Checkbox in the title of JTabbedPane

How can I add a check box to the title of the JTabbedPane, so that I can check-uncheck these tabs.
Or is there a workaround/anothe idea that will allow me to have similar functionality.
TIA,
- Manish

Found the solution.
Instead of extending BasicTabbedPaneUI, I should extend javax.swing.plaf.metal.MetalTabbedPaneUI to get the desired look and feel.
I don't know if this is the right approach though. What if a different look and feel is used?
How do I conform to the appropriate look and feel?
Edited by: Tiwaris on Dec 7, 2010 2:35 PM

Similar Messages

  • How to set focus on the title of JTabbedPane

    I have created a JTabbedPane and added three JPanels to it. They are titled, say "Panel 1", "Panel 2" and "Panel 3". And each of them contains buttons and text areas. Since this app is for physically disabled users, it must provide navigation through these three tabs with keyboard operations only (i.e. without mouse clicks).
    When the title "Panel 1" gets focused, users can go to "Panel 2" by the right arrow key. When Panel 2 is brought up, however, the title "Panel 2" does not get focused. Instead the first button inside panel 2 is focused. In order for users to navigate to 'Panel 3" by the arrow key, the title "Panel 2" has to be focused. How do I set focus on the tab title?
    I have tried 'requestFocus()' on Panel 2, but it does not work. Please help me with this issue. Thanks in advance.

    I'd be quite interested to know if this can be doen as well so I thought I'd post this message to move it to the top of the board.
    Thanks.

  • How can I change the font of the titles in a JTabbedPane

    Hi
    I use a JTabbedPane in a project and use windows LookAndFeel.
    I want to distinguish the selected Tab titels by changing the font of the title. Is there anybody who can help me. I can not find any component used as the title. They are only there when I create the tabs with.
    myTabbedPan.addTab("aTitle",aPanel);
    How TabbedPan use the string "aTitle" to create Tab "Buttons". Is there a component or... I can not get it
    Thanks
    nan2000

    Unfortunately, you have to sub-class the WindowsTabbedPaneUI to do that, and override the convenient methods.
    After that, you have to specify to the UIManager this new class it have to use to display the JTabbedPane components.
    Denis

  • Problem with checkbox in the selection screen

    Hi guys,
    I have a problem with the check box in the selection screen.When i select a check box then a field in the selection screen should be enabled for entering a value.Again if i unselect the checkbox then the field should be disabled for entering a value.I have written the code in at selection-screen output.
    The problem is when i select the check box ,the field is not enabled.But when i press enter after selecting the checkbox then the field is enabled for input.It is the same when i unselect the checkbox,after i press enter only the field is getting disabled.What could be the problem.Any suggestions please?
    Thanks.

    Hi d p
                 Please try this code . I think this code have some way that you would like.
    REPORT  zdownload_to_application_server.
    TABLES : caufvd, jest.
    I N C L U D E  P R O G R A M                                        *
    *INCLUDE znrpstnd.
    Selection Screen                                                    *
    SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-t03.
    PARAMETERS: p_outb RADIOBUTTON GROUP g1 USER-COMMAND outb DEFAULT 'X' ,
                p_inb RADIOBUTTON GROUP g1.
    SELECTION-SCREEN END OF BLOCK b3.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-t01.
    PARAMETERS : p_werks LIKE caufvd-werks MODIF ID a.        " Plant   "OBLIGATORY
    SELECT-OPTIONS  :  s_auart FOR caufvd-auart MODIF ID a,       " Order Type
                       s_aufnr FOR caufvd-aufnr MODIF ID a.       " Order number
    PARAMETERS: p_path TYPE string DEFAULT 'C:\SchedulerInterface-OutboundTextFile\' MODIF ID a,
                p_actual AS CHECKBOX MODIF ID a.                  " Transfer Actual
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
    PARAMETERS : p_werks2 LIKE caufvd-werks MODIF ID b,   " Plant   "OBLIGATORY
                 p_path2 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
                 p_path3 TYPE string DEFAULT 'C:\SchedulerInterface-InboundTextFile\' MODIF ID b,
                 p_sessio TYPE apqi-groupid MODIF ID b.   " BDC Session
    SELECTION-SCREEN END OF BLOCK b2.
    AT SELECTION-SCREEN OUTPUT.
      IF p_outb EQ 'X'.   " Outbound --> Hide inbound
        LOOP AT SCREEN.
          "IF screen-name = '%BT02011_BLOCK_1000'.
          IF screen-group2 = 'BLK'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'A'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'B'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          "IF screen-name = '%BT01004_BLOCK_1000'.
          IF screen-group3 = 'BLK'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'A'.
            screen-active = 0.
            MODIFY SCREEN.
          ENDIF.
          IF screen-group1 = 'B'.
            screen-active = 1.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path2.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = 'C:\SchedulerInterface-InboundTextFile\'
          mask             = ',Text Files,.txt,All files,.*.'
        IMPORTING
          filename         = p_path2
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path3.
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = 'C:\SchedulerInterface-InboundTextFile\'
          mask             = ',Text Files,.txt,All files,.*.'
        IMPORTING
          filename         = p_path3
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
    TOP-OF-PAGE.
    START-OF-SELECTION.
    Regards
    Wiboon

