Table Name = KONVC.
    Actually this will take lot of time.
    Thanks,
    Mandar

  • If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and gi

    If i download any file which is prepare on microsoft office 2007 . The file have been download without extension of the prog. Means if files name is "1,docx" when i download from firefox it download in that form "1". after download i have to rename and give the extension name is plz tell me the way that office files are compatible with it.
    == This happened ==
    Every time Firefox opened
    == when i download the office files

    In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
    To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a W

    I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a Windows 8 OS so I bought the 13 and downloaded it on the new laptop. Our desktop had died so I downloaded the 13 on the new  desk computer also. Not thinking I downloaded 13 on my old laptop as I hope to get it patched up enough to be a backup for my photography. When I tried to activate it I realized that I had downloaded it too often. I didn't know you could only use it on two computers. Learn something new every day.. Any way I removed it and now my PSE 12 does not seem to be working. Now it could be something that I did or something that is an issue with the laptop. this laptop has all the previous editions on board as I always tried to update, except for the year I got a really good deal on Black Friday. I also notice that the new laptop has a copy of PSE 12 in the program list. To my knowledge I have never deactivated any of my PSE's except the extra 13 downloaded. Bottom line, do I need to go in and deactivate previous PSE versions and removed them from my computer? I could certainly use the space and secondly, can I deactivate the PSE 12 and then go back and reacitivate it and install it again on the old laptop or the desktop, whichever I deside would be the most appropriate place for the newer program. For the PSE 12 since it is an updater for 11, does the 11   still need to be on the laptop? thanks for anyone who can understand what I am trying to say and can advise me as to my next move. Thank you very much.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

Maybe you are looking for