Checkboxes:check the dish in one table-it checks off ingredients in another

If you select a dish from a table of recipes (via checkbox) can you make it select all the ingredients for that dish from another table, your master ingredients list?
I think it has to do with Boolean true/false, but checkboxes seems weird to me...they dont act like normal formula cells.....
This would be really helpful for shopping/meal planning.........thanks

Create a new table .
In cell A1 grab the name of the selected dish
In column B insert formulas grabbing the required ingredients.
These formula would use the function VLOOKUP to extract the ingredients required for the dish whose name is in $A$1.
I'm not sure that checkboxes are the good tool to select the dish because it's easy to have several boxes checked in a single column.
I feel that using a popup menu would be a better soluce.
If you really want to use checkboxes, it would be good practice to create a table with a single cell containing a formula displaying an alert if more than one box is checked.
Yvan KOENIG (VALLAURIS, France) vendredi 5 mars 2010 22:02:42

Similar Messages

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

EXP: Export all tables for one user except the contents of one table

I need to export all tables (> 100 Tables) of an user except the contents of one table. Is there a possibility to call the EXP command and exclude the one table ??
Thanks in advance .-)
(Oracle11G)
Edited by: gromit on Feb 14, 2011 4:41 AM

It is not possible to perform it from a client. Is this correct? The datapump task itself can be started from a client, but - you are right - datapump is server-based. Especially that refers to the dumpfile location, which has to be defined as DIRECTORY on the server:
http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/dp_overview.htm#i1007107
Werner

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top, it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library option and check the Selected Artist - on

I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.

There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation.

Hide a column in one table view but show it in another

I need to hide a column in one tables view but show it in another table view in the same report. Is this possible?
Any help on this is appreciated.
Edited by: VNC on Jan 11, 2010 9:26 AM

Hi VNC,
If you're crafty with javascript, you could probably write a script that would set the CSS property DISPLAY to NONE to hide the column in the table view you didn't want but leave it there in the view you did want.
-Joe

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message

'"Connection Failed" : The server "rrnas01" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again' message keeps displaying whenever I try to open any Adobe CS5 applications (except for Adobe Acrobat Pro). It displays until I click "OK" about 15-20 times or so and then will finally let my program open.
I have tried deleting files within my Library/Preferences folder and turning off/deleting login items within my system preferences as other forums suggested but nothing happened. Spending 3.5 hours on the phone with Adobe and completely uninstalling and then reinstalling the entire CS5 Master Collection didn't work either.
Also, it may be helpful to know that my programs worked fine for about three weeks then when we got internet and changed the password (the join, not the adminstrative password) with the wireless network "ScubaSteve" (which I've used with no problems at my old apartment) it started acting up. I have never seen "rrnas01" before so I don't know at all where it came from. I also installed the free 30 day trial of Suitcase Fusion 3 recently, but thinking that could also be the cause I have uninstalled it, and still no help.
Please help me! And please keep in mind I don't know all the computer lingo that a lot of the people in these forums seem to know. Thanks in advance for ny help you can give me.

It may not be possible .. there is a major bug between Mountain Lion and the TC where the TC disk goes off the radar of the computer.
Lion is also affected but not as badly.
7.6.4 seems worse than earlier firmware.. so back to 7.6.1 or 7.5.2 if that is possible.
Obviously that is not a solution for a later Gen5 TC.
Reset to factory after the firmware downgrade. .use all network names that are short, no spaces and pure alphanumeric.
If the TC is the main router set the dhcp to a very short lease time.. eg 30min.. and see how it goes, or try a longer lease like 99days.
I prefer the very short lease but response has been mixed.
Use ethernet not wireless.. ethernet is always more reliable and stable than wireless.
And last .. a nightly electric timer that powers off every night at midnight for 1min.. would not be the first device we have suggested a fix that amounts to beat the unit to the punch by forcing it to reboot since it is unstable.

Check the server name or IP address, check your network connection, and the

Hi,
I'm getting this error message "Check the server name or IP address, check your network connection, and then try again" when I try to access my Windows computer on my home network. I never had problems before... I don't understand why this message suddenly appeared keeping me from accessing the shared folder on my XP based computer.
Thanks

Hedi ® wrote:
Hi,
I'm getting this error message "Check the server name or IP address, check your network connection, and then try again"
This means that your Mac is not seeing your WinBox, either by IP address (a series of four sets of three numbers which might look something like this: 192.168.001.010) or by name (usually a SMB connection, which would look something like this: 'smb://winboxname' where 'winboxname' is the name of your WinBox).
Typically this means that you were connected by IP, and the target's IP address has changed.
when I try to access my Windows computer on my home network. I never had problems before...
You probably have DHCP enabled on your home net, and your WnBox's IP address has changed because its old lease expired. That kind of thing is why you should set up your net to either have fixed IP addresses or to reserve a specific IP for a specific machine, or you should use the smb name instead of the IP.
I don't understand why this message suddenly appeared keeping me from accessing the shared folder on my XP based computer.
See above. If you want to connect by IP address, you'll need to know the WinBox's IP. Go to your Start menu, select the 'Run' box, type 'cmd', hit Enter. You'll get the Windows terminal. In the terminal type 'ipconfig/all'. You'll see the IP address (and the MAC address, useful if you want to set up a reserved IP address). Ensure that the Mac is connecting to that IP. (enter 'smb://theIP' in the network connection box.)
If you want to connect by name, you'll need to know the WinBox's name. Right-click on 'my computer', select 'properties'. Click on the 'computer name' tab. There it is. Use 'smb://computername' in the network connection box.
Thanks

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?

Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have??

Every time I try to connect to my 2TB Airport Time Capsule I get the following msg - "The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and

Every time I try to connect to my 2TB Airport Time Capsule I get the following message "The server may not exist or is unavailable at this time. Check the server name or IP address, check your network connection, and then try again." However, if I unplug it and then plug it in again, I can connect to it. How can this be corrected without having to unplug it all the time?

Are you using Yosemite??
This is stock standard yosemite bug and we have no simple fix for you..
You can fix it at its source..
Hack in DNS from Mavericks.. so Yosemite can be raised to a level of reliability above GHASTLY.. !!
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
Apple still have not fixed it.. and users are now sick and tired of the problem.. so have resorted to what can only be described as extreme measures.. in fact I wonder why people don't just revert to Mavericks.. or earlier.. whatever OS was reliable.. instead of seeing the latest greatest update as necessity.

How to check the content of cluster table smw3_bdoc1(00)

Hi!
I want to check the business partner changes sending via bdoc from crm to sap.
For this i want to look into the bdocs.
I think it's the cluster-table smw3_bdoc1.
'Cause i don't know which is the name of the structure in the clustd-field i use:
data: dirtab type table of cdir,
      wa_dirtab like line of dirtab.
import directory into dirtab from database
                                  smw3_bdoc1(00)
                                  id '49600667F6980046E1008002AC18C6E5'.
if sy-subrc = 0.
write / 'Directory:'.
loop at dirtab into wa_dirtab.
    write: / wa_dirtab-name, wa_dirtab-otype, wa_dirtab-ftype,
             wa_dirtab-tfill, wa_dirtab-fleng.
endloop.
else.
write 'Not found'.
endif.
So i've found the directory object "BDOC_BODY".
Now i want to read the content with:
data:   iclust type string.
loop at itbdocid.
     IMPORT BDOC_BODY = iclust FROM DATABASE smw3_bdoc1(00)
                                    ID itbdocid-bdoc_id.
endloop.
An error message raises with...
"error importing the object BDOC_BODY"
The dump tells me that object types of BDOC_BODY and iclust doesn't match.
I've changed the field iclust to type xstring... but it's the same error.
If somebody here can help... Thanks a lot!
Cheers, Ingo

Hi,
Thanks, I can see the data now.I am expecting that data should display in the 2LIS_VDKON extractor.There are two records for particular condition type.Item 10 and Item 20, but in RSA3, it is showing only one record for Item 20 and not showing for Item 10.
I have cleaned and filled the setup tables, but still no luck.
Can you please guide me, where else to look?
Thanks
Priya

How to check the locks in a table

Hi
Can any one tell me the commands to check the locks and get rid of the locks in a table.
Thanks and Reg
Debashis

v$lock
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/manproc.htm#sthref764

How to check the material consumption using tables

Hi,
I would like to know how to generate or view the material consumption at table level. Can anyone please specify the transactions codes and tables names how to check the consumption of material. I also like to know how to analysis the consumption of material between components and finished material. Please provide me the step by step wise how to do.Thanking you
Regards,
Sivaji Kumar Madhu Kiran

You can calculate material consumption in table MSEG. you will need to segregate the material documents based on movement types and then add or reduce the quantities of each material document. for example a material document with movement 101, add the quantity for the material, and when there is a issue material document like 201 or 221 reduce the quantity from the material stock.

Drop the Rules of one table from existing bi directional replication setup

Hi All,
I have one small question on bi directional replication setup, Its regarding table add in existing replication setup.
What happened ,When we add a new table to existing replication setup if any reason table is not replicating between two database even we are not getting
any error in dba_apply_error ,then we have to remove the rules for that particular table and setup again. Some time what happened we got error "queue has
errors" i dont know the ORA number. But in that case what happened Apply process ABORETED and when we try to start the process it gives same error
("Queue has errors" ) and ABORTED again.
then on metalink for doc id 203225.1 .we have remove the whole replication Manually and setup again. It's horriable....
Could you please help that before drop the rules for particular table from exisitng bi directional replication setup then wht should we do ?
Do we need to unscheduled the propagation process and then drop the rules becuase i read on metalink that reason behind the error ,queue has errors
"negative rules drops while propagation process using the same rule set" .
Please Suggest!!!!!!!!!!
Many Thanks

How huge those tables?. If those are small tables use Oracle MINUS function to get the defference records.

How to check the contents of MCVBAK table?

Hi all of you,
I am using MCVBAK table for extraction using LIS. The problem I am facing is when I am running the init load in BW for my IS S511, it is successfully running but in the monitor screens it says only 1 from 1 record. I thought that there are no records in the table MCVBAK so I wanted to make sure if there are really no records in MCVBAK table.
So I went to R/3 gave the T.C SE11 and entered the table MCVBAK to check its contents. But in the MCVBAK table what I find is the graphics button and contents button are invisible. My question is
How to find the contents of the table MCVBAK?
Please help.
Thank you,
Tristan.

Hi TR,
Yah, you need to check VBAK Table at SE11, Things that start with "MC...." are usually structures. Anther point, I want to mention is, When you schedule as Init load at the BW side, the system will get the data from S511 table(which is Information Structure table). So, you have do statistical setup first (at eg for sales Tcode is oli7) which will copy the records from VBAK table to your Information Structure (i.e S511).Only then, you can perform Init Load. Hope this Info help!
Regards,
Vj

Checkboxes:check the dish in one table-it checks off ingredients in another

Similar Messages

Maybe you are looking for