  • How-to set the title of  a View

    Hi,
    I'm a very newbie of Obj-C and InterfaceBuilder.
    From three days I'm fighting with my iPhone app to set the title of a view.
    I've the MainWindow.xib with a UITabBarController; each tabbar's viewcontroller is on a separate xib (i.e.: the GUI of every button of the tabbar is on a different xib file).
    In IB I set up the top bar property to Translucente etc... In Xcode, in the viewDidLoad I set the self.title to something... but the top bar is never shown!!
    I also tried to set self.navigationItem.title... but nothing...
    To see the top bar do I have to use a NavigationController inside every "button" of the tab bar?? Or is the top bar property of IB not working??
    Thanks to all...

    Wenwen,
    View Function dropdown "standard view" is just making the ALV to display the ALV standard configuration (so it will display the ALV the way is designed).
    now if you want to change that to your OWN VIEW you just need to click in the SETTINGS (ALV TOOLBAR at the right end) and then configure your ALV the way you want to be display. After that click SAVE AS and you can name the VIEW to your own and also you can click INITIAL VIEW checkbox in order to display always that for youl.
    Please note that this is a user base personification so this will be only available for you.
    if you want to have your own view for every user then you need to enhanced the ALV in a POST-EXIT method and do not allowed user personification.
    you can disable user personification at the application level in the parameters tab.
    hope this help!
    Jason PV

  • How to disable a default selection checkbox in the tableview

    Hi All,
             How to disable a default selection checkbox in the tableview ???
    I have  a tableview  with a iterator class mentioned on the iterator attribute of the table view. Table is a MULTISELECT tableview . Is it possible to disable or make it invisible a particular row selection check box?.
    For my scenario I have Currency values on all the columns and I want to do a sub total overall total for all the price column fields in the last row of that table. I archived this functionality using Iterator class method. But I don't want the user to delete that last row in any case.
    Thanks for your help in advance.
    Thanks,
    Greetson

