Error in using CF_UT_UNIT_CONVERSION in the enhancement of Master data
Hi ,
Can anyone please help me in debugging the run time error.
This is the Run time error i am getting -
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in
procedure "Z_BWL_EXIT_0CUSTOMER_ATTR" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "CF_UT_UNIT_CONVERSION" is incorrect:
The function module interface allows you to specify only
fields of a particular type under "UNIT_OLD_IMP".The field "V_MASUN" specified here is a different
field type
Missing RAISING Clause in Interface
Program SAPLZCA_FG_EXITS
Include LZCA_FG_EXITSU02
Row 1
Module type (FUNCTION)
Module Name Z_BWL_EXIT_0CUSTOMER_ATTR
Trigger Location of Exception
Program SAPLZCA_FG_EXITS
Include LZCA_FG_EXITSU02
Row 113
Module type (FUNCTION)
Module Name Z_BWL_EXIT_0CUSTOMER_ATTR
Thanks in Advance,
sravani Kandy
Which version you are using ?
This fm doesnt exists in my system.
Similar Messages
-
Error when using PPR in the OA page developed.
HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block. -
What does this mean and what can I do to fix it. An error occurred while connecting to the AirPlay device “master bedroom”. An unknown error occurred (-15000).
Troubleshooting AirPlay and AirPlay Mirroring
-
Regarding the Time dependent master data error
Hi Masters,
I've loaded the time dependent master data from flat file only two fields. When I checked that corresponding characteristics in maintain master data, that contains by default from date 01.01.2007and to date 31.12.9999 this date also. Could you please help me to rectify this error.
Thanks in advance
Raja.SHi Antonino La Vela
I have 2 Project Manger and in different duration for different project.
Following datas are my data in Excel sheet.
PM Name To date From Date Costcenter
Ragunath 01.09.2007 01.06.2006 Project name1
Ramana mani 01.02.2008 02.09.2007 Project name2
while loading above data, I'm getting following data in maintain master data
PM name To Date From Date Costcenter
31.12.9999 01.01.1000
Ragunath 31.05.2007 01.01.1000
Ragunath 01.09.2007 01.06.2007 Project Name1
Ragunath 31.12.9999 02.09.2007
Ramana mani 01.09.2007 01.01.1000
Raman mani 01.02.2008 02.09.2007 Project Name2
Raman mani 31.12.9999 02.02.2008
Could you please help me, how this unnecessary datas are loaded by default?
Thanks in Advance
Raja.S -
How to make the Deprtmnt field in the cost center master data as required ?
Dear Experts,
I want to make the Department field in the cost center master data as required field.....how do i do it?
regards
SureshHi Eli,
Thanks for the quick reply
while creating the Cost center itself the field should come as required field........can that be met with this enhancement?. Because the transaction code being used int the enhancement is for change mode but i want this feature in create mode itself.
thanks
regards
Suresh -
PA30, attaching documents through the employee personal master dat
Dear freinds,
We are attaching documents through the employee personal master data
PA30, Our client wants to know where exactly these attachments are
getting saved; Our SAP environment is ECC6.0 on AIX 5.3. so i exactly would like to know what is the exact path where these documents are getting saved on AIX machine.
I would appreciate if you can tell us where exactly these documents are
getting saved at OS level, any particular file system you think,
because I probed in but couldnu2019t find where exactly there are on the
OS..
Regards
ayushhello,
SAP generally recommends that you store employee documents with a bar code. You can find the documentation to 'Storage Within Personnel Administration' using the following path:
=> Help => SAP Library => Human Resources => Personnel Management (PA)=> Personnel Administration (PA-PA) => Storage Within Personnel Administration (PA-PA)
In the SAP Standard it is not possible to tie original documents to specific personnel numbers in the PA30 transaction. The only exceptions are two specific scenarios where you can tie original documents in the PA30 transaction:
1. late storing with bar code
2. late storing without bar code
During both scenarios you start out in the Trx PA30. If the bar code entry is deactivated the actual key data will have to be transferred to the document in any case, otherwise you will be asked to enter a barcode again. Therefore the document would be transferred to the scanning location and then assigned to a specific business object.