    Hi,
      You can NOT disable the "Checkbox" of particular row using HTMLB. I had the same requirement. I achieved using <b>2 Tableviews</b>, one after another. 1st tableview will show all the rows and 2nd Tableview(without Table Header) and without any row. The <b>total</b> will be displayed as <b>Column title</b> of 2nd Tableview.
    Here is the code of 2nd tableview which we used to display the Total:
              <htmlb:tableView id                  = "tv2"
                               headerVisible       = "false"
                               keyColumn           = "appid"
                               footerVisible       = "false"
                               selectionMode       = "SINGLESELECT"
                               design              = "ALTERNATING"
                               fillUpEmptyRows     = "false"
                               visibleRowCount     = "0"
                               width               = "100%"
                               table               = "<%= tot_header %>" >
                <htmlb:tableViewColumns>
                  <htmlb:tableViewColumn columnName = "empno"
                                         title      = "Total"
                                         width      = "50"
                                         type       = "TEXT" >
                  </htmlb:tableViewColumn>
                  <htmlb:tableViewColumn columnName = "ename"
                                         title      = "  *      "
                                         width      = "90"
                                         type       = "TEXT" >
                  </htmlb:tableViewColumn>
                  <htmlb:tableViewColumn columnName = "appamount"
                                         title      = "   <%= tot_appamt %> "
                                         width      = "60" >
                  </htmlb:tableViewColumn>
                  <htmlb:tableViewColumn columnName = "ugjr_amt"
                                         width      = "60"
                                         title      = "<%= tot_ugjr %>" >
                  </htmlb:tableViewColumn>
                  <htmlb:tableViewColumn columnName = "apprvd"
                                         width      = "50"
                                         title      = "*" >
                  </htmlb:tableViewColumn>
                </htmlb:tableViewColumns>
              </htmlb:tableView>
    Hope this will help you.
    <b>Note: Reward each useful post.</b>
    Raja T
    Message was edited by:
            Raja T

  • How do I change the way the title/author appear and is there any way to remove pages on EPUBs?

    Hi all--
    I am having a really hard time--I am trying to transfer EPUBs from my Win 7 comp to my Nook Tablet. I bought a lot of books from several non-BN sites because they were lots cheaper and were also sold in bundles--but the site was messed up and sent the books in PDF form rather than EPUB.  PDF files won't read like a regular book on my Nook Tablet, so my friend offered to convert them to EPUB for me.
    Most of the books turned out fine, but some of them now have a few extra pages at the beginning before the cover image and the correct title and author are not displaying--it seems to instead show the filepath where the file was saved on m friend's computer (C:\My Computer/Documents and Settings...etc.)
    So, what I would like to do is be able to edit the EPUB files so I can delete the extra pages at the beginning so the correct cover image will be displayed and to be able to change the file's data sp it will show (and be searchable by) the correct title and author.
    I am new to all this, so I appreciate any help you can offer.  Thank you SO much for your help!!
    --Jamie
    P.S.  Having the title and author show up correctly so they are searchable and appear in the correct place on my Nook Tablet is the top priority--correct cover pages would be nice aesthitically, but it is not that important.
    ****ALSO--does anyone know of an app or anything for the Nook Tablet that would allow PDF files to be read just like an EPUB/B&N=purchased book?  Currently when I open a PDF, it shows the page in TINY print--you can use pinching to zoom in, but then the file enlarges so it is bigger than the screen, making it very hard to read.  I can't figure out any way to enlarge the text but still fits the page like an EPUB does, so I'm wondering if there's an app that would do that--it's hard because you can't try apps before you buy them and I can't teel if they will work from the descriptions.

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • Checkboxes:check the dish in one table-it checks off ingredients in another

    If you select a dish from a table of recipes (via checkbox) can you make it select all the ingredients for that dish from another table, your master ingredients list?
    I think it has to do with Boolean true/false, but checkboxes seems weird to me...they dont act like normal formula cells.....
    This would be really helpful for shopping/meal planning.........thanks

    Create a new table .
    In cell A1 grab the name of the selected dish
    In column B insert formulas grabbing the required ingredients.
    These formula would use the function VLOOKUP to extract the ingredients required for the dish whose name is in $A$1.
    I'm not sure that checkboxes are the good tool to select the dish because it's easy to have several boxes checked in a single column.
    I feel that using a popup menu would be a better soluce.
    If you really want to use checkboxes, it would be good practice to create a table with a single cell containing a formula displaying an alert if more than one box is checked.
    Yvan KOENIG (VALLAURIS, France) vendredi 5 mars 2010 22:02:42

  • I cannot add a Wi-Fi guest network. Gone to Utilities Airport Utilities and all get is an image/browser of my Airport Extreme. Looking for the browser which has the title Wireless but cannot find anywhere. I need help?

    I cannot add a Wi-Fi guest network. Gone to Utilities>Airport Utilities and all I get is an image/browser of my Airport Extreme. Looking for the browser window which has the title Wireless but cannot find anywhere. What am I doing wrong?

    Open AirPort Utility. The first screen looks something like this:
    Click on the AirPort Extreme and another screen will appear. Click Edit, then the window with the Wireless tab will appear.
    If you do not see these screens, you will need to start over and configure your AirPort again.

  • When I rip a CD to iTunes. All goes well until I click on All Albums. If there are other artists named with the Title Artist they are shown as different albums so I end up with 16 albums containing 1 track instead of 1 Album with 16 tracks. Can I fix this

    When I rip a CD to iTunes all goes well until I click on All Albums. If there are other artists named as well as the Title Artist, I end up with what appears as 16
    Albums with 1 track instead of 1 Album with 16 tracks. Can I fix this ?

    Had a similar problem with two tracks from a cd being segregated in a separate list, but with the same album title and artwork as the other 19 tracks. I found that by double clicking the artist field next to the album icon you can then edit that info.  In your case it sounds as if you might want to erase the artist info altogether. Once you have done that, all the tracks magically group together, as they should have done in the first place. Oh there might be a dialog box first, asking if you really want to do this.
    Hope this helps.

  • Displaying the title of the open panel when attached to a window...?

    This is probably a really obvious question... but when displaying the open panel as a panel/sheet attached to another window - is there a way to display the panel's title, or some other way to prompt the user?
    For example, I have a preferences window that the user can click a variety of controls, several of which display the open panel... I'd like some way to remind the user which path to select (eg. "Select the path for BLAH").
    One way around it is to temporarily set the title of the window the open panel is attaching to, but I have several windows, and the panel may attach to any one of them... I'd rather not test for each possibility (because, for example, the nib for that window might not be loaded yet, etc.).
    Any ideas?

    Wow, I should probably get some sleep...
    The answer is obvious... after all, I need to know which window to attach the panel to.

  • TS2530 When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    When I put a burned cd from one Mac into another Mac, song titles do not show up! I have to enter them manually! My CD player reads the titles that i on the cd; how can I get my Mac to do so?

    The problem is that I burned these CD's myself from music that I added from my personal collection to iTunes. The INFO is ON the CD's (it appears perfectly when I put the CD in my Numark mixer...so I know the info is on the CD), but for some reason, my MAC PRO will NOT read the info on the burned CD when I place the CD into the MAC PRO. The CD was burned on a MAC that I no longer own. But there HAS to be a way to transfer songs from a burned CD with the INFO that is on the CD burned with iTunes.
    PLEASE HELP!
    -Old Appel

  • Hallo ,why is it that when I delete a photo ,which is backed up by time machine and western digital external hard drive , that I am able to restore the photo okay but not the titles and descriptions . I have  a Macbook 4.1, mac osx 10.5.8 . Iphoto 7.1.5 ,

    QUESTION.
    Hallo , my question is ;whenever I delete a photo and restore it through Time machine and Western digital external hard drive , I am able to restore the photo but not the titles and descriptions . Western Digital inform me that it isn't their external hard drive problem and suggest that it is an Apple software problem ?
    I am using  a Macbook 4.1 , with Mac OSX 10.5.8 . I photo 7.1.5 , last modifie4d 01/05/2010 -universal . Should I be upgrading  Iphoto ?
    I hope that someone is able to help in this matter , as i have to restore 12000 photos !
    Thanking you in anticipation.
    Alan from Wigton

    Hallo  Kieth ,
    I am not quite ready to restore the full iphoto library , as I have days of work re - imputting titles,descriptions and enhancement . I hope that your suggestion works , as I use my Macbook basically to work with digital photography. Through time , I will need to delete my library to recover more disc space and I would hate to have to spend more time re - imputting titles and descriptions all over again .
    Thanks for your interest and advice.
    regards  - Alan

  • Need info on how to get the little pictures like Adobe website has next to the title of the page??

    I know how to enter title text but i need to know how to get an image next to the title of the page please help??

    http://alt-web.com/favicons.shtml
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb

  • When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

    when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
    the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
    i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
    i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
    any help would be greatly appreciated, thanks

    there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

Maybe you are looking for