Unfortunately it is NOT possible to upload a document directly into archive in the PA30 any other way.
Let me emphasize once more that PA30 can not be used for storing infotype specific documents. Via the special scenarios mentioned already by my colleague you are able to assign documents to the specific infotypes but the storing has to be completed outside of PA30.
Using the option Extras -> Assign facsimile in PA30 will be interpreted by the system as start for late scanning with barcode thus the error message.
Hope this help
Sarah -
Field is blank after enhancing 0Customer_attr master data in R3
Hi,
As per requirement to provide "Risk Category" ( filed - CTLPC) in Customer master data.
I enhanced 0Customer_attr Master data and added one filed ZZCTLPC.
I also written a user exit in Include ZXRSAU02 (Function Module - EXIT_SAPLRSAP_002) -
CASE I_DATASOURCE.
WHEN '0CUSTOMER_ATTR'.
break-point.
DATA: LV_BIW_KNA1_S TYPE BIW_KNA1_S,
LV_KNKK TYPE KNKK.
LOOP AT I_T_DATA INTO LV_BIW_KNA1_S.
SELECT SINGLE * FROM KNKK INTO LV_KNKK
WHERE KUNNR = LV_BIW_KNA1_S-KUNNR.
IF SY-SUBRC = 0.
LV_BIW_KNA1_S-ZZCTLPC = LV_KNKK-CTLPC.
ENDIF.
MODIFY I_T_DATA FROM LV_BIW_KNA1_S INDEX SY-TABIX.
ENDLOOP.
ENDCASE.
I am able to see data in RSA3 for 0Customer_attr - ZZCTPLC filed in Dev system.
When I transported the things to Quality, it shows me blank field.
I have checked that extract structur eis active, Include is active but it shows blank.
Even in debugg mode it does not stop at braek-point given in exit code, while same works fine in Dev system.
Please suggest the solution.hi, thats why i am also puzzled.
I have done transactional , masterdata source enhancement before.....but never faced such prob..
if it is working correct in dev, it used to work correct in qa..
any way si give u all details..
project - zbiw i sactive.
it has function modules..EXIT_SAPLRSAP_001, EXIT_SAPLRSAP_002, both are active..
inside EXIT_SAPLRSAP_002 , include ZXRSAU02 is also active...
any input from ur side will be a gr8 help..i m lost !! -
How to use LSMW on CRM for bulk master data creation?
Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
RohitHi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat -
How to check the records in Master Data Table?
Hi,
I am trying to load the Master Data Table using the Flat File.Now how to check the records in Master Data Table?
I done the following way:
Info Provider->Info Object->Right Click->Display Data or Maintain Master Data
But it's not showing the records.It's asking like CID from......To......
CID(SID)from.............To.......
here CID means customer id(characteristic).
and showing some settings.
Please guide me.
Thanks & RegardsHi Sri,
Go to T- code RSD1 and type your info object name and open the P- table in the infoobject then select execute symbol to see the updated data in to master data info object.
regards
sap -
Some segments are missing in the idocs for master data zdebmas
hi guru's,
can any one hlep me here we facing the probelumm
some segments are missing in the idocs for master data zdebmas
, there is some issue on the generation of the Site Master IDoc (Message type: ZDEBMAS, Basic type: DEBMAS06).
This is using the SAP standard program (RBDMIDOC) which reads the Site master change pointers.
There is some segments below is missing in the IDoc:
how to chcek this probelumm...hi
i got the function module. it is triggerig whne i do changepointer running.
what ever changes i made only that segments are onlycomming in to the idoc. but remaing segments are not comming.
my req is to show all segments even if i do changes in one segmet fields dont change theay have send to the interfece all athe segments.i ahve to do some enhancemetns for that
can u plse help me the login or any function module which will fill the alla the segmetns . -
Regarding chossing the Business Partner Master Data
Dear All,
I have one query regarding chossing the Business Partner Master Data. Let take an exapmle
suppose 2 sales person are making the sales Quotation and every sales Persons only making the quotaion
for the specified leads or customers.Suppose Sales Person 'A' makes the quotaiton for 5 Leads and Sales
Person 'B' makes the quotation for the different 5 persons.Now i want when i Login into sales person 'A' Login
and choose the Business Partner by pressing tab in sales quotation window , then that Sales Person 'A' can
see only the Specified BP list which are belonging to his region.
Thanks All.The access to Item Master and BP Master cannot be restricted to Users through Authorization. This is a known limitation of SBO.
You can try this by using SDK.
You can use Data Ownership Authorization, which means the marketing documents created by Sales Person 'A' will not be viewed by Sales Person 'B'
Refer this thread for details
[Customer master restriction in Marketing document.........; -
How to do the CRM Product Master Data extraction?
Hello guys,
I have to upload the CRM Product Master Data from a CRM 6.0 system to a BI 7.0 system.
The only information that I have is the infocube in the BI for the extraction is 0CRM_PROD.
I've checked that the CRM Product table COMM_PRODUCT and found that entries in the table and the infocube don't correspond to each other exactly. I also cannot find approprite DataSource in BI or CRM system for the data transfer.
Who can telll me anything about this kind of master data extraction to BI?
Thanks in advance.
Best RegardsHi,
u tried using the generic extraction using rso2.create one datasource and give the table name comm_prod.
bye. -
What is the Sequence of Master data and Transaction data R/3 to APO
Hi guys,
What is the Sequence of Master data and Transaction data R/3 to APO through CIF?Hi,
Master data,
Material Indipendent data can be sent without any dependency.
Material Dependent data sequence is as follow.
Plant,
MRP areas,
Supply area,
Material,
MRP area material,
planning material,
ATP check,
Purchase info recards,
schedule agg,
PPM or PDS (But before PPM or PDS work center should send to apo) If PDS is sending then BOM should send before PDS.
Transaction data.
As per the business requirement what is planning in apo.
Regards,
Kishore Reddy. -
Fm to create, modify delimit the records in master data for org mag
hi,
There is a fm hr_infotype_operation to create, modify, delimit the records for one infotype of pernrs.
Like this I want fm through which i can create, modify the records to master data of organisational management (OM). Whatever the infotype i will enter in that fm and data it will create a new record in OM master data.
If anybody know this, please tell me.
thanks & regards,
Sekhar.Hi,
Try RH_UPDATE_INFTY.
RH_INSERT_INFTY.
RH_DELETE_INFTY.
Regards,
Dilek -
Need to find out the number of Master data records transfered to the BW
Hi,
We need to find out the number of Master data (example -0MAT_PLANT_ATTR) records to be transfered to BW side. This is a delta extract. We are preparing test scripts to check the master data extract ( full & delta) from ECC6 TO BI 7.0..
Advance Thanks.Hi,
Goto RSA3 and run that master data extractor in D mode if you want to know the number of records in delta and in F mode if you want to know the Full volume. But make sure that you set data records/calls and the display extr calls numbers so that you get the total number of records.
The other option is goto the master data source table and look at the number of records in that table. That'll give you an idea of the total number of records in the table.
One other option is to goto RSA7 , select the delta datasource and hit the display button. You'll get to know the number of entries in the delta queue that way as well.
Cheers,
Kedar
Maybe you are looking for
-
How to check if a user has clicked on a digital control and changed its value?
Greetings !!! I am looking for a simple way (without using Windows messages)of knowing if an user has clicked on a digital control and changed its value. I have tried the key focus property; but I have to click twice to make it work. If somebody know
-
Feature Requests - Adobe Reader for Android
Adobe Reader for Android is a good start, it renders well (and renders 2 pages at a time), and the UI is nice, but there are some missing features. Please can we have the following features added in the next update; # Bookmark support, including the
-
Scope of ATP check (sales forecast)
Hi gurus, I want to know whether the info from sales forecast can be take into account by using standard ATP check function? thanks.
-
Calling Ranorex code in LabVIEW
I am testing the bluetooth feature of an infotainment system. For that I need to automate the UI operation on my mobile phone. I am thinking of using Ranorex tool for this purpose. My concern is, can the Ranorex scripts be called in LabVIEW through c
-
915P/G Combo driver problem
Good day I've recently purchased two 915P/G Combo mainboards and encountered problems when installing video and audio drivers. Also, for some strange reason, I cannot use your download manager to get updates. Could you provide me with direct